Start Location Missing

Hi,
When I send PO to SNC, ECC can send idoc to SNC,but SNC has problem. the issue is :start location missing. and ShipFromLocs is muti.
I check transprotation lane is ok.
how can I deal?
thanks again!
Cindy
Edited by: FangHua Lan on Nov 5, 2010 10:46 AM

Hi,
Thanks your reply.
I am new man for SNC.
1)What version of SNC are you working in? -
The version is SNC7.0.
2)What xml message are you using in SNC? -
Sorry I can't answer your question, can you help me how check ?
3) What is the error description in the log? -
the error :Assign Vendor '0000602292' muti ShipFromLocs( no single), can't determine start location for POXXXX/ITEM10.
4)Is the mapping done correctly in PI? --- Sorry I can't answer your question, how I can check?
I have a question: how to dtermine start location in the system?
thank again！

Similar Messages

Cannot locate missing media

I cannot locate missing media. When I try to locate it, and browse my computer I cannot find it

Have you deleted or renamed any directories on your computer, and you've checked the recycle bin/trash can in case they are in there ?
If it's not on your computer then do you have a backup of your library that you can copy the missing items back from, or do you have them on an iOS device to copy them from ? You can copy iTunes purchases back from a device via File > Devices > Transfer Purchases, or you might be able to redownload them via the Purchased section of your account (whether you can redownload them depends upon your country, the type of item, if they are still in the store, and if you've moved countries since buying them) - on the current version of iTunes (iTunes 12) click on your id towards the top right of the iTunes screen and then click Purchased on the popup :
For both copying back from a device and redownloading you will need to delete the entries from your iTunes library (where you are getting the 'unable to locate' message) for iTunes to allow you to do copy/redownload them.
To copy back from a device media that wasn't bought from iTunes you will need a third-party program on your computer to copy them back : Recover your iTunes library from your iPod or iOS device
Missing items : iTunes: Finding lost media and downloads - Apple Support

Storage location missing or incorrect Message no. L3432

Hi,
Previously the item we want to zero-in is under warehouse number WH1 under let's say plant 1000-storage location 1010. However this plant 1000 storage location 1010 was later on assigned to a new warehouse number WH2. During the migration period, this item was forgotten to be moved in the system from WH1 to WH2. Hence, we are trying to correct the quantity in WH1 now. However, when we try to post the count using LI11N, it is giving me Storage location missing or incorrect. How do we solve this?
If you have other suggestion on how to correct the quantity in WH1, please let me know. Thank you.

Hi Jackie,
Could you please perform the below steps?
1) Transaction SE51
Program SAPML03T, Screen number 0101 -> Element list -> Change
2) Select Tabstrip 'Special attr.', position the cursor on field LTAP-LGORT
and mark 'SET' parameter' and 'GET parameter'. Finally generate the screen.
Check this settings in your system and re-test.
BR,
Enrique

HT203175 How does one fix the problemd.... "application itunes helper.exe - mobile me service failed to start becasue missing MSVCR80.dll" ? This started after the last "update" of itunes

With a recent update of itunes, ( a couple weeks ago), when plugging in my iphone, itunes did not automatically launch...and when manually selecting itune to open I recieve the statement ...
"application itunes helper.exe - mobile me service failed to start becasue missing MSVCR80.dll" ?
I have gone to the itunes site and reloaded itunes....and did not fix the problem. ....help

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(100109)

Create Expense Report how do you make field 'Start Location' mandatory

Hi
We are using travel expenses within ESS and we wish to make the field 'Start location' mandatory. This field is on the mileage screen.
I have checked portal config and when you preview the iview and control/right click there is the option to make this field mandatory however this does not work.
I have checked the IMG config 'Schema and Field Control for the trip schema we are using but when I select the field 'PTRV_UTIL_KMVER-LOC_FROM' and select 'Alternative Display Type' the option 'Entry in field is required' does not become available for use.
Does anyone know how to achieve this?
Many thanks
Julie

Hi Julie,
You have modify the table T706Z1 to make both of this fields mandatory, this is the only
way to make the field mandatory. In standard system the fields
PTRV_UTIL_KMVER-LOC_FROM and PTRV_UTIL_KMVER-LOC_TO cannot be set to
mandatory. In this case you have to do some additional settings in the
in the table PTRV_T706Z_FLDS (se16):
PROG: PTRA_WEB_INTERFACE
DYNNR: 1800
RDYNNR: WEBE
Regards,
Raynard

Start location

Hi!
I wonder what is the start location when I launch JWS.
In fact, I'm trying to create a new File(".") and it appears to be on the home location.
Is it always the same behaviour?
Is it possible to specify it (like with a "basedir" tag in the jnlp file)?
Thanks,
a lost developer..

