Start Partner Connectivity Kit Tools

Hello,
i have installed PCK successfully, and i can start the PCK with http://<J2EE-Host>:<J2EE-http-port>/pck/start
But:
If i will start the configuration >> click the Link "PCK"
the following path is appearing: http://sap.com/com.sap.xi.pck/:50000/pck/start/pck.jnlp
and it doesn't open me the user interface!
What can i do?
Can anyone help me?
kind regards
Werner

Hi Michal,
yes i have tried this i think i know now what my problem is:
According the hintnumber: 746328 on http://service.sap.com/
i have to make changes after deploying the SAPXIPCK_X.sca file.
Changes have to be done in the file "aii.properties" but this file doesn't exist that's my problem
Do you have any idia to solve the problem
Thank you
Kind regards
markus

Similar Messages

Adapter configuration in Partner Connectivity Kit

I used sap sample adapter as sender and File Adapter in partner connectivity kit as receiver, I configured both sender agreement and receiver agreement,both adapters just do the file processing, it is very simple, but still do not function, are there any tricky i need pay attention to?

Hi,
Yes the PCK is enough to test your development. In order to do so you need to configure a loop scenario:
You must set a number of xiadapter properties with the J2EE Visual Admin Tool
See help.sap.com under "Configuration Objects for the Adapter Test" (http://help.sap.com/saphelp_nw04/helpdata/en/f7/0c2441509fa831e10000000a1550b0/content.htm)
You must create one communication party in the PCK with one service.
For this party/service, you also require a sender and receiver channel with the adapter type to be tested.
You must create one sender agreement and one receiver agreement.
rgds Johan

Partner Connectivity Kit

Hallo, XI-experts,
I would like to test the Partner Connectivity Kit.
What product need I for this item ?
I have saw in SAP-Shop:
-SAP Exchange Infrastructure 2.0 SR1
-SAP NetWeaver 04 SR1
What of this product must buy my company?
Many thanks !
With Regards
Elina

Hi Elina,
Please go through these links and get a better idea of what you want.
http://help.sap.com/saphelp_nw04/helpdata/en/99/115281baba404890d2561617a78409/frameset.htm
/people/jin.shin/blog/2006/03/09/pck-for-enabling-testing-sap-netweaver-xi-adapter-scenarios
https://websmp201.sap-ag.de/~sapidb/011000358700009389182004E.PDF
https://websmp201.sap-ag.de/~sapidb/011000358700002178612004E.PDF
http://help.sap.com/saphelp_nw04/helpdata/en/19/586b41f1b37e47e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/30/3ee23f671b0e5fe10000000a155106/frameset.htm
Regards,
abhy

PI Partner Connectivity Kit initial setup

Hi,
I have installed PCK 7.1 sp4 version ON WINDWOS 2003.
My back end system is ECC 6.0 sp13.
I had created 3 user ids for PCK in 001 client of ecc 6.0 system.
User ids :
Sap_jsf_pc1 ( copy of sapjsf)
J2ee_adm_pc1 (copy of j2ee_admin)
J2ee_ges_pc1 (copy of j2ee_guest)
Know i am executing the PI Partner Connectivity Kit initial setup in
nwa.
i select a setup local sld in pck kit wizard.
in 16th phase of i am getting below errors in
wizard.
Error: Name or password is incorrect (repeat logon)
Step: Create group SAP_SLD_DATA_SUPPLIER
For more information kindly check the attachment.
I am able to logon with j2ee_adm_pc1 user id in ecc and pck systems.
i have created manually all lcr roles and sld data supplier groups and
assigned j2ee_adm_pc1 user in ECC 6.0 and PCK user admin.
In PCK system ecc 6.0 and pi 7.0 system are running with different
databases.
Kindly let me know the solution for this
Regards
Pooja

{0}#1#java.io.FileNotFoundException: D:\\usr\\sap\\SX1\\DVEBMGS00\\j2ee\\cluster\\server0\\aii.properties (The system cannot find the file specified)
You have to place aii.properties on specific folder.
This file should be on your PCK installation DVD.
SAP Note 746328

