Start Menu Not Auto Updating After Installation of New Applications

// Also reported via Windows Feedback Tool //
After the installation of several applications, the new Start Menu does not necessarily automatically update to reflect the added programs. 
The application’s folder is properly installed under C:\ProgramData\Microsoft\Windows\Start Menu\Programs, but it will not show under the Start Menu until the user logs out and logs in.
Interestingly enough, this behavior is not consistent.  Some applications installations are immediately reflected while others are not.
In this particular example, LibreOffice 4.3 was installed.

Hi @Senttu 
Thank you for your reply.
You can try running the file checker to look for and try to repair corrupted files.
Go to the command prompt.
Right click and run as administrator.
Type sfc /scannow and press enter.
You can also try  using the Windows troubleshooter.  Diagnose and repair Windows File and Folder Problems automatically.
If the issue should still remain, I suggest contacting  MIcrosoft for assistance.
Microsoft Corporation Customer Service 1 800 642 7676 or Microsoft Contac Us website.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • Start Menu not showing up after 8.1 Update

    I am a MSDN subscriber and after applying the Windows 8.1 Update (release April 2nd to MSDN) the Start Menu is not showing up as described in the Key Note.
    Is anyone else having this issue?  Its as if the updates were never applied.
    Thanks

    Hi,
    Would you please help to provide more detailed description of your concern?
    I suppose that once the computer restart, the desktop show up instead of Start screen by default.
    One settings can change this behavior which is newly added in Windows 8.1 update 1: Show store app in taskbar
    Kate Li
    TechNet Community Support

  • My iPhone 6 will not auto rotate after installation of version 8.0.2. The auto rotate lock is off in settings and in the Kindle app, but nothing will go to landscape.

    Since the installation of 8.0.2 my iPhone 6 will not auto rotate in any app. I have locked/unlocked the feature in settings several times using the command bar but to no avail. I read using the Kindle app and it also is locked in portrait whether the lock is on or off.

    Edselbe wrote:
    Your auto lock got turned on. Swipe up on the screen and tap the upper right icon. This will allow it to work again!
    Actually, the OP tried that (six months ago) and it didn't work. They resolved the issue (six months ago) by updating their system software (six months ago).

  • Build 10061 - Start Menu not opening programs other than Modern UI applications

    When I attempt to open a program via the start menu absolutely nothing happens, unless I am attempting to open a Modern UI app.  I've tried deleting the shortcut and "re-pinning" it to the start menu and it still does not work.  Any
    ideas?

    Assuming you are using build 10061.
    Will it work if you right click at the program shortcut > select Run As Admin ?
    excerpt from Insider Hub:
    Here are some known issues for this build
    We know this one will be a bit painful but there is a bug with this build in which Win32 (desktop) apps won’t launch from the Start menu. The workaround is to use search to find and launch these apps and pin them to your taskbar for quick access.

  • Hi everybody, adobe muse does not start at the first attempt after installation. know the reason and possible solution? (on iMac 27 retina - latest edition)

    Hi everybody, adobe muse does not start at the first attempt after installation. know the reason and possible solution? (on iMac 27 retina - latest edition)

    Hi
    Are you still experiencing the issue or is it fixed now?

  • On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

    How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

    The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
    Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.
    If it's not an extension or plug-in issue, delete the cache.
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.

  • Windows xp will not boot up after installation of desktop software 4.3.

    windows xp will not boot up after installation of desktop software 4.3.  Where do I start to get my p.c. going again ???

    I get the message that a recent hardware or software change might have caused this.
    The computer does not boot up in safe mode or last known good configuration.
    I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer.

  • How do I set the default in Firefox to NOT auto update?

    I am being asked to create an installer for Firefox that sets the default to NOT auto update. We have Standard users who cannot load software, so do not want them to be prompted. WE want to control when programs get updated, so need to set the default in Firefox to not prompt to update anything. How do I do this? What file can I change?

    I've tried that, and then created my installer, but it defaults back to having auto update checked, or in the ON position. I want it to default to being OFF so any new installs or upgrades that I send out do not turn it back on.
    We manage all computers here, and do not want users doing any updates.

  • Plug-Ins not auto-updating, but auto update is set.

    I wanted to warn others about this problem.
    I read an earlier answer where someone said that Plug-Ins won't auto-update, perhaps that is correct, but if Plug-Ins don't auto-update, why is there an auto-update feature?
    (Tools-AddOns-Updated Automatically & Check for Updates both don't catch that plug-ins are out of date).
    I'm not talking about random obscure programs, this is the Java Platform & Toolkit. Shouldn't the Add-Ons options clearly state that they don't automatically update or check for updates?
    Fortunately I have decent anti-virus software, but I didn't discover this until I picked up a Trojan and started reviewing every single program on my computer to see if I had missed any updates.

    Thanks, I just wanted to warn others if they got confused, the way the options are set up it is a little confusing for us who aren't familiar with the difference between Addons & Plugins, it looks like you are choosing an Auto-Update for the Plugins too.
    I also figured out that the Java program is not auto-updating even though I set the auto-update feature on the program itself (which has nothing to do with any Firefox issues), so I will have to remember to check their support and also manually check the program pretty often.

