Start managed server in a cluster fail
Hi,
I'm new in Oracle Weblogic, and I'm testing Weblogic 10.3.
I setup multiple IP in my laptop as follows:
10.0.0.183 devpc
10.0.2.183 node1
10.0.3.183 node2
And I configured a domain with Configuration Wizard as follows:
AdminServer
Listen Address:10.0.0.183
Listen Port:7001
ManagedServer_1
Machine:(none)
Cluster:Cluster_1
Listen Address:10.0.2.183
Listen Port:7001
ManagedServer_2
Machine:(none)
Cluster:Cluster_1
Listen Address:10.0.3.183
Listen Port:7001
When I started ManagedServer_1 with the command "*startManagedWebLogic.cmd ManagedServer_1 http://10.0.0.183:7001*",
managed server started to RUNNING state successfully, and after few seconds, I got these error.
+<Notice> <WebLogicServer> <devpc> <ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1239098617688> <BEA-000365> <Server state changed to RUNNING>+
+<Notice> <WebLogicServer> <devpc> <ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1239098617688> <BEA-000360> <Server started in RUNNING mode>+
+<Info> <J2EE> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098617703> <BEA-160151> <Registered library Extension-Name: bea_wls_async_response (JAR).>+
+<Error> <Cluster> <devpc> <ManagedServer_1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635062> <BEA-000170> <Server ManagedServer_1 did not receive the multicast packets that were sent by itself>+
+<Critical> <Health> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635062> <BEA-310006> <Critical Subsystem Cluster has failed. Setting server state to FAILED. Reason: Unable to receive self generated multicast messages>+
+<Critical> <WebLogicServer> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635078> <BEA-000385> <Server health failed. Reason: health of critical service 'Cluster' failed>+
+<Notice> <WebLogicServer> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635078> <BEA-000365> <Server state changed to FAILED>+
+<Error> <> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635234> <BEA-000000> <+
+===== FULL THREAD DUMP ===============+
Tue Apr 07 18:03:55 2009
BEA JRockit(R) R27.6.0-50_o-100423-1.6.0_05-20080626-2105-windows-ia32
+"Main Thread" id=1 idx=0x4 tid=2208 prio=5 alive, in native, waiting+
+-- Waiting for notification on: weblogic/t3/srvr/T3Srvr@0x09E9E9E8[fat lock]+
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at weblogic/t3/srvr/T3Srvr.waitForDeath(T3Srvr.java:811)
+^-- Lock released while waiting: weblogic/t3/srvr/T3Srvr@0x09E9E9E8[fat lock]+
at weblogic/t3/srvr/T3Srvr.run(T3Srvr.java:459)
at weblogic/Server.main(Server.java:67)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
+.+
+.+
+.+
How to fix it?
Thanks in advance.
Hi,
I changed the settings as follows:
AdminServer
Listen Address:devpc
Listen Port:7001
ManagedServer_1
Machine:(none)
Cluster:Cluster_1
Listen Address:node1
Listen Port:7001
ManagedServer_2
Machine:(none)
Cluster:Cluster_1
Listen Address:node2
Listen Port:7001
Cluster_1
Cluster Address:node1:7001,node2:7001
The exceptions still remained, any suggestions would be appreciated.
Similar Messages
-
Error starting managed server in a cluster
Hi,
Now am facing an issue while starting managed servers. Its only selective managed servers( 3 out of 8) . All are configured in the same way but the servers come to warning state after a restart.
The error is given below
<Emergency> AdminServer not reachable at http://192.44.12.147:7001
<Aug 5, 2010 2:43:53 PM EDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied
weblogic.security.SecurityInitializationException: Authentication for user denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Please let me know from where this error comes. The weblogic server is running in devleopment mode only. So not sure where the authentication failed. Also is there any problem with the configuration done??? I need to know the root cause so as to avoid in future. Also I cannot reboot the servers as and when desired (to solve the issue). Please help
Thanks,
Charan
Edited by: charan27 on Aug 6, 2010 12:59 AMHi Charan,
if your ManagedServers are not in Configured for MSI Mode (Managed Server Indepence Mode) then you wont be able to start your Servers until the AdminServer is Already Running. I can see that the Exception u pasted that...your AdminServer is not reachable....It may be due to AdminServer Vs ManagedServer BOX Network Issue or Your AdminServer might be down when u tried to start the ManagedServer.
Thanks
Jay SenSharma
http://weblogic-wonders.com/weblogic (WebLogic Wonders Are Here) -
Authentication Error while starting managed server ...
Hi everyone,
is there anyone to help me in avoiding the SecurityException while starting managed
server in a cluster. Weblogic version is 6.1.
I have started the admin server in a cluster and is running fine. Also cluster
is started successfully.
When I start managed server appManaged (which is also included in the cluster),
I get the following error:
Starting WebLogic Server ....
Connecting to http://appadmn:7001...
<Nov 20, 2003 11:05:56 AM EST> <Error> <Configuration Management> <Error connect
ing to admin server and initializing admin home: admin URL: t3://appadmin:7001
javax.naming.AuthenticationException. Root exception is java.lang.SecurityExcep
tion: attempting to add an object which is not an instance of java.security.Prin
cipal to a Subject's Principal Set
at javax.security.auth.Subject$SecureSet.add(Subject.java:1098)
at weblogic.common.internal.BootServicesStub.writeUserInfoToSubject(Boot
ServicesStub.java:72)
at weblogic.common.internal.BootServicesStub.authenticate(BootServicesSt
ub.java:80)
at weblogic.security.acl.internal.Security.authenticate(Security.java:10
8)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushUser(WLInitialConte
xtFactoryDelegate.java:461)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialCon
textFactoryDelegate.java:316)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:288)
at weblogic.jndi.Environment.getContext(Environment.java:155)
at weblogic.jndi.Environment.getInitialContext(Environment.java:138)
at weblogic.management.Admin.initializeRemoteAdminHome(Admin.java:951)
The start script for managed server appManaged is :
%JAVA_HOME%\bin\java -hotspot -ms64m -ms64m -classpath %CLASSPATH% -Dweblogic.Domain=mydomain
-Dweblogic.management.server=appadmin:7001 -Dweblogic.Name=appManaged -Dbea.home=%BEA_HOME%
-Dweblogic.management.username=system -Dweblogic.management.password=weblogic
-Dweblogic.ProductionModeEnabled=%STARTMODE% -Djava.security.auth.login.config==%
BEA_HOME%\wlserver6.1\lib\compat.config -Djava.security.policy==%BEA_HOME%\wlserver6.1\lib\weblogic.policy
-Dweblogic.management.discover=false weblogic.Server
thanks.
I could see calling to setDomainEnv.cmd script:
*@REM Call setDomainEnv here.*
set DOMAIN_HOME=D:\Perforce\weblogic1\dev\src_crmod\wls\mytest
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
set SAVE_CLASSPATH=%CLASSPATH%
But in my environment I do not see these variable set to any, JAVA_HOME, DERBY_CLASSPATH, JAVA_OPTIONS, CLASS_PATH.
This might be the issue? Or anything else? -
Help Please !!! Authentication error while starting managed server
Hi everyone,
is there anyone to help me in avoiding the SecurityException while starting managed
server in a cluster. Weblogic version is 6.1.
I have started the admin server in a cluster and is running fine. Also cluster
is started successfully.
When I start managed server appManaged (which is also included in the cluster),
I get the following error:
Starting WebLogic Server ....
Connecting to http://appadmn:7001...
<Nov 20, 2003 11:05:56 AM EST> <Error> <Configuration Management> <Error connect
ing to admin server and initializing admin home: admin URL: t3://appadmin:7001
javax.naming.AuthenticationException. Root exception is java.lang.SecurityExcep
tion: attempting to add an object which is not an instance of java.security.Prin
cipal to a Subject's Principal Set
at javax.security.auth.Subject$SecureSet.add(Subject.java:1098)
at weblogic.common.internal.BootServicesStub.writeUserInfoToSubject(Boot
ServicesStub.java:72)
at weblogic.common.internal.BootServicesStub.authenticate(BootServicesSt
ub.java:80)
at weblogic.security.acl.internal.Security.authenticate(Security.java:10
8)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushUser(WLInitialConte
xtFactoryDelegate.java:461)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialCon
textFactoryDelegate.java:316)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:288)
at weblogic.jndi.Environment.getContext(Environment.java:155)
at weblogic.jndi.Environment.getInitialContext(Environment.java:138)
at weblogic.management.Admin.initializeRemoteAdminHome(Admin.java:951)
The start script for managed server appManaged is :
%JAVA_HOME%\bin\java -hotspot -ms64m -ms64m -classpath %CLASSPATH% -Dweblogic.Domain=mydomain
-Dweblogic.management.server=appadmin:7001 -Dweblogic.Name=appManaged -Dbea.home=%BEA_HOME%
-Dweblogic.management.username=system -Dweblogic.management.password=weblogic
-Dweblogic.ProductionModeEnabled=%STARTMODE% -Djava.security.auth.login.config==%
BEA_HOME%\wlserver6.1\lib\compat.config -Djava.security.policy==%BEA_HOME%\wlserver6.1\lib\weblogic.policy
-Dweblogic.management.discover=false weblogic.Server
thanks.I could see calling to setDomainEnv.cmd script:
*@REM Call setDomainEnv here.*
set DOMAIN_HOME=D:\Perforce\weblogic1\dev\src_crmod\wls\mytest
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
set SAVE_CLASSPATH=%CLASSPATH%
But in my environment I do not see these variable set to any, JAVA_HOME, DERBY_CLASSPATH, JAVA_OPTIONS, CLASS_PATH.
This might be the issue? Or anything else? -
Problem starting managed server in Cluster
Hi,
I'm using cluster with 2 managed server. other managed server2 is runing ok in the cluster now when I am starting managed server1 in a cluster this error is coming
The WebLogic Server encountered a critical failure
Reason: Assertion violated
Exception in thread "main" java.lang.NoClassDefFoundError
at weblogic.protocol.ServerIdentityManager.findServerIdentity(ServerIdentityManager.java:65)
at weblogic.protocol.URLManager.findAdministrationURL(URLManager.java:170)
at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:677)
at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:406)
at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:392)
at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:172)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:373)
at weblogic.Server.main(Server.java:67)
Could you pl tell the reason of this error?
Thanks in advance
Hi,
Can anybody help?
Edited by: user10680571 on Dec 4, 2008 4:42 AMThanks David.
During starting this managed server in cluster when I do tail -f <log_file_name> I can see this error message. But this message I can't see in log however ending log details- Is this something related with CLASSPATH problem?
