Start routine for Update Rules

I need to write a start routine for the update rules for an DSO with main idea as follows:
I must compare the record that comes from the infopackage with the record that's already in my DSO. If the X date for the same 0PM_ORDER is the same as one in my DSO - do nothing
If the X date is previous to the X date in my DSO for the same 0PM_ORDER - the new record must be created and at the same time all the records with subsequent(later) X dates for this 0PM_ORDER must be deleted.
If the X date is later than the X date in my DSO for the same 0PM_ORDER - the new record must be created.

Hi,
Find the below code.
DATA: BEGIN OF ITAB1,
ZDATE TYPE /BIC/DATE
END OF ITAB1.
SELECT zdate FROM /BI0/QEMPLOYEE INTO corresponding
fields
of ITAB1 where employee = SOURCE_FIELDS-EMPLOYEE.
IF ITAB1-ZDATE COMMUNICATE_STRUCT-DATE
RESULT = ITAB1-CLM_IPAA.
ENDIF.
ENDSELECT.
There will be an table for each DSO if you go for an manage DSO you will get three table i.e New,Active and Change Log take Active tables date field and compare with the communication structure that comes to routine.
The above example is just an example table will be different from DSO to DSO.
Let me know your thoghts.
Regards,
Shivu.

Similar Messages

Deleting rows with missing values in field in start routine of update rule

Hello experts,
how can I delet rows with missing values in a specific field in the start routine of update rules?
I think ABAP code should look something like this:
delete ... from DATA_PACKAGE where Z_NO = ''.
thanks in advance for any suggestions!
hiza

Write:
delete data_package where field = value.
Hope it helps.
Regards

Diff between the Start routine and Update rules?

Hi Gurus
Diff between the Start routine and Update rules?
Thanks in advance
Raj

Hi,
Routines are like conditions or business rules that could be applied to filter the data while entering the BW system or could be used to apply certain conditions on the info objects itself.Update rule level you manipulate your data and write your start routine.
There are 4 types of routines
1. Start routine- Could be used at two levels (transfer rule level and the Update rule level)
This Start routine written at the transfer rule level helps filter the necessary data coming from the source system.
For Example: If you decide to extract data that contain only quantity greater than 500 , then you could specify the Start rouitne to achieve this.
The Start routine at the Update rule level provides similar functionality but at this point it helps direct specific data to
different data targets. For Example: If there 3 data targets being fed from the Infosource, you may want to apply some condition to each data target, like send year 2000 data ti Data target1, 2001 to data target 2 and so on. This can be achieved by using Start routine at the Update rule level
2. Transfer Routine: This feature is available at the transfer rule levels
While performing the transfer rules operation, there are 4 features available to the developers to create business rules on top pf the Infoobjects.
1. You could do a one to one mappping of the Infoobject
2. Provide a constant value
3. Include a formula
4. Write an ABAP routine.
These 4 options refers to the transfer routine
3. Update Routine:
The limitations of just having 4 options in the transfer routine is overcome at the update rule level. There are various other
sophisticated features avaialable apart from the 4 options mentioned above. These business rules could be specified pertaining to each data target.
4. Conversion Routine: It provides functionality to do Currency and unit conversion.
Regards.

Start routine and update rules

Hi,
What is accessed first:-
Start Routines or Update Rules?
What is the use of global variables in start routine?
Please reply.
Thanks.