JNDI in Partner Connectivity kit

I deployed an SAP XI adapter in Partner connectivity kit, but did not find the way to configure the jndi. How to configure the jndi of connectionfactory in partner connectivity kit,

Could you be a little more specific? Which adapter did you install, the sample from SAP? Or a third party adapter?
You can get at the JNDI name through the Adapter metadata file which is loaded at config time, but I would not recommend changing it unless you have good reason.
As far as I know the JNDI has to follow a particular pattern for a JCA adapter to work in the AF, and so you can't "configure" it really, it is either correct, and the AF will be able to do the lookup of the ConnectionFactory, or it is not correct, and it won't. I think the format is pretty much : "deployedAdapters/<adaptername>/shareable/<adaptername>" and can't be altered. As far as I know that is, but if anyone knows better please correct me!
Cheers,
Chris

How to use Partner Connectivity Kit ?

Hi
Can any one please tell me how to work with Partner Connectivity Kit? If u send me any demos or examples it will be very helpful
Best Regards
Ravi Shankar B

Hi,
Check this as well
Pdf:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f9fc190-0201-0010-0cbd-87f50e404d91
Conversations:
XI Partner Connectivity Kit
partner connectivity kit
Regards,
Ram

Uninstall Partner Connectivity Kit (PCK)

Hi experts !
I installed PCK on XI system.Now, how to remove it to switch to XI Adapter Framework.
Thanks a lot
Edited by: vn thach on May 25, 2009 12:08 PM

>
vn thach wrote:
> Hi experts !
> I installed PCK on XI system.Now, how to remove it to switch to XI Adapter Framework.
> Thanks a lot
> Edited by: vn thach on May 25, 2009 12:08 PM
Refer page 16 of this document:
[Troubleshooting Guide|https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000659947&_OBJECT=011000358700005909032005E]
You need a S-user Id to acces the document.
Regards,
Abhishek.

Partner Connectivity Kit (PCK) Licensing

I'm investigating the deployment of the PCK for a small integration project, but am unsure of the licensing model. I know there is a separate license for each productive PCK instance that you install (DEV and QA systems covered by the same license), but does this license also cover the J2EE instance that you install the PCK on top of or do you license the PCK and J2EE separately (i.e. buy two separate product licenses)?
Thanks in advance for your assistance.
Regards,
Andrew

Andrew,
the only way to have good info about license is to contact local sap office
such questions should not be answered by anyone else then by SAP officials I believe
>>>I'm investigating the deployment of the PCK for a small integration project, but am unsure of the licensing model
if you have a small project you can also use SAP business connector 4.8 (based on new sdk)
Regards,
Michal Krawczyk

Jack-audio-connection-kit doesn't start

Hi,
I need jack-audio-connection-kit Daemon running for use in some other programs, but it seems it dies immediately after starting. See:
[ja@kamahl ~]$ sudo /etc/rc.d/jack-audio-connection-kit start
:: Starting Jack-audio-connection-kit Daemon [DONE]
[ja@kamahl ~]$ ps -e|grep jack
<no output>
I know this is a bit dumb question, but I really have no clue where the problem could be. Do you?

hello,
i'm having the same problem, i can flawlessly run jackd either via CLI and qjackctl, test sound with mplayer, etc.
However, i can't seem to find a solution that let's me do all this as a normal user:
Error output:
jackd -d firewire
Password:
no message buffer overruns
jackd 0.116.2
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
can't load "/usr/lib64/jack/jack_firewire.so": libasound.so.2: failed to map segment from shared object: Resource temporarily unavailable
cannot load driver module firewire
some info:
$cat /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
####none /dev/shm tmpfs defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
UUID=512fbb4a-7c37-4a91-94fd-c2f75bc3ad1c swap swap defaults 0 0
UUID=ce95308e-a444-4d12-a3bf-a1abdcc82eed / ext4 defaults 0 1
lsmod | grep 1394
dv1394 21832 0
ohci1394 34052 1 dv1394
raw1394 29000 0
ieee1394 98912 3 dv1394,ohci1394,raw1394
Should I change udev rules group to audio? How do I do that in Archlinux? :$
$ ls -l /dev/raw1394
crwxrw-rw- 1 root video 171, 0 2009-07-12 14:31 /dev/raw1394
I think it's some sort of permission problem....Any suggestion is welcome! thank you!