<04-Dec-2008 10:11:18 o'clock GMT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to t
he end of the classpath:
/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n-schemas.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_c
ommon.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wl
p/netuix_common.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/netuix_schemas.jar:/software/bea/wls/920/weblogic92/pla
tform/lib/wlp/netuix_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/wsrp-common.jar>
<04-Dec-2008 10:11:21 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Serve
r VM Version 1.5.0_07-b03 from Sun Microsystems Inc.>
<04-Dec-2008 10:11:33 o'clock GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 Fri Jun 23 20:47:26 EDT 20
06 783464 >
<04-Dec-2008 10:12:06 o'clock GMT> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /software/bea/wls/920/license.bea>
<04-Dec-2008 10:12:06 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<04-Dec-2008 10:12:06 o'clock GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<04-Dec-2008 12:12:26 o'clock GMT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to t
he end of the classpath:
/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n-schemas.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_c
ommon.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wl
p/netuix_common.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/netuix_schemas.jar:/software/bea/wls/920/weblogic92/pla
tform/lib/wlp/netuix_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/wsrp-common.jar>
<04-Dec-2008 12:12:35 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Serve
r VM Version 1.5.0_07-b03 from Sun Microsystems Inc.>
<04-Dec-2008 12:13:03 o'clock GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 Fri Jun 23 20:47:26 EDT 20
06 783464 >
<04-Dec-2008 12:13:56 o'clock GMT> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /software/bea/wls/920/license.bea>
<04-Dec-2008 12:13:58 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<04-Dec-2008 12:14:00 o'clock GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<05-Dec-2008 06:21:55 o'clock GMT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to t
he end of the classpath:
/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n-schemas.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_c
ommon.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wl
p/netuix_common.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/netuix_schemas.jar:/software/bea/wls/920/weblogic92/pla
tform/lib/wlp/netuix_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/wsrp-common.jar>
<05-Dec-2008 06:21:57 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Serve
r VM Version 1.5.0_07-b03 from Sun Microsystems Inc.>
<05-Dec-2008 06:22:04 o'clock GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 Fri Jun 23 20:47:26 EDT 20
06 783464 >
<05-Dec-2008 06:22:23 o'clock GMT> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /software/bea/wls/920/license.bea>
<05-Dec-2008 06:22:23 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<05-Dec-2008 06:22:23 o'clock GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
Thanks for your help..... -
Not able to start Managed server using nohup command and failed to authenticate weblogic user
Hi,
I stopped weblogic Admin server, managed server and opmnctl. and restarted Admin server successfully but I'm able to start managed start without nohup command. if I use nohup command then it's not able to get authenticate and faild to start managed server. I created boot.property file with weblogic user name and password still not working. is there anyother way to suppy login credentials for managed server?
how can I supply login credentials in below command?
nohup ./startManagedWebLogic.sh bi_server1 t3://machine:7001 > bis1_startup.log &
Appreciate you for your help
Thanks
Jay./app/obiee_11g/Oracle_BI1/jdk/bin/java -server -Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intrinsics -Dweblogic.Name=bi_server1 -Djava.security.policy=/app/obiee_11g/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Dweblogic.security.SSL.trustedCAKeyStore=/app/obiee_11g/wlserver_10.3/server/lib/cacerts -da -Dplatform.home=/app/obiee_11g/wlserver_10.3 -Dwls.home=/app/obiee_11g/wlserver_10.3/server -Dweblogic.home=/app/obiee_11g/wlserver_10.3/server -Dcommon.components.home=/app/obiee_11g/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/app/obiee_11g/user_projects/domains/bifoundation_domain -Djrockit.optfile=/app/obiee_11g/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/servers/bi_server1 -Doracle.domain.config.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/carml -Digf.arisidstack.home=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/servers/bi_server1/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/app/obiee_11g/oracle_common/modules/oracle.ossoiap_11.1.1,/app/obiee_11g/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dbi.oracle.home=/app/obiee_11g/Oracle_BI1 -DEPM_ORACLE_HOME=/app/obiee_11g/Oracle_BI1 -Dweblogic.MaxMessageSize=50000000 -DEPM_ORACLE_HOME=/app/obiee_11g/Oracle_BI1 -DHYPERION_HOME=/app/obiee_11g/Oracle_BI1 -DEPM_ORACLE_INSTANCE=novalue -Dhyperion.home=/app/obiee_11g/Oracle_BI1 -DEPM_REG_PROPERTIES_PATH=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig -Depm.useApplicationContextId=false -Doracle.biee.search.bisearchproperties=/app/obiee_11g/Oracle_BI1/bifoundation/jee/BISearchConfig.properties -Dweblogic.management.clearTextCredentialAccessEnabled=true -Doracle.notification.filewatching.interval=2000 -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.SSL.enableJSSE=true -Dfile.encoding=utf-8 -Doracle.ecsf.security.service=oracle.biee.search.security.BISearchSecurityService -Doracle.ecsf.configuration.class=oracle.biee.search.services.BISearchServiceConfiguration -Dxdo.server.config.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/bipublisher -DXDO_FONT_DIR=/app/obiee_11g/Oracle_BI1/common/fonts -Drtd.instanceName=RTD_bi_server1 -Dem.oracle.home=/app/obiee_11g/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=01scqabi01.natusmed.natus.com:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/app/obiee_11g/patch_wls1035/profiles/default/sysext_manifest_classpath weblogic.Server
<Nov 17, 2013 12:24:00 AM PST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Nov 17, 2013 12:24:00 AM PST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Nov 17, 2013 12:24:01 AM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.10-b01 from Sun Microsystems Inc.>
<Nov 17, 2013 12:24:07 AM PST> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:Error: Failed to get value from Standard Input
Enter password to boot WebLogic server:
<Nov 17, 2013 12:24:07 AM PST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Nov 17, 2013 12:24:09 AM PST> <Error> <Configuration Management> <BEA-150021> <The admin server failed to authenticate the identity of the user starting the managed server. The reason for the error is .>
<Nov 17, 2013 12:24:09 AM PST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://01scqabi01.natusmed.natus.com:7001.>
<Nov 17, 2013 12:24:09 AM PST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Nov 17, 2013 12:24:09 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 17, 2013 12:24:09 AM PST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 17, 2013 12:24:09 AM PST> <Notice> <Log Management> <BEA-170019> <The server log file /app/obiee_11g/user_projects/domains/bifoundation_domain/servers/bi_server1/logs/bi_server1.log is opened. All server side log events will be written to this file.>
<Nov 17, 2013 12:24:19 AM PST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 17, 2013 12:24:20 AM PST> <Critical> <Security> <BEA-090403> <Authentication for user denied>
<Nov 17, 2013 12:24:20 AM PST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied
weblogic.security.SecurityInitializationException: Authentication for user denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:965)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User javax.security.auth.login.LoginException: [Security:090301]Password Not Supplied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Nov 17, 2013 12:24:20 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Nov 17, 2013 12:24:20 AM PST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Nov 17, 2013 12:24:20 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN> -
Identity Management Install: 11g - Start Managed Server wls_ods1 failed
Hi All,
I am installing OAM 10.1.4.3 with Oracle Fusion Middleware 11g. I had installed and configured Only Oracle Internet Directory in an Existing WebLogic Administration Domain success. However, when I was configuring Oracle Directory Services Manager in an Existing WebLogic Administration Domain, I start Managed Servers failed.
C:\Program Files\Oracle\Inventory\logs\install2009-09-30_10-43-25AM.log
*** Starting WLServers and Apps if Any ...
In public start
DEBUG: trying to start for first time
*** ASWLServer.start ...
*** getDomainRuntimeMBeanServerConnection ...
*** Connecting to Domain runtime ...
trying to connect to hostname.test.com 7001
*** Successfully connected to the Domain Runtime ...
*** getDomainRuntimeMBeanServerConnection ...
*** Connecting to Domain runtime ...
trying to connect to hostname.test.com 7001
*** Successfully connected to the Domain Runtime ...
oracle.as.provisioning.util.ConfigException: Error Starting Managed Server wls_ods1.
Cause: An internal error has occured : Managed Server didn't start in RUNNING mode
Action: See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASWLServer._start(ASWLServer.java:1004)
at oracle.as.provisioning.weblogic.ASWLServer.start(ASWLServer.java:898)
at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:812)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:481)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:870)
at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:1133)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:82)
at java.lang.Thread.run(Thread.java:619)
progress in calculate progress3
In doCancel method ...
Your help is very appreciated.thanks.
Best,
Sunny.Zhang
Edited by: Sunny.Zhang on 2009-10-3 下午6:58Hi All,
It is same case with me :( , Unable to start managed server wls_ods1 during OIM 11g installation.
My base_domain is configured with the following
1) Oracle JRF 11.1.1.0 (For ADF runtime)
2) Oracle Identity Management - 11.1.1.2.0 (From OIM 11g)
The list of things are not yet configured
1) Oracle WSM Policy Manager - 11.1.1.0 (From OIM 11g)
2) Oracle WSM Policy Manager - 11.1.1.0 (From oracle_common)
3) Oracle JRF Webservices AsyncServices - 11.1.1.0(From OIM 11g)
4) Oracle JRF Webservices AsyncServices - 11.1.1.0(From oracle_common)
5) Oracle Enterprise Manager - 11.1.1.0 (From oracle_common)
I'm not sure, if I've to extend my domain for the Oracle WSM Policy Manager and/or Oracle Enterprise Manager. Or I have to check something else.
Please let me know if you have overcome this issue.
Thanks,
Harikiran -
Hi All,
I am trying to install OBIEE 11.1.1.7.1 un a Linux box, but during the Configuration Progress, OBIEE got error at Start Managed server; bi_server1.
Looking into install log I've found the following :
Done
Stopping Derby Server...
Starting AdminServer
Starting the domain ...
progress in calculate progress1
Executing Task: Starting Managed Server: bi_server1
oracle.as.install.bi.wls.ServerLifeCycleException: Failed to achieve state RUNNING in 3600seconds. The server is currently in state ADMIN
at oracle.as.install.bi.wls.ServerLifeCycle.waitForManagedWLSServerState(ServerLifeCycle.java:119)
at oracle.as.install.bi.wls.ServerLifeCycle.startServerSynchronous(ServerLifeCycle.java:59)
at oracle.as.install.bi.biconfig.standard.StartStopManagedServer.doExecute(StartStopManagedServer.java:55)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
What could be caussing this failure ?
ThanksI had similar issue in windows 7 [64 bit].
It is found that the nodemanger windows service was not present and I had to create it by executing installNodeMgrSvc.cmd present in wls server location say, 'C:\Oracle\Middleware\wlserver_10.3\server\bin' in my case and then come to bi wls console and 'Resume' the bi_server1 managed server. You would see progress in the installer once the managed server bi_server1 is 'Running' state.
Hope this helps. -
Hi
Gurus, please help me ,before i have OBIEE 11.1.1.5 now i try to change OBIEE 11.1.1.6 at installing time *"Starting Managed Server: bi_server1" failed* in configuration process.
please help me.
Thanks,I had similar issue in windows 7 [64 bit].
It is found that the nodemanger windows service was not present and I had to create it by executing installNodeMgrSvc.cmd present in wls server location say, 'C:\Oracle\Middleware\wlserver_10.3\server\bin' in my case and then come to bi wls console and 'Resume' the bi_server1 managed server. You would see progress in the installer once the managed server bi_server1 is 'Running' state.
Hope this helps. -
Getting error while starting Managed server in clustered environment
Hi All,
I created a cluster in weblogic 9.2 and two manged servers under that cluster through WLST scripts.
