Start position follows playback
I am new to waveburner (and logic). I am looking for a way to set waveburner so when the transport is stopped, the cursor (start position) returns to the previous start position. In other words, you can start and stop playback repeatedly and the playback always begins from the same location.
The default behavior is having the start position follow the cursor during playback. I would like to change this...
Is this possible?
I know this is an option in both cubase and protools...
Thanks!
Zak Cohen - The Woodshop Studio
www.woodshoprecording.com
Hi Zak:
You can probably accomplish this by setting up a loop in Waveburner. (Do a search for Looping Playback in the WaveBurner manual). Loops can, according to the manual, be set up as follows:
To define a cycle area
In either time ruler, drag from the desired loop start position to the point where you want
looping to end.
Drag either of the cycle area handles to resize an existing cycle area.
You can also grab the center of the cycle area to move it, without changing the cycle
length.
That said, this used to work for me, but no longer does. I am going to post a message to that effect and find out if anyone has a solution.
Similar Messages
-
Set Start Position to Calculate Travel Time in Calendars
Hi All,
I am quite impressed with the new traveling time feature in Calendars, however I cannot seem to get the best out of it.
Is there a way to reset the start position for the calculations, I am thinking about the following senario;
Three appointments in the same day Appointment one calculates OK but appointment two calculates the start from the office and not the location of appointment one. Same thing happens with appointment three.
What I want to do is set the first appointment, calculate travelling time, set the second and calculate the traveling time from appointment one and then the same with appointment three.
The only way I have found to do this is to jump back and forward between calendar and maps and manually calculate like I used to do before this update.
Thanks in advance for any replies.sberman Southern California
This solved my questionRe: Calendar Travel Time Starting from Work when I want to Start from Home Oct 23, 2013 8:43 PM (in response to theglenlivet12)
From Calendar's help:
To set your starting location, Calendar first looks for your location in any events that are up to three hours before this event. If Calendar doesn’t find a location, it uses your work address during work hours and your home address during other hours. (Your work hours are set in Calendar preferences using the “Day starts at” and “Day ends at” menus.) If your card in Contacts doesn’t have your addresses, Calendar uses your computer’s current location. -
How do i get the curser to be in the txt box i want it to be in the beginning...
also is there a way i can chose which txt box it goes to when i hit tab and i hate it when
i hit tab and it goes to the bottom play and pause buttons... can i stop that? thanks.. Im newHi there
For the mouse, you may only adjust the starting position on the first slide where it appears. Every slide after that uses the stop position of the slide before as the start position for that slide. If you need to adjust it, duplicate the slide and remove all objects except the mouse. Change the mouse to the new desired starting point and adjust the mouse and the slide so the play time is super brief. Perhaps .1 seconds.
As for the tabbing, you may need to insert a Click Box that doesn't do anything if it is clicked. This would then receive the tab focus and keep it from the playback controls. Or, you could visit fellow Adobe Community Expert Paul Dewhurst's site linked below and download a gizmo that will remove the highlight.
http://www.RaisingAimee.co.uk
If you like what Paul has to offer, drop some change in his tip jar and he will open the door to all his magickal goodies!
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks -
Specify Starting Position in Sender FCC
Hi Experts Team,
I wish to specify the starting position of field in sender FCC.
can i????
regards,
kandaHi,
I think positions we can't identify with FCC statements. fieldfixedlengths itself system will identify automatically. If column have any specific character indication we can do easily. Check it according to your requirement. -
hi all.
i have a resultset of a sql query. then i wanna count the number of rows by doing a while loop:
while(rs.next())
count++;
then i wana do the same again, but it does not work anymore. i guess i have to set the pointer to its starting position, but i tried beforeFirst(), first(), absolute() and it didnt work. what method do i have to use for this?
thanks! :)
j0shUse the getType method to determine if your ResultSet is of type TYPE_FORWARD_ONLY. If it is
then you cannot reset the cursor. You may be able to obtain a result set that allows reseting the cursor by
passing the appropriate arguments to the createStatement method of your Connection. Whether your
will get one or not depends on the JDBC driver you are using and whether it supports them.
matfud -
After I enable the "Start the following program at logon" on my User account windows 2003 Server R2 cause my remote printer won't redirected when the Remote User is logon to the Server, I don't know why? I checked the Terminal Services Configuration already
and everything is fine.
