Start recording video AFTER touch block has been activated - is it possible?

So I'm in the camera app, I've enabled touch block. But i can only take pictures, either with the hardware camera button or the volume rockers. How do i engage the video recording function AFTER touch block has been activated?

That seems strange since i can take pictures after having enabled touch block. As it is now i have to edit out the first seconds if I want to film underwater. Very unnecessary

Similar Messages

HT3986 How do I start up Mac after the Windows has been installed.

How do I start up Mac after the Windows has been installed? And after I installed the Windows, my Audio is gone. How can I get it back?

Welcome to the Apple Support Communities
1. To boot into Mac OS X, press X key while your computer is starting.
2. Install Boot Camp drivers

Write off FICA documents with no segments after New GL has been activated

Hi Gurus,
The scenario we are facing is as follows"
The client had already implemented FICA as part of its legacy, but SAP FICO was not implemented. As part of the new framework, we are implementing SAP FICO as well, while at the same time New GL is now being activated.
All ancillary configurations have been maintained for deriving profit center/segment information on main and sub transactions through use of CO Account assignment key.
Issue:
The issue we are facing now is that, while writing off (FP04) any FICA document which has a profit center/segment information, we are able to write it off. But any FICA document which does not have segment information, we are getting the error "Segment Missing"
Probable Solutions:
1) Tried maintaining the value as "2" (Account Assignment) at the following node:
FICAIMG-->Business transactions--> Define specifications for Write-offs
This solution did not help us in writing off the FICA document
2)Custom logic in event 5030?
Custom logic can be maintained in the FM at event 5030, where we should be able to derive the profit center/segment info. based on the business area
Please let me know if any other options can be tried and also if the custom logic at event 5030 should help us resolve the write off issue?

Hi, I have the same laptop and had the same problem.
I have solved it by adding the following arguments to the kernel command line:
acpi_osi=Linux acpi_backlight=vendor
Note: acpi_osi only did the trick, but then the backlight service fails. acpi_backlight fixes the service.

Change parameter instance_name after standby database has been activated

Hello ,
our primary database is configured as follows:
SQL> show parameter db_name;
NAME                                 TYPE        VALUE
db_name                              string      prod01
SQL> show parameter instance_name
NAME                                 TYPE        VALUE
instance_name                        string      prod01
the corresponding standby database is configured as:
SQL> show parameter db_name;
NAME                                 TYPE        VALUE
db_name                              string      prod01
SQL> show parameter instance_name
NAME                                 TYPE        VALUE
instance_name                        string      stbyprod01
Now the standby database shall be activated. Afterwards I want to change the parameter INSTANCE_NAME from stbyprod01 to prod01.
The question now is: what needs to be done to change the parameter INSTANCE_NAME? As a matter of fact the standby database will
already be activated and be treated and handled as a standalone database. The former primary database will not be used anymore.
I would proceed as follows:
SQL> create pfile='initprod01.ora' from spfile;
SQL> shutdown immediate;
oracle #> edit the pfile and change the parameter INSTANCE_NAME from stbyprod01 to prod01
SQL> startup;
SQL> create spfile='spfileprod01.ora' from pfile;
SQL> shutdown immediate;
SQL> startup;
That should be all - from my point of view (I know that LISTENER.ORA and TNSNAMES.ORA should be modified, too).
If anybody has already experiences with changing the INSTANCE_NAME parameter but sees some further configurations: please just let me know!
Rgds
Jan

Hi ,
only "alter system set instance_name='TEST' scope=spfile" will work since the parameter INSTANCE_NAME is static. After restarting the database/instance the statement "show parameter instance_name" will show the new instance name.
But when selecting the view V$INSTANCE the value of the column INSTANCE_NAME has still the old value. Any idea why this value remains unchanged in the view V$INSTANCE?
Rgds
Jan

Is it standard behavior for VL10A/table VEPVG to show two records when a Sales Document has been blocked?

Hi Experts,
Is it standard behavior for VL10A to show two records when a Sales Document has been blocked? Their only difference is the field Delivery Block. In VL10A, the first record has a delivery block of BLANK, the second has 99.
Here's how to replicate the issue.
Create sales order.
When you check VL10A, the Sales document is there.
Change sales order field (RSD) in VA02, Save.
When you check VL10A, there are now two records, one has a blank delivery block, the other has 99.
The expected result here is that after changing in VA02, there will be only 1 record in VL10A and it should have delivery block of 99.
Assumptions:
1. We know that VL10A retrieves its records from VEPVG. The problem is, in VEPVG, delivery block is a key field. So I think that during VA02, when the delivery block of 99 is assigned, this creates a record in VEPVG instead of updating the existing one. Is this standard behavior, and are my assumptions correct?
Thanks in advanced experts. Appreciate your prompt response,
Jack

Hello Jack,
This is the standard behavior. When I check in our system, I too can see two entries but with different good issue date and delivery date and the block is specific to good issue date, delivery date.
So there is no problem in it. try to give the delivery date which includes two table entries delivery date and execute the transaction VL10A.
Regards,
TP

After my Macbook has been on for a little, the light goes out on the screen. When I start to close the screen the light comes back on. I can hold it in this position and keep typing/reading indefinitely.any idea what is the problem?

