Start sap using run
hi guys
start sap using run
in c: type startsapr3 and follow the syntax
Hello
1 - Start CMD.exe
2- Goto directory of Kernel
3- sapstart.exe name=<SID> nr=<SYS_NUMBER> sapdiahost=<hostanme>
Cheers,
Levi Shaked
Similar Messages
-
Cannot start SAP using commond startsap on unix
Hi
I am facing issue while starting SAP , when i run Startsap command on Unix i am receiving following error.
saposcol already running
Running /usr/sap/CID/SYS/exe/run/startdb
Trying to start CID database ...
Log file: /home/cidadm/startdb.log
No SQL*Net V2 connect to CID available.
Check that the listener is running: "lsnrctl status".
Start the listener as user oracid: "lsnrctl start".
/usr/sap/CID/SYS/exe/run/startdb: Terminating with error code 14
I have started listener lsnrctl by becoming system admin and lsnrctl is started still i am gettig above error
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.2.0.2.0 - Production
Start Date 30-JUN-2010 07:51:50
Uptime 0 days 1 hr. 1 min. 30 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/CID/102_64/network/admin/listener.ora
Listener Log File /oracle/CID/102_64/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nsu1u660)(PORT=1521)))
The listener supports no services
The command completed successfully
Please let is know what is the issue.
Thanks
Uttam Borsare> Thanks for ur reply but the sap application and database was running fine till few days back and no setting has been changed any
> where.
Without looking at the system it's impossible to give a reason. Make sure you start the listener with ora<SID>. If that doesn't help open an OSS call (BC-DB-ORA) and let the support have a look on the system.
Markus -
Possible ways to start SAP Web AS services
I am using J2EE SAP Web AS 7.0 on UNIX platform and herein i use startsap script to start SAP as well as database services. My concern here is that what all are the possible ways to start the SAP services apart from the above mentioned script? One i could figure out is to run all the commands in the script one by one, though does not make sense if the script is already available
Reason for asking above question is that i want to set an environment variable whenever SAP Engine starts up. And, if i embed this line in startsap script it would solve my purpose but if there is any other way also to start SAP services, then i have to cover those use cases also. So, please provide your suggestions for my requirement.
ThanksThanks for your input and it looks like adding an environment variable in startsap script is not a good option.
My requirement is that my SDA file has dependecy on some third party dll's and at the time of starting SAP Web AS, this dll path should be available at the beginning of LIBPATH variable. So, please let me know if some fix is available for my requirement.
Also, i have discoverd that SAP profile (located at /usr/sap/<SID>/profile/START_JC<SID>_<machine name>) has the required parameters( LIBPATH, etc) and if i add my dll path in these environment variables, i am able to load my dll at the SAP starting time. Here my questions are:
1. Is it fine to make changes in this profile file?
2. Would my changes be overwritten if the kernel upgrade happens?
3. If i start SAP using MMC (suggested by you), still this profile file be read for starting SAP Web AS and the dll's would be loaded?
Apart from this i tried out using "There is a java version as well, which can be started from a browser:
http://<hostname>:5<instance number>13" which internally uses MC. Here if i try starting SAP WebAS, it prompts for user name and password. I tried out <SID>adm user, J2EE Administrator user and machine root user but all these options were ruled out by the Authentication module. Can you please suggest which user name should i try to stop/start SAP using MMC?
Thanks -
I have problem about starting SAP system. I executed stopsap command. After that I rebooted the HPUX system. And I try to execute startsap command.System gives me
message below.
brckxits:bxdadm 22> startsap
Checking ORC Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
17:27:59 11.04.2007 LOG: Effective User Id is root
This is Saposcol Version COLL 20.90 700 - v2.05 for HP-UX - 28.7.2006
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 2240) is already running .....
saposcol already running
ABAP Database ORC must be started on remote server
brckxits:bxdadm 23>Hi,
I get a following message when i try to start SAP using STARTSAP.
maltr35:sbdadm 16> startsap
Checking SBD Database
ABAP Database is not available via R3trans
Checking SBD Database
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 640 - AIX v10.35 5L-64 bit 070216
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 4448328) is already running .....
saposcol already running
Running /usr/sap/SBD/SYS/exe/run/startdb
Trying to start SBD database ...
Log file: /home/sbdadm/startdb.log
/usr/sap/SBD/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
The STARTDB.LOG states that the DATABASE is already OPEN with error code 0012.
<b>I tried to start the oracle manually and tried starting sap using startsap R3. then it gives me the following error. </b>
maltr35:sbdadm 15> startsap R3
Checking SBD Database
ABAP Database is not available via R3trans
Checking SBD Database
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 640 - AIX v10.35 5L-64 bit 070216
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 4448328) is already running .....
saposcol already running
Database SBD must be started first
ALSO STARTED THE LISTERNER AND STARTED THE DATABASE AND TRIED STARTING SAP STILL IT FAILS WITH THE FIRST ERROR MESSAGE MENTIONED ABOVE, KINDLY LET ME KNOW WHAT SHOULD BE DONE. -
DISP+WORK running then died at the time of starting sap
Hello All
I have a problem of starting sap.
DISP+WORK IS RUNNING FINE THEN DIED SUDDENLY.
I HAVE CHECKED THE DATABASE AND IT IS WORKING FINE.
and I am getting this error in file dev_w0
ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4532]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server IDES_IDT_00 on host IDES (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Aug 18 11:26:12 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10486
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3512) [dpnttool.c 327]
Anyone can help me please
RegardsHi,
Please check following things:
1:Listner is running or not.
2:As env variable dbms_type
ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
is not set, set it to ORA.
Shivam -
running windows 7 with plenty of memory.when i use the smart brush program is fine but when i start to use detail smart brush program shuts down,PLEASE ADVISE what corrective actions need done
thank youYou should post that on the Boot Camp forum, that is where all the Boot Camp and Windows guys hang out.
Good luck. -
If I come out of my house using wifi, but fb is running in the background, will it start to use up my data for 3G?!
Unless you are actively accessing the FaceBook app or actively accessing FaceBook via Safari, nothing is being downloaded.
This applies to iOS 5 as well.
http://whenwillapple.com/blog/2010/04/19/iphone-os-4-multitasking-explained-agai n/ -
I started up using the app install DVD and tried to run a test and got stuck and froze what next? Help
Well it started like this I've been away for 12 days and I usually inplug things before I go on vacation, I
Come plug everything back in start up and it's stuck on the grey screen with the ape logo and the spinning gear. I left about 3hrs on this then assumed its struggle to find the start up disc so I plug the original DVD start up disc in. Then it start up with that to the install screen and could find a hard disc to install to? So I eject that DVD and try with the other DVD. And now this is where I am now.
I have a password set on my start up and guest user. I am just trying to start up as guest user and the gear has stopped spinning and now I just have a grey screen with apple logo.