Hi......
You have different types of Routines in BW .
1) Start Routine in Transfer Rules
2) Transfer Routine in Transfer Rules.
3)Start Routine in Update Rules
4)Update Routine in Update Rules.
The routines that you write in transfer rules are applicable to all the Data targets that get the data from that particular Infosource, when you are going to write some code in Transfer rules, you have to understand that you are going to manupilate the data that is going to get into BW .
If you are going to write in Update Rules , then that logic is going to apply only for that particular Data target .
Eg : Let suppose I have a Flat file that gets data from 3 countries, US, Canada and Mexico.
Now I have prepared the data source for the same . But I dont want to have the data of Mexico in to BW itself.
So I will write a Start routine at TR to eliminate the data of Mexico.
My Next step is I want the data of US into one ODS and Canada data in to another ODS.
For this I handle the dataflow at Start routine in Update rules, to eliminate Canada data for US ODS and Vice Versa.
Global variables in Start routine
You can have global variables, internal tables populated by the
startup routine. This data will be available to the field
routines. Create yourself a start routine, declare some
variables in the global section, and then create a field
routine. You will be able to use the globally declared objects
in the field routine
Please check below help link for routines in sap netweaver 2004s
http://help.sap.com/saphelp_sem60/helpdata/en/e3/732c42be6fde2ce10000000a1550b0/frameset.htm
How to guide "How to transformations routines".Please check the below link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dc1d9990-0201-0010-16aa-db3c4eb8b642
start routine in transfer rules
Look up to load master data
excluding
Start Routine in Transfer Rules
Sample code in Update Rule to restrict data selection?
Append Datapak - transfer start routine
Excluding Blank field in Infopackage Filter
Trans Routine ABAP help ..
transfer routine
Date key figure: Convert DATS format to DEC format
Date Conversion in Flat File
Transfer Routine ABAP
conversion exit
Date Conversion
Problem with conversion char to numc in transference rules
conversion routine..?
update routine
How to call a function in Update Rules to reverse a key figure sign
Need Sample Code for Update Rules
Date calculation
Difference between data in PSA and Data in Infocube
No RETURNCODE <> 0 allowed in update routines in transfer mode
the diffrerece between DEC and (yyyymmdd) 8 char in Time defination
Access master data in update rules
Date key figure: Convert DATS format to DEC format
start routine in update rules
Is it possible to read a third ODS in update rules between two ODS?
update rule coding while loading data from ODS to CUBE
Start Routine in Update Rules to populate additional fields from ODS
Coding in Update Rules accessing a Z-Table
Start routine
Hope this helps you..........
Regards,
Debjani.........
Edited by: Debjani Mukherjee on Oct 1, 2008 4:58 PM

Routine for Update rule in cube

Hi Friends,
I have added a field to a cube, now i need to populate the same during the data is loading from the DSO to Cube. Inupdate rule since we will get only te key figures, is it possible to access the dimensions in the routine. Please help me in giving some coadings for the routine for update rule.
Thanks
Prem

Hi,
one more suggestion..
create a end routine and update the key figures based on ur dimension values by useing resuly_package.
sample code:
[Transformation end routine|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/203eb778-461d-2c10-60b3-8a94ee91cbfc]
thnks.

Start Routine for transfer rules

Hello experts,
I want to use the SQL DISTINCT keyword to return non-duplicate results from a table in a DataSource (data base) in a the start routine for the transfer rules.
How do I address that table in the start routine of the TR?
I thought about something like that.
TABLES: mytable
DATA: itab_mytable type table of mytable
SELECT DISTINCT CUSTID, etc.
FROM mytable into table i_tab.
I am new to ABAP so I would be happy to get some suggestions!
thanx in advance
Axel

Hello Oscar,
as fa as I understood the entire data package in the transfer structure format is used as parameter (DATAPAK) for the routine.
so I want to perform a SQL statement on DATAPAK!
But it sais it can't find DATAPAK in ABAP-Dictionary as a table!
can I actually perform SQL statements on DATAPAK?
Thanx
Axel

Start Routine in Update Rule

I want to replace all '# ' values showing up in a report with space. For this I plan to write a Start Routine in the Update Rules which should scan all the data coming in into the cube and replace all null or '' with space.
What is the best way to write this routine. It should check all data in all the fields of the data load coming in.
Thanks

Hi,
     The space is shown as # in the BW Reports, to confirm check the value in the cube for this field, so
      you need to change that to some other character like X or Y or explain your end users that SAP
      designates a space as # and it will be displayed that way in the reports.
Regards,
Raj

How to debug start routines of update rules from ODS to InfoCube

Dear gurus,
I have an update rule from ODS to InfoCube. I wrote a start routine in the update rule. Now I want to debug it. I went to monitor and simulate update the data package and only got the prompt "No data exists in the corresponding PSA table". So how can I debug this start routine?
Thanks in advance.
Jin Ming

Jin,
In order to use PSA between ODS and InfoCube, you may have to use an exclusive InfoPackage and load separately. In that InfoPackage, choose the radio button to use a PSA.
I think you are currently updating the InfoCube directly without using a separate InfoPackage.
Look for an InfoSource under DataMarts (search for 8<ODS Technical name>) and create your InfoPackage there.
Good luck.

