Start Page is not showing up-to-date after running update

Run the update, about shows 9.0.1 and UP-To-Date... but everytime I open the browser, it shows that i'm behind and need to update? I've refreshed, etc.. still won' accept that i am up-to-date

If you use the www.google.com/firefox site as home page that previous Firefox 3 versions use as the home page then you can ignore the message about not using the latest Firefox version on that page.<br />
Google no longer seems to maintain that page.
Google assumes that you use an older Firefox version if you still visit that site and warns you that you use an older Firefox version and suggests to update.<br />
You can use another page as the home page like about:home or www.google.com or www.google.com/ig (iGoogle).

Similar Messages

  • BI page does not show me latest data..

    Hi,
    I have an application which continously updating the database which BI is referreing to.
    And I am observing my BI page, I dont see the updated data. It always shows me old data. The latest data gets reflected only when I do "Update row count" in Admin tool for rpd.
    Please help in resolving this.
    thanks
    Shubha

    This is a generic comment. Always have a caching strategy in place. BI EE is one of those unique toolsets that gives you wonderful caching mechanisms. But again if this is not properly used it can be a bane for most systems. So, if you are reporting out of a real-time transactional system where data changes in real time and also if you want to see ( as a report end user) these changes then disable the caching as Chino and Elio said. But if you are reporting out of a data warehouse where data changes after a weekly or a nightly cron job then just have caching in place for that period of time. You can purge the cache on a daily basis. Check my blog entry here http://oraclebizint.wordpress.com/2007/12/18/oracle-bi-ee-101332-scheduling-cache-purging/ for purging the cache. That should give you an idea. But again as always careful planning has to go through before deciding on the type of caching you would need.
    Thanks,
    Venkat
    http://oraclebizint.wordpress.com

  • ADF: Printable page is not showing all the data

    Hi Everyone,
    I am using Jdev 11G.
    I have one ADF page with Read Only Table.The table has 14 columns.
    I have Print button at the bottom of the page. When i click on print button my page is converted to Printable page but it is showing only 10 columns.(so im unable to print all the data in the table)
    How can i make it to show all the columns in the table in printable page?
    Plz help.
    Any suggestions will be really grateful.
    Thanks.

    Hi Arun,
    In the following code: public SelectItem[] getAllPrinters() {
    if (allPrinters == null) {           // allPrinters is not defined. what type of object it is
    PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
    allPrinters = new SelectItem[printers.length];
    for (int i = 0; i < printers.length; i++) {
    SelectItem printer =
    new SelectItem(printers.getName(), printers[i].getName());
    allPrinters[i] = printer;
    return allPrinters;;;
    Variable allPrinters is not defined. what type of object it is?
    And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
    value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
    id="soc1"
    autoSubmit="true">
    <f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
    </af:selectOneChoice>.
    Thanks.

  • My Stuff Not showing in Nokia N8 after Anna Update

    Hi Guys,
    I m fed up with my Nokia N8 New Anna Symbian Software as after updating to it, i m unable to use Ovi Store. It gets stucks on My Stuff Page..... I gave my N8 to nokia care 3 times regarding this problem, each time they format it. Reinstall Anna and Ovi. But still the same problem. Infact I deleted my Ovi Account 3 times and made a new one 4th time.... I thought may be this problem is because of that, as i have download History in those account.
    I Have tried all possible Tricks and Methods posted on This Nokia Support Forum.
    I have tried the Following Tricks and methods:
    1. Reinstalling Anna and Ovi.
    2. Istalling Ovi Store manually by unsinstalling it.
    3. Updating Ovi Store form version 2.12.042 to 2.12.043
    4. Manually Installing all QT files.
    5. Deleted my 3 Ovi Account and created 4th Account.
    But still the same problem. M trying these all since last 5 days continuously........
    So Plllleeeeeaaaaaassssseeee Help........ ASAP!!!!!
    Please..... Eagerly waiting for replies!!!!!!!!!!!!!!!

