Start of integration builder takes several minutes

I have a similar problem as described in this topic.
Re: Visual Administrator Tool does not load 100%
When I start the integration builder it takes only a few moments until the logon dialog displays. But after entering the logon information it takes at least 5 minutes to load. And opening the first development object (interface, mapping etc.) takes also a few minutes.
I have this problem since updating my XI test system. Integration Builder of my XI prod system works fine.
XI Test:
XI Version: 3.0 SP 15
J2EE Version: 6.40 PatchLevel 100627.313
XI Prod:
XI Version: 3.0 SP 13
J2EE Version: 6.40 PatchLevel 88028.313
I have set the value MaxThreadCount to 150 as suggested in the thread mentioned. This has no effect on my problem. Of course the J2EE server was restarted.
I have no idea how I ca fix that problem.

> Hello Gil,
>
> OK, I've two things to mention:
>
> P4 protocol and bindHost. There were some problems
> reg. that, please refer to SAP Note: 883943. The
> bindHost value should be 0.0.0.0, especially, if the
> host has multiple network cards.
We have sp15 on our XIT and the problem with bindHost should be fixed. O course we have checked that. BindHost is set to 0.0.0.0 .
> JDK 1.4.2_10 is not recommended by SAP. Please refer
> to SAP Note: 716604. This JDK caused some problems
> during installation; the problems were related to
> database access.
>
We use java 1.4.2_10 on both systems, XIT and XIP. We had no problems during the installation. We had a going live check on our XIP 3 weeks ago. Java version was checked as ok.

Similar Messages

Reboot hangs and takes several minutes to reboot

Hello fellow archers I have a Vaio laptop and my system started to hang and takes several minutes to reboot.
I have no real clue as to why since poweroff works fine and reboot used to work fine.
I did a system update. And more recently migrated to systemd, may not be related
edit: I found a workaround. Adding the following to my grub kernel line
reboot=pci
But it does not reboot quite the same way, meaning the power led no longer goes off and back on.
Still haven't quite figured out why I can no longer reboot normally without this workaround.
Last edited by snoxu (2012-10-18 18:16:18)

I am also having this problem. When trying to reboot, I get an endless cycle of the BIOS screen, then "MACHINE ERROR", then back. Running the same dmesg command as snoxu results in a similar error message. I am forced to shutdown by holding the power button. Upon rebooting, I get an error message that all extensions have been turned off (using Gnome Shell). Then I have to logout and login.
Shutting down and then restarting works fine.
Additional info:
System76 Gazelle Professional laptop
syslinux, systemd, GDM, Gnome Shell

Javascript (in Firefox 3) takes several minutes to start working when computer wakes from sleep, Mac OSX 10.5.8

Whenever I wake my Mac from sleep, with Firefox having been left running, some parts of Firefox take several minutes to start working again. These include switching between open tabs and any website functionality that uses javascript, eg gmail. This has gone on through many updates of Firefox. If I quit Firefox immediately on waking the Mac and restart it, everything is OK.

The following worked for me:
http://support.mozilla.com/en-US/questions/684867
"Problem: I had the same problem but with mac osx 10.5.8, Firefox 3.6.6 sometimes prints and sometimes does not, but the preview was always blank and I could not save to pdf file.
Solution: I downloaded Firefox 3.5.10, installed it on my desktop and opened it, tried print preview and it worked, quit Firefox 3.5.10 and ran 3.6.6 and voila! print preview is working fine and I can save to pdf fine.
I guess running 3.5.10 fixes the profile in a certain way. I have no idea how that happened but it worked."

OSX 10.9.5 start up takes several minutes to connect to internet

My mac mini has now got a faster boot up time since having a SSD installed. However, I have noticed it takes several minutes for it to connect to the internet. Under Login Items, I use to have my NAS setup to connect a drive on start up. But, I always received the error "There was a problem connecting to server." I removed it.
What I have tried so far:
Upgraded from 10.8.5 to 10.9.5, that didn't change anything.
I have a Airport Extreme router (7.6.4) and even swapped it out for a Linksys router to see if that was the issue. That didn't matter.
All new ethernet cables for the router and mac mini.
Firewall turned off on OSX. I have since turned it back on since that didn't change anything. I do have Little Snitch running too.
Any other suggestions would be greatly appreciated.