I started Node manager through connecting WLST and now when i am starting the managed servers its giving the following error :
wls:/Dist_3/serverConfig> start('managed1','Server')
Starting server managed1 ....NMProcess: <Jan 30, 2009 2:57:27 PM> <Warning> <I/O
error while reading domain directory: java.io.FileNotFoundException: Domain dir
ectory 'C:\bea\weblogic92\common\bin' invalid (domain salt file not found)>
NMProcess: java.io.FileNotFoundException: Domain directory 'C:\bea\weblogic92\co
mmon\bin' invalid (domain salt file not found)
NMProcess: at weblogic.nodemanager.server.DomainManager.initialize(DomainMa
nager.java:80)
NMProcess: at weblogic.nodemanager.server.DomainManager.<init>(DomainManage
r.java:52)
NMProcess: at weblogic.nodemanager.server.NMServer.getDomainManager(NMServe
r.java:242)
NMProcess: at weblogic.nodemanager.server.Handler.handleDomain(Handler.java
:212)
NMProcess: at weblogic.nodemanager.server.Handler.handleCommand(Handler.jav
a:105)
NMProcess: at weblogic.nodemanager.server.Handler.run(Handler.java:66)
NMProcess: at java.lang.Thread.run(Thread.java:595)
NMProcess:
I/O error while reading domain directory: java.io.FileNotFoundException: Domain
directory 'C:\bea\weblogic92\common\bin' invalid (domain salt file not found)
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 1250, in start
WLSTException: 'Error occured while performing start : Error starting the server
Error occured while performing start : Server with name managed1 failed to be st
arted Use dumpStack() to view the full stacktrace'
wls:/Dist_3/serverConfig> start('managed2','Server')
Starting server managed2 ....NMProcess: <Jan 30, 2009 3:05:51 PM> <Warning> <I/O
error while reading domain directory: java.io.FileNotFoundException: Domain dir
ectory 'C:\bea\weblogic92\common\bin' invalid (domain salt file not found)>
NMProcess: java.io.FileNotFoundException: Domain directory 'C:\bea\weblogic92\co
mmon\bin' invalid (domain salt file not found)
NMProcess: at weblogic.nodemanager.server.DomainManager.initialize(DomainMa
nager.java:80)
NMProcess: at weblogic.nodemanager.server.DomainManager.<init>(DomainManage
r.java:52)
NMProcess: at weblogic.nodemanager.server.NMServer.getDomainManager(NMServe
r.java:242)
NMProcess: at weblogic.nodemanager.server.Handler.handleDomain(Handler.java
:212)
NMProcess: at weblogic.nodemanager.server.Handler.handleCommand(Handler.jav
a:105)
NMProcess: at weblogic.nodemanager.server.Handler.run(Handler.java:66)
NMProcess: at java.lang.Thread.run(Thread.java:595)
NMProcess:
I/O error while reading domain directory: java.io.FileNotFoundException: Domain
directory 'C:\bea\weblogic92\common\bin' invalid (domain salt file not found)
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 1250, in start
WLSTException: 'Error occured while performing start : Error starting the server
Error occured while performing start : Server with name managed2 failed to be st
arted Use dumpStack() to view the full stacktrace'
wls:/Dist_3/serverConfig>hi kartheek,
i think u just missed some of steps while starting managed server using nodemanager in WLST.
If u dont mind i'm sending some of steps just check it out. Once u try the same steps.
1.start the ADMIN SERVER
2.start the WLST
java weblogic.WLST
3.Connect to AdminServer
connect('username',password','t3://adminhost:listenport')
example: connect('weblogic','weblogic','t3://localhost:7001')
4.start the nodemanager in WLST
startNodeManager()
5.connect to nodemanager
nmConnect('username','password','nodemanagerhost',
'nodemanagerlistenport','domainname','path to domain')
example: nmConnect('weblogic','weblogic','localhost','5556','base_domain'
'C:/bea/user_projects/domains/base_domain')
6.start the managed server in WLST
start('managedservername','Type','t3://managedhost:listenport')
example:start('man1','Server','t3://localhost:7003')
7.If u want to start cluster in WLST
start('clustername','Type')
example: start('cluster1','Cluster')
If u want to start managed in Cluster u follow STEP-6 only
regards
abhi -
Unable to start Manager server using Node Manager
Hi,
I have deployed Admin server in one of my unix machine(machine1) and i able to start my Admin server using node manager, and when i try to start my Managed server in another machine(machine2) using the node manager(that machine node manager) its throwing error;
Note: am able to start Managed server using Adminurl and able to connect to Managed server node manager successfully,
but not able to start Managed server using node manager
its giving exception as below;
error:- wls:/nm/webdomain> nmStart('ms1')
Starting server ms1 ...
Error Starting server ms1: weblogic.nodemanager.NMException: Exception while starting server 'ms1'
Managed server log: -
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
[root@LinuxVM ~]# cat /root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00071
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Starting WebLogic server with command line: /root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/bin/java -Dweblogic.Name=ms1 -Dbea.home=/root/Oracle/Middleware -Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Djava.library.path="/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386/jrockit:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/../lib/i386:/root/Oracle/Middleware/patch_wls1035/profiles/default/native:/root/Oracle/Middleware/patch_ocp360/profiles/default/native:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/root/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/lib/tools.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/root/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/root/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/root/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/root/Oracle/Middleware -Dweblogic.system.BootIdentityFile=/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true weblogic.Server >
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
Nodemanager log:
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Rotated server output log to "/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00070">
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server error log also redirected to server log>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Starting WebLogic server with command line: /root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/bin/java -Dweblogic.Name=ms1 -Dbea.home=/root/Oracle/Middleware -Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Djava.library.path="/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386/jrockit:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/../lib/i386:/root/Oracle/Middleware/patch_wls1035/profiles/default/native:/root/Oracle/Middleware/patch_ocp360/profiles/default/native:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/root/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/lib/tools.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/root/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/root/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/root/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/root/Oracle/Middleware -Dweblogic.system.BootIdentityFile=/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true weblogic.Server >
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Rotated server output log to "/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00071">
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server error log also redirected to server log>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server output log file is '/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out'>
<Dec 13, 2011 3:40:26 PM> <INFO> <webdomain> <ms1> <Server failed during startup so will not be restarted>
<Dec 13, 2011 3:40:26 PM> <WARNING> <Exception while starting server 'ms1'>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.AbstractServerManager.start(AbstractServerManager.java:200)
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:23)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:604)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:71)
at java.lang.Thread.run(Thread.java:662)You can start a managed server as follows:
print 'START NODE MANAGER';
startNodeManager(verbose='true', NodeManagerHome=nodemanagerhomelocation, ListenPort='5556', ListenAddress='localhost');
print 'CONNECT TO NODE MANAGER';
nmConnect(adminusername, adminpassword, 'localhost', '5556', domainname, domainlocation, 'ssl');
print 'START ADMIN SERVER';
nmStart('AdminServer');
nmServerStatus('AdminServer');
print 'CONNECT TO ADMIN SERVER';
connect(adminusername, adminpassword);
print 'START MANAGED SERVER';
start('VideotheekWebServer','Server');
nmServerStatus('VideotheekWebServer');
print 'START CLUSTER';
start('VideotheekCluster','Cluster');
nmServerStatus('VideotheekServer1');
nmServerStatus('VideotheekServer2');JVM properties are set using the admin console and edit the startup properties of your managed server (configuration, server start).
The properties file (startup.properties) is saved in the directory <domain-home>/servers/<server-name>/data/nodemanager. -
Error in Starting Managed Server
Hi,
I have installed Oracle webcenter Portal 11g on my local machine.
Started admin server successfully
url: http://localhost:7001/console
When i tried starting Managed server WC_Spaces,WC_Portlet,WC_Collaboration & WC_Utilities.
Am getting error as "<BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
weblogic.security.SecurityInitializationException: Authentication for user weblogic denied"
Whole error log copied below.
####<28 Oct, 2013 4:46:41 PM IST> <Critical> <Security> <BDC4B-D-5PKRWQ1> <WC_Spaces> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1382959001849> <BEA-090403> <Authentication for user weblogic denied>
####<28 Oct, 2013 4:46:41 PM IST> <Critical> <WebLogicServer> <BDC4B-D-5PKRWQ1> <WC_Spaces> <main> <<WLS Kernel>> <> <> <1382959001850> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:966)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User weblogic weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at $Proxy36.login(Unknown Source)
at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at $Proxy54.authenticate(Unknown Source)
at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:338)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:930)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Any one has come accross this kind of issue.
Thanks,
ARHi ,
This is just to confirm , when you started AdminServer for first time , did you create boot.properties file yourself ? . Second are you able to log in to Admin Console using the same username/pwd ? Also are you able to start manage servers from AdminServer console ?
Thanks -
Error while starting manages server
Hi All.
M facing problem while starting managed server, this might be related to sip server as i see this in the error log. when i click on the sip server tab in the console then io see below error :-
+++++++++
Error opening /ext-jsp/sipserver/ConfigGeneralForm.jsp.