    I've got the same issue after upgrading my E7 phone to Symbian Anna on 19 Aug.
    Found this link today :
    /t5/Software-Updates/Symbian-Anna-Troubleshooting/td-p/1127953
    But it didn't help fixing the issue with Nokia OVI.
    There is a purchased software that I need to reinstall on the phone but it is not possible now, My Stuff section in Ovi Store app is stuck at loading.... for ever.

  • Crystal report not showing correctly in firefox after windows update

    From the past six months, crystal reports has been displayed without the print toolbar and the formatting is completely lost in firefox. Previously we found that when we uninstall the windows updates KB2836942, KB2836943, KB2836946, KB2836947, the problem is resolved. But with more and more windows updates that are automatically updated on the servers, it is getting practically impossible to track which windows update creates the problem. There is absolutely no issue in Chrome, IE and Opera; it is only with firefox that this problem occurs; so we feel it is more of a firefox issue than a windows update problem. It is not just in one machine, but we found the same issue at all our customer's servers (more than 10). The servers are a mix of windows 2008, windows 2012 with iis 7. We also observed the same problem on windows 7 machines. We have been recommending firefox as the best browser for our software to all our customers, and with this problem cropping up, we are badly handicapped. Kindly let us know how to sort this issue. We have provided the link below for your perusal. When you open it in chrome it works fine, but on firefox it does not display correctly:
    http://54.209.141.3/Reports/Report.aspx?reportname=RptProductWiseSalesDetails.rpt&paramlist=@FromDat,01/01/2011;@ToDat,01/26/2014;@BranchSlno,1;@FranchiseSlno,1;@FirstCol,B;@DateType,B;@SaleChannel,A;@ProductTypeSlno,0;@ProductSlno,6;@ColorSlno,0;@FinancierSlno,0;@ChannelTypeSlno,0;@ChannelSlno,0;@SalesPersonSlno,0;@SaleStatus,L;@BillingType,A;@LoginUser,admin;@LoginBranch,Keerthi%20Triumph%20Bangalore;@Franchise,Triumph;@AddCustomerDetail,0;@SaleCodeSuffix,&loadfromsql=0

    Those four updates all relate to the .Net framework, and involve how an ASP.Net application recognizes different browsers.
    * http://support.microsoft.com/kb/2836942
    * http://support.microsoft.com/kb/2836943
    * http://support.microsoft.com/kb/2836946
    * http://support.microsoft.com/kb/2836947
    Each contains this Note:
    <blockquote>There is a configuration switch to be used to revert back to the old behavior: <br>
    <pre>&lt;appSettings>
    &lt;add key="aspnet:UseLegacyBrowserCaps" value="true" />
    &lt;/appSettings></pre>
    </blockquote>
    I think the downside of turning off the changes is that IE 11 will not be well supported.
    That's all I know so far...

  • Dynamic Portal Page does not show but called procedure behind it works

    Hi I run into a bug that I try to solve unsuccessfully for 2,3 weeks. Here is the problem. I have portal dynamic page that execute a PL/SQL procedure to delete and insert data into a remote app table. When I compile and execute the procedure in Toad it does not give me any error or warning. But when I execute this procedure in my dynamic page the page does not show up but I check the results and data does delete and insert. So my procedure works behind the scene but the page does not display. As I look into detail of my code I found out that when I rem out the insert statement my page does show up and delete the data but when I put back the insert statement my page does not show up and data insert to the table. Here is my code structure of my procedure in plain words. I have a procedure that have a cursor for loop that
    check if a certain condition exists if it is then it will delete data from the remote app table then insert a select statement data from 2 joins tables. Any one have run into similar situations like this and have any idea, please help. Thank you all.