Welcome to the Apple discussions.
When you say your machine is near capacity ... you want to keep at least 10% of your hard drive empty for systems usage. Less than that and the system slows way down.
One thing you can do is to use this tool to see what your largest files are on your system - move data to an external hard drive and delete, or just delete unused/un-needed data: http://software.filefactory.com/Mac/WhatSize_10-3-91.html
You might also run MacJanitor to run the daily/weekly/monthly scripts, which sometimes don't run automatically: http://personalpages.tds.net/~brian_hill/macjanitor.html. Some have found using a utility like OnyX can help with disk space. OnyX is available from http://www.titanium.free.fr/pgs2/english/download.html . Note OnyX does the same thing MacJanitor does, plus much more.
You can use Monolingual to delete the languages you know you'll never use from the operating system - depending on choices it can save over 1GB. Choose language options carefully, as you can muck things up if you rush through it: http://monolingual.sourceforge.net/
This FAQ is good reading on maximizing disk space: http://www.thexlab.com/faqs/freeingspace.html

Yaourt takes several minutes before start downloading

Hello everyone, I'm having a problem when I want to deal with any package in AUR repo using yaurt. It takes several minutes before start downloading.
For example:
$:> time yaourt -Ssa package-query
aur/package-query 1.1-2 [installed] (1656)
Query ALPM and AUR
aur/package-query-git 20120121-1 (198)
Query ALPM and AUR
real 1m5.524s
user 0m0.287s
sys 0m0.053s
Any suggestion???
Thanks in advance!!
*sory for my englsh, I'm from Argentina. ;D
Last edited by emab73 (2012-11-20 16:14:55)

I know it doesn't answer your specific question but you could experiment with another AUR helper. Or just use makepkg.

MBP takes several minutes to start... then very slow... HELP!

This is a duplicate of a post I have in the MBP forums, but was suggested to me that I may want to post it here as well.....
My MBP is coming up on 3 years old this December... Since upgrading to Leopard in early summer this year the system seems rather slow... especially starting up. It takes 3+ minutes usually. I didn't do a "clean", reformatted install with the OS install (which I may do once I back up my entire drive). I'm using approx. 70 gigs on my internal HD and the system states nearly 35 gigs availible... I have run Tech Tools Deluxe and Maintenance and they verify all is fine. I ran "sudo dmesg" in Terminal, and this is the report:
ing a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 4882.693 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 4883.673 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 4991.670 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 4992.473 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 5101.671 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 5102.553 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 5212.949 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 5213.913 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 5325.508 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 5326.553 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 5439.350 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 5440.218 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 5554.213 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 5555.161 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 5670.358 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 5671.385 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 5787.782 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 5788.633 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 5906.229 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 5907.161 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 6025.958 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 6026.970 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 6146.967 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 6147.801 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 6268.999 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 6269.913 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 6392.310 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
USBF: 6393.305 0x51f7f00 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd300000)
USBF: 6436.101 AppleUSBHubPort0x51f7f00::FatalError - Port 4 of Hub at 0xfd300000 reported error 0xe00002c0 while doing clearing port power feature
USBF: 6436.101 0x51f7f00 The IOUSBFamily was not able to enumerate a device.
disk0s2: ioctl('',51,0) is unsupported.
AirPort: Link Down on en1
disk0s2: ioctl('',51,0) is unsupported.
disk0s2: ioctl('',51,0) is unsupported.
disk0s2: ioctl('',51,0) is unsupported.
Here are my specs:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro2,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP22.00A5.B07
SMC Version (system): 1.12f5
Serial Number (system): W8***PW0H
Hardware UUID: 00000000-0000-1000-8000-0017F2C55613
Sudden Motion Sensor:
State: Enabled
I'd like to clean up my MBP and get rid of anything that is not needed or that may be slowing the machine down.... trying to get it to run faster, like when it was new.....
...what am I missing? What else should I do? Should I just do the reformat install of the OS once I back up to Time Machine?
I should add that although I usually have a few devices connected to my USB/ Firewire ports, for the above test, I made sure nothing was attached to my MBP.
Thanx,
Tony