And for you information, If I disable the "Start the following program at logon", the printer is redirected again, did I miss something in here?
Thanks
dkirwanHi,
I suspect that this application conflicts with Terminal printer redirection, whether all applications using "Start the following program at logon" option have this
issue or not. You may try another application to see if the issue is gone.
If your client PC is Windows XP, you may need install the Remote Desktop Connection 7.
http://support.microsoft.com/kb/969084/en-us
Technology changes life…… -
Across then Down with Start position
Hello All,
I am trying to print a label in a single page using multi-column (Two Columns) and Across Then Down option of Crystal. The result in my report looks like
1 2
3 4
But I have a parameter set ?startposition which takes input and guides report to print its starting position from that point. Lets say for the above data if i input 2 then data should print like
1
2 3
4
similarly if the ?startpositin value is 3 then output should be
(first Line is empty)
1 2
3 4
Please let me know if anybody can help on this.hi Ravi,
have a look at the attached report. extract the contents and change the .txt extension to .rpt.
this is not a report that was designed as a Label report, but is a multi-column report. see the section expert for the Details section if you're not familiar with multi-column reports. note in the Layout tab the options used.
also note that there are 3 groups in the report to make this happen. each of the group headers are conditionally suppressed based on the parameter. the groups are 'fake groups' and not based on any database fields. this is also important. the fake group formula is whilereadingrecords; ''
i hope this helps,
jamie -
When we Start the DRM DRM Process Manager failed to start with following error
[Process ID: 3948, Thread ID: 1, Process Manager]
Error loading the NetJNIBridge host process on machine: EU9SC1WNW001
System.Exception: Error loading the NetJNIBridge host process on machine: EU9SC1WNW001 ---> Oracle.Drm.Exceptions.ResourcedException`1[Oracle.Drm.Messages.MsgsProcessManager]: DRM-61028: The following unexpected error occurred communicating with URL 'EU9SC1WNW001': DRM-61023: Timeout starting the following process: NetJNIBridge. DRM Process ID: b3e602fa-f6c1-abcc-4af7-c0a99b51b235
at Oracle.Drm.ProcessManager.Program.ServiceMethod(String machineName, UInt16 port, Action`1 action)
at Oracle.Drm.ProcessManager.Program.StartNonEngineProcesses()
After 11.1.2.3 DRM upgradeOS:linux
i am getting error in installing OPMN manually
when trying to installing OPMN manually getting error i.e,
opmnctl: starting opmn and all managed processes...
opmnctl: opmn start failed
when checked opmn/logs:
opmn.log is empty
ons.log showing error ie:
13/06/17 19:22:45 [4] ONS server initiated
13/06/17 19:22:45 [2] 10.209.178.16:6200 - thread create failed
ipm.log shoeing error i.e:
13/06/18 11:58:04 [4] OPMN server ready. Request handling enabled.
13/06/18 11:58:16 [4] PM state directory exists: /u02/app/orapp/product/10.1.2/opmn/logs/states
13/06/18 11:58:16 [4] PM state file does not exist: /u02/app/orapp/product/10.1. 2/opmn/logs/states/.opmndat
any idea why it is showing error?? -
I'm working on a project where the content is information,
screen capture, more info, another capture etc.
The problem I'm having is the mouse is starting on the 2nd
capture where it finished on the first capture.
Is there any way of breaking the mouse chain, so that it
starts again in the centre?Hi there trinitybay9
Yep. Just duplicate the slide where the mouse stopped just
before you wish to reposition it. Remove all objects but the mouse.
Place the mouse at the new desired starting point. Now adjust the
timing of both the mouse and the slide for .1 seconds.
The net result should be that the mouse pops to the new start
position so quickly the user doesn't notice it.
Cheers... Rick -
Setting project start position
Hi - newbie question here: how do i set the project start position? At the moment I have a 'count in' which I would like to keep, but for the purposes of working with the rest of the project i would like to make what is now the second bar to show as the first bar (with previous bars as "minus" numbers. Any suggestions? It is possible?
ThanksDouglas Suiter wrote:
Hi - newbie question here: how do i set the project start position?
On the Bar Ruler click and drag the Start point to the desired position,
!http://img.skitch.com/20100213-xyre31a8jfdg9ch335jguk874u.png!