Ups I now have a grey screen with no apple logo put the screen is textured. -
Dispatcher stops after starting SAP and turning from green to grey
After starting SAP on the SAP Console, the dispatcher turns from green to grey and logging on to SAP is not possible. Below is the developer trace file for the process:
SAPPRD\saploc\PRD\DVEBMGS00\work\dev_disp
trc file: "dev_disp", trc level: 1, release: "640"
Tue Mar 27 14:47:21 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 3732
***LOG Q00=> DpSapEnvInit, DPStart (00 3732) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Tue Mar 27 14:47:34 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0000.qqq.nxst) took 13 seconds
Tue Mar 27 14:47:51 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS
settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 21528 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04BA0040, size: 2520320)
DpShMCreate: allocated sys_adm at 04BA0040
DpShMCreate: allocated wp_adm at 04BA17A8
DpShMCreate: allocated tm_adm_list at 04BA6BC0
DpShMCreate: allocated tm_adm at 04BA6BE8
DpShMCreate: allocated wp_ca_adm at 04DC4B30
DpShMCreate: allocated appc_ca_adm at 04DC9180
DpShMCreate: allocated comm_adm_list at 04DCA8F0
DpShMCreate: allocated comm_adm at 04DCA908
DpShMCreate: allocated vmc_adm_list at 04DF9708
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04DF9730
DpShMCreate: allocated wall_adm at 04DF9738
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2264 blocks reserved for free list.
ES initialized.
Tue Mar 27 14:47:52 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( SAPPRD) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Mar 27 14:48:32 2007
ERROR => W0 (pid 5396) died [dpxxdisp.c 12187]
ERROR => W1 (pid 1536) died [dpxxdisp.c 12187]
ERROR => W2 (pid 5404) died [dpxxdisp.c 12187]
ERROR => W3 (pid 1520) died [dpxxdisp.c 12187]
ERROR => W4 (pid 4208) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3584) died [dpxxdisp.c 12187]
ERROR => W6 (pid 4512) died [dpxxdisp.c 12187]
ERROR => W7 (pid 5484) died [dpxxdisp.c 12187]
ERROR => W8 (pid 5488) died [dpxxdisp.c 12187]
ERROR => W9 (pid 5500) died [dpxxdisp.c 12187]
ERROR => W10 (pid 888) died [dpxxdisp.c 12187]
ERROR => W11 (pid 5512) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W12 (pid 5520) died [dpxxdisp.c 12187]
ERROR => W13 (pid 5528) died [dpxxdisp.c 12187]
ERROR => W14 (pid 5532) died [dpxxdisp.c 12187]
ERROR => W15 (pid 5536) died [dpxxdisp.c 12187]
ERROR => W16 (pid 5468) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W17 (pid 5564) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W18 (pid 1676) died [dpxxdisp.c 12187]
ERROR => W19 (pid 5652) died [dpxxdisp.c 12187]
ERROR => W20 (pid 4704) died [dpxxdisp.c 12187]
ERROR => W21 (pid 1796) died [dpxxdisp.c 12187]
ERROR => W22 (pid 5568) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W23 (pid 6084) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W24 (pid 5704) died [dpxxdisp.c 12187]
ERROR => W25 (pid 3580) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5396 (SIGUSR2)
ERROR => DpWpKill(5396, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-1536 (SIGUSR2)
ERROR => DpWpKill(1536, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-5404 (SIGUSR2)
ERROR => DpWpKill(5404, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1520 (SIGUSR2)
ERROR => DpWpKill(1520, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-4208 (SIGUSR2)
ERROR => DpWpKill(4208, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3584 (SIGUSR2)
ERROR => DpWpKill(3584, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-4512 (SIGUSR2)
ERROR => DpWpKill(4512, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-5484 (SIGUSR2)
ERROR => DpWpKill(5484, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-5488 (SIGUSR2)
ERROR => DpWpKill(5488, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-5500 (SIGUSR2)
ERROR => DpWpKill(5500, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-888 (SIGUSR2)
ERROR => DpWpKill(888, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-5512 (SIGUSR2)
ERROR => DpWpKill(5512, SIGUSR2) failed [dpxxtool.c 2468]
killing W12-5520 (SIGUSR2)
ERROR => DpWpKill(5520, SIGUSR2) failed [dpxxtool.c 2468]
killing W13-5528 (SIGUSR2)
ERROR => DpWpKill(5528, SIGUSR2) failed [dpxxtool.c 2468]
killing W14-5532 (SIGUSR2)
ERROR => DpWpKill(5532, SIGUSR2) failed [dpxxtool.c 2468]
killing W15-5536 (SIGUSR2)
ERROR => DpWpKill(5536, SIGUSR2) failed [dpxxtool.c 2468]
killing W16-5468 (SIGUSR2)
ERROR => DpWpKill(5468, SIGUSR2) failed [dpxxtool.c 2468]
killing W17-5564 (SIGUSR2)
ERROR => DpWpKill(5564, SIGUSR2) failed [dpxxtool.c 2468]
killing W18-1676 (SIGUSR2)
ERROR => DpWpKill(1676, SIGUSR2) failed [dpxxtool.c 2468]
killing W19-5652 (SIGUSR2)
ERROR => DpWpKill(5652, SIGUSR2) failed [dpxxtool.c 2468]
killing W20-4704 (SIGUSR2)
ERROR => DpWpKill(4704, SIGUSR2) failed [dpxxtool.c 2468]
killing W21-1796 (SIGUSR2)
ERROR => DpWpKill(1796, SIGUSR2) failed [dpxxtool.c 2468]
killing W22-5568 (SIGUSR2)
ERROR => DpWpKill(5568, SIGUSR2) failed [dpxxtool.c 2468]
killing W23-6084 (SIGUSR2)
ERROR => DpWpKill(6084, SIGUSR2) failed [dpxxtool.c 2468]
killing W24-5704 (SIGUSR2)
ERROR => DpWpKill(5704, SIGUSR2) failed [dpxxtool.c 2468]
killing W25-3580 (SIGUSR2)
ERROR => DpWpKill(3580, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:42 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue Mar 27 13:48:42 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action
Table
0 DIA 5396 Ended no 1 0 0
1 DIA 1536 Ended no 1 0 0
2 DIA 5404 Ended no 1 0 0
3 DIA 1520 Ended no 1 0 0
4 DIA 4208 Ended no 1 0 0
5 DIA 3584 Ended no 1 0 0
6 DIA 4512 Ended no 1 0 0
7 DIA 5484 Ended no 1 0 0
8 DIA 5488 Ended no 1 0 0
9 DIA 5500 Ended no 1 0 0
10 DIA 888 Ended no 1 0 0
11 DIA 5512 Ended no 1 0 0
12 UPD 5520 Ended no 1 0 0
13 UPD 5528 Ended no 1 0 0
14 UPD 5532 Ended no 1 0 0
15 UPD 5536 Ended no 1 0 0
16 UPD 5468 Ended no 1 0 0
17 ENQ 5564 Ended no 1 0 0
18 BTC 1676 Ended no 1 0 0
19 BTC 5652 Ended no 1 0 0
20 BTC 4704 Ended no 1 0 0
21 BTC 1796 Ended no 1 0 0
22 BTC 5568 Ended no 1 0 0
23 SPO 6084 Ended no 1 0 0
24 UP2 5704 Ended no 1 0 0
25 UP2 3580 Ended no 1 0 0
Dispatcher Queue Statistics Tue Mar 27 13:48:42 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Tue Mar 27 13:48:42 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T26, U27, , SAPPRD, 14:48:24, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Tue Mar 27 13:48:42 2007
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:47 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1844) (SOFT_KILL)
Stop icman
killing process (5376) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 26
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
return errno (-17) to T26
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T26 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1216
dp_tm_adm[26].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1175003332
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 26
DpListInsert: insert elem 26 into tmadm_free_list (at begin)
DpListInsert: 175 elems in tmadm_free_list
DpListRemove: remove elem 26 from tmadm_inuse_list
DpListRemove: 26 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:1844 HANDLE:1500)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:48 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1844 HANDLE:1500)
[DpProcDied] Process died (PID:5376 HANDLE:1492)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'SAPPRD'
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1504
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3732) [dpxxdisp.c 8495]
Good Bye .....what is the name of your hostname? 'pun-idmqa-vm1'?