I'll try. Have you tried basic maintenance? How much ram is installed?
Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751
Check your login items. Check to see which items you can eliminate or disable.
If you have Diskwarrior, Techtool Pro or Drive Genius run them directly from the disc.
Message was edited by: CMCSK

T430s Takes Several Minutes to Shut Down

Hey all,
I've got a T430s running Windows 8.1. The machine runs great and boots very fast (probably helps that I bought an SSD); however, when I shut down, it takes several minutes (5+ minutes) to fully power-down. The screen goes black, but USB devices continue to have power and the fan still spins until finally it powers down. The same issue happens when I close the lid and put the machine to sleep.
Before anyone blames Windows 8.1: This didn't happen right after I upgraded to 8.1. It seemed to start several days after the 8 --> 8.1 upgrade, and I'm not sure what variable changed to cause this.
Any ideas? Thanks!

Nothing in either the System or Application logs that would indicate that there were any problems shutting down. I can see where User32 indicates that the "power off" shutdown has been initiated, then about 5 more log entries in System after that, all of which appear to be normal (i.e. related to services shutting down). The time on these records are all within a few seconds of each-other. I don't see any outliers that are a few minutes out (i.e. things logged several minutes after the shutdown).
One thing I did just notice is that I see the following Critical notice from Kernel-Power after booting up from shutting down:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
So it's not even going down cleanly. But I still have no idea what the offending driver/service/app is.

Opening Excel 2010 files from Explorer takes several minutes

I am running Excel 2010 on Windows 7. For the last year I have had no problems, but today I find that if I try to open any file from Windows Explorer (e.g. by double-clicking it), or from an item pinned to the Task Bar, it takes several minutes to open Excel.
If I open Excel directly it opens very quickly. I can also open any of the "problem" files in an instant when Excel is open (e.g. from the Recent Files list or from the File...Open dialog). All of the files in question are on the local hard
disk.
I don't have this problem with MS-Word.
I saw another post here which recommended unchecking the "Ignore
other applications that use Dynamic Data Exchange (DDE)" option, but I didn't have this option set in the first place.
Does anyone have any other suggestions for fixing this?

Double click an excel file, when the excel loading window appears, start Task Manager, terminate the excel process, then re-open the excel file to test if this issue goes away.
Also someone resolved this issue by installing an add-in. Have a try.
File->options->Add-ins->Select "Excel Add-Ins" in Manage list box and click button "Go..." ->Tick the add-ins that you want and click button "OK"
http://excel2007-slow-open-file.blogspot.in/

Firefox takes several minutes to load

It takes several minutes for Firefox to load every time I log in. Takes longer if computer is started. Have troubleshot everything I could find with no avail. It's getting old and all that I have read I can't believe Mozilla has not heard and fixed this problem.
== This happened ==
Every time Firefox opened
== I think it was when I updated.

The question certainly isn't solved. I have no trouble with speed when entering sites - it's just when first trying to enter Mozilla. I tried IE this morning as a test and was into the home page in a few secomds. Moxilla 8 takes about a minute and a half. Version 3.6 loads immediately. I previously tried vers 8 a couple of weeks ago and web sites took a long time to load. This was not a problem after using vers 3.6 for a while and then re-downloading vers 8. I am still frustrated by the slow load up time it takes to get to the home page and believe this may be something the system administrators need to fix..

Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time. You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up. Like it

Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time. You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up. Like it is frozen. I have tried rebooting the computer and it works for a few minutes then gets stuck.

Which model iMac do you have?
How large is your HD and how much space do you have left?
Check out the following & do the necessary:
User Tip: Why is my computer slow?
What to do when your computer is too slow
Speeding up your Mac
OS X (10.6.6)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.

My macbook pro (lion 10.7.2) takes several minutes to connect to the internet after waking from sleep. Is there any way to make this instant?