The source of this error is:
javax.servlet.ServletException: weblogic.servlet.jsp.CompilationException: Failed to compile JSP /ext-jsp/sipserver/ConfigGeneralForm.jsp
Exception occurred while processing '/bea/wls/user_projects/domains/base_domain/servers/AdminServer/tmp/_WL_internal/consoleapp/jxhze9/console-ext/sipserver-console-ext/ext-jsp/sipserver/ConfigGeneralForm.jsp'java.lang.OutOfMemoryError: PermGen space
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:791)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:142)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:449)
at java.net.URLClassLoader.access$100(URLClassLoader.java:71)
at java.net.URLClassLoader$1.run(URLClassLoader.java:361)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
at com.bea.core.repackaged.jdt.internal.compiler.lookup.CompilationUnitScope.buildTypeBindings(CompilationUnitScope.java:67)
at com.bea.core.repackaged.jdt.internal.compiler.lookup.LookupEnvironment.buildTypeBindings(LookupEnvironment.java:152)
at com.bea.core.repackaged.jdt.internal.compiler.Compiler.internalBeginToCompile(Compiler.java:717)
at com.bea.core.repackaged.jdt.internal.compiler.Compiler.beginToCompile(Compiler.java:377)
at com.bea.core.repackaged.jdt.internal.compiler.Compiler.compile(Compiler.java:422)
at weblogic.jsp.internal.java.JDTJavaCompiler.generateByteCode(JDTJavaCompiler.java:104)
at weblogic.jsp.internal.java.JavaSourceFile._codeGen(JavaSourceFile.java:211)
at weblogic.jsp.internal.java.JavaSourceFile.codeGen(JavaSourceFile.java:201)
at weblogic.jsp.internal.ProxySourceFile.compileGeneratedFiles(ProxySourceFile.java:310)
at weblogic.jsp.internal.ProxySourceFile.codeGen(ProxySourceFile.java:248)
at weblogic.jsp.internal.SourceFile.codeGen(SourceFile.java:327)
at weblogic.jsp.internal.client.ClientUtilsImpl$CodeGenJob.run(ClientUtilsImpl.java:599)
at weblogic.jsp.internal.client.Job.performJob(Job.java:83)
at weblogic.jsp.internal.client.ThreadPool$WorkerThread.run(ThreadPool.java:217)
Caused by: weblogic.servlet.jsp.CompilationException: Failed to compile JSP /ext-jsp/sipserver/ConfigGeneralForm.jsp
Exception occurred while processing '/bea/wls/user_projects/domains/base_domain/servers/AdminServer/tmp/_WL_internal/consoleapp/jxhze9/console-ext/sipserver-console-ext/ext-jsp/sipserver/ConfigGeneralForm.jsp'java.lang.OutOfMemoryError: PermGen space
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:791)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:142)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:449)
at java.net.URLClassLoader.access$100(URLClassLoader.java:71)
at java.net.URLClassLoader$1.run(URLClassLoader.java:361)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
at com.bea.core.repackaged.jdt.internal.compiler.lookup.CompilationUnitScope.buildTypeBindings(CompilationUnitScope.java:67)
at com.bea.core.repackaged.jdt.internal.compiler.lookup.LookupEnvironment.buildTypeBindings(LookupEnvironment.java:152)
at com.bea.core.repackaged.jdt.internal.compiler.Compiler.internalBeginToCompile(Compiler.java:717)
at com.bea.core.repackaged.jdt.internal.compiler.Compiler.beginToCompile(Compiler.java:377)
at com.bea.core.repackaged.jdt.internal.compiler.Compiler.compile(Compiler.java:422)
at weblogic.jsp.internal.java.JDTJavaCompiler.generateByteCode(JDTJavaCompiler.java:104)
at weblogic.jsp.internal.java.JavaSourceFile._codeGen(JavaSourceFile.java:211)
at weblogic.jsp.internal.java.JavaSourceFile.codeGen(JavaSourceFile.java:201)
at weblogic.jsp.internal.ProxySourceFile.compileGeneratedFiles(ProxySourceFile.java:310)
at weblogic.jsp.internal.ProxySourceFile.codeGen(ProxySourceFile.java:248)
at weblogic.jsp.internal.SourceFile.codeGen(SourceFile.java:327)
at weblogic.jsp.internal.client.ClientUtilsImpl$CodeGenJob.run(ClientUtilsImpl.java:599)
at weblogic.jsp.internal.client.Job.performJob(Job.java:83)
at weblogic.jsp.internal.client.ThreadPool$WorkerThread.run(ThreadPool.java:217)
at weblogic.servlet.jsp.JavelinxJSPStub.reportCompilationErrorIfNeccessary(JavelinxJSPStub.java:226)
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:162)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:243)
... 184 more
++++++++
Below is the config.xml file i am using :-
<?xml version="1.0" encoding="UTF-8"?>
<domain xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd" xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<name>base_domain</name>
<domain-version>10.3.4.0</domain-version>
<security-configuration xmlns:xacml="http://xmlns.oracle.com/weblogic/security/xacml" xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator">
<name>base_domain</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"/>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xsi:type="xacml:xacml-role-mapperType"/>
<sec:authorizer xsi:type="xacml:xacml-authorizerType"/>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"/>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"/>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"/>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
<sec:password-validator xsi:type="pas:system-password-validatorType">
<sec:name>SystemPasswordValidator</sec:name>
<pas:min-password-length>8</pas:min-password-length>
<pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
</sec:password-validator>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>{AES}Ax9F8YRCZJqRRoPcjJxTwS03NgNAJSUjUcQ0vMJybMfkxNKN3YZCRsR+jEQrT/n3/KU4Kn5WXqCILWifqYRDlmnGGryHuNEEK83B/FCoBb1h8T47+ML1pULyyNpGPaFq</credential-encrypted>
<node-manager-username>weblogic</node-manager-username>
<node-manager-password-encrypted>{AES}G0nkKdRHqwIqNXGqn7lArIXG1SfKKdkWwTOyZ4SmkwE=</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<self-tuning-thread-pool-size-min>15</self-tuning-thread-pool-size-min>
<socket-readers>2</socket-readers>
<ssl>
<name>AdminServer</name>
<enabled>true</enabled>
</ssl>
<machine>Machine_1</machine>
<listen-address/>
<network-access-point>
<name>sip</name>
<protocol>sip</protocol>
<listen-port>5060</listen-port>
<public-port>5060</public-port>
<http-enabled-for-this-protocol>false</http-enabled-for-this-protocol>
<outbound-enabled>true</outbound-enabled>
</network-access-point>
<network-access-point>
<name>sips</name>
<protocol>sips</protocol>
<listen-port>5061</listen-port>
<public-port>5061</public-port>
<http-enabled-for-this-protocol>false</http-enabled-for-this-protocol>
<outbound-enabled>true</outbound-enabled>
</network-access-point>
</server>
<server>
<name>M1</name>
<ssl>
<name>M1</name>
<enabled>true</enabled>
<listen-port>7503</listen-port>
</ssl>
<machine>Machine_1</machine>
<listen-port>7003</listen-port>
<listen-address/>
<web-service>
<name>M1</name>
<web-service-persistence>
<name>M1</name>
<web-service-logical-store>
<name>WseeStore</name>
<persistence-strategy>LOCAL_ACCESS_ONLY</persistence-strategy>
<request-buffering-queue-jndi-name>weblogic.wsee.BufferedRequestQueue</request-buffering-queue-jndi-name>
<response-buffering-queue-jndi-name>weblogic.wsee.BufferedResponseQueue</response-buffering-queue-jndi-name>
</web-service-logical-store>
</web-service-persistence>
</web-service>
</server>
<server>
<name>M2</name>
<ssl>
<name>M2</name>
<enabled>true</enabled>
<listen-port>7504</listen-port>
</ssl>
<machine>Machine_1</machine>
<listen-port>7004</listen-port>
<listen-address/>
<web-service>
<name>M2</name>
<web-service-persistence>
<name>M2</name>
<web-service-logical-store>
<name>WseeStore</name>
<persistence-strategy>LOCAL_ACCESS_ONLY</persistence-strategy>
<request-buffering-queue-jndi-name>weblogic.wsee.BufferedRequestQueue</request-buffering-queue-jndi-name>
<response-buffering-queue-jndi-name>weblogic.wsee.BufferedResponseQueue</response-buffering-queue-jndi-name>
</web-service-logical-store>
</web-service-persistence>
</web-service>
</server>
<embedded-ldap>
<name>base_domain</name>
<credential-encrypted>{AES}vWDbFLBCN+g/5kGlFyC+Qp8NUIevNXYQEJYBVgoM2BaXRBIGnLy+rHfLzGrQT5JG</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.4.0</configuration-version>
<machine xsi:type="unix-machineType">
<name>Machine_1</name>
<node-manager>
<name>Machine_1</name>
<listen-address>localhost</listen-address>
</node-manager>
</machine>
<jms-server>
<name>WseeJmsServer_auto_2</name>
<target>M1</target>
<persistent-store>WseeFileStore_auto_2</persistent-store>
</jms-server>
<jms-server>
<name>WseeJmsServer_auto_3</name>
<target>M2</target>
<persistent-store>WseeFileStore_auto_3</persistent-store>
</jms-server>
<jms-server>
<name>WseeJaxwsJmsServer_auto_2</name>
<target>M1</target>
<persistent-store>WseeJaxwsFileStore_auto_2</persistent-store>
</jms-server>
<jms-server>
<name>WseeJaxwsJmsServer_auto_3</name>
<target>M2</target>
<persistent-store>WseeJaxwsFileStore_auto_3</persistent-store>
</jms-server>
<self-tuning>
<fair-share-request-class>
<name>wlss.transport.fsrc</name>
<target>M1,M2</target>
<fair-share>50</fair-share>
</fair-share-request-class>
<fair-share-request-class>
<name>wlss.timer.fsrc</name>
<target>M1,M2</target>
<fair-share>100</fair-share>
</fair-share-request-class>
<fair-share-request-class>
<name>wlss.tracing.fsrc</name>
<target>M1,M2</target>
<fair-share>50</fair-share>
</fair-share-request-class>
<fair-share-request-class>
<name>wlss.connect.fsrc</name>
<target>M1,M2</target>
<fair-share>1000</fair-share>
</fair-share-request-class>
<min-threads-constraint>
<name>wlss.tracing.minthreads</name>
<target>M1,M2</target>
<count>1</count>
</min-threads-constraint>
<min-threads-constraint>
<name>wlss.connect.minthreads</name>
<target>M1,M2</target>
<count>1</count>
</min-threads-constraint>
<max-threads-constraint>
<name>wlss.timer.maxthreads</name>
<target>M1,M2</target>
<count>16</count>
<connection-pool-name/>
</max-threads-constraint>
<max-threads-constraint>
<name>wlss.tracing.maxthreads</name>
<target>M1,M2</target>
<count>1</count>
<connection-pool-name/>
</max-threads-constraint>
<capacity>
<name>wlss.transport.capacity</name>
<target>M1,M2</target>
<count>400</count>
</capacity>
<capacity>
<name>wlss.timer.capacity</name>
<target>M1,M2</target>
<count>256</count>
</capacity>
<work-manager>
<name>wlss.transport</name>
<target>M1,M2</target>
<fair-share-request-class>wlss.transport.fsrc</fair-share-request-class>
<response-time-request-class xsi:nil="true"/>
<context-request-class xsi:nil="true"/>
<capacity>wlss.transport.capacity</capacity>
<ignore-stuck-threads>false</ignore-stuck-threads>
</work-manager>
<work-manager>
<name>wlss.timer</name>
<target>M1,M2</target>
<fair-share-request-class>wlss.timer.fsrc</fair-share-request-class>
<response-time-request-class xsi:nil="true"/>
<context-request-class xsi:nil="true"/>
<max-threads-constraint>wlss.timer.maxthreads</max-threads-constraint>
<capacity>wlss.timer.capacity</capacity>
<ignore-stuck-threads>false</ignore-stuck-threads>
</work-manager>
<work-manager>
<name>wlss.tracing.domain</name>
<target>M1,M2</target>
<fair-share-request-class>wlss.tracing.fsrc</fair-share-request-class>
<min-threads-constraint>wlss.tracing.minthreads</min-threads-constraint>
<max-threads-constraint>wlss.tracing.maxthreads</max-threads-constraint>
<ignore-stuck-threads>false</ignore-stuck-threads>
</work-manager>
<work-manager>
<name>wlss.tracing.local</name>
<target>M1,M2</target>
<fair-share-request-class>wlss.tracing.fsrc</fair-share-request-class>
<response-time-request-class xsi:nil="true"/>
<context-request-class xsi:nil="true"/>
<min-threads-constraint>wlss.tracing.minthreads</min-threads-constraint>
<max-threads-constraint>wlss.tracing.maxthreads</max-threads-constraint>
<ignore-stuck-threads>false</ignore-stuck-threads>
</work-manager>
<work-manager>
<name>wlss.connect</name>
<target>M1,M2</target>
<fair-share-request-class>wlss.connect.fsrc</fair-share-request-class>
<response-time-request-class xsi:nil="true"/>
<context-request-class xsi:nil="true"/>
<min-threads-constraint>wlss.connect.minthreads</min-threads-constraint>
<ignore-stuck-threads>false</ignore-stuck-threads>
</work-manager>
<work-manager>
<name>weblogic.wsee.mdb.DispatchPolicy</name>
<target>M1,M2</target>
</work-manager>
<work-manager>
<name>weblogic.wsee.jaxws.mdb.DispatchPolicy</name>
<target>M1, M2</target>
</work-manager>
</self-tuning>
<file-store>
<name>WseeFileStore_auto_2</name>
<directory>WseeFileStore_auto_2</directory>
<target>M1</target>
</file-store>
<file-store>
<name>WseeFileStore_auto_3</name>
<directory>WseeFileStore_auto_3</directory>
<target>M2</target>
</file-store>
<file-store>
<name>WseeJaxwsFileStore_auto_2</name>
<directory>WseeJaxwsFileStore_auto_2</directory>
<target>M1</target>
</file-store>
<file-store>
<name>WseeJaxwsFileStore_auto_3</name>
<directory>WseeJaxwsFileStore_auto_3</directory>
<target>M2</target>
</file-store>
<file-store>
<name>WseeFileStore</name>
<directory>WseeFileStore</directory>
<target>AdminServer</target>
</file-store>
<jms-system-resource>
<name>WseeJmsModule</name>
<target>M1,M2</target>
<sub-deployment>
<name>WseeJmsServer9127702</name>
<target>WseeJmsServer_auto_2</target>
</sub-deployment>
<sub-deployment>
<name>WseeJmsServer20604610</name>
<target>WseeJmsServer_auto_3</target>
</sub-deployment>
<descriptor-file-name>jms/wseejmsmodule-jms.xml</descriptor-file-name>
</jms-system-resource>
<jms-system-resource>
<name>WseeJaxwsJmsModule</name>
<target>M1,M2</target>
<sub-deployment>
<name>WseeJaxwsJmsServer31278546</name>
<target>WseeJaxwsJmsServer_auto_2</target>
</sub-deployment>
<sub-deployment>
<name>WseeJaxwsJmsServer7750867</name>
<target>WseeJaxwsJmsServer_auto_3</target>
</sub-deployment>
<descriptor-file-name>jms/wseejaxwsjmsmodule-jms.xml</descriptor-file-name>
</jms-system-resource>
<custom-resource>
<name>sipserver</name>
<target>M1,M2</target>
<descriptor-file-name>custom/sipserver.xml</descriptor-file-name>
<resource-class>com.bea.wcp.sip.management.descriptor.resource.SipServerResource</resource-class>
<descriptor-bean-class>com.bea.wcp.sip.management.descriptor.beans.SipServerBean</descriptor-bean-class>
</custom-resource>
<admin-server-name>AdminServer</admin-server-name>
<saf-agent>
<name>ReliableWseeSAFAgent</name>
<target>AdminServer</target>
<store>WseeFileStore</store>
</saf-agent>
<saf-agent>
<name>ReliableWseeJaxwsSAFAgent_M1</name>
<target>M1</target>
<store>WseeJaxwsFileStore_auto_2</store>
</saf-agent>
<saf-agent>
<name>ReliableWseeJaxwsSAFAgent_M2</name>
<target>M2</target>
<store>WseeJaxwsFileStore_auto_3</store>
</saf-agent>
</domain>
Can someone please helpme here..I tried same and facing below error whenever i click on any tab over the console :-
Error opening /jsp/core/server/ServersControlTable.jsp
The source of this error is:
java.lang.OutOfMemoryError: PermGen space
++++++++
below is the MEm_ARGS in commEnv.sh :-
# This script is used to set up a common environment for starting WebLogic
# Server, as well as WebLogic development.
# It sets the following variables:
# BEA_HOME - The home directory of all your BEA installation.
# MW_HOME - The home directory of all your Oracle installation.
# WL_HOME - The root directory of the BEA installation.
# COHERENCE_HOME - The root directory of the COHERENCE installation.
# ANT_HOME - The Ant Home directory.
# ANT_CONTRIB - The Ant contrib directory
# JAVA_HOME - Location of the version of Java used to start WebLogic
# Server. See the Oracle Fusion Middleware Supported System Configurations page
# (http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html) for an
# up-to-date list of supported JVMs on your platform.
# JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
# JAVA_USE_64BIT - Indicates if JVM uses 64 bit operations
# PATH - JDK and WebLogic directories will be added to the system
# path.
# WEBLOGIC_CLASSPATH - Classpath required to start WebLogic Server.
# FMWCONFIG_CLASSPATH - Classpath required to start config tools such as WLST, config wizard, pack, and unpack..
# FMWLAUNCH_CLASSPATH - Additional classpath needed for WLST start script
# LD_LIBRARY_PATH, LIBPATH and SHLIB_PATH
# - To locate native libraries.
# JAVA_VM - The java arg specifying the VM to run. (e.g.
# -server, -hotspot, etc.)
# MEM_ARGS - The variable to override the standard memory arguments
# passed to java.
# CLASSPATHSEP - CLASSPATH delimiter.
# PATHSEP - Path delimiter.
# DERBY_HOME - Derby home directory.
# DERBY_TOOLS - Derby tools jar.
# DERBY_CLASSPATH - Classpath needed to start Derby.
# DERBY_CLIENT_CLASSPATH
# - Derby client classpath.
# PRODUCTION_MODE - Indicates if the Server will be started in PRODUCTION_MODE
# PATCH_CLASSPATH - WebLogic system classpath patch
# PATCH_LIBPATH - Library path used for patches
# PATCH_PATH - Path used for patches
# WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
# It exports the following function:
# trapSIGINT - Get actual Derby PID when running in MKSNT environment;
# trap SIGINT to make sure Derby will also be stopped.
# resetFd - Reset the number of open file descriptors to 1024.
# jDriver for Oracle users: This script assumes that native libraries required
# for jDriver for Oracle have been installed in the proper location and that
# your os specific library path variable (i.e. LD_LIBRARY_PATH/solaris,
# SHLIB_PATH/hpux, etc...) has been set appropriately. Also note that this
# script defaults to the oci920_8 version of the shared libraries. If this is
# not the version you need, please adjust the library path variable
# accordingly.
# sub functions
# limit the number of open file descriptors
resetFd() {
if [ ! -n "`uname -s |grep -i cygwin || uname -s |grep -i windows_nt || \
uname -s |grep -i HP-UX`" ]
then
ofiles=`ulimit -S -n`
maxfiles=`ulimit -H -n`
if [ "$?" = "0" -a `expr ${maxfiles} : '[0-9][0-9]*$'` -eq 0 -a `expr ${ofiles} : '[0-9][0-9]*$'` -eq 0 ]; then
ulimit -n 4096
else
if [ "$?" = "0" -a `uname -s` = "SunOS" -a `expr ${maxfiles} : '[0-9][0-9]*$'` -eq 0 ]; then
if [ ${ofiles} -lt 65536 ]; then
ulimit -H -n 65536
else
ulimit -H -n ${ofiles}
fi
fi
fi
fi
# Get actual Derby process when running in MKS/NT environment;
# Trap SIGINT
# input:
# DERBY_PID -- Derby server process id.
# output:
# DERBY_PID -- Actual Derby pid in MKS/NT environment.
trapSIGINT() {
# With MKS, the pid of $! dosen't show up correctly.
# It starts a shell process to launch whatever commands it calls.
if [ `uname -s` = "Windows_NT" ]; then
DERBY_PID=`ps -eo pid,ppid |
awk -v DERBY_PID=${DERBY_PID} '$2 == DERBY_PID {print $1}'`
POINTBASE_PID=`ps -eo pid,ppid |
awk -v POINTBASE_PID=${POINTBASE_PID} '$2 == POINTBASE_PID {print $1}'`
fi
# Kill Derby on interrupt from this script (^C)
trap 'if [ "${DERBY_PID}" != "" ]; then
kill -9 ${DERBY_PID}
unset DERBY_PID
fi' 2
trap 'if [ "${POINTBASE_PID}" != "" ]; then
kill -9 ${POINTBASE_PID}
unset POINTBASE_PID
fi' 2
# end of sub functions
# Set up BEA Home
BEA_HOME="/bea/wls"
# Set up Middleware Home
MW_HOME="/bea/wls"
# Set up WebLogic Home
WL_HOME="/bea/wls/wlserver_10.3"
# Set up COHERENCE Home
COHERENCE_HOME="/bea/wls/coherence_3.6"
# Set up Common Modules Directory
MODULES_DIR="/bea/wls/modules"
# Set up Common Features Directory
FEATURES_DIR="/bea/wls/modules/features"
# Set up Ant Home
ANT_HOME="${MODULES_DIR}/org.apache.ant_1.7.1"
# Set up Ant contrib
ANT_CONTRIB="${MODULES_DIR}/net.sf.antcontrib_1.1.0.0_1-0b2"
# Setup SUN_ARCH_DATA_MODEL
SUN_ARCH_DATA_MODEL="32"
#JAVA_USE_64BIT, true if JVM uses 64 bit operations
JAVA_USE_64BIT=false
# Reset JAVA_HOME, JAVA_VENDOR and PRODUCTION_MODE unless JAVA_HOME
# and JAVA_VENDOR are pre-defined.
if [ -z "${JAVA_HOME}" -o -z "${JAVA_VENDOR}" ]; then
# Set up JAVA HOME
JAVA_HOME="/usr/jdk/instances/jdk1.7.0_05"
# Set up JAVA VENDOR, possible values are
#Oracle, HP, IBM, Sun ...
JAVA_VENDOR=Oracle
# PRODUCTION_MODE, default to the development mode
PRODUCTION_MODE=""
fi
export BEA_HOME MW_HOME WL_HOME MODULES_DIR FEATURES_DIR COHERENCE_HOME ANT_HOME ANT_CONTRIB JAVA_HOME JAVA_VENDOR PRODUCTION_MODE JAVA_USE_64BIT
# Set up JVM options base on value of JAVA_VENDOR
if [ "$PRODUCTION_MODE" = "true" ]; then
case $JAVA_VENDOR in
Oracle)
JAVA_VM=-server
MEM_ARGS="-Xms128m -Xmx256m"
HP)
JAVA_VM=-server
MEM_ARGS="-Xms32m -Xmx200m -XX:MaxPermSize=128m"
IBM)
JAVA_VM=
MEM_ARGS="-Xms32m -Xmx200m"
Sun)
JAVA_VM=-server
MEM_ARGS="-Xms32m -Xmx200m -XX:MaxPermSize=128m"
Apple)
JAVA_VM=-server
MEM_ARGS="-Xms32m -Xmx200m -XX:MaxPermSize=128m"
JAVA_VM=
MEM_ARGS="-Xms32m -Xmx200m"
esac
else
case $JAVA_VENDOR in
Oracle)
JAVA_VM=-server
MEM_ARGS="-Xms128m -Xmx256m"
-Xms512m -Xmx512m -XX:MaxPermSize=256m
JAVA_OPTIONS="${JAVA_OPTIONS} -Xverify:none"
HP)
JAVA_VM=-client
MEM_ARGS="-Xms32m -Xmx200m -XX:MaxPermSize=128m"
IBM)
JAVA_VM=
MEM_ARGS="-Xms32m -Xmx200m"
Sun)
JAVA_VM=-client
MEM_ARGS="-Xms32m -Xmx200m -XX:MaxPermSize=128m"
JAVA_OPTIONS="${JAVA_OPTIONS} -Xverify:none"
Apple)
JAVA_VM=-client
MEM_ARGS="-Xms32m -Xmx200m -XX:MaxPermSize=128m"
JAVA_VM=
MEM_ARGS="-Xms32m -Xmx200m"
esac
fi
export JAVA_VM MEM_ARGS JAVA_OPTIONS
# Set the classpath separator
case `uname -s` in
Windows_NT*)
CLASSPATHSEP=\;
PATHSEP=\;
CYGWIN*)
CLASSPATHSEP=\;
esac
if [ "${CLASSPATHSEP}" = "" ]; then
CLASSPATHSEP=:
fi
if [ "${PATHSEP}" = "" ]; then
PATHSEP=:
fi
export PATHSEP CLASSPATHSEP
# Set-up patch related class path, extension dirs, library path and path options
if [ -f "${WL_HOME}/common/bin/setPatchEnv.sh" ]; then
. "${WL_HOME}"/common/bin/setPatchEnv.sh
fi
# Figure out how to load java native libraries, also add -d64 for hpux and solaris 64 bit arch.
case `uname -s` in
AIX)
if [ -n "${LIBPATH}" ]; then
if [ "${SUN_ARCH_DATA_MODEL}" = "64" ]; then
LIBPATH=${LIBPATH}:${WL_HOME}/server/native/aix/ppc64
else
LIBPATH=${LIBPATH}:${WL_HOME}/server/native/aix/ppc
fi
else
if [ "${SUN_ARCH_DATA_MODEL}" = "64" ]; then
LIBPATH=${WL_HOME}/server/native/aix/ppc64
else
LIBPATH=${WL_HOME}/server/native/aix/ppc
fi
fi
LIBPATH=${PATCH_LIBPATH}:${LIBPATH}
export LIBPATH
HP-UX)
arch=`uname -m`
if [ "${arch}" = "ia64" ]; then
if [ -n "${SHLIB_PATH}" ]; then
if [ "${SUN_ARCH_DATA_MODEL}" = "64" ]; then
SHLIB_PATH=${SHLIB_PATH}:${WL_HOME}/server/native/hpux11/IPF64:${WL_HOME}/server/native/hpux11/IPF64/oci920_8
else
SHLIB_PATH=${SHLIB_PATH}:${WL_HOME}/server/native/hpux11/IPF32:${WL_HOME}/server/native/hpux11/IPF32/oci920_8
fi
else
if [ "${SUN_ARCH_DATA_MODEL}" = "64" ]; then
SHLIB_PATH=${WL_HOME}/server/native/hpux11/IPF64:${WL_HOME}/server/native/hpux11/IPF64/oci920_8
else
SHLIB_PATH=${WL_HOME}/server/native/hpux11/IPF32:${WL_HOME}/server/native/hpux11/IPF32/oci920_8
fi
fi
else
if [ -n "${SHLIB_PATH}" ]; then
if [ "${SUN_ARCH_DATA_MODEL}" = "64" ]; then
SHLIB_PATH=${SHLIB_PATH}:${WL_HOME}/server/native/hpux11/PA_RISC64:${WL_HOME}/server/native/hpux11/PA_RISC64/oci920_8
else
SHLIB_PATH=${SHLIB_PATH}:${WL_HOME}/server/native/hpux11/PA_RISC:${WL_HOME}/server/native/hpux11/PA_RISC/oci920_8
fi
else
if [ "${SUN_ARCH_DATA_MODEL}" = "64" ]; then
SHLIB_PATH=${WL_HOME}/server/native/hpux11/PA_RISC64:${WL_HOME}/server/native/hpux11/PA_RISC64/oci920_8
else
SHLIB_PATH=${WL_HOME}/server/native/hpux11/PA_RISC:${WL_HOME}/server/native/hpux11/PA_RISC/oci920_8
fi
fi
fi
SHLIB_PATH=${PATCH_LIBPATH}:${SHLIB_PATH}
export SHLIB_PATH
if [ "${JAVA_USE_64BIT}" = "true" ] && [ "${JAVA_VENDOR}" != "Oracle" ]
then
JVM_D64="-d64"
export JVM_D64
JAVA_VM="${JAVA_VM} ${JVM_D64}"
export JAVA_VM
fi
LINUX|Linux)
arch=`uname -m`
if [ -n "${LD_LIBRARY_PATH}" ]; then
if [ "${arch}" = "ia64" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WL_HOME}/server/native/linux/ia64:${WL_HOME}/server/native/linux/ia64/oci920_8
else
if [ "${arch}" = "x86_64" -a "${SUN_ARCH_DATA_MODEL}" = "64" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WL_HOME}/server/native/linux/${arch}:${WL_HOME}/server/native/linux/${arch}/oci920_8
if [ "$SIP_ENABLED" = "true" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WLSS_HOME}/server/native/linux/${arch}:${WLSS_HOME}/server/native/linux/${arch}/oci920_8
fi
else
if [ "${arch}" = "s390x" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WL_HOME}/server/native/linux/s390x
else
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WL_HOME}/server/native/linux/i686:${WL_HOME}/server/native/linux/i686/oci920_8
fi
if [ "$SIP_ENABLED" = "true" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WLSS_HOME}/server/native/linux/i686:${WLSS_HOME}/server/native/linux/i686/oci920_8
fi
fi
fi
else
if [ "${arch}" = "ia64" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WL_HOME}/server/native/linux/ia64:${WL_HOME}/server/native/linux/ia64/oci920_8
else
if [ "${arch}" = "x86_64" -a "${SUN_ARCH_DATA_MODEL}" = "64" ]; then
LD_LIBRARY_PATH=${WL_HOME}/server/native/linux/${arch}:${WL_HOME}/server/native/linux/${arch}/oci920_8
if [ "$SIP_ENABLED" = "true" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WLSS_HOME}/server/native/linux/${arch}:${WLSS_HOME}/server/native/linux/${arch}/oci920_8
fi
else
if [ "${arch}" = "s390x" ]; then
LD_LIBRARY_PATH=${WL_HOME}/server/native/linux/s390x
else
LD_LIBRARY_PATH=${WL_HOME}/server/native/linux/i686:${WL_HOME}/server/native/linux/i686/oci920_8
fi
if [ "$SIP_ENABLED" = "true" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WLSS_HOME}/server/native/linux/i686:${WLSS_HOME}/server/native/linux/i686/oci920_8
fi
fi
fi
fi
LD_LIBRARY_PATH=${PATCH_LIBPATH}:${LD_LIBRARY_PATH}
export LD_LIBRARY_PATH
OSF1)
if [ -n "${LD_LIBRARY_PATH}" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WL_HOME}/server/native/tru64unix
else
LD_LIBRARY_PATH=${WL_HOME}/server/native/tru64unix
fi
LD_LIBRARY_PATH=${PATCH_LIBPATH}:${LD_LIBRARY_PATH}
export LD_LIBRARY_PATH
SunOS)
arch=`uname -m`
if [ -n "${LD_LIBRARY_PATH}" ]; then
if [ "${arch}" = "i86pc" ]; then
if [ "${SUN_ARCH_DATA_MODEL}" = "64" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WL_HOME}/server/native/solaris/x64
else
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WL_HOME}/server/native/solaris/x86
fi
else
if [ "${SUN_ARCH_DATA_MODEL}" = "64" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WL_HOME}/server/native/solaris/sparc64:${WL_HOME}/server/native/solaris/sparc64/oci920_8
if [ "$SIP_ENABLED" = "true" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WLSS_HOME}/server/native/solaris/sparc64:${WLSS_HOME}/server/native/solaris/sparc64/oci920_8
fi
else
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WL_HOME}/server/native/solaris/sparc:${WL_HOME}/server/native/solaris/sparc/oci920_8
if [ "$SIP_ENABLED" = "true" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WLSS_HOME}/server/native/solaris/sparc:${WLSS_HOME}/server/native/solaris/sparc/oci920_8
fi
fi
fi
else
if [ "${arch}" = "i86pc" ]; then
if [ "${SUN_ARCH_DATA_MODEL}" = "64" ]; then
LD_LIBRARY_PATH=${WL_HOME}/server/native/solaris/x64
else
LD_LIBRARY_PATH=${WL_HOME}/server/native/solaris/x86
fi
else
if [ "${SUN_ARCH_DATA_MODEL}" = "64" ]; then
LD_LIBRARY_PATH=${WL_HOME}/server/native/solaris/sparc64:${WL_HOME}/server/native/solaris/sparc64/oci920_8
if [ "$SIP_ENABLED" = "true" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WLSS_HOME}/server/native/solaris/sparc64:${WLSS_HOME}/server/native/solaris/sparc64/oci920_8
fi
else
LD_LIBRARY_PATH=${WL_HOME}/server/native/solaris/sparc:${WL_HOME}/server/native/solaris/sparc/oci920_8
if [ "$SIP_ENABLED" = "true" ]; then
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${WLSS_HOME}/server/native/solaris/sparc:${WLSS_HOME}/server/native/solaris/sparc/oci920_8
fi
fi
fi
fi
LD_LIBRARY_PATH=${PATCH_LIBPATH}:${LD_LIBRARY_PATH}
export LD_LIBRARY_PATH
if [ "${JAVA_USE_64BIT}" = "true" ] && [ "${JAVA_VENDOR}" != "Oracle" ]
then
JVM_D64="-d64"
export JVM_D64
JAVA_VM="${JAVA_VM} ${JVM_D64}"
export JAVA_VM
fi
Darwin)
if [ -n "${DYLD_LIBRARY_PATH}" ]; then
DYLD_LIBRARY_PATH=${DYLD_LIBRARY_PATH}:${WL_HOME}/server/native/macosx
else
DYLD_LIBRARY_PATH=${WL_HOME}/server/native/macosx
fi
DYLD_LIBRARY_PATH=${PATCH_LIBPATH}:${DYLD_LIBRARY_PATH}
export DYLD_LIBRARY_PATH
Windows_NT*) ;;
CYGWIN*) ;;
echo "$0: Don't know how to set the shared library path for `uname -s`. "
esac
# set up WebLogic Server's class path
WEBLOGIC_CLASSPATH="${JAVA_HOME}/lib/tools.jar${CLASSPATHSEP}${WL_HOME}/server/lib/weblogic_sp.jar${CLASSPATHSEP}${WL_HOME}/server/lib/weblogic.jar${CLASSPATHSEP}${FEATURES_DIR}/weblogic.server.modules_10.3.4.0.jar${CLASSPATHSEP}${WL_HOME}/server/lib/webservices.jar${CLASSPATHSEP}${ANT_HOME}/lib/ant-all.jar${CLASSPATHSEP}${ANT_CONTRIB}/lib/ant-contrib.jar"
export WEBLOGIC_CLASSPATH
# set up config tools class path
FMWCONFIG_CLASSPATH="${JAVA_HOME}/lib/tools.jar${CLASSPATHSEP}${BEA_HOME}/utils/config/10.3/config-launch.jar${CLASSPATHSEP}${WL_HOME}/server/lib/weblogic_sp.jar${CLASSPATHSEP}${WL_HOME}/server/lib/weblogic.jar${CLASSPATHSEP}${FEATURES_DIR}/weblogic.server.modules_10.3.4.0.jar${CLASSPATHSEP}${WL_HOME}/server/lib/webservices.jar${CLASSPATHSEP}${ANT_HOME}/lib/ant-all.jar${CLASSPATHSEP}${ANT_CONTRIB}/lib/ant-contrib.jar"
export FMWCONFIG_CLASSPATH
FMWLAUNCH_CLASSPATH="${BEA_HOME}/utils/config/10.3/config-launch.jar"
export FMWLAUNCH_CLASSPATH
if [ "${PATCH_CLASSPATH}" != "" ] ; then
WEBLOGIC_CLASSPATH="${PATCH_CLASSPATH}${CLASSPATHSEP}${WEBLOGIC_CLASSPATH}"