The curent directory, ( System.getproperty("user.dir"); ) is what any relative path would be relative to. Unfortunately, it isn't a very usefull location. If launching a webstart application from the browser, it will be the current dir from the browser, (either from the shrotcut the browser was started from, or from the shell the browser was started from ). If launching the webstart application from a shortcut, the user may have put in any directory as the directory the shortcut is launched from.
Is safer to make full path, it can be relative from the users home directory, by using t( System.getProperty("user'.home"); )
/Andy

Locating Missing or Offline photos

Lightroom 4 can't located missing or offline photos, any suggestions?

You need to connect the external hard drive, disk or thumb drive where the images are held.

Lightroom suggestion (locate missing files)

In the dialog for locate missing file, if the file name is different, would be nice on occasion to be able to select 'use original name' I am sure meta data can be compared to see if they are, if fact, the same image with just a different name
And how did I come about this thinking? Well, the HD of all my RAW images got totaly corrupted - to the point I have a recovery place recover the data from the HD. Did retrieve all 1900 RAW files - only no file structure, and the naming went like FIL1.NEF through FIL1900.NEF
Needless to say, this is a major undertaking renaming back to the orginal. The saved meta data is a big help to use the Create Date and time to ensure it is the right image from the catalog, but sure would be nice if all I had to do was point to that image and tell LR to use the orginal file name, not the new file name....

If and what steps to take depends on what happened to the images. LR doesn’t move or delete images without your telling it to.
If the images are on an external drive, perhaps the drive letter changes based on what else is also plugged into your computer.
Were the missing images moved somewhere else? You can use your OS file-searching capabilities to look for them.
Were the missing images deleted? Are they in the trash or recycle-bin?
Do you work with more than one LR catalog? Where you might have done a Move Import in one catalog of the same images that were already in another catalog and so that second import will move the images so that the LR catalog you did the first import to won’t be able to find them.

Locate missing folder with new hard drive

What is the best way to tell Lightroom 1.4 where all your files are if all of them have been moved from an internal drive to an external drive?
The condition I am concerned about is that after I have moved these files I do not see same ole folders in the Library module (aka folders of images in all the old folders on the hard drive)
I have just moved my all photos from an internal to an external hard drive. I have gone through a few image by image and "locate(d) missing file". I would like to be able to do a master or one time "locate missing file" or really locate missing folder to locate everything all at once.
Is it possible to "locate missing folder or file on a a big scale? The files are the same same names etc.

yes that concerns me to. In the past when I have moved folders around "re-arranged" files or folders, I have successfully located the missing folder (file) on the hard drive thus directing Lightroom to this new location and all the sub folders do "fall into place" Since this has not been my experience with thisnew hard drive I am just wondering if ....well just wondering if I should back up Lightroom take off computer and re-load the software. I do not know the possible consequences of this action.
I do not import the files into Lightroom.

How can I get PP CS4 to automatically locate missing assets?

Hello. I'm using CS4 on a Hewlett-Packard PC computer running a 64-bit Windows 7 operating system.
My computer recently crashed necessitating a visit to my friendly, local repair shop. When I got it back, I had to reload PP which I did but when I tried to start a project I was working on, I found that the folder where the assets were located was renamed, generating a "where is...?" dialogue box when I tried to open the project. I changed the folder's name back to what it was but PP was still unable to locate the assets. I tried locating all asked-for assets but there were just too many of them. What I need is for PP to locate them all automatically for me, once I point to the first one it asks for. I checked out a tutorial on this very topic and indeed there is a "locate others automatically" check box in the dialogue window but its for a Mac. On my PC there is no such check box. Is there some way I can get PP to locate the missing files automatically on my PC? Thanks for any help you can offer!

I used to be able to open DNG's in ACR just by double clicking them
Bridge preferences, general section. Under behavior put a checkmark in front of the option "double click edits Camera Raw settings in Bridge" and your back in business
Be aware that you can also use the right mouse click menu and choose open or open with... PSCS4 to open the files in Camera Raw via Photoshop. . While this is processing in the background you can select an other bunch in bridge and either double click or choose open in Camera raw and start a new series to edit in ACR via Bridge. So you can actually use them both together

CRASHES AT START UP -MISSING REQUIRED PLUGIN - BRS PENCIL TOOL

Can someone please help with this? I dont know what I did, but the BRS Pencil Tool plug in is missing from the illustrator filters in the plug in folder, and now I cant get illustrator to start. Illustrator goes through the start up process and at the end I get an error message saying "Missing required plug ins" "BRS pencil tool" and then Illustrator crashes. After that the "Crash Report" pops up. I've done a search for the missing file on my computer and nothing comes up. If I uninstall and reinstall will that fix the problem? And if I do reinstall will my previous CS2 work be safe? I tried to call Adobe, but since I don't have the serial number they refuse to help. Thanks Adobe!