Try changing the hostname for another one with 8 characters...
good luck, -
FJS-00012 ERROR while executing script in start SAP system
Hi experts,
I am getting error in the Oracle preload actions while installing the SAP 4.7 using the ORacle 9.2.0.1..
FJS-00012 Error when executing script in start SAP system(post processing)
My comp configuration is as follows:
160 gb hard disk
RAM 1GB
OS: win 2003 server enterprise edition
oracle 8.1.7
During the Database Load (post processing) section of the
installation, i get an error and the installation fails.
I am giving all the logs here including the trace log and the
Sapview.log file ans sapinst.
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: START OF LOG: 20070511002459
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ESA\SYS\exe\run/R3load.exe -ctf I E:\db3\EXPORT3/DATA/SAPVIEW.STR C:\SAPinst ORACLE KERNEL/DDLORA.TPL C:\SAPinst ORACLE KERNEL/SAPVIEW.TSK ORA -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -o D
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: END OF LOG: 20070511002500
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: START OF LOG: 20070511070423
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ESA\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE KERNEL/SAPVIEW.cmd -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\ora81 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPESA's password
DbSl Trace: Connecting as /@ESA on connection 0 ...
DbSl Trace: Attaching to DB Server ESA (con_hdl=0,svchp=002BD418,svrhp=002BD224)
DbSl Trace: Starting user session (con_hdl=0,svchp=002BD418,srvhp=002BD224,usrhp=00304E94)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=002BD418,usrhp=00304E94)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPESA/<pwd>@ESA on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=002BD418,srvhp=002BD224,usrhp=00304E94)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance esa is running on MALTI with ORACLE version 8.1.7.4.1 since 20070511
(DB) INFO: connected to DB
(DB) INFO: /SAPTRX/A_CONDF4 created
(DB) INFO: /SAPTRX/VDASFEV created
(DB) INFO: /SAPTRX/VDASFPAR created
(DB) INFO: /SAPTRX/VD_AOMIL created
(DB) INFO: /SAPTRX/VD_AOPAC created
(DB) INFO: /SAPTRX/VD_AOPAE created
(DB) INFO: /SAPTRX/VD_AOPAI created
(DB) INFO: /SAPTRX/VD_AOPAR created
(DB) INFO: /SAPTRX/VD_AOTD1 created
(DB) INFO: /SAPTRX/VD_AOTD2 created
(DB) INFO: /SAPTRX/VD_AOTDD created
(DB) INFO: /SAPTRX/VD_AOTYP created
(DB) INFO: /SAPTRX/VD_ASPAR created
(DB) INFO: /SAPTRX/VD_CONDL created
(DB) INFO: /SAPTRX/V_AODD02 created
(DB) INFO: /SAPTRX/V_DD03 created
(DB) INFO: /SAPTRX/V_DD03X created
(DB) INFO: /SDF/SMODICOMP created
(DB) INFO: /SDF/SMODIDEVC created
(DB) INFO: /SDF/UMOD_COMP created
(DB) INFO: ACEPSOIT_UPD created
(DB) INFO: ADJV_TRANS_DIF created
(DB) INFO: AFFWV0 created
(DB) INFO: AFKO_LAUFN created
(DB) INFO: AFSPLIT created
(DB) INFO: AFVCP created
(DB) INFO: ALM_ME_T003O_IS created
(DB) INFO: ALM_ME_T350I created
(DB) INFO: ALM_ME_TQ80_T created
(DB) INFO: ANEKPV created
(DB) INFO: APOUPD created
(DB) INFO: APPL_DEVC created
(DB) INFO: APPL_DIAL created
(DB) INFO: APPL_DOMA created
(DB) INFO: APPL_DTEL created
(DB) INFO: APPL_ENQU created
(DB) INFO: APPL_FUGR created
(DB) INFO: APPL_FUGRG created
(DB) INFO: APPL_FUNC created
(DB) INFO: APPL_INDX created
(DB) INFO: APPL_MCOB created
(DB) INFO: APPL_MENU created
(DB) ERROR: DDL statement failed
(CREATE VIEW "APPL_MODS" ( "NAME" , "TYP" , "MEMBER" , "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X')
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=002BD418,usrhp=00304E94)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=002BD418,srvhp=002BD224)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: END OF LOG: 20070511070433
SAPINST
INFO 2007-05-10 23:59:05
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2007-05-10 23:59:16
The 'saploc' share exists at directory 'D:\usr\sap'. Choosing drive D: as SAP System drive.
INFO 2007-05-10 23:59:21
Copying file E:/KERNEL/NT/COMMON/OraVolatileDatabaseParameters.xml to: OraVolatileDatabaseParameters.xml.
INFO 2007-05-10 23:59:21
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.xml.
INFO 2007-05-11 00:01:52
Copying file E:/db1/EXPORT1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
INFO 2007-05-11 00:01:52
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.XML.
INFO 2007-05-11 00:01:52
Copying file system node E:\db1\EXPORT1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.
INFO 2007-05-11 00:01:52
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2007-05-11 00:01:52
Copying file E:/db1/EXPORT1/DB/DDLORA.TPL to: DDLORA.TPL.
INFO 2007-05-11 00:01:52
Creating file C:\SAPinst ORACLE KERNEL\DDLORA.TPL.
INFO 2007-05-11 00:01:52
Copying file system node E:\db1\EXPORT1/DB/DDLORA.TPL with type NODE to DDLORA.TPL succeeded.
INFO 2007-05-11 00:01:52
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2007-05-11 00:01:57
Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2007-05-11 00:01:57
Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2007-05-11 00:01:57
Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
INFO 2007-05-11 00:03:00
Package table created
PHASE 2007-05-11 00:04:15
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2007-05-11 00:04:15
SAP Web Application Server
PHASE 2007-05-11 00:04:15
Request common parameters of SAP System
PHASE 2007-05-11 00:04:15
Create operating system accounts
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/keydb.xml to: C:/SAPinst ORACLE KERNEL/keydb.1.xml.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\keydb.1.xml.