After my Macbook has been in use for a little while, the light goes off on the screen as if the computer is off. Then, as I start to close the screen, it comes back on fully. If I push it back open it cuts off again. So, I just leave it part way open and turn the laptop at an angle so that I can continue to see the screen & type. It acts like there is a short. Any idea what the problem is?

It does sound like you might have a faulty video connection. See if you can make a Genius Bar appointment at your local Apple Store.

7.1.1 After the update has been deleted TOUCH ID feature. disappeared

7.1.1 After the update has been deleted TOUCH ID feature. disappeared

Have you checked to see if the music is in iTunes on the computer? if so dose the music play on the computer? in itunes, if you click on the iphone from the list on the left, and then click on the music tab on the right, is sync music checked? if so are you syncing all music, or a specific play list(s) of music? if it's syncing only specific play lists, is there any music in that play list?

After my computer has been asleep and I touch my trackpad, it wakes enough to show my icon but not enough to acknowledge my keyboard or trackpad so I can type a password. It seems the only way to make it work it to turn it off the back button.

After my computer has been asleep and I touch my trackpad, it wakes enough to show my icon but not enough to acknowledge my keyboard or trackpad so I can type a password. It seems the only way to make it work it to turn it off the back button.

The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
Now- "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
Message was edited by: Apple I0S Help Team

Is there a way to see what font was used originally, after the type has been converted to outlines?

Hi all, I would really like to know if there is any way to find out what font was used originally in an Illustrator document, after the type has been converted to outlines? The reason for this is I need to update some wording in a couple of old logos I had made and I have NO idea what font I had used...for the life of me I just cannot remember. Because this was so urgent for one of my projects I had to do a search online via "WhatTheFont" to see what font it could be (which I then didn't seem to have in my library!), and repurchase it. I am 99% sure I HAVE the font - or something VERY close - but under a different name.
Normally I keep a much better record of fonts used but there have been times occasionally in the past when I have done something in a hurry and changed the type to outlines without keeping the original, or keeping detailed notes at least. The fact that I did NOT keep notes on a few projects I have done in the past has made me want to kick myself because now I need to revisit one of those again..grrr:)
Can anyone offer any advice? I appreciate your help as always:)
best,
Christine

Christine,
You can also ask in the Typography forum,
http://forums.adobe.com/community/design_development/typography?view=discussions&start=0
The guy running whatfontis is a regular poster there.
And apart from
http://www.whatfontis.com/
there are
http://www.identifont.com/
http://new.myfonts.com/WhatTheFont/
and especially for script,
http://www.bowfinprintworks.com/ScriptIDGuide.html

Creating a Materialized View Log After the Data has been instered

Hi,
I am trying to create a method of replication from Oracle to MySQL using the Materialized View Log table.
This has been done before and works quite well, the only problem is that I am trying to impliment the log after the table has been created and populated and wish to push all the existing data through the log file...
Does anyone know if it is possible to refresh the Materialized View Log and not a Materialized View.
The way the replication is intended to work is:
Oracle> Data inserted into table
Oracle> writes the vector data to the MVL
Script> Monitors the MVL and can see the changes being made to the Oracle Table
Script> Updates MySQL with the data and removes the rows from the MVL
MySQL is then used with other unix systems
Currently we export the data from the table using Triggers and a cronjob running every x minute to check for changes in the TriggerTables
Many thanks for your time on this, I have been checking for almost a whole working day and not found the answer to this problem.

Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
Many thanks for your help.

Powershot SX510 HS automatically stops recording video after 10 - 15 minutes into the recording.

Powershot SX510 HS automatically stops recording video after 10 - 15 minutes on continuous recording. Is there a way to turn this off? I would like to record videos until either I press the stop recording button, or the battery gets low. I have turned off all the power saving setting, at least I think I have.
Solved!
Go to Solution.