export WEBLOGIC_CLASSPATH
FMWCONFIG_CLASSPATH="${PATCH_CLASSPATH}${CLASSPATHSEP}${FMWCONFIG_CLASSPATH}"
export FMWCONFIG_CLASSPATH
fi
if [ "$SIP_ENABLED" = "true" ]; then
# set up SIP classpath
SIP_CLASSPATH="${WLSS_HOME}/server/lib/weblogic_sip.jar"
# add to WLS class path
WEBLOGIC_CLASSPATH="${WEBLOGIC_CLASSPATH}${CLASSPATHSEP}${SIP_CLASSPATH}"
export WEBLOGIC_CLASSPATH
FMWCONFIG_CLASSPATH="${FMWCONFIG_CLASSPATH}${CLASSPATHSEP}${SIP_CLASSPATH}"
export FMWCONFIG_CLASSPATH
fi
# DERBY configuration
DERBY_HOME="${WL_HOME}/common/derby"
DERBY_CLIENT_CLASSPATH="${DERBY_HOME}/lib/derbyclient.jar"
DERBY_CLASSPATH="${CLASSPATHSEP}${DERBY_HOME}/lib/derbynet.jar${CLASSPATHSEP}${DERBY_CLIENT_CLASSPATH}"
DERBY_TOOLS="${DERBY_HOME}/lib/derbytools.jar"
DERBY_SYSTEM_HOME=${WL_HOME}/common/derby/demo/databases
DERBY_OPTS="-Dderby.system.home=$DERBY_SYSTEM_HOME"
if [ "${DERBY_PRE_CLASSPATH}" != "" ] ; then
DERBY_CLASSPATH="${DERBY_PRE_CLASSPATH}${CLASSPATHSEP}${DERBY_CLASSPATH}"
fi
if [ "${DERBY_POST_CLASSPATH}" != "" ] ; then
DERBY_CLASSPATH="${DERBY_CLASSPATH}${CLASSPATHSEP}${DERBY_POST_CLASSPATH}"
fi
export DERBY_HOME DERBY_CLASSPATH DERBY_TOOLS DERBY_SYSTEM_HOME DERBY_OPTS
if [ -d "${WL_HOME}/common/eval/pointbase" ]
then
# PointBase configuration
POINTBASE_HOME="${WL_HOME}/common/eval/pointbase"
POINTBASE_CLIENT_CLASSPATH="${POINTBASE_HOME}/lib/pbclient57.jar"
POINTBASE_CLASSPATH="${CLASSPATHSEP}${POINTBASE_HOME}/lib/pbembedded57.jar${CLASSPATHSEP}${POINTBASE_CLIENT_CLASSPATH}"
POINTBASE_TOOLS="${POINTBASE_HOME}/lib/pbtools57.jar"
if [ "${POINTBASE_PRE_CLASSPATH}" != "" ] ; then
POINTBASE_CLASSPATH="${POINTBASE_PRE_CLASSPATH}${CLASSPATHSEP}${POINTBASE_CLASSPATH}"
fi
if [ "${POINTBASE_POST_CLASSPATH}" != "" ] ; then
POINTBASE_CLASSPATH="${POINTBASE_CLASSPATH}${CLASSPATHSEP}${POINTBASE_POST_CLASSPATH}"
fi
export POINTBASE_HOME POINTBASE_CLASSPATH POINTBASE_TOOLS
fi
# Set up PATH
if [ `uname -s` = "CYGWIN32/NT" ]; then
# If we are on an old version of Cygnus we need to turn <letter>:/ in the path
# to //<letter>/
WL_HOME_CYGWIN=`echo $WL_HOME | sed 's#\([a-zA-Z]\):#//\1#g'`
ANT_HOME_CYGWIN=`echo $ANT_HOME | sed 's#\([a-zA-Z]\):#//\1#g'`
ANT_CONTRIB_CYGWIN=`echo $ANT_CONTRIB | sed 's#\([a-zA-Z]\):#//\1#g'`
JAVA_HOME_CYGWIN=`echo $JAVA_HOME | sed 's#\([a-zA-Z]\):#//\1#g'`
PATCH_PATH_CYGWIN=`echo $PATCH_PATH | sed 's#\([a-zA-Z]\):#//\1#g'`
WL_USE_X86DLL=
WL_USE_IA64DLL=
WL_USE_AMD64DLL=
if [ "${WL_USE_IA64DLL}" = "true" ]; then
PATH="${PATCH_PATH_CYGWIN}${PATHSEP}${WL_HOME_CYGWIN}/server/native/win/64${PATHSEP}${WL_HOME_CYGWIN}/server/bin${PATHSEP}${ANT_HOME_CYGWIN}/bin${PATHSEP}${JAVA_HOME_CYGWIN}/jre/bin${PATHSEP}${JAVA_HOME_CYGWIN}/bin${PATHSEP}${PATH}${PATHSEP}${WL_HOME_CYGWIN}/server/native/win/64/oci920_8"
fi
if [ "${WL_USE_X86DLL}" = "true" ]; then
PATH="${PATCH_PATH_CYGWIN}${PATHSEP}${WL_HOME_CYGWIN}/server/native/win/32${PATHSEP}${WL_HOME_CYGWIN}/server/bin${PATHSEP}${ANT_HOME_CYGWIN}/bin${PATHSEP}${JAVA_HOME_CYGWIN}/jre/bin${PATHSEP}${JAVA_HOME_CYGWIN}/bin${PATHSEP}${PATH}${PATHSEP}${WL_HOME_CYGWIN}/server/native/win/32/oci920_8"
fi
if [ "${WL_USE_AMD64DLL}" = "true" ]; then
PATH="${PATCH_PATH_CYGWIN}${PATHSEP}${WL_HOME_CYGWIN}/server/native/win/x64${PATHSEP}${WL_HOME_CYGWIN}/server/bin${PATHSEP}${ANT_HOME_CYGWIN}/bin${PATHSEP}${JAVA_HOME_CYGWIN}/jre/bin${PATHSEP}${JAVA_HOME_CYGWIN}/bin${PATHSEP}${PATH}${PATHSEP}${WL_HOME_CYGWIN}/server/native/win/x64/oci920_8"
fi
else
if [ -n "`uname -s |grep -i cygwin_`" ]; then
# If we are on an new version of Cygnus we need to turn <letter>:/ in
# the path to /cygdrive/<letter>/
CYGDRIVE=`mount -ps | tail -1 | awk '{print $1}' | sed -e 's%/$%%'`
WL_HOME_CYGWIN=`echo $WL_HOME | sed "s#\([a-zA-Z]\):#${CYGDRIVE}/\1#g"`
ANT_HOME_CYGWIN=`echo $ANT_HOME | sed "s#\([a-zA-Z]\):#${CYGDRIVE}/\1#g"`
PATCH_PATH_CYGWIN=`echo $PATCH_PATH | sed "s#\([a-zA-Z]\):#${CYGDRIVE}/\1#g"`
JAVA_HOME_CYGWIN=`echo $JAVA_HOME | sed "s#\([a-zA-Z]\):#${CYGDRIVE}/\1#g"`
WL_USE_X86DLL=
WL_USE_IA64DLL=
WL_USE_AMD64DLL=
if [ "${WL_USE_IA64DLL}" = "true" ]; then
PATH="${PATCH_PATH_CYGWIN}${PATHSEP}${WL_HOME_CYGWIN}/server/native/win/64${PATHSEP}${WL_HOME_CYGWIN}/server/bin${PATHSEP}${ANT_HOME_CYGWIN}/bin${PATHSEP}${JAVA_HOME_CYGWIN}/jre/bin${PATHSEP}${JAVA_HOME_CYGWIN}/bin${PATHSEP}${PATH}${PATHSEP}${WL_HOME_CYGWIN}/server/native/win/64/oci920_8"
fi
if [ "${WL_USE_X86DLL}" = "true" ]; then
PATH="${PATCH_PATH_CYGWIN}${PATHSEP}${WL_HOME_CYGWIN}/server/native/win/32${PATHSEP}${WL_HOME_CYGWIN}/server/bin${PATHSEP}${ANT_HOME_CYGWIN}/bin${PATHSEP}${JAVA_HOME_CYGWIN}/jre/bin${PATHSEP}${JAVA_HOME_CYGWIN}/bin${PATHSEP}${PATH}${PATHSEP}${WL_HOME_CYGWIN}/server/native/win/32/oci920_8"
fi
if [ "${WL_USE_AMD64DLL}" = "true" ]; then
PATH="${PATCH_PATH_CYGWIN}${PATHSEP}${WL_HOME_CYGWIN}/server/native/win/x64${PATHSEP}${WL_HOME_CYGWIN}/server/bin${PATHSEP}${ANT_HOME_CYGWIN}/bin${PATHSEP}${JAVA_HOME_CYGWIN}/jre/bin${PATHSEP}${JAVA_HOME_CYGWIN}/bin${PATHSEP}${PATH}${PATHSEP}${WL_HOME_CYGWIN}/server/native/win/x64/oci920_8"
fi
else
# set PATH for other shell environments
PATH="${WL_HOME}/server/bin${PATHSEP}${ANT_HOME}/bin${PATHSEP}${JAVA_HOME}/jre/bin${PATHSEP}${JAVA_HOME}/bin${PATHSEP}${PATH}"
# On Windows, include WebLogic jDriver in PATH
if [ -n "`uname -s |grep -i windows_nt`" ]; then
WL_USE_X86DLL=
WL_USE_IA64DLL=
WL_USE_AMD64DLL=
if [ "${WL_USE_IA64DLL}" = "true" ]; then
PATH="${PATCH_PATH}${PATHSEP}${WL_HOME}/server/native/win/64${PATHSEP}${PATH}${PATHSEP}${WL_HOME}/server/native/win/64/oci920_8"
fi
if [ "${WL_USE_AMD64DLL}" = "true" ]; then
PATH="${PATCH_PATH}${PATHSEP}${WL_HOME}/server/native/win/x64${PATHSEP}${PATH}${PATHSEP}${WL_HOME}/server/native/win/x64/oci920_8"
fi
if [ "${WL_USE_X86DLL}" = "true" ]; then
PATH="${PATCH_PATH}${PATHSEP}${WL_HOME}/server/native/win/32${PATHSEP}${PATH}${PATHSEP}${WL_HOME}/server/native/win/32/oci920_8"
fi
fi
fi
fi
export PATH
resetFd
=======
my system is not on production mode and using oracle java. please suggest -
Cannot start Managed Server- after creating a new domain
I created a new domain, I could start Admin Server but ,I am unable to start Managed Server.
My DB is up & running
at com.collaxa.cube.engine.CubeEngine.finalizeActivity(CubeEngine.java:2842)
at com.collaxa.cube.engine.CubeEngine.checkBlockConditions(CubeEngine.java:3557)
at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2490)
at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1133)
at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:219)
at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:327)
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4350)
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4282)
at com.collaxa.cube.engine.CubeEngine._createAndInvoke(CubeEngine.java:713)
at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:545)
at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:654)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:355)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:88)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.wls.JpsWeblogicEjbInterceptor.runJaasMode(JpsWeblogicEjbInterceptor.java:61)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:106)
at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:106)
at sun.reflect.GeneratedMethodAccessor840.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy245.handleInvoke(Unknown Source)
at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.handleInvoke(BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.java:396)
at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:35)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:141)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:82)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:909)
at java.lang.Thread.run(Thread.java:619)
Caused By: com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'ReadInputDataSelect' failed due to: JCA Binding Component connection issue.