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.xml to: C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.1.xml.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.1.xml.
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.1.XML.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.1.XML.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1004 ACCOUNTNAME=malti\SAP_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1005 ACCOUNTNAME=malti\SAP_ESA_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1006 ACCOUNTNAME=malti\SAP_ESA_GlobalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Global Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1007 ACCOUNTNAME=ORA_ESA_DBA ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Operator Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1008 ACCOUNTNAME=ORA_ESA_OPER ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
INFO 2007-05-11 00:04:18
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1009 ACCOUNTNAME=malti\esaadm ACCOUNTTYPE=USER DESCRIPTION=SAP System Administrator MEMBERSHIP=malti\SAP_ESA_GlobalAdmin,malti\Users,Administrators,ORA_ESA_DBA,ORA_ESA_OPER,malti\SAP_LocalAdmin,malti\SAP_ESA_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2007-05-11 00:04:18
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1010 ACCOUNTNAME=malti\SAPServiceESA ACCOUNTTYPE=USER CONDITION=YES DESCRIPTION=SAP System Service Administrator MEMBERSHIP=malti\SAP_ESA_GlobalAdmin,Administrators,ORA_ESA_DBA,ORA_ESA_OPER,malti\SAP_LocalAdmin,malti\SAP_ESA_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2007-05-11 00:04:18
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
INFO 2007-05-11 00:04:21
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-05-11 00:04:22
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa_16 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata1\esa620_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata1\esa620_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata2\esa620_2.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata2\esa620_2 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata3\esa620_3.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata3\esa620_3 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata4\esa620_4.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata4\esa620_4 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata4\esa620_5.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata4\esa620_5 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata5\esa620_6.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata5\esa620_6 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata5\esa620_7.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata5\esa620_7 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esa620_8.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa620_8 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esa620_9.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa620_9 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esausr_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esausr_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata2\roll_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata2\roll_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata3\temp_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata3\temp_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata1\system_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata1\system_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-05-11 00:05:40
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2007-05-11 00:05:40
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-05-11 00:05:41
Creating file D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:05:42
Creating file D:\oracle\ora81\database\initESA.sap.
INFO 2007-05-11 00:05:43
Copying file E:/KERNEL/NT/COMMON/INSTALL/INITSID.DBA to: D:\oracle\ora81/database/initESA.dba.
INFO 2007-05-11 00:05:43
Creating file D:\oracle\ora81\database\initESA.dba.
INFO 2007-05-11 00:05:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:05:45
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:05:45
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:05:45
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:05:46
Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
INFO 2007-05-11 00:05:51
See 'D:\oracle\ora81/bin/oradim -new -sid ESA -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
INFO 2007-05-11 00:05:51
'D:\oracle\ora81/bin/oradim -new -sid ESA -STARTMODE auto' returned with '0'.
INFO 2007-05-11 00:05:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:05:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:31
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:07:31
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:07:31
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:07:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:34
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:09:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:09:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:20
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:35
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:37
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:15
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:53
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:14:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:14:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:11
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:16:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:16:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:18:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:18:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:03
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:20:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:20:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:22:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:22:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:47
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:56
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:15
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:41
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:46
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:24:46
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:24:46
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:24:46
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-05-11 00:24:47
See 'D:\oracle\ora81/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-05-11 00:24:47
'D:\oracle\ora81/bin/lsnrctl stat' returned with '3'.
INFO 2007-05-11 00:24:47
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-05-11 00:24:48
See 'D:\oracle\ora81/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-05-11 00:24:48
'D:\oracle\ora81/bin/lsnrctl start' returned with '0'.
INFO 2007-05-11 00:24:49
Copying file E:/KERNEL/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2007-05-11 00:24:49
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2007-05-11 00:24:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
PHASE 2007-05-11 00:24:54
Database Load
INFO 2007-05-11 00:24:56
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:00
Task files created
INFO 2007-05-11 00:25:00
Command files created
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 02:18:03
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL1.log
INFO 2007-05-11 02:18:03
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 02:44:07
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX2.log
INFO 2007-05-11 02:44:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 03:55:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:25:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:42:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:47:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:55:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:57:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:59:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:01:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:03:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:04:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:05:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 07:04:33
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 07:04:33
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
ERROR 2007-05-11 07:04:33
FJS-00012 Error when executing script.
THANKS ALLL IN ADVANCE,
Regards,
Maltino space left on devices...
==> "<b>MOS-01109 Needed space on mountpoint F:/ is 5.248e07 KB, but got only 4.26433e07 KB.</b>"
and others...
-> provide more space and restart
GreetZ, AH -
Unabl to start sap (DISP+WORK Stopped) While installing/importing database
Dear Experts, As iam installing/ importing windows ecc 6.0 sr3 & DB2 9.5 ( Database exported using Hetrogeneous system copy from sqlserver 2005 to DB2), All phases finished and finally start sap failed due to db connect failure and i have tried by mmc and command mode but no hope. . Kindly help. trans log file and dev_w0 files below.