  • My phone is not auto lock after 1min as specified

    my iphone 4 is not auto lock after 1 minute as i specified in the settings. operating sytem is iOS6

    to see the camera icon, double click the home button when you are on the lock screen. this will show the music controls and the camera icon. double-click again to close them.

  • Has anyone's screen go blank and not boot up after installing the new yosemite OS

    has anyone's screen go blank and not boot up after installing the new yosemite OS

    Hi Mofimac,
    Thanks for visiting Apple Support Communities.
    If your Mac is only starting up to a blank gray or white screen after updating OS X, you can find some useful troubleshooting steps in this article:
    Mac OS X: Gray screen appears during startup
    I recommend going through these first three sections first:
    Disconnect, test peripheral devices and network cables
    Perform a Safe Boot
    Reset the NVRAM / PRAM
    Best Regards,
    Jeremy

  • How to Enable Auto Update functionality in  adobe AIR application?

    Hi All,
         How to Enable Auto Update functionality in  adobe AIR application and ask for new version to install to user.
         Please provide some informarion regarding above topic.
    Thanks,
    Sunil Rana

    Hi All,,
    Got solution. call checkUpdate() function in application level initialize event.
    private function checkUpdate() : void
                    appUpdater.updateURL = "http://www.aa.com/flex/aa/NativeUpdater.xml";
                    appUpdater.addEventListener(UpdateEvent.INITIALIZED, updater_initializedHandler);
                    //we can hide the dialog asking for permission for checking for a new update;
                    //if you want to see it just leave the default value (or set true).
                    appUpdater.isCheckForUpdateVisible = false;               
                    //we initialize the updater
                    appUpdater.initialize();   
                 * Handler function for updater_initializedHandler events triggered by the ApplicationUpdater.INITIALIZED
                 * @param updater_initializedHandler
                protected function updater_initializedHandler(event:UpdateEvent):void
                    //initializeHandler();
                    appUpdater.checkNow();
    In NativeUpdater.xml
    <?xml version="1.0" encoding="utf-8" ?>
    <update xmlns="http://ns.adobe.com/air/framework/update/description/1.0">
         <version>2.0</version>
          <url>http://www.aa.com/flex/aa/AutoUpdate.air</url>
         <description>
         <![CDATA[                 * This a Win update
          ]]>
          </description>
    </update>
    Upload NativeUpdater.xml file on your Server. When you open your old .air file it will ask for replace with new version.
    Thanks,
    Sunil Rana

  • Help! Help! Help! Can not reinstal vista after replacing a new hard drive

    Can not reinstal vista after replacing a new hard drive (1TB WD 10EZEX) in HP Pavilion a6658f Desktop PC with recovery disc.
    I saw in the screen:
    "Windows setup could not configure windows to run on this computer's hardware"
    Product:
    HP Pavilion a6658f Desktop PC
    OS: pre-installed window vista with sp1 
    Product number:   FK575AA
    Bought in Canada
    Thank you.

    Thank you so much Lisa27,
    win vista installed to new WD 1tb hard drive. How?
    1. use  http://support.wd.com/product/download.asp?groupid=606&lang=en
    >Data Lifeguard for Windows  , write zero and to test the new hard drive,
    2. use Acronics true image 2013 to do partition on the new HD, and then to clone from the old HD to new HD.
    3. down load Intel Rapid Storage Tech to fix the Issues with Windows Vista* and Intel® RAID  (without it, Window mail can not be opened.
    Thank you very much for all your guys again and the support form WD support team.

  • HT201210 Lost YouTube after installation of new software for both iPad and iTune. How to reinstall?

    Lost YouTube after installation of new software for both iPad and iTune. How to reinstall?

    Try this free YouTube app for iPad:
    http://itunes.apple.com/be/app/jasmine-youtube-client/id554937050?mt=8

  • After updating with Security Update 2010-001, Quicken will not auto update.  Auto update function in Preferences are also inop.  Numerous posts in Macbook discussions about similar problems with other apps.

    Installed Security Update 2012-001.  Now Quicken will not auto save and the auto save function in Preferences cannot be changed. There are numerous similar comments in the Macbook discussions about other apps.   Come on, Apple, we need some help out here!

    Howdy,
    Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
    I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
    You might wish to read:
    http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
    If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
    Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
    Time Machine restore: http://support.apple.com/kb/ht1427
    If you are restoring a backup made by a Mac to the same Mac
    With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
    If you can't easily restore from a backup, you can instead do the following:
    - You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
    - Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
    - Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
    - Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
    Links for 10.6.8 Update Combo v1.1:
    http://support.apple.com/kb/DL1399
    or the link to directly download this 1.09GB combo updater:
    http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
    Cheers,
    Daniel Feldman
    =======================
      MacMind
      Certified Member of the
      Apple Consultants Network
      Apple Certified (ACHDS)
      E-mail:  [email protected] 
      Phone:   1-408-454-6649
      URL : www.MacMind.com
    =======================

Maybe you are looking for