Camera Connection Kit Weirdness

When I plug my Camera Connection Kit into my iPad 1, with nothing in it or connected to it, I get the error message "Cannot Use Device. The connected USB device requires too much power."
Again, this is with no SD Card inserted, or USB connection used. Just the white Kit dongle, plugged into the device, leads to that error message.
It USED to work.
This error message does not occur when the switch on the back is on the USB side, only when it's on the "SD" side. But then again, I want to use it with SD cards, so that's the only side that matters.
Any ideas?
Thanks!

same issue myself. Had a cheap usb and sd card connector kit off eBay and it worked fine. Since updating to iOS 7.1.2, it didn't work. Took a trip to the apple store today and bought a genuine lightning apple sd card reader. Tried it in the apple store on one of their iPads, with my sd card and had the same issue.
upon connecting and inserting sd card (sandisk 32gb extreme) brings up the import screen, you see some blank tiles, then after about 40 seconds, the import screen disappears. Discussed it with apple store rep and he offered to replace the cable, I did, same issue. It HAS to be a firmware issue, as it was working fine prior to the update On the cheaper, non genuine attachment.
ive rebooted, refreshed, even started iPhoto first, still have same issue. Why oh why do Apple mess with stuff when it works fine in the first place?
any advice or tips, please drop me a line
edir- pics are in JPEG format and taken on Nikon d3100 so in proper dcim folders. Using ipad retina

TomTom Car kit tool

I bought a TomTom car kit tool for my first iPhone 3G now I have a Ipone 5G.
Of corsse I can't connect the new iphone to TomTom accesory.
I bought a jumper adapter between 30 pin connctor to lighting connector (LIGHTNING TO 30-PIN ADAPTER MD824ZM/A).
Than I discover that iphone 5 dosen't support the tom tom car kit tool.
Why apple don't update the car kit tools application for using with iphone 5?
As is know, this tool contain a aditional GPS which can backup the iPhone GPS without to need the cellular connection.

Why apple don't update the car kit tools application for using with iphone 5?
Because any app would be TomTom 's App not Apple 's
Why doesn't TomTom bring out an iPhone 5 holder .................

Presentation connection kit

My business office is considering buying an iPad Mini tablet. We currently also have an aging MacBook, which will eventually have to be replaced. (Probably with a MacBook Air)
We want to assemble a "Connection Kit", so that we can take the iPad (or possibly a future MacBook Air) on the road for business and personal presentations. Some meetings would be small, with one of us meeting with only one or two people. Other meetings may be a room-full. We already have an Epson EX7200 projector, but we can't always take it along.
The Kit should be able to connect to variety of presentation interfaces so we are prepared even when we don't have the Epson with us. We want to focus on having a Kit that will enable us to use an iPad to connect to HDTV's and also digital projectors.
We would appreciate pointers on what we should incorporate into our Kit so that we are not lacking any basic connectors. We already received the suggestion that an AppleTV box would be a helpful tool. But what about other connectors for the iPad? Any suggestions?
Thank you for your time and suggestions.
--WA