_Trans log file_
4 ETW000 r3trans version 6.14 (release 700 - 05.03.09 - 08:28:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 06.10.2009 - 05:15:05
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Oct 06 05:15:07 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbdb6slib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dbdb6slib.dll), hdl 0 9294 0.009294
4 ETW000 [dev trc ,00000] using "E:\usr\sap\SA4\SYS\exe\uc\NTAMD64\dbdb6slib.dll" 41 0.009335
4 ETW000 [dev trc ,00000] Library 'dbdb6slib.dll' loaded 25 0.009360
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbdb6slib.dll 23 0.009383
4 ETW000 [dev trc ,00000] Version of 'dbdb6slib.dll' is "700.08", patchlevel (0.201) 641 0.010024
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbdb6slib.dll 26 0.010050
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbdb6slib.dll 26 0.010076
4 ETW000 [dev trc ,00000] New connection 0 created 36 0.010112
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.010162
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.010193
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 24 0.010217
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 40 0.010257
4 ETW000 [dev trc ,00000] Tue Oct 06 05:15:08 2009 472441 0.482698
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '
mascon-sap2\sapmnt\SA4\SYS\global\db6\WINDOWS_AMD64\db6_clidriver\bin\db2app64.dll' successfully loaded
4 ETW000 51 0.482749
4 ETW000 35 0.483487
4 ETW000 [dev trc ,00000] (0.54) DB6: error handling in DBSL CLP (note 940260) 24 0.483511
4 ETW000 [dev trc ,00000] (0.69) DB6: technical support of DB2 CLI driver (note 962892) 25 0.483536
4 ETW000 [dev trc ,00000] (0.73) DB6: log table name on TRUNCATE failure (note 970743) 24 0.483560
4 ETW000 [dev trc ,00000] (0.79) DB6: column type XML in index size calculation (note 982993)
4 ETW000 34 0.483594
4 ETW000 [dev trc ,00000] (0.82) DB6: CAST for SSTRING data types (note 989568) 24 0.483618
4 ETW000 [dev trc ,00000] (0.86) DB6: long runtimes for R3szchk (note 1000847) 24 0.483642
4 ETW000 [dev trc ,00000] (0.88) DB6: patch collection Dec 06 (note 1005574) 24 0.483666
4 ETW000 [dev trc ,00000] (0.96) DB6: patch collection Jan 07 (note 1017852) 24 0.483690
4 ETW000 [dev trc ,00000] (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102) 24 0.483714
4 ETW000 [dev trc ,00000] (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779) 25 0.483739
4 ETW000 [dev trc ,00000] (0.107) DB6: patch collection Apr 07 (note 1047194) 24 0.483763
4 ETW000 [dev trc ,00000] (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
4 ETW000 37 0.483800
4 ETW000 [dev trc ,00000] (0.113) DB6: work process type in application snapshot (note 1059905)
4 ETW000 88 0.483888
4 ETW000 [dev trc ,00000] (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
4 ETW000 35 0.483923
4 ETW000 [dev trc ,00000] (0.117) DB6: patch for execution of long DDL statements (note 1069658)
4 ETW000 35 0.483958
4 ETW000 [dev trc ,00000] (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
4 ETW000 35 0.483993
4)
4 ETW000 35 0.484718
4 ETW000 [dev trc ,00000] (0.198) DB6: patch collection 02/09 (note 1294443) 24 0.484742
4 ETW000 [dev trc ,00000] (0.201) DB6: cobra enhancements (note 1315762) 24 0.484766
4 ETW000 [dev trc ,00000] Supported features: 20 0.484786
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 28 0.484814
4 ETW000 [dev trc ,00000] ..done 475 0.485289
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 22 0.485311
4 ETW000 [dev trc ,00000] Running with CLI driver. 376278 0.861589
4 ETW000 [dev trc ,00000] DB2 client driver version '09.05.0004' 373762 1.235351
4 ETW000 [dev trc ,00000] Connected to DB server type 'DB2/NT64' 2467 1.237818
4 ETW000 [dev trc ,00000] Connected to DB server version '09.05.0004' 520 1.238338
4 ETW000 [dev trc ,00000] Connected to 'SA4' as 'SAPSA4' schema 'SAPSA4' o.k. 44597 1.282935
4 ETW000 [dev trc ,00000] Connected: con_hdl=0 ; appl_hdl=19; appl_id="10.0.0.146.44548.091006101508"
4 ETW000 50 1.282985
4 ETW000 [dev trc ,00000] Database code page is ok. 480 1.283465
4 ETW000 [dev trc ,00000] Tue Oct 06 05:15:09 2009 241001 1.524466
4 ETW000 [dev trc ,00000] Database collating sequence is ok. 38 1.524504
4 ETW000 [dev trc ,00000] DB2_WORKLOAD=SAP is set in DB2 registry as required. 45663 1.570167
4 ETW000 [dev trc ,00000] CLI Insert Buffering is disabled on single partition databases. 35785 1.605952
4 ETW000 [dev trc ,00000] INFO: Unable to determine SAPDBHOST; defaulting to 'UNKNOWN' 255 1.606207
4 ETW000 [dev trc ,00000] Connection 0 opened (DBSL handle 0) 27 1.606234
4 ETW000 [dev trc ,00000] INFO: Unable to determine SAPDBHOST; defaulting to 'UNKNOWN' 20363 1.626597
4 ETW000 Connected to database.
4 ETW000 [dev trc ,00000] Disconnecting from ALL connections: 72901 1.699498
4 ETW000 [dev trc ,00000] Disconnected from 'SA4' 2049 1.701547
4 ETW000 [dev trc ,00000] Disconnected: con_hdl=0 ; appl_hdl=19; appl_id="10.0.0.146.44548.091006101508"
4 ETW000 46 1.701593
4 ETW000 [dev trc ,00000] Disconnected from connection 0 79 1.701672
4 ETW000 [dev trc ,00000] statistics db_con_commit (com_total=0, com_tx=0) 121 1.701793
4 ETW000 [dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0) 24 1.701817
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0000).
4 ETW000 date&time: 06.10.2009 - 05:15:09
dev_w0 file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Oct 06 05:07:11 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.201)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid SA4
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 201
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3572
M
M kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3572) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Tue Oct 06 05:07:12 2009
M ThInit: running on host mascon-sap2
M calling db_connect ...
C Registering callback for dynamic profile parameters
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] CON = 0 (BEGIN)
C &+ DbSlConnectDB6: unable to open file: '
mascon-sap2\sapmnt\SA4\SYS\global\dscdb6.conf'
C
C &+
C &+
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] (END)
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1451]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10561]
M
M Info for wp 0
M
M pid = 3572
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server mascon-sap2_SA4_00 on host mascon-sap2 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue Oct 06 05:07:12 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10781
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3572) [dpnttool.c 333]
Thanks in advanc
ChidamDear experts, As i have updated as per yours inputs and still unable to start sap. Kindly help.
1. SAPDBHOST is now accepting and there is no issues on "SAPDBHOST unknown."
2. dscdb6.conf file is available and it has all permission (including login userlevel)
3. dscdb6.conf was recreated new and tried, still dev_w0 shows
"M ThInit: running on host mascon-sap2
M calling db_connect ...
C Registering callback for dynamic profile parameters
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] CON = 0 (BEGIN)
C &+ DbSlConnectDB6: unable to open file: '
mascon-sap2\sapmnt\SA4\SYS\global\dscdb6.conf' "