The camera has some recording limitations as all the Canon models do. Below is how you can extend your recording times to a max of about 1 hour but there is a 4BG limit regardless so once it hits 4GB the recording stops and has to be restarted.
Also the memory card needs to be at least a Class 6 rating or the recording will stop sooner regardless of the clip size.
This is from page 161 of your manual

[SOLVED]start a service *AFTER another one has executed completely

How can i make "test.service" to start after "customstartup.service" has been fully executed?
As you can see, even if test.service Requires customstartup and customstartup.service is "oneshot", test.service is started while customstartup is still starting!
The following is in a linux container:
[root@archiso ~]# cat /etc/systemd/system/customstartup.service
[Unit]
Description=customstartup
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/bin/sleep 100
[Install]
WantedBy=multi-user.target
[root@archiso ~]# cat /etc/systemd/system/test.service
[Unit]
Description=test
Requires=customstartup.service
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/bin/sh -c "echo hi all"
[Install]
WantedBy=multi-user.target
# systemctl status customstartup
● customstartup.service - customstartup
Loaded: loaded (/etc/systemd/system/customstartup.service; enabled)
Active: activating (start) since gio 2014-07-03 16:30:10 CEST; 12s ago
Main PID: 32 (sleep)
CGroup: /machine.slice/machine-root\x2dimage.scope/system.slice/customstartup.service
└─32 /usr/bin/sleep 100
[root@archiso ~]# systemctl status test
● test.service - test
Loaded: loaded (/etc/systemd/system/test.service; enabled)
Active: active (exited) since gio 2014-07-03 16:30:10 CEST; 23s ago
Process: 26 ExecStart=/usr/bin/sh -c echo hi all (code=exited, status=0/SUCCESS)
Main PID: 26 (code=exited, status=0/SUCCESS)
CGroup: /machine.slice/machine-root\x2dimage.scope/system.slice/test.service
lug 03 16:30:10 archiso sh[26]: hi all
lug 03 16:30:10 archiso systemd[1]: Started test.
Any hints? Is there a way to enforce the wait?
Thanks.
Last edited by kokoko3k (2014-07-03 15:59:37)

From systemd.unit:
Requires=
Configures requirement dependencies on other units. If this unit gets activated, the
units listed here will be activated as well. If one of the other units gets
deactivated or its activation fails, this unit will be deactivated. This option may be
specified more than once or multiple space-separated units may be specified in one
option in which case requirement dependencies for all listed names will be created.
Note that requirement dependencies do not influence the order in which services are
started or stopped. This has to be configured independently with the After= or Before=
options. If a unit foo.service requires a unit bar.service as configured with
Requires= and no ordering is configured with After= or Before=, then both units will
be started simultaneously and without any delay between them if foo.service is
activated. Often it is a better choice to use Wants= instead of Requires= in order to
achieve a system that is more robust when dealing with failing services.

Our records indicate that this product has been replaced ?!

I bought my iPhone 4 couple of month ago and after selling my mac to get a new MacBook I wanted to sync it with my itunes... issue, itunes seams to be showing that no APP will be present on my phone once I sync it. So I wanted to check the support page... What a surprised, when I enter my serial number I got this message:
"Our records indicate that this product has been replaced. Please provide your product's replacement serial number to find its support and warranty coverage information. For more information, please contact us. "
What the H !? I bought the phone, brand new at an apple store probably 3 month ago or so.
Any Idea ? How and who should I contact ?

First, in regards to iTunes content an iPhone can be synced with an iTunes library on a single computer only, and photos can be transferred from a single computer only. When transferring iTunes content and photos from another computer, all iTunes content and photos transferred from a different computer will be erased from the iPhone first. An exception is if you transfer your iTunes library from the old computer to the new or different computer following the instructions included with this link.
http://support.apple.com/kb/HT1751
All iTunes content on your iPhone - all music, movies, tv shows, and 3rd party apps should be in your iTunes library on your computer. Did you transfer your iTunes library from your old Mac to your new Mac and if so, how was this done?
If the 3rd party apps on your iPhone are not in your iTunes library on your computer which means you didn't have Sync Apps selected under the Apps tab for your iPhone sync preferences with iTunes on your old Mac, first you need to authorize your new Mac with your iTunes account with iTunes if you haven't already done so. With your iPhone connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone. This will transfer all iTunes content from your iPhone that was purchased/downloaded from the iTunes store that is not currently available in your iTunes library on your new Mac. After confirming all apps on your iPhone are in your iTunes library on your new Mac, select Sync Apps under the Apps tab and make sure all apps currently installed on your iPhone are selected below.
Regarding the other, you can call AppleCare.

I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open.

I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

How do I add Chinese local after Solaris OS has been installed

How do I add Chinese local after Solaris OS has been installed. right now on my
/usr/lib/localedef/src I only have iso_8859_1
Thank you

Welcome to the Apple Support Communities
1. To boot into Mac OS X, press X key while your computer is starting.
2. Install Boot Camp drivers

Start recording video AFTER touch block has been activated - is it possible?

Similar Messages

Maybe you are looking for