Start Recording at a Specific Place

Hello all, my first time in these forums. Thanks for having me.
I've never really tried to use GB to its fullest potential - this is my first time really getting nit picky.
I've recorded about 20 measures of vocals or so and I want to rerecord the last 3 measures. I want to tell GB to start recording at X measure and simply continue to record.
After looking thru the help menu, I found the Cycle Region, which allows me to start recording at a specific spot, but, it also has an "end" to its cycle. Not a problem, I made the cycle about 100 measures.
*Here's the thing that's aggravating me however*, if I use the Cycle Region and I click the record button I can only listen to 2 measures of my previous recording. I want to listen to about 10 so I can get back in the groove!
Anybody know of a better way to deal with this?
Thanks again,
smokingmole

@HangTime-
Actually, that's how I had been solving the problem for the last few years that I've been a basic GB user. I was hoping there was another way.
But alas, back to the basics
Thanks!

Similar Messages

  • Is it possible to pre-set Logic Express to start recording at a specific time, in my absence?

    Is it possible to pre-set Logic Express to start recording at a specifi time, in my absence?
    I am using a new MacBook Pro with solid state drive.

    As far as I know Logic is not able to timer record.  But Audacity can and it's a free program:
    http://audacity.sourceforge.net/download/features-1.3-k.php

  • Diaabling the window that pops up when you start recording

    I finally got my friend to try Logic and he loves it, but he complains about the window that pops up when you start recording audio. Its not a problem for me but he swears it annoys him so I told him I would find out if it can be removed. So does anyone know if that window can be disabled?

    czarthp wrote:
    I finally got my friend to try Logic and he loves it, but he complains about the window that pops up when you start recording audio. Its not a problem for me but he swears it annoys him so I told him I would find out if it can be removed. So does anyone know if that window can be disabled?
    I don't think you can remove it. I agree, that would be a nice option to have.
    I think though, that if he were to move it over to a corner of the screen, Logic will remember this placement, and whenever he goes into record, it should open up where he left it, hopefully out of the way enough not to bother him so much...

  • IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

  • On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

    On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on?  Thank you.  Ed

    Welcome to the Apple family!!!! 
    How can I cause the VO cursor(box) show-up/start?
    Press Control-Option and F5.   The F5 key is located on the top row of keys 6th key over.  This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
    How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
    How to read a website with VoiceOver
    Step 1:  Go to the Website
    A quick keyboard shortcut is Command-L.  This will jump you up to the address bar.  Start typing where you want to go.  i.e "www.thewebsite.com"
    Step 2:  Working with Webpage
    VoiceOver will automatically start reading the website.  You can pause the speech by hitting the 'Control Button'. 
    If VoiceOver does not being reading the webpage, then you might have to "Interact" with it.  If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
    Use Control-Option-Right Arrow to move throught the website.  This will speak "EVERYTHING" on the page.
    Most website that I've found have their articles labeled as 'Heading'.  You can jump from heading to heading, by pressing Control-Option-Shift-H.
    If you'd like an itemized alphabetical listing of the site, press Control-Option-I 
    Press Control-Option-Space on the link or article you want to view.
    Step 3.  Reading from Top to Bottom
    Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title. 
    After finding the title, press Control-Option-A will start reading from the title on. 
    Note:  If there are any other items (ads, pictures, etc) it will read those too. 
    Tip:  You might be able to activate a feature called the 'Reader'.  The Reader isolates the article and elimanates the ads  The keyboard command is Shift-Command-R.  You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'. 
    I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
    You can find this information under the 'Apple menu' in the Menu Bar.  To access the Menu Bar, press Control-Option-M. 
    Go to Apple Menu > About This Mac.  This will open up another window.  Use Control-Option-Right Arrow until you hear 'Version'.  If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks. 
    Recommanded Articles. 
    AppleVis- Commonly used Keyboard Commands
    Chapter 2: Learning VoiceOver Basics
    Chapter 6: Browsing the internet
    Apple Accessibility Resource Page
    The  'Commands Help' Voiceover Menu. Control-Option-H-H.  (hit H twice)  is my best friend.  It's a searchable VoiceOver Menu with most of the VoiceOver command.  Example:  You are looking for the 'Read Current Paragraph' keyboard command.   Press Control-Option-H-H and then type Paragraph.  It will then bring up all the commands with the word paragraph.  I believe there are three.   
    As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
    VoiceOver standard gestures
    If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
    NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
    General
    Enable the Trackpad Commander and VoiceOver gestures
    VO-Two-finger rotate clockwise
    Disable the Trackpad Commander and VoiceOver gestures
    VO-Two-finger rotate counterclockwise
    Turn the screen curtain on or off
    Three-finger triple-tap
    Mute or unmute VoiceOver
    Three-finger double-tap
    Navigation
    Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
    Hold down the Shift key and drag a finger horizontally or vertically
    Move the VoiceOver cursor to the next item
    Flick right
    Move the VoiceOver cursor to the previous item
    Flick left
    Move content or the scroll bar (depending on the Trackpad Commander setting)
    Three-finger flick in any direction
    Go to the Dock
    This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
    Two-finger double-tap near the bottom of the trackpad
    Go to the menu bar
    Two-finger double-tap near the top of the trackpad
    Open the Application Chooser
    Two-finger double-tap on the left side of the trackpad
    Open the Window Chooser
    Two-finger double-tap on the right side of the trackpad
    Jump to another area of the current application
    Press Control while touching a finger on the trackpad
    Interaction
    Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
    Touch (includes tap or dragging)
    Select an item
    Double-tap anywhere on the trackpad
    You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
    Start interacting with the item in the VoiceOver cursor
    Two-finger flick right
    Stop interacting with the item in the VoiceOver cursor
    Two-finger flick left
    Scroll one page up or down
    Three-finger flick up or down
    Escape (close a menu without making a selection)
    Two-finger scrub back and forth
    Increase or decrease the value of a slider, splitter, stepper, or other control
    Flick up (increase) or flick down (decrease)
    Text
    Read the current page, starting at the top
    Two-finger flick up
    Read from the VoiceOver cursor to the end of the current page
    Two-finger flick down
    Pause or resume speaking
    Two-finger tap
    Describe what’s in the VoiceOver cursor
    Three-finger tap
    Change how VoiceOver reads text (by word, line, sentence, or paragraph)
    Press the Command key while touching a finger on the trackpad
    Rotor
    Change the rotor settings
    Two-finger rotate
    Move to the previous item based on the rotor setting
    Flick up
    Move to the next item based on the rotor setting
    Flick down
    To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
    Assigning VoiceOver commands to gestures
    If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
    Learning about keys, keyboard shortcuts, and gestures
    Sorry lots of information.  Enjoy.  You

  • Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How can i start Terminal in a specific folder

    how can i start Terminal in a specific folder

    From the menu bar, select
     ▹ System Preferences... ▹ Keyboard ▹ Keyboard Shortcuts ▹ Services ▹ New Terminal at Folder: On
    Right-click or control-click a folder in the Finder and select that item from the contextual menu.

  • Start recording video at a set time of day and off at a set time of day, and or can start rec video when motion detected, till no motion detected for a set period

    is there an app for iphone which can be set to start recording video at a set time of day and off at a set time of day, and or can start rec video when motion detected, till no motion detected for a set period. basically someone is vandalising my vehicle and i really really want to catch the mongrel
    thanks for any suggestions

    Nope.

  • Unable to start recording - occasional issue

    We're having an intermittent issue that so far we have been unable to narrow down the exact cause so that we can fix the issue. Once in a while, when someone tries to start recording a call that an avgent is on, they will get a message stating "Unable to start recording for agent <agent's name>.". Initially we found that restarting the computer that the agent is sitting at would resolve the issue and they could be recorded again. That was not a viable long term solution however, and further troubleshooting has found that the computer itself doesn't need to be restarted to fix the issue. We found that just restarting the Cisco Agent Desktop software fixes the issue and allows that agent to be recorded again.
    We have checked settings in CM for the agents and phones that this has happened to previously but everything has been correct there. The only common connection that we have found so far has been that the issue seems to happen after the agent has transferred a call or received a transferred call.
    This isn't a widespread issue and only happens once in a while(maybe once or twice a week), and so far it isn't always the same person(agent or the person doing the recording) or the same computer. We're trying to gather more data, but due to the intermittentcy of this issue there isn't much at this point to go on.
    Anyone have any suggestions/ideas?

    Hi,
    Sorry for the delayed reply. Reporting of this issue to us from the users has been sporadic. Our UCCX version is 8.
    The issue isn't happening to any one agent but the ICD extension isn't shared with any other numbers that we can see, and checking the Route Plan Report doesn't show any lines that are shared with other numbers.
    Is there possibly a timeout setting of some kind that could be affecting recording when a call is transferred?

  • I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

    I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

    QuickTime version 10 can only record the entire screen.
    10.1, 10.2 and 10.3 offer part of the screen recording.

  • How do I link to a specific place on a "different" page?

    I understand how a Named Anchor works on a given page. How do I click a link on one page, and go to a specific place on another page? Can that be done?
    Thanks!

    Same page anchor:
    <a href ="#anchoronthispage">
    Different page anchor:
    <a href="anotherpage.html#anotheranchor">

  • Putting a Jlabel in a specific place in JPanel

    Hi,
    I have created a JApplet where I fill it up with some JPanels. Inside a JPanel i want to put some Jlabels on a specific place. However, it doesn't work.
    Whenever i try to put a setLayout(null), the application doesn't show my modifications. If don't use this command, the modification are loaded.
    I don't know what happes with this layout. Is it a problem of layout or a problem of JPanel references?
              canvas = new AVLTreeAnimation();
              //canvas.setLayout(null);
              JLabel label = new JLabel("trestadf");
              label.setLocation(10, 10);          
              canvas.add(label);
              canvas.setBorder(new TitledBorder(null,"AVL-Tree Animation",
                        TitledBorder.LEFT, TitledBorder.TOP));
              canvas.repaint();          
              return canvas;thanks for your help

    man, this same problem's come up a lot this week.
    If you set the layout to null, you have to set the size and the location, not just the location. All components have a size of 0 x 0 initially.

  • I am wanting to add picture and designs to my form how do I place it in a specific place on my form?

    I am wanting to add picture and designs to my form how do I place it in a specific place on my form?

    Currently we only support one field/item on a line. We are working on adding a feature that allows you to put multiple fields/items on a single line. We hope to have that out in a few months.
    Randy

  • External hyperlink to specific place in a PDF file?

    Is it possible to have an external hyperlink on a webpage to a specific place in a PDF file? If so, how is it done? I would be creating the PDF file in InDesign. Thanks

    Great...many thanks
    Mark

  • I want to link to a specific place within a document from Captivate4

    Hi all,
    I want to link to a specific place within a document from Captivate4.
    I have no trouble linking to the beginning of a document; however I want to be able to link to a specific chapter/area of a document I am creating. My plan is that as people progress through the e-learning they can link back to the electronic manual I am creating from where they left off.
    I have a workaround of creating separate documents and linking to them, but this is time consuming and messy.
    Does anyone have any ideas of what I can do; I have looked around the forums and, unless I am blind, can't find anything like I am looking for.
    Cheers
    thedarf

    Hi there
    What type of document are you trying to link to? PDF? Word Doc?
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

Maybe you are looking for