Are you considering setting up your own wireless network for these presentations so your completely independent
If so you'll need some sort of wireless router or wireless AP
You don't really need an Apple TV to mirror iOS devices
Have you considered software like airserver which mimics an Apple TV allows airplay and mirroring iOS devices to your laptop. The laptop with airserver installed can be connected to a projector as you would normally
Your iOS device can then wirelessly mirror to the laptop, providing they are both on the same wireless connection
http://www.airserver.com
Air parrot can mirror your laptop screen to an Apple TV
http://www.airsquirrels.com/airparrot/
Airparrot is really only required if your running and older version of osx and need to mirror your desktop wirelessly to a Apple TV which is connected to a projector or some other display
Newer versions of osx include desktop mirroring
If you are going to use an Apple TV I'd think you'd need hdmi to VGA to connect the Apple TV to standard VGA projector
Along with hdmi cable if the projector has hdmi input
VGA connection doesn't provide any audio connection
So you'll need an audio cable to connect the hdmi to VGA adaptor to whatever audio system you're using plus any adapters you might need 3.5mm to 6mm, RCA etc etc
The hdmi to VGA adapters I've used had a 3.5mm stereo connector on them for this reason
Sound isn't usually a problem if your mirroring to a laptop because you can usually configure the sound output to go were you want and most locations would be expecting a laptop to connect to their AV system not an Apple TV which may or may not be a problem. e.g the hdmi cable may go straight to the projector and no where near the audio system
I would say it's better to be repaired for both scenarios so you've got something to fall back on

I have a Blackberry 8330 and a MacBook. For some reason I started having connectivity issues. The handheld will not sync with the computer via pocketmac. I have uninstalled, etc 15 times. Please help

I have a Blackberry 8330 and a MacBook. For some reason I started having connectivity issues. The handheld will not sync with the computer via pocketmac. I have uninstalled, etc 15 times. Please help

Hi Peter!
I'm sorry to read that you are having issues with your Sync account.
Your best bet is to follow the steps described in this blogposts and open a bug:
https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/
After that, if you don't want to user Sync in your computer, you can stop it with this simple steps:
* At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options.
* Once the options window opens, click on the Sync tab.
* At the bottom of the Sync tab click on '''Deactivate this Device''' link

Problem with camera connection kit and IOS 5

Since I upgraded my IPAD 2 to IOS 5 camera connection kit is no longer working properly:
- when importing from a given CF card for the first time camera connection kit it is working with my camera (Canon EOS 7D)
- however, as soon as i take additional photos on a non-empty CF card, things start getting weird when importing:
- duplicates are no longer reliably recognized (some of the photos imported before are indicated as duplicates others not), hence an incremental upload of photos is no longer viable
- some RAW photos are corrupted during import (it shows an "RAW" icon in the photo app, but no preview and the photo cannot be enlarged)
I never had such problems with IOS 4.x I'm really frustrated about IOS 5.0 since camera conenction kit and the ability to deal with RAW photos were my main reasons to buy an IPAD...
Anybody experiencing similiar problems? Any viable workarounds?
Thanks
Claudio

Friend, you say "The files must have a filename with exactly 8 characters long (no spaces)" What if one has several hundred photos/files. Renameing them on my computer each 8 characters long adds an extension (1), (2), (3), and so on. For example, "JUNE2014(1). The connection kit won't read the photos due to the extra (1). How can I fix this without having to rename each of the hundreds of photos one by one?
Thank you, Cisco.

Camera connection kit - Write to card?

Would the following work with an iPad and the Camera Connection kit?
1. Connect an SD Card or Compact flash card with RAW files from a camera.
2. Import all the images from the card to the iPad.
3. Delete bad images on the iPad.
4. Export the remaining (good) images as backup to another SD Card or Compact Flash card, in case the iPad gets lost?
5. Three weeks later when you get back home, transfer all the good files to a desktop for normal processing.

It remains to be completely clarified exactly what can be done, but after import you can delete photos - not that that's a great idea - on the card.
That means that some "write" are allowed - that is write to the file system structures to delete the photos.
Is this a privilege available only to the Photo App??
I don;t think that general writing is allowed. In part becasue it balks at a thumb drive - not supported. (Though I haven't yet tried to make a thumb drive look like - i.e. have same directory structure as a SD/CF card.)
I expect to look into this from a programming point of view, but not for a while - got shooting gigs to do first.
Photography isn't why I got an iPad, but it would eb neat if it could replace the Mac Book I use in the field.
For me writing back to an external drive is important for backup.
When in the field with my MacBook I:
Upload the images, delete obvious duds, rename them and add metadata.
Then back up to 2 external drives.
Put CF cards back in Camera and format and start shooting again.
Steve

Start Partner Connectivity Kit Tools

Similar Messages

Maybe you are looking for