    The scripts for this should have shown as:

  • TS1538 The device do not show at the itune after update at itune

    How to solve the device do not show at the itune after the update thru itune.
    Now the ipad mini keep show the screen on "USB syr to itune"

    Try and turn off iPad and proceed to step 3 of Recovery Mode.
    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • After installing or upgrading to Firefox 31, starting Firefox does not show homepage, customize shows a blank page and the option button does not work

    I am the Windows admin for a university department and install PCs with Firefox all the time. This problem does not happen with every PC I maintain, only a select few (different model laptops with Windows 8.1 and update 1.) Until today, it only happened with new user accounts (with admin rights) that I setup on the laptops for our staff. Today this happened with The Administrator account while setting up a new laptop. In all cases so far, I install Windows from a saved image that was created using sysprep.
    I have tried the many suggestions of resetting Firefox, deleting the users Firefox profile, deleting the users Windows profile, uninstalling/reinstalling Firefox, uninstalling/reinstalling Firefox and the latest Java, but nothing helps. After uninstalling, I run an app to delete temp files and caches and will even manually remove registry keys HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. Plus I reboot and make sure the install folder is deleted after uninstall.
    Results are the same: after installing Firefox 31, the initial setup window for migrating IE and/or Chrome pops up and after clicking the Finish button, Firefox starts, but does not show the initial new user page, only a blank page. Clicking on the Options button (3 bars) does nothing. Right-clicking in the proper area, the popup menu appears so I can choose to Customize, but that only opens another tab with about:customize in the URL and the page is blank. From the right-click popup menu, I can enable the Menu Bar and get to Options from that.
    My latest attempt has helped a little. I uninstalled Firefox 31, cleaned up, deleted user Firefox profile, rebooted and then installed Firefox 30. Inital startup runs, and tells me I'm not up to date, and the Options button works. But I still cannot customize.
    I then upgraded to Firefox 31, but then it's back to no startup page, no options button and no customize. I can downgrade to 30 and get all but customize working again.
    Only Addon is one for McAfee Scriptscan for Firefox 15.1.0, which just after installing is disabled.
    Any help would be appreciated. Thank you.

    Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
    Normal or safe mode still has same result. No startup, no option button and no customize.
    Thanks for your help. Got any other suggestions?

  • I have chosen a persona, but when I start up Firefox, Mozilla start page with Google shows, and persona is just barely visible only in the toolbar area. How do I get the persona to show, and not Google start-up page?

    I checked out the Mozilla Personas, saw one I liked, and added on. When I start Firefox, the Mozilla start-up page shows as usual with Google on it. The Persona I chose barely shows, and only in the Toolbars area at the top of the screen. Can I modify the start-up page to not show Google, and access Google another way, so that my Persona will show on the whole start-up page?
    == This happened ==
    Every time Firefox opened
    == I added-on Persona

    As you can see from the [http://support.mozilla.com/en-US/kb/Using+themes+with+Firefox using themes with Firefox] article, personas are "''lightweight themes that can change the color scheme and background image of the Firefox toolbars''" and they wouldn't change the webpages.
    If you don't like seeing Google as your home page you might want to look at [http://support.mozilla.com/en-US/kb/How+to+set+the+home+page how to set the home page] and change it.
    Finally Firefox 3.5.x will be maintained with security and stability updates until August 2010, so you might want to [http://support.mozilla.com/en-US/kb/Updating+Firefox update to a newer version].

  • Help! One page is not showing correctly in my browser

    Can someone please help me before I turn grey allover my head ?
    My website:
    www.ontpopt.nl
    The 3rd page is not showing / coming up after transfering it to my server.
    In muse all is fine, everything works as I designed it. But after uploading to my server the page is gone.
    I tried making a new page, tried to use a different basic page, I even tried to adjust the design. That is different now then when I started. I just don't know where to look for the problem or how to solve it. Because it doesn't has a problem in muse???
    Is there somebody who can help me please?
    Thank you, greetz chantal

    Hello,
    Are you getting the same issue when you try to preview site from File > Preview Site in Browser ?
    If yes then looking at the site I can say that its not able to find the page ideeën-ontpopt.html at the server.
    This could happen due to disabled export page option. Please go to Plan mode and right click on the page and make sure "Export Page" is checked as shown in the screenshot below. I would also advise you not you use any special character in Page name.
    If the issue still persist please share the .muse file with us for further investigation.
    Regards
    Vivek