ABAP Help at start routine of Update rule

Good After Noon All,
My requirement is that cube ZAPO_C24M theres an UPDR flowing from 8ZAPO_C24M back to itself so to speak.The request is to change the data in the cube from Fiscal Year Variant Z3 to Z4.
But in start routine i have to take the existing record and reverse all of the key figures, and also change the RECORDMODE of the record to indicate it is a reversal record. This for specific Country KR and for these country the Fiscal variant is Z3. Again in the start routine, create a new record identical to the existing record that has Fiscal Year Variant Z4 instead of Z3.
So the idea is wed load from the cube and send back to the cube one record that reverses out the existing data, and another record that contains the same data but with Fiscal Variant Z4 instead of Z3.
Please Help me.
Points will be awarded for the right answer

Hi Vaishali,
In the start routine copy the DATA_PACKAGE to a local table.
Select the records where the specific country is KR.
Delete all other records.
Then read the records in loop, Keep one record same and just change the fiscal year variant.
And for the same multiply all the key figures by -1.
Transfer the content of the local table back to DATA_PACKAGE.
maintain one to one mapping in the update rule.
I am sure it will update, but you need to be sure that if you change Fiscal year variant then probably your fiscal period value should change. In that case you have to update it accordingly in the start routine.
Regards.

Help needed on start routines in update rules

Hi All,
I want to extract data from two data sources(For ex 2LIS_02_HDR, 2LIS_02_ITM).
I am using 2 first layer ODS' and one second layer ODS for consolidation.I want to write a start routine in the update rules so that the data of the MATNR(Material Number) field from 2LIS_02_ITM will be populated in the second layer ODS when the keys (EBELN) of the datasources are equal in the first layer ODS'.
Can anyone send me the code for this requirement?
Thanks in Advance,
Sanjana.

i am assuming u have a direct transformation with 2lis_02_hdr
and u want to look up on the DSO of 2lis_02_ITM to get the material.
MATNR = 0material
EBELN = 0docnum.
put this code in the start routine of the transformation of 2lis_02_HDR.
TYPES: BEGIN OF s_itm,
            material TYPE /bi0/oimaterial,
            docnum TYPE /bi0/oidocnum,
            END OF s_itm.
    DATA: wa_itm TYPE s_itm,
          t_itm TYPE STANDARD TABLE OF s_itm.
LOOP AT DATA_PACKAGE.
        SELECT material
                      docnum
        FROM /bic/aDSO_itm
   APPENDING TABLE t_itm
   WHERE docnum = <comm_structure>-docnum.
endloop.
IF NOT t_itm[] IS INITIAL.
      SORT t_itm ASCENDING BY docnum.
     DELETE ADJACENT DUPLICATES FROM t_itm      COMPARING docnum.
     ENDIF.
Now write this below code in the update routine of 0material in the transformation from 2lis_2_HDR.
CLEAR RESULT.
READ TABLE T_itm INTO WA_Itm WITH KEY
      DOCNUM = comm_structure-docnum.
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = WA_itm-material.
ENDIF.

Start routine at update rules.

Hi all,
I am working with Sales schedule line data.
Data flow is R/3 -
DSO----CUbe.
I have to load all the data for all sales organizations till DSO.
From DSO to CUbe I have to load the data only for 4 sales organizations.
I am planning to write Start routine in the update rules.
Could any body Please help me with code..
REgards,
MAdhu

Place this code in your start routine:
*remove sales organization, assume this is a standard infoobject
this deletes all data except for the 4 sales orgs
DELETE DATA_PACKAGE WHERE NOT ( /BI0/0SALES_ORG = 1 OR
                                                               /BI0/0SALES_ORG = 2 OR
                                                               /BI0/SALES_ORG = 3 OR
                                                               /BI0/SALES_ORG = 4 ) .
Also put restrictions in your infopackage, even though its redundant.