JCA Binding Component is unable to create an outbound JCA (CCI) connection.
DemoDBAdapter:ReadInputData [ ReadInputData_ptt::ReadInputDataSelect(ReadInputDataSelect_inputParameters,CustomerCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510
JCA Resource Adapter location error.
Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/>
The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DemoConnection'.
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or
2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DemoConnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR).
Please correct this and then restart the Application ServerDear Anuj,
I created a connection pool in DB adapter with JNDI name "eis/DB/DemoConnection"? and then updated
BUT WHEN I SEE DB ADAPTER in deployments, the sate is New . It should be ACTIVE . right?
Again when I start Managed Server,although my soa_server is up and running, I get this error
However, I did not create any JMS for this domain.
<Aug 9, 2010 11:21:45 AM CDT> <Warning> <oracle.soa.adapter> <BEA-000000> <JMSAdapter HelloWorld JMSMessageConsumer_init: Retrying connection; attempt #5>
<Aug 9, 2010 11:21:45 AM CDT> <Warning> <oracle.soa.adapter> <BEA-000000> <JMSAdapter HelloWorld
BINDING.JCA-12135
ERRJMS_ERR_CR_QUEUE_CONS.
ERRJMS_ERR_CR_QUEUE_CONS.
Unable to create Queue consumer due to JMSException.
Please examine the log file to determine the problem.
at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:620)
at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:497)
at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.createConsumer(JMSMessageConsumer.java:342)
at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.init(JMSMessageConsumer.java:913)
at oracle.tip.adapter.jms.inbound.JmsConsumer.init(JmsConsumer.java:862)
at oracle.tip.adapter.jms.JmsEndpoint.run(JmsEndpoint.java:163)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: weblogic.jms.common.JMSException: [JMSExceptions:045103]While trying to find a topic or a queue we could not find the specific JMSServer requested. The linked exception may contain more information about the reason for failure.
at weblogic.jms.dispatcher.DispatcherAdapter.convertToJMSExceptionAndThrow(DispatcherAdapter.java:110)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSyncNoTran(DispatcherAdapter.java:61)
at weblogic.jms.client.JMSSession.createDestination(JMSSession.java:3192)
at weblogic.jms.client.JMSSession.createQueue(JMSSession.java:2577)
at oracle.tip.adapter.jms.JMS.JMSDestination.getQueue(JMSDestination.java:83)
at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:605)
... 8 more
Caused by: weblogic.jms.common.JMSException: [JMSExceptions:045103]While trying to find a topic or a queue we could not find the specific JMSServer requested. The linked exception may contain more information about the reason for failure.
at weblogic.jms.dispatcher.Request.handleThrowable(Request.java:87)
at weblogic.jms.dispatcher.Request.getResult(Request.java:52)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:1124)
at weblogic.messaging.dispatcher.DispatcherImpl.syncRequest(DispatcherImpl.java:184)
at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSyncNoTran(DispatcherImpl.java:287)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSyncNoTran(DispatcherAdapter.java:59)
... 12 more
Caused by: weblogic.jms.common.JMSException: [JMSExceptions:045103]While trying to find a topic or a queue we could not find the specific JMSServer requested. The linked exception may contain more information about the reason for failure.
at weblogic.jms.frontend.FEManager.destinationCreate(FEManager.java:289)
at weblogic.jms.frontend.FEManager.invoke(FEManager.java:548)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:961)
at weblogic.messaging.dispatcher.DispatcherImpl.syncRequest(DispatcherImpl.java:184)
at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSyncNoTran(DispatcherImpl.java:287)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSyncNoTran(DispatcherAdapter.java:59)
at weblogic.jms.client.JMSSession.createDestination(JMSSession.java:3192)
at weblogic.jms.client.JMSSession.createQueue(JMSSession.java:2577)
at oracle.tip.adapter.jms.JMS.JMSDestination.getQueue(JMSDestination.java:83)
at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:605)
at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:497)
at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.createConsumer(JMSMessageConsumer.java:342)
at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.init(JMSMessageConsumer.java:914)
at oracle.tip.adapter.jms.inbound.JmsConsumer.init(JmsConsumer.java:864)
at oracle.tip.adapter.jms.JmsEndpoint.run(JmsEndpoint.java:163)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:106)
... 2 more
Caused by: javax.naming.NameNotFoundException: Unable to resolve 'weblogic.jms.backend.jms'. Resolved 'weblogic.jms.backend'; remaining name 'jms'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
at weblogic.jms.frontend.FEManager.destinationCreate(FEManager.java:287)
at weblogic.jms.frontend.FEManager.invoke(FEManager.java:548)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:961)
at weblogic.messaging.dispatcher.DispatcherImpl.syncRequest(DispatcherImpl.java:184)
at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSyncNoTran(DispatcherImpl.java:287)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSyncNoTran(DispatcherAdapter.java:59)
at weblogic.jms.client.JMSSession.createDestination(JMSSession.java:3192)
at weblogic.jms.client.JMSSession.createQueue(JMSSession.java:2577)
at oracle.tip.adapter.jms.JMS.JMSDestination.getQueue(JMSDestination.java:83)
at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:605)
at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:497)
at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.createConsumer(JMSMessageConsumer.java:342)
at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.init(JMSMessageConsumer.java:913)
at oracle.tip.adapter.jms.inbound.JmsConsumer.init(JmsConsumer.java:862)
at oracle.tip.adapter.jms.JmsEndpoint.run(JmsEndpoint.java:163)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
... 2 more
>
<Aug 9, 2010 11:21:46 AM CDT> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
<Aug 9, 2010 11:21:46 AM CDT> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
<Aug 9, 2010 11:21:47 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SUSPENDING>
<Aug 9, 2010 11:21:47 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Aug 9, 2010 11:21:47 AM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<Aug 9, 2010 11:21:47 AM CDT> <Notice> <Server> <BEA-002607> <Channel "Default" listening on 192.168.128.102:8001 was shutdown.>
<Aug 9, 2010 11:21:47 AM CDT> <Notice> <Server> <BEA-002607> <Channel "Default[2]" listening on 127.0.0.1:8001 was shutdown.>
<Aug 9, 2010 11:21:47 AM CDT> <Notice> <Server> <BEA-002607> <Channel "Default[3]" listening on 0:0:0:0:0:0:0:1:8001 was shutdown.>
<Aug 9, 2010 11:21:47 AM CDT> <Notice> <Server> <BEA-002607> <Channel "Default[1]" listening on fe80:0:0:0:20c:29ff:fe81:998f:8001 was shutdown.>
INFO: JMSAdapter JmsResourceAdapter_endpointDeactivation: Deactivating endpoint Endpoint_1
[TopLink Info]: 2010.08.09 11:21:53.232--ServerSession(382132253)--deferred_session logout successful
[TopLink Info]: 2010.08.09 11:21:53.232--ServerSession(381072707)--tracking_session logout successful
<Aug 9, 2010 11:21:54 AM CDT> <Notice> <LoggingService> <BEA-320400> <The log file /u01/app/oracle/product/Middleware/user_projects/domains/base_domain4/servers/soa_server1/logs/soa_server1.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 9, 2010 11:21:54 AM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /u01/app/oracle/product/Middleware/user_projects/domains/base_domain4/servers/soa_server1/logs/soa_server1.log00021. Log messages will continue to be logged in /u01/app/oracle/product/Middleware/user_projects/domains/base_domain4/servers/soa_server1/logs/soa_server1.log.>
[oracle@OracleTest1 bin]$ -
How to start Managed server in Weblogic 8.1
Hi,
I am Using Weblogic 8.1 server. I can able to start weblogic server by invkoing startWebLogic.sh. When I start managed server by invoking the shell startManagedWebLogic.sh it error out by following exception
<BEA-000364> <Server failed during initialization. Exception:weblogic.security.spi.ProviderInitializationException: [Security:090314]Entitlement Engine unable to connect to the embedded LDAP server
netscape.ldap.LDAPException: error result (49)
weblogic.security.spi.ProviderInitializationException: [Security:090314]Entitlement Engine unable to connect to the embedded LDAP server
netscape.ldap.LDAPException: error result (49)
at weblogic.security.providers.authorization.DefaultAuthorizationUtils.getEngine(DefaultAuthorizationUtils.java:130)
at weblogic.security.providers.authorization.DefaultRoleMapperProviderImpl.initialize(DefaultRoleMapperProviderImpl.java:104)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.createSecurityProvider(SecurityServiceManagerDelegateImpl.java:242)
at weblogic.security.service.SecurityServiceManager.createSecurityProvider(SecurityServiceManager.java:957)
at weblogic.security.service.RoleManager.initialize(RoleManager.java:152)
at weblogic.security.service.RoleManager.<init>(RoleManager.java:98)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doRole(SecurityServiceManagerDelegateImpl.java:513)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:409)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(SecurityServiceManagerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:734)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:822)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:344)
at weblogic.Server.main(Server.java:32)
I refered some forum, they ask to update <EmbeddedLDAP > tag by setting Credential="" in config.xml file. Still I get the same exception.
I have also tried in console, that too fails.
Help me out to resolve this.
thanks,
Thiru.Hi,
Thanks for your reply.
My Admin server is running fine. The msi-config.xml, SerializedSystemIni.dat, boot.properties files are in the same directory. When I exceute the command
startManagedWebLogic.sh <managed server name> it shows the same exception
<WebLogicServer> <BEA-000364> <Server failed during initialization. Exception:weblogic.security.spi.ProviderInitializationException: [Security:090314]Entitlement Engine unable to connect to the embedded LDAP server
netscape.ldap.LDAPException: error result (49)
weblogic.security.spi.ProviderInitializationException: [Security:090314]Entitlement Engine unable to connect to the embedded LDAP server
netscape.ldap.LDAPException: error result (49)
thanks,
Thiru.
Maybe you are looking for
-
IPod nano does NOT appear on Desktop or iTunes
My mac gave me a message saying Itunes, and quicktime need to updated. I did so and my mac restarted. Afterwards my iPod Nano no longer appears on my desktop or in iTunes. (Actually my nano only appears when iTunes is closed. When I remove my iPod Na
-
Aging - 7 Buckets - By Account Report
Hi All, I need sql script to get the same output of Oracle Standard Report 'Aging - 7 Buckets - By Account Report' as i am gone through the data model but the query is written in Dynamically and using Dual table. Can anyone tell me how to write the s
-
Slow performance in web when modal property set to yes for a popup canvas
Hi , I found that when the form is upgraded from 6i to 10g, it shown a significant delay to exit a popup canvas if the property Modal is set to Yes but if set to No, the performance is similar in both c/s and web. However, our application need to set
-
RH8 - HTML Design view is not displaying what the HTML specifies.
I recently edited a template (Master page) that includes tables. Now the design view of the master page does not correctly display the HTML for that page and the design view of each page that uses that Master Page displays blank tables. The HTML view
-
I am going crazy here! What do I do?
I have installed iTunes many times and every time I tried to run the program, I get a window that reads... "the folder "iTunes" cannot be found or created and is required. The default location is inside the "My Music" folder" I have even gone as far