Hi
My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep. Does anyone else have this problem and is there a fix?
Alan

coxorangepippin wrote:
The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
What that means is that is can't be used with Lion 10.7. PowerPC was the chip Apple used up until 2006 when they switched to Intel. At that point, they created the Rosetta emulator to allow for PPC support for 5 years. They finally dropped the support with the release of Lion. It will only work with OS X 10.6 or earlier. The other option is to purchase a new GPS, which can be had for $100 for a decent one.

How can I resolve an issue where webpages take several minutes to download? Other computers working on the same home network take not time at all.

Firefox would not load webpage despite there being an active internet connection to the computer. I know this because firefox loaded on another home computer without any issues. I reset the ip address on the computer in question through cmd.exe and this helped the issue to an extent however it take several minutes to load webpages. I can also advise tha Internet Explorer suffered exactly the same issue and it gave me an error message early when unable to load webpages, that a remote firewall may be blocking the connection. It suggested to configure the firewall to allow connections thru TCP port 80.

Hello ,
Can you please post your ADSL stats by following this direct link; http://192.168.1.254/index.cgi?active_page=9116 << it only works if you have a Home Hub 2.0+ and remember to type your password in.
Also we need a speedtest Use this link http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 as it will also help you diagnose and give you a list of solutions afterwards, it does incorporate the http://www.speedtester.bt.com one though as well.
It sounds to me that you have a low profile, with your stats we can see if you've been having disconnections which makes the exchange raise your Noise Margin to try and increase your stabibility, but at a cost of speed, it may have been that your sync speed has recovereed, but not your IP Profile.
Here are some helpful (I actually did find them helpful!) tips from BT: http://bt.custhelp.com/app/answers/detail/a_id/35079 up to you whether you want to read those tips, because I did actually find them helpful.
Can you comfirm that you have no noise on the line. Really a test by dialling 17070 and pressing option 2 for the quiet line test should be completed in the Master Socket with no other devices connected to the line. ANd also do you have a master socket with a split faceplate that you can unscrew the bottom half, if so behind there is a hidden 'test socket', it disconnects all your internal wiring so just to make sure its not a fault inside your premises.
Regards Edd
Check your Line
BT Speedtester

In Windows Vista 7, SP2, Firefox takes several minutes to launch, is non-responsive, hangs sometimes launches additional windows without my clicking. I get error code 10003.

I'm using Firefox 6.0.2 in Wndows Vista 7, SP2. I'm using Norman Security Suite anti-virus software. Firefox behaves erratically. Sometimes it takes several minutes to launch. If I launch an new window it sometimes hangs. It launches two extra windows without my having clicked to launch. Always two. I get an error code 10003 but when I search for this I get no information about it.
Windows Task Manager shows plugin-container for Firefox running in addition to firefox.exe.

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Restore the default home page
* https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page
Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Check and tell if its working.

Problems with starting the Integration Builder

Dear all
We've installed PI 7.0 as a part of a project, and have some consultants working in the integration builder and rwb.
Recently the we are unable to start the Integration Builder, and we get an error message prompting: "Unable to launch the application"
The Builder has worked flawlessly earlier, and the problem have suddenly appeared during the last week.
The Java error is:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://<serveradress>:<port>/dir/directory/iaik_jsse.jar
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.io.FileNotFoundException: http://<serveradress>:<port>/dir/directory/iaik_jsse.jar
     at sun.reflect.GeneratedConstructorAccessor2.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
     at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
     at com.sun.deploy.net.BasicHttpRequest.doGetRequest(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: <serveradress>:<port>/dir/directory/iaik_jsse.jar
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at java.net.HttpURLConnection.getResponseCode(Unknown Source)
     ... 18 more
Does anyone have a clue or answer to this strange problem?
Regards
Andreas

Hi,
Refer this thread;
Unable to Open Integration Builder
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
Regards,
Nithiyanandam

Since some days my MacBookPro 2011 is slow on start up. It takes 3 minutes from the gingle to the Password. What to do???

Since some days my MacBookPro is slow on start up. It takes 3 minutes from the gingle to the password. The operation system is OS X Lion v. 10.7.4. What can I do???

in system Preferences > users and groups>admin>log in items
What is there?

Start of integration builder takes several minutes

Similar Messages

Maybe you are looking for