Start screen--date vs. music controls?

My mom did something to her iPhone 5s (with latest iOS updates). When she wakes the phone, it displays the reverse/pause/FF music controller buttons in place of the time. Which drives her nuts.
I figure she accidentally used a gesture which changed this, but I can't reproduce the problem on my iPhone 5 or figure out how to fix it....anybody know? I'd really appreciate any guidance you can give.
Thanks

knitterm wrote:
My mom did something to her iPhone 5s (with latest iOS updates). When she wakes the phone, it displays the reverse/pause/FF music controller buttons in place of the time. Which drives her nuts.
I figure she accidentally used a gesture which changed this, but I can't reproduce the problem on my iPhone 5 or figure out how to fix it....anybody know? I'd really appreciate any guidance you can give.
Thanks
That means she was listening to music/videos the last time she was on the phone.
Either find the video or music and stop it or do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release.

Similar Messages

HT5595 Lock screen and Bluetooth Music controls do not work

Immediately after installing IOS 7 (on about 9/19), I noticed that the lock-screen access to Music was not working. I could change the volume and timepoint of a song that was already playing, but the play/pause, forward and rewind buttons did not work. Some posters suggested that a restore would fix the problem, so I restored and am now at 7.0 (11A465). After the restore, the controls worked for a day or two, but stopped working again. And I've noticed that the same functions are not working with Bluetooth in my car.
BTW: the restore did not preserve the set of downloaded e-mail. Those messages are gone, so far as I can tell.

Mine work. Depending on the app being used, it may take several seconds for the play button to work. After that initial delay, you should be good to go.

How to delete the populated data in the control screen of XK02 transaction

In the vendor master ( XK01/2/3) "Control screen " we have some user defined fields with data already populated into those fields. Now, the user is asking to delete the data which is already populated for a particular purchaging Organization. How to do that.
Ur help wil be highly appreciated.

Hello,
If the data is like after every C5* or C6* there is an underscroll sign (_), then below code will work in start routine:
Data: wa_source_package like line of source_package,
          itab_sp type standard table of tys_SC_1,
          a(6) type c,
          b(10) type c.
loop at source_package into wa_source_package.
   split wa_source_package at '_' into a and b.
   if strlen( a ) = 7.
      append wa_source_package to itab_sp.
   endif.
endloop.
refresh source_package.
source_package = itab_sp.
Regards,
Shashank

Stuck music controls in lock screen iOS 8.1.3

For some reason I have yet to analyze, my music controls display on my lock screen when there is no music or video app playing. The controls are suck in "play" mode with the pause button visible but tapping it has no effect. The clock and date do not display and I can only seem to rest the unit by performing a hard restart.
I am running a Verizon 64Gb iPhone 6+ and may take a wild guess that it has something to do with the YouTube app.

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

HT5858 When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

Not really sur easy you would be having that problem. Mine works. You might try RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). Then try again and see if it makes a difference

How To Disable Music Controls and Camera Icon On Lock Screen?

Good Afternoon / Evening -
I have an iPhone 4 running iOS5.
I would like to disable the Music Controls and Camera icon that appear on the lock screen. Is there a way to do this? I believe this new functionality is causing battery issus with my iPhone 4.
Any advice / information is appreciated!
Thanks,
Rick

rockmyplimsoul wrote:
RPPonti wrote:
I would like to disable the Music Controls and Camera icon that appear on the lock screen. Is there a way to do this? I believe this new functionality is causing battery issus with my iPhone 4.
No, this feature is built into iOS 5 and can't be altered.
The only way this could cause a battery issue though is if you accidentally double-tap the Home button and then also tap either the Play button to start music or the Camera icon to launch the camera app. Not impossible, but not likely either. Battery issues might be improved through a reset or complete iPhone restore.
I Have an iPhone 5 & the music keeps getting activated when its in my pocket.. i actually have to take it out of my pocket if im moving aroung.. or in a meeting.. its SO Annoying.. my first iPhone.. and im blown away that even on the LOCK screen.. you cant lock the features on the phone.. does this sound like a third grader designed this thing or what.. why have a lock screen??? IF it Doesn't lock??????
I can only pray that this issue is resolved soon.. otherwise this is my last & only iPhone.. what a piece of junk! & a huge waste of money... all these stupid 'apps' & games.. seem to be the priority.. & its still incable of being transported in my pocket without playing music & taking pictures..***
ANY HELP would be greatly appreciated!

On my iphone4s, music control do not show up on the screen and the screen cannot be rotated.

On my iphone4s, music control do not show up on the music screen and the screen cannot be rotated.

Couple of clarifications, the rotation lock is not set. The controls are visible for video and other apps. Only the music screen does not rotate or show the controls.

The volume controls will not show up in the music app or the lock screen music controls. What do I do?

The volume controls will not show up in the music app or I the lock screen music controls. What do I do?

OMG......THANK YOU THANK YOU......I been reading articles after articles and nothing was working......tryed the Crtl+S and there it was. I can not thank you enough......I appricate it Can not believe it was that simple. I am one happy person again.....