If you are getting a message about the BRS pencil tool and you are using Windows Vista or XP, you may be missing an important font. For Vista users you are missing the Segoe-UI font. For XP users you are missing the Tahoma font. These fonts need to be installed on your system in order for Illustrator, Flash, Photoshop and InDesign to launch. Most of the other applications will give you a generic "application has stopped working" error when trying to launch.
Also, another clue is located inside the Event Viewer. For vista users, click on your start button and in the search area type "event", the event viewer will show in the results area, click on it and then click on "windows logs", then click on "application". For XP users, click Start, then Run and type "eventvwr" and hit enter, then click on "Application". By double-clicking on an error you will see the description for the problem. If the faulting module shows AdobeOwl.dll, you are most likely missing the font. You can do a google search for the font and they are available for download.

LOCATING MISSING FILES IN LR

When I click on the icon for a missing file, there is the option to click on "find nearby missing files." LR finds the file and a bar shows the "search for missing files has started. Howver it invariably gets stuck and never finds any other files. Each time, it starts but never finishes. If I relocate 10 files, I have 10 searches underway and nothing ever found. How do I solcve this problem?

It's not a problem moving the images in the OS. I do it all the time, as it's a lot faster than doing it from within LR.
Instead of doing individual images, right click on the folder instead. And use the top-most folder (farthest left) and it will do all the others below it, if you kept them in the same structure.
For example, if you have:
C:/My Pictures
     Holiday
     Whatever
         some other day
Then right clicking on My Picutres and browsing to the new location will "find" all of the folders below it.
Clicking on individual images will cause other problems, as when you find the folder, it will warn you about already having images in there.
I personally have my images down one level, instead of at the top (for example, C:), because then I can move the entire structure with one move and reconnect with one right-click.
Cheers!

Running workbook from .bat fails to start application missing CORE40 dll

I have been running several workbook via windows task scheduler / vbscript &/or bat files.
I now have a new box which I access thru Remote Desktop Connection, so I can run all these automated updates without having my screen blinking everytime a shedule workbook starts.
If I click on the actual Discoverer icon, or the discoverer workbook shortuct, all works well.
If I click on the .bat file, or try to run the workbook via the cmd , it gives me the following error:
DIS4USR.EXE – Unable To Locate Component
“this application has failed to start because CORE40.DLL was not found. Re-installing the application may fix this problem.”
The dll is under c/orant/bin/core40.dll, which is where I've read it should be, and it works fine in my regular box...
Please help! URGENT :)
Thanks!

Hello
Check the PATH environment variables for the machine you are on and the one you are connecting to.
You might not have Discoverer's objects in the PATH.
Another possibility is that you have more than one piece of ORACLE software on the machine and you may need to also set the ORACLE_HOME within the BAT file.
Best wishes
Michael

Visual Composer on SAP CE 7.1 fails to start with missing manifest file

Hi All,
I have installed a SAP NetWeaver Composition Environment 7.1 and deployed the configuration template for the complete stack. I wanted to access the VC on the following URL
   http://myhost:501000/VC
The login page appears and I enter a user with all needed privileges (Administrator) then the VC bails out with a popup message stating:
   Failed to open workspace due to the following error:
   Kits manifest is bad or missing
In the log directory of the cluster I found the following lines right before the first java exception that led to the VC failing to start.
    #000C29361F67001A00000002000005F801F890B616AD3BB1#1192131467531#com.sap.lcr.pers.jdbc.common.common.AbstractCRJdbcPersistence#sap.com/com.sap.lcr#com.sap.lcr.pers.jdbc.common.common.AbstractCRJdbcPersistence#Administrator#11#SAP J2EE Engine JTA Transaction : [0ffffffd8ffffffb5ffffff8a003ffffff83]###67b81480783111dcbfe7000c29361f67#Application [13]##0#0#Error##Plain###Thrown:
com.sap.sld.api.wbem.exception.CIMException: CIM_ERR_FAILED: The SQL statement "SELECT "APPL","NA_HASH","NA_KEY","TYP","ACTIVE","RANK","CL_START_ID","HOSTNAME","NAMESPACE" FROM "BC_SLD_NAMESP" WHERE "APPL" = ? AND "TYP" = ?" contains the semantics error[s]: - 1:116 - the table or view >>BC_SLD_NAMESP<< does not exist
Can anyone tell me on how to get that VC up and running? Did I forget something to deploy or did I miss a configuration step?
Any hint highly appreciated,
    Christian

I'm getting the same error and the freestyle.jsp does not help either.
By the way, the error posted above is related to the SLD, which is not installed with CE 7.1. I don't think that has anything to do with VC... Please correct me if I'm wrong.
Message was edited by:
        Pascal Willemsen

After restoring backup new macbook with time machine Firefox will not start. says missing profile

after restoring backup on new macbook with time machine Firefox will n to start. It says it is missing profile although profile exists and profile manager will not start. Also reinstalling does not help. Direct after starting Firefox it says profile is missing and then quits Firefox. Please help edit

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
* https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Start Location Missing

Similar Messages

Maybe you are looking for