A -
Finale motion start position (delaying)
I am experimenting with the scroll motion. I'm wondering is there a way to put a delay on the final motion or specify the key frame where the finale motion is to start? I am trying to have an image broken up in a puzzle to come together from all over the screen then stay together a while before "falling up". I can think of a way around it duplicating all the components and have 2 sets and use the opacity to switch hide the original set and bring the duplicate one but just seems like it would be much easier if there was a way to control the start position of the finale motion.
The only way to achieve this would be to have two versions and have them swap. at the trigger point, like you said. Other than that, you would need to create custom code.
-
HT5093 How do I manually set the start position.
The 3d program do not support it (Google Sketchup Free).
Can I open the dae file in another program and set the start position there?1) How do I in iBooks Author set the camera position manually.
The documentation says: "be sure to add a camera to your object. This will be used for the default view in your iBooks Author book."
default indicate that there are other options in the iBooks Author program.
If this is not the case:
2) What is the prefered program for createing 3d model with a start camera position.
2a) More specific how do I do that in the program.
Note that is is unlikely that any other forum can answer question 2, since this is compatibility specific issue between a 3d program and iBooks Author. -
Start position of slider-object (pan)
Hi,
I'm using a horizontal box (with 1000 px, height 100 px) where I pasted an object in and made it slideable with Overlay Creator using 'pan'. The object inside it has the same height but hase a bigger width so it acts like a slider-bar a little bit like a volume-slider (without this function ofcourse).
My question: is there a way to give it a starting position so it starts at say the middle of this container box? If in a volume slider this would be at 50% volume - just as an example. I tried aligning it, can't find the right solution.
Hope someone has a idea about it! Thanks in advance.
Kind regards, G.Ah, it's a good question, but the answer is no. It seems all images in a pan are automatically aligned to the top left hand corner.
Which is also the reason we can't have a pullout tab sitting on the left hand side of a page.
Maybe one day! -
Start position of scroll effect
Just a simple scroll up only on a rectangle, preview in browser and the start position has moved? Thought it was me but today I have gotten it to preview in the start position sometimes. Have tried everything blank page, new site etc. Is it a bug or me?
Key positions in AE and Edge work differently to Muse, you have to almost think in reverse with Muse. The position that you place the image is where you want it to be on the page when the key position is at the top of the browser. If you have any value set for initial motion Muse offsets the final position to begin, based on the distance of the key position and the speed value of the scroll.
-
Safari won't trust ANY website certificate, even after I tell it to (click Always trust this site option), and i can't connect to the APP store even though I'm clearly connected to the internet. This all started immediately following a RAM upgrade. Please advise.
Take each of the following steps that you haven't already tried. If the problem isn't solved, ask for further instructions.
1. Are the current date (including the year) and time shown on your system clock? If not, correct them and test.
2. Disable any third-party firewall, "security" software, or network filter.
3. In some versions of OS X, Parental Controls has a bug that prevents loading of secure websites. Turn it off.
4. The process by which OS X checks the validity of root SSL certificates doesn't work behind the authenticating SOCKS proxies used on some enterprise networks. If applicable, contact your network administrator. The proxy server may need to have its settings changed.
Maybe you are looking for
-
I recently received a new iPhone 5 to replace my old broken iPhone 5 I backed up my old broken iPhone 5 into iCloud I checked to see it was all there, when it came to set up my new iPhone 5 my new iPhone 5 wasn't updated to the latest version my
-
HP Scanjet 4890 and MBP - HP software crashes
I bought this Scanjet via Applestore. It was easy to set up. It will happily scan a small photo and it will also work, using the HP copy utility, as a photocopier with my HP printer via the MBP. However, if I try to scan a whole A4 page of handwritin
-
Amount posted to difference account while inventory adjustement
Hello The scenario where we are facing the issue is, 1. Posting period for previous month was closed and accounts for the last month was closed. 2. To correct the wrong PO, we opened previous period, added inventory my physical inventroy method for G
-
hello, i'm working on a small school project, i'm experimenting a little with listeners and I wanted to know if it was possible to exit a listener? as soon as i start draging, i want to execute the commando "jPanel1.add(com)" and right after that i w
-
Adobe Application Manger Corrupted
I am attempting to install Photoshop CC from my Team account. When I hit the download button I get the following error: "Adobe Application Manager is corrupted and must be reinstalled. Please contact Customer Service." Help.