Start screen does not exist in batch input data

I'm using .NET Connector calling Rfc_Call_Transaction funtion throught a proxy, i stablished all the params as you can see in the code below, but i get the message cited in the subject 'Start screen does not exist in batch input data'.
What do you think is happening? or Where can i get the samples needed for perform this type of request?
        private BDCDATA FillBDCDATA(string Program,
                                    string Dynbegin,
                                    string Dynpro,
                                    string Fnam,
                                    string Fval)
            BDCDATA st_DATA = new BDCDATA();
            st_DATA.Program = Program;
            st_DATA.Dynbegin = Dynbegin;
            st_DATA.Dynpro = Dynpro;
            st_DATA.Fnam = Fnam;
            st_DATA.Fval = Fval;
            return st_DATA;
        private void button3_Click(object sender, System.EventArgs e)
            SAPProxy proxy = null;
            try
                proxy = new SAPProxy("ASHOST=" + txtHost.Text +
                    " SYSNR=" + txtSysnr.Text +
                    " CLIENT=" + txtMand.Text +
                    " LANG="   + txtLang.Text +
                    " USER="   + txtUser.Text +
                    " PASSWD=" + txtPass.Text);
            catch(Exception excpt)
                txtMsg.Text = excpt.Message;
            if (proxy == null)
                return;
            BDCDATATable tblBDCDATA = new BDCDATATable();
            MESSAGEINF infMessage = new MESSAGEINF();
            //BDCDATA st_DATA = new BDCDATA();
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BDC_OKCODE", "/00"));
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BPDY-BLDAT", "30.12.2004"));
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BPDY-VERSN", "0"));
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "FMPS-FIKRS", "ente"));
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BPDY-JAHR", "2005"));
            proxy.Rfc_Call_Transaction("FM9J","", out infMessage, ref tblBDCDATA);
            txtMsg.Text = infMessage.Msgtx;

Jose,
I imagine you are passing, for the Dynbegin parameter of the private method FillBDCDATA, invalid values.
Why don't you try this way:
tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "X", "0111", " "," "));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BDC_OKCODE", "/00"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BPDY-BLDAT", "30.12.2004"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BPDY-VERSN", "0"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "FMPS-FIKRS", "ente"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BPDY-JAHR", "2005"));
I hope I could help you.
Regards,
Daniel Carvalho

Troubleshoot the ITOUCH as to why music controls stay on screen

Help me trouble shoot my ITOUCH as to why the music control remains on the screen when I switch between programs.
The box contains arrow in the middle pointing to the right (fast rewind and fast rewind arrows beneath)Large CLOSE and MUSIC buttons at the bottom. It appears when I try to put the home button off or switch between applications and I can't get it to stop coming on.

According to another post, if you press the home button twice, as opposed to a "single" time, the music buton will appear so you can control your music. Try hitting the button only once and see if the controls appear. My dilemma was the exact opposite and I wanted to know how you actually get the controls to appear, so hopefully this works for you.

Lock screen music controls not always working?

when double clicking the home button, it brings up the music controls as expected. the problem: if I hit pause and leave the phone alone for more than about 5 minutes, I can no longer access music controls by double clicking. it wasn't this way before ios7. was this change intentional it or is this a bug?
(I know I can play music through the control center by swiping up from the lock screen, but that's not what this question is about.)

I just need somebody to tell me if this is happening on their ios7 device. even if you don't have the answer to how to fix it. I want to know if this is a bug or if it was intentional.

I just downloaded ios 7 and when I'm recording video the camera screen goes black and doesn't record anything. Also in control centre music control doesn't work sometimes. It's been three days.

I just downloaded ios 7 and when I'm recording video the camera screen goes black and doesn't record anything. Also in control centre music control doesn't work sometimes. It's been three days.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How to Populate Internal table data to Table Control in a Report Program

Dear All,
       How to Populate Internal table data to Table Control in a Report Program? It is a pure report program with out any Module pool coding involved, which is just used to display data. Till now it is being displayed in a report. Now the user wants the data to be displayed in a table control. Could someone tell me how to go about with this.
Thanks in Advance,
Joseph Reddy

If you want to use a table control, you will need to create a screen.
In your report....
start-of-selection.
perform get_data. " Get all your data here
call screen 100. " Now present to the user.
Double click on the "100" in your call screen statement. This will forward navigate you to the screen. If you have not created it yet, it will ask you if you want to create it, say yes. Go into screen painter or layout of the screen. Use the table control wizard to help you along the process. It will write the code for you. Since it is an output only table control, it will be really easy with not a lot of code.
A better way to present the data to the user would be to give it in a ALV grid. If you want to go that way, it is a lot easier. Here is a sample of the ALV function module. You don't even have to create a screen.
report zrich_0004
       no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
      matnr type mara-matnr,
      maktx type makt-maktx,
      end of imara.
* Selection Screen
selection-screen begin of block b1 with frame title text-001 .
select-options: s_matnr for imara-matnr .
selection-screen end of block b1.
start-of-selection.
perform get_data.
perform write_report.
* Get_Data
form get_data.
select mara~matnr makt~maktx
            into corresponding fields of table imara
              from mara
               inner join makt
                 on mara~matnr = makt~matnr
                    where mara~matnr in s_matnr
                      and makt~spras = sy-langu.
endform.
* WRITE_REPORT
form write_report.
perform