  • LOV does not show newly added data in the same session

    Hi guys,
    I work with JDeveloper 11g Release 2. We use Oracle ADF to develop our web app.
    In a page we have a LOV (say the page name is "a"). The related data for that LOV is inserted to the db in another page ( say the page name is "b").
    When new data is added in the page "b" and goes directly to the page "a" the LOV does not show newly added data. But if the user log out and log in again
    LOV shows newly added data correctly.
    Is there a way to show the newly added data in the same session without logging out? Please help.
    Regards !
    Sameera.

    Add the following method in your ViewRowImpl base class:
    public void refreshLOVAccessorQueries() {
        List lovs = getViewDef().getListBindingDefs();
         if (lovs != null) {
             for (Object obj : lovs) {
                getListBindingRSI((ListBindingDef)obj).getRowSet().executeQuery();
                 ListBindingDef lbd = (ListBindingDef)obj;
    Export that method to the Row Client interface, add him to the pageDef, and invoke in the executables section of the pageDef:
        <executables>
    <invokeAction Binds="refreshLOVAccessorQueries" id="callRefreshLOVs"
    RefreshCondition="#{!requestContext.postback and empty bindings.exceptionList}"/>
       </executables>

  • My start page is not displaying menu options such as file, edit, view, history, bookmarks

    the start page is not displaying menu options such as file, edit, view, history, bookmarks, tools, help

    Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark.

  • The home page does not show the awesome bar or file,edit,view,history,ect.

    The home page does not show the awesome bar or the file,edit,history,bookmarks,tools or help options anymore. how can I get these feature to come back up. All it shows now is latest headline & getting started.

    * In Firefox 3.6 versions on Windows and Firefox 4 on Windows and Linux it's possible to hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu of a toolbar.
    * Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
    * Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
    See also:
    * [[Menu bar is missing]]
    * http://kb.mozillazine.org/Toolbar_customization

  • Iphone 4 Calendar date not showing the write date

    I just upgraded to the ios 5.1.1 from 4.2.1. I have a Iphone 4. After the upgrade, my iphone's Calendar date is not showing the right date. in order for the right date to show, I either have to re-start my iphone or I have to go into settings/general/date&time and turn off the set automatically off than on in order for it to show the right date. I didn't have this problem before the upgrade. I hope someone can help?

    I had a similar problem and then found that my calendar was not set for the right date and year.  Check that first.

  • The Counter on Welcome page is not showing up. How to find it?

    Bottomest line is: My first Welcome page is not showing the Counter. I put a counter on it and nothing shows. I tried disassembling the page by lifting layers, and maybe I did it incorrectly, but I cannot find the errant Counter.
    I tried going to the menu and de-selecting the Counter and then selecting it again, but that did not fool iWeb. It did not put a second Counter on my Welcome page because it knows that Lorna already put one there and it does not care that to the average non-Superman eye, it is invisible.
    QUESTION:
    How do I find that invisible Counter? What must I do, or do better?
    — Lorna in Southern California

    Is the welcome page the page with the big picture of
    a flower overlaying everything, linking into your
    site? Your page source does show a counter to be
    present at location 34 pixels from top of page and 40
    pixels from the left, but you have the picture over
    it!
    .......... Lorna says ................................................
    Yes, that is the welcome page: the pink flower. What page source? How do you see a page source? Anyhow, I went to the Welcome page in iWeb and moved the pink flower picture to the side and out of the window. I see nothing! No Counter and no picture covering a Counter. The only picture I see is my pink flower picture.
    It is probably still counting, but you won't be able
    to see it. If you remove your picture (or make it
    smaller) and republish you will see it.
    .......... Lorna says ................................................
    But I have moved the pink flower picture away and have cleared the field and see nothing. I did not make the picture smaller; if I can just push it out of the way, why would I need to make it smaller? (I suspect I am missing something here.)
    Lorna in Southern California

Maybe you are looking for