Start Routine or Update Rule Routine

Hello Dear Friends
I have a requirement here to create an object lets call it TYPE and i am using another infoobject called movement type.
My requirement in the cube is that TYPE should indicate A if movment type is 123 or 456 and B if movment type is 789.Anything else other than these numbers dont need to make it in the cube either for Movement type or for TYPE and needs to be deleted.I believe this will be a routine in the Start Routine.If not please let me know.Also if someone can give me the code on how to write the routine will be really appreciated.
Thanks again.

hi,
Go for an Update routine as you do not have the TYPE in the Data source.
if ( comm_structure-momenttype = '123' or
   comm_structure-momenttype = '456' ).
comm_structure-type = 'A'.
elseif comm_structure-momenttype = '789' .
comm_structure-type = 'B'.
endif.
Adn in the start routine :
delete data_package where momenttype ne '123' and
                                         momenttype ne '456' and
                                         momenttype ne '789' .
If you can add the type in the data source then write the below code.
delete data_package where momenttype ne '123' and
                                         momenttype ne '456' and
                                         momenttype ne '789' .
loop at data_package.
if ( data_package-momenttype = '123' or
   data_package-momenttype = '456' ).
data_package-type = 'A'.
elseif data_package-momenttype = '789' .
data_package-type = 'B'.
endif.
modify data_package.
endloop.
good luck

Process: Start Routine, Delta, Update Rules

Hi SDN,
Can someone point to detailed discussion on the events related to loading, such as:
Start Routine is exectued before each data package, or entire load?
Update rules are applied row by row or the entire KYF column in a data package is processed first?
When is delta determined, before Start Routine is executed, or, after it is executed, and before update rules are applied? This is important to know if we are dropping records from the data package.
If you have the answers, would love to hear and appreciate.
Thanks.
Saf.
P.S. I always award points.

Thanks Farhan,
If you don't mind, can you outline how delta is determined, between ODS and ODS and ODS and Infocube. If I am correct, records in the sender object are marked as sent. Can I look at the field where the flag is?
Also, you are saying that only those records make up the data package which are new, in case of a delta load. That means, if there were no new records, Start Routine would not even execute, or it still will but do not have any records processed?
I already awarded the points.
Thanks.
Saf.

COLLECT statement in start routine of update rules for data coming from R/3

Hi,
I have more than one record with the same key combination that comes from R/3. I have a condition wherein I write into an error log. Hence I want only ione entry to be written into a error log and not multiple instances.
I had written a similar one for ODS.
Loop at IT_ODS into WA_ODS.
Collect WA_ODS into IT_SUM.
How to collect data that is coming in from R/3. Any inputs?

Hi,
I think, by using ATEND you can acheive control break logic.
Regards,
-Vj

ABAP Code in Start Routine for restricing the data records from ODS1 - ODS2

Hi
I need small ABAP Code in Start Routine Of Update rules Of ODS . Im in BW 3.5 .
I have records like below in first layer ODS and i want to restrict some records while going to second layer ODS ..
ODS1 :-
DocNO   EventType    Date
123         001             08/08/2008
123         003             08/08/2008
123         011              09/08/2008
I want one record in ODS2 for this document number whose EventType = 001 only and date of third record ... like below
Doc NO     EventType      From Date          Todate
123              001               08/08/2008         09/08/2008
So how can i get like this record in the ODS2 which will get data from ODS1 . So i need to write the code in the start routine of the ODS2 .
So please give the me the code for start routine ....
Regards
Suresh

Its difficult in BW 3.5 to include this logic in START_ROUTINE as you cannot add the extra to_date field to the DATA_PACKAGE table.
You need to create a new global internal table with the same structure of DATA_PACKAGE with additional field to_date. then use the logic to fill in the global internal table
define a internal table new_data_package with the required structure like (docno, eventtype, fromdate todate)
data: l_w_datapkg_001 type data_package,
data: l_w_newdatapkg type new_data_package,
data: l_w_datapkg_011 type data_package
LOOP AT DATA_PACKAGE INTO l_w_datapkg_001 WHERE event_type = '001'.
l_w_newdatapkg-docno = l_w_datapkg_001-docno.
l_w_newdatapkg-event_type = l_w_datapkg_001-event_type.
l_w_newdatapkg-fromdate = l_w_datapkg_001-date.
MOVE CORRESPONDING FIELDS OF l_w_datapkg_001 INTO l_w_newdatapkg.
READ TABLE data_package INTO l_w_datapkg_011
WITH KEY docno = l_w_datapkg_001-docno
                 event_type = '011'.
l_w_newdatapkg-to_date = l_w_datapkg_011-date.
APPEND l_w_newdatapkg TO new_data_package
ENDLOOP.
Now the new datapackage contains the ODS2 data that u needed

Start routine for Update Rules

Similar Messages

Maybe you are looking for