4. Environment variable all were added.
Tans log file
4 ETW000 r3trans version 6.14 (release 700 - 05.03.09 - 08:28:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.10.2009 - 06:34:10
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 07 06:34:12 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbdb6slib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dbdb6slib.dll), hdl 0 9419 0.009419
4 ETW000 [dev trc ,00000] using "E:\usr\sap\SA4\SYS\exe\uc\NTAMD64\dbdb6slib.dll" 33 0.009452
4 ETW000 [dev trc ,00000] Library 'dbdb6slib.dll' loaded 24 0.009476
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbdb6slib.dll 23 0.009499
4 ETW000 [dev trc ,00000] Version of 'dbdb6slib.dll' is "700.08", patchlevel (0.201) 635 0.010134
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbdb6slib.dll 26 0.010160
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbdb6slib.dll 26 0.010186
4 ETW000 [dev trc ,00000] New connection 0 created 36 0.010222
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 60 0.010282
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.010313
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 24 0.010337
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 41 0.010378
4 ETW000 [dev trc ,00000] Wed Oct 07 06:34:13 2009 473631 0.484009
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '
mascon-sap2\sapmnt\SA4\SYS\global\db6\WINDOWS_AMD64\db6_clidriver\bin\db2app64.dll' successfully loaded
4 ETW000 57 0.484066
4 ETW000 [dev trc ,00000] Supported features: 21 0.486055
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 21 0.486076
4 ETW000 [dev trc ,00000] ..done 491 0.486567
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 21 0.486588
4 ETW000 [dev trc ,00000] Running with CLI driver. 329019 0.815607
4 ETW000 [dev trc ,00000] DB2 client driver version '09.05.0004' 266666 1.082273
4 ETW000 [dev trc ,00000] Connected to DB server type 'DB2/NT64' 3005 1.085278
4 ETW000 [dev trc ,00000] Connected to DB server version '09.05.0004' 513 1.085791
4 ETW000 [dev trc ,00000] Connected to 'SA4' as 'SAPSA4' schema 'SAPSA4' o.k. 20120 1.105911
4 ETW000 [dev trc ,00000] Connected: con_hdl=0 ; appl_hdl=381; appl_id="10.0.0.146.19717.091007113413"
4 ETW000 44 1.105955
4 ETW000 [dev trc ,00000] Database code page is ok. 37 1.105992
4 ETW000 [dev trc ,00000] Wed Oct 07 06:34:14 2009 52298 1.158290
4 ETW000 [dev trc ,00000] Database collating sequence is ok. 34 1.158324
4 ETW000 [dev trc ,00000] DB2_WORKLOAD=SAP is set in DB2 registry as required. 18173 1.176497
4 ETW000 [dev trc ,00000] CLI Insert Buffering is disabled on single partition databases. 10689 1.187186
*4 ETW000 [dev trc ,00000] DbSlControl: returning SAPDBHOST='mascon-sap2' 235 1.187421
4 ETW000 [dev trc ,00000] Connection 0 opened (DBSL handle 0) 24 1.187445
4 ETW000 [dev trc ,00000] DbSlControl: returning SAPDBHOST='mascon-sap2' 5737 1.193182
4 ETW000 Connected to database.*
4 ETW000 [dev trc ,00000] Disconnecting from ALL connections: 9176 1.202358
4 ETW000 [dev trc ,00000] Disconnected from 'SA4' 2033 1.204391
4 ETW000 [dev trc ,00000] Disconnected: con_hdl=0 ; appl_hdl=381; appl_id="10.0.0.146.19717.091007113413"
4 ETW000 44 1.204435
4 ETW000 [dev trc ,00000] Disconnected from connection 0 75 1.204510
4 ETW000 [dev trc ,00000] statistics db_con_commit (com_total=0, com_tx=0) 116 1.204626
4 ETW000 [dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0) 23 1.204649
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0000).
4 ETW000 date&time: 07.10.2009 - 06:34:14
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Oct 07 06:03:29 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.201)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid SA4
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 201
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 304
M
M kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 304) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
MX <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: running on host mascon-sap2
M calling db_connect ...
*C Registering callback for dynamic profile parameters
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] CON = 0 (BEGIN)
C &+ DbSlConnectDB6: unable to open file: '
mascon-sap2\sapmnt\SA4\SYS\global\dscdb6.conf'
C
C &+
C &+
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] (END)
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1451]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10561]*
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server mascon-sap2_SA4_00 on host mascon-sap2 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Oct 07 06:03:29 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10781
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 304) [dpnttool.c 333]
Thankyou
Chidam. -
Error in Start SAP system (Post Processing)
Hi.,
I got an error during IDES installation in the step "Start SAP system (Post Processing)".
The details of START.LOG is as follows
running sapstart.exe GML 00 xyz -wait
Start service SAP_00 on machine
OpenSCManager of
failed. Error#: 6
CreateNamedPipe for
\pipe\SAP_00 Failed, Extended Error #123
Start service SAP_00 on machine
OpenSCManager of
failed. Error#: 6
Start (StartSAPService) failed.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
Kindly help me out in this regard.
Thanks in Advance,
SridharSridhar,
Check the path for the profile (whether it is accessible or not). Just to make sure that system has been installed properly, you could try connection check to the database also.
Thanks.
regards,
Murali -
Problems starting SAP NetWeaver AS Trial Version
Hello Forum,
Here is the summary of problem that I am facing starting SAP Netweaver AS Trial Version (post suucessful installation). I am mentioning successful installation is because on the day of the installation, I could start the NetWeaver AS Server and login using user BCUSER and go into SE80 (Object Navigator). The trouble started appearing thereafter.
Here is the summary -
When I dont have MS loopback Adapter activated on my Laptop, I get the following in SAP MMC
The dispatcher process thread begins but haves a status - cannot connect to the message server
When I install and activate MS loopback Adapter on my Laptop, I get the following in SAP MMC
The Message Server and Dispatcher Starts Off, After a while (a minute), Dispatcher status turns to Message Server COnnection OK, Dialog Queue Time 0:00, after a While (a minute), it gives a message and stops. After this point Message Server is shown as running and Dispatcher is stopped.
I am attaching the dev_disp for reference. Obviously I think the problem lurking somewhere in the midst of Network Adapter Configuration - Please help me to resolve the same.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4808
Tue Oct 27 07:45:11 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4808) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
Tue Oct 27 07:45:15 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >UKCL515803_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F00040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F00040
DpShMCreate: allocated wp_adm at 04F01A28
DpShMCreate: allocated tm_adm_list at 04F032E0
DpShMCreate: allocated tm_adm at 04F03310
DpShMCreate: allocated wp_ca_adm at 052735A0
DpShMCreate: allocated appc_ca_adm at 05273A50
DpShMCreate: allocated comm_adm at 05273F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052F4DB0
DpShMCreate: allocated gw_adm at 052F4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052F4E20
DpShMCreate: allocated wall_adm at 052F4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Oct 27 07:45:16 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( UKCL515803) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >UKCL515803_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Oct 27 07:45:56 2009
MBUF state ACTIVE
ERROR => gateway (pid 5188) died [dpxxdisp.c 15372]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
killing W0-5072 (SIGUSR2)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
killing W1-3868 (SIGUSR2)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
killing W2-5148 (SIGUSR2)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
killing W3-5004 (SIGUSR2)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
killing W4-1640 (SIGUSR2)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
killing W5-4780 (SIGUSR2)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
killing W6-4108 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:06 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id 37
wake_evt_udp_now 1
wake events total 37, udp 9 ( 24%), shm 28 ( 75%)
since last update total 37, udp 9 ( 24%), shm 28 ( 75%)
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:11 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >UKCL515803_NSP_00 < (normal)
DpJ2eeDisableRestart
read msgserver-list from MBUF
DpMBufMod: name [UKCL515803_NSP_00 ], types 159 state 3 (0x0 0x0 0x0 0x0)
AdGetSelfIdentRecord: > <
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 1188 bytes
ALLOC local ca_blk 10000 (len 1188)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 38)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
Stop work processes
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:12 2009
NiISelect: TIMEOUT occured (1000ms)
wait for end of exclusive shutdown
[DpWpDied] W0 died (PID:5072 HANDLE:1616)
[DpWpDied] W1 died (PID:3868 HANDLE:1612)
[DpWpDied] W2 died (PID:5148 HANDLE:1608)
[DpWpDied] W3 died (PID:5004 HANDLE:1604)
[DpWpDied] W4 died (PID:1640 HANDLE:1600)
[DpWpDied] W5 died (PID:4780 HANDLE:1596)
[DpWpDied] W6 died (PID:4108 HANDLE:1592)
Stop icman
killing process (5208) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 7
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 14 bytes
ALLOC local ca_blk 10001 (len 14)
return errno (-17) to T7
errormsg without overhead: take mode 0
FREE local ca_blk 10001 (len 14)
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 4 sent data (wrt=14,pac=1,MESG_IO)
set status of T7 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1556 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1556
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=3)
NiICloseHandle: shutdown and close hdl 4 / sock 1556
NiBufIClose: clear extension for hdl 4
dp_tm_adm[7].stat = DP_SLOT_FREE
DpAMCancel: new state of T7/M0 = 0x19
DpAMCancel: set status of M0 to MODE_CANCEL
DpAMCancel: new state of T7/M7 = 0x8
DpAMCancel: set status of M7 to MODE_CANCEL
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 39)
wake_evt_udp_now 1, no dgram needed
created LOGOFF request for T7 U8 M0 !!
wait for end of work processes
[DpWpDied] W0 handle not set (PID:5072)
[DpWpDied] W1 handle not set (PID:3868)
[DpWpDied] W2 handle not set (PID:5148)
[DpWpDied] W3 handle not set (PID:5004)
[DpWpDied] W4 handle not set (PID:1640)
[DpWpDied] W5 handle not set (PID:4780)
[DpWpDied] W6 handle not set (PID:4108)
wait for end of icman
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:13 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:14 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:15 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:16 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:5208 HANDLE:1636)
DpStartStopMsg: send stop message (myname is >UKCL515803_NSP_00 <)
NiIMyHostName: hostname = 'UKCL515803'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Oct 27 07:46:17 2009
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1584 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1584 (pos=2)
SiSelNRemove: removed sock 1584
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 356 bytes
ALLOC local ca_blk 10001 (len 356)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 42)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1584
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4808) [dpxxdisp.c 10333]
Good Bye .....Hi Sunny,
Thanks for the reply. I checked NETSTAT command and none of the known ports used by SAP is occupied on my laptop.
Also, when I use NIPING - it gies me a familiar message WASNOTREACHED...
I have also attached my IPCONFIG /ALL Output, if somebody could help further.
Windows IP Configuration
1.0.0.127.in-addr.arpa
Record Name . . . . . : 1.0.0.127.in-addr.arpa.
Record Type . . . . . : 12
Time To Live . . . . : 600511
Data Length . . . . . : 4
Section . . . . . . . : Answer
PTR Record . . . . . : localhost
localhost
Record Name . . . . . : localhost
Record Type . . . . . : 1
Time To Live . . . . : 600511
Data Length . . . . . : 4
Section . . . . . . . : Answer
A (Host) Record . . . : 127.0.0.1
C:\Documents and Settings\utxk13>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : UKCL515803
Primary Dns Suffix . . . . . . . : drink.brew.beer
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sn.brew.beer
brew.beer
drink.brew.beer
scottishcourage.com
scottish-newcastle.co.uk
ghodom1.scottish-newcastle.co.uk
heiway.net
nl.heiway.net
Ethernet adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
Physical Address. . . . . . . . . : 00-22-FA-57-5E-D4
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : drink.brew.beer
Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Co
nection
Physical Address. . . . . . . . . : 00-26-55-11-C8-04
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : No
IP Address. . . . . . . . . . . . : 10.10.210.204
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.10.210.1
DHCP Server . . . . . . . . . . . : 10.10.160.167
DNS Servers . . . . . . . . . . . : 10.10.160.38
10.10.236.10
Lease Obtained. . . . . . . . . . : 27 October 2009 08:10:17
Lease Expires . . . . . . . . . . : 31 October 2009 08:10:17
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.10.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Regards
Tushar Kansara -
hiiii.....when i try to start SAP server its not geting start.....
may be problem related with dialog work process....
i attached DEV_W0 log file please help mi out
thanks
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun Feb 05 19:01:08 2012
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\A12\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\A12\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\A12\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 2172
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2172) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12784 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 034E0040, size: 1977824)
M DpShMCreate: allocated sys_adm at 034E0040
M DpShMCreate: allocated wp_adm at 034E0560
M DpShMCreate: allocated tm_adm_list at 034E3750
M DpShMCreate: allocated tm_adm at 034E3778
M DpShMCreate: allocated wp_ca_adm at 03680438
M DpShMCreate: allocated appc_ca_adm at 03684A88
M DpShMCreate: allocated comm_adm_list at 036861F8
M DpShMCreate: allocated comm_adm at 03686210
M DpShMCreate: allocated ca_info at 036B5010
M DpShMCreate: allocated wall_adm at 036B5018
X
X Sun Feb 05 19:01:09 2012
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=F:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPA12's password
C Connecting as /@A12 on connection 0 ...
C Attaching to DB Server A12 (con_hdl=0,svchp=075513DC,svrhp=07553644)
C
C Sun Feb 05 19:01:19 2012
C Starting user session (con_hdl=0,svchp=075513DC,srvhp=07553644,usrhp=0755BE24)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
C Try to connect with default password
C Connecting as SAPA12/<pwd>@A12 on connection 0 ...
C Starting user session (con_hdl=0,svchp=075513DC,srvhp=07553644,usrhp=0755BE24)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 957] [dbsh 0957 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server wagh_A12_00 on host wagh (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun Feb 05 19:01:19 2012
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2172) [dpnttool.c 346]hiii guys,
My problem still not solve..now paste DEV_disp log file...here show work process died...plz look that n give mi solution..
trc file: "dev_disp", trc level: 1, release: "620"
Wed Feb 08 17:06:12 2012
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
Wed Feb 08 17:06:13 2012
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 2412
***LOG Q00=> DpSapEnvInit, DPStart (00 2412) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Wed Feb 08 17:06:17 2012
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 11280 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 034E0040, size: 1976320)
DpShMCreate: allocated sys_adm at 034E0040
DpShMCreate: allocated wp_adm at 034E0560
DpShMCreate: allocated tm_adm_list at 034E3170
DpShMCreate: allocated tm_adm at 034E3198
DpShMCreate: allocated wp_ca_adm at 0367FE58
DpShMCreate: allocated appc_ca_adm at 036844A8
DpShMCreate: allocated comm_adm_list at 03685C18
DpShMCreate: allocated comm_adm at 03685C30
DpShMCreate: allocated ca_info at 036B4A30
DpShMCreate: allocated wall_adm at 036B4A38
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1207 MB
<ES> 1206 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( wagh) [dpxxdisp.c 9115]
Wed Feb 08 17:06:18 2012
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Wed Feb 08 17:06:58 2012
ERROR => W5 (pid 2712) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W9 (pid 2744) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W11 (pid 2760) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
my types changed after wp death/restart 0xbf --> 0xbb
Wed Feb 08 17:07:18 2012
ERROR => W0 (pid 2672) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 2680) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W3 (pid 2696) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 2704) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W7 (pid 2728) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 2736) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W10 (pid 2752) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W12 (pid 2768) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 2776) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
my types changed after wp death/restart 0xbb --> 0xa1
Wed Feb 08 17:07:38 2012
ERROR => W2 (pid 2688) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W6 (pid 2720) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W14 (pid 2784) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
my types changed after wp death/restart 0xa1 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Wed Feb 08 17:07:45 2012
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 2412) [dpxxdisp.c 7883] -
Hi All,
I have installed SAP Router before but this time when I installed and tried to start SAP Router its not getting started, and also not giving any error log file in SAP Router directory.
Please check the below command and correct me if I am wrong.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\sap_admin>cd \
C:\>cd SAPRTR
C:\SAPRTR>saprouter -r -S 3299 -K "p:CN=<MyRouterHOSTNAME>, OU=<Cust_NUM>, OU=SAProuter,
O=SAP, C=DE"
SAP Network Interface Router, Version 38.10
Compiled Oct 7 2009 03:08:09
start router : saprouter -r
stop router : saprouter -s
soft shutdown: saprouter -p
router info : saprouter -l (-L)
new routtab : saprouter -n
toggle trace : saprouter -t
cancel route : saprouter -c id
dump buffers : saprouter -d
flush " : saprouter -f
hide errInfo : saprouter -z
start router with third-party library: saprouter -a library
additional options
-R routtab : name of route-permission-file (default ./saprouttab)
-G logfile : name of log file (default no logging)
-T tracefile : name of trace file (default dev_rout)
-V tracelev : trace level to run with (default 1)
-H hostname : of running SAProuter (default localhost)
-S service : service-name / number (default 3299)
-P infopass : password for info requests
-C clients : maximum no of clients (default 800)
-Y servers : maximum no of servers to start (default 1)
-K [myname] : activate SNC; if given, use 'myname' as own sec-id
-A initstring: initialization options for third-party library
-D : switch DNS reverse lookup off
-E : append log- and trace-files to existing
-J filesize : maximum log file size in byte (default off)
-6 : IPv6 enabled
-Z : hide connect error information for clients
expert options
-B quelength : max. no. of queued packets per client (default 1)
-Q queuesize : max. total size for all queues (default 20000000 bytes)
-W waittime : timeout for blocking net-calls (default 5000 millisec)
-M min.max : portrange for outgoing connects, like -M 1.1023
-I address : address for outgoing connects, like -I 155.56.76.6
this is a sample routtab : -----------------------------------------
D host1 host2 serviceX
D host3
P * * serviceX
P 155.56.. 155.56
P 155.57.1011xxxx.*
P host4 host5 * xxx
P host6 localhost 3299
P host7 host8 telnet
S host9
P0,* host10
KP sncname1 * *
KS * host11 *
KD "sncname "abc" * *
KT sncname3 host11 *
deny routes from host1 to host2 serviceX
deny all routes from host3
permit routes from anywhere to any host using serviceX
permit all routes from/to addresses matching 155.56
permit ... with 3rd byte matching 1011xxxx
permit routes from host4 to host5 if password xxx supplied
permit information requests from host6
permit native-protocol-routes to non-SAP-server telnet
permit ... excluding native-protocol-routes (SAP-servers only)
permit ... if number of preceding/succeeding hops (SAProuters) <= 0/*
permit SNC-connection with partnerid = 'sncname1' to any host
permit all SAP-SAP SNC-connections to host11
deny all SNC-connections with partnerid = 'sncname "abc'
open connects to host11 with SNC enabled and partnerid = 'sncname3'
first match [host/sncname host service] is used
permission is denied if no entry matches
service wildcard (*) does not apply to native-protocol-routes
C:\SAPRTR>
Rg
RameshHello my friend
It could be certificate didn't import properly or routtab content is not correct. Here's your checklist:
Creating the certificate request
1) As user <snc_adm> set the environment variables SNC_LIB and SECUDIR
2) Change to the alias SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant u201CDistinguished Nameu201D.
3) Generate the certificate Request with the command:
sapgenpse get_pse -v -r certreq -p local.pse u201C<Distinguished Name>u201D
You will be asked twice for a PIN here. Please choose a PIN and document it, you have to enter it identically both times. Then you will have to enter the same PIN every time you want to use this PSE.
4) Display the output file "certreq" and with copy&paste (including the BEGIN and END statement) insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name.
5) In response you will receive the certificate signed by the CA in the Service Marketplace. Copy&paste the text to a new local file named "srcert", which must be created in the same directory as the sapgenpse executable.
6) With this in turn you can install the certificate in your saprouter by calling:
sapgenpse import_own_cert -c srcert -p local.pse
7) Now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user_for_saprouter>, the credentials are created for the logged in user account).
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
Note: The account of the service user should always be entered in full <domainname>\<username>
8) This will create a file called "cred_v2" in the same directory as "local.pse"
9) Check if the certificate has been imported successfully with the following command:
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be:
CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
10) If this is not the case, delete the files "cred_v2"and "local.pse" and start over at Item 3.
Additional actions necessary before you can start SAProuter
1. Check if the environment of the user running SAProuter contains the environment variable SNC_LIB and SECUDIR
2. Start the SAProuter with the following command line (to start the SAProuter as a Windows service, please follow the steps described in SAP note 525751):
saprouter -r -S <port> -K "p:<Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
3. The corresponding file "saprouttab" should look like:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
SNC-connection from SAP to telnet in your network
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P * 194.39.131.34 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your IP> <port>
Regards,
Effan
DON'T KNOW WHY THE FORMAT MESSED UP, PLEASE USE QUOTE ORIGINAL IN REPLY MODE TO READ THE CORRECT FORMAT CONTENT. SORRY!
Maybe you are looking for
-
Has anyone tried pre-compression to improve image quality?
I am having a hard time creating a usable disk image in iDVD from my 1 hr 45 min FCE movie. Portions of the video are extremely pixelated, usually the grainier, lo-light clips. Since I don't have Compressor or DVD Studio Pro to use to get more contro
-
How can i connect mac book pro to appel tv3
How can i connect mac book pro to appel tv3
-
Hello, hoping someone might be able to help on a probably simple, but puzzling problem I'm having. I have a button menu pretty much completed; however, when I publish it, the small numbers (01-06) on the left do not appear. I've attached links to how
-
Cannot send mail "recipient rejected because server does not allow relaying"
Just went to Verizon store with new Iphone4. They tried, but didn't help. I can receive my email, but cannot reply or compose and send msgs. The message says, "Cannot send mail. A copy has been place in your Outbox. The recipient xxxxxx was rege
-
I have downloaded the iOS6 software on my iPhone4 and now I can't delete/move or create new mail. The bar at the bottom has disappeared. Does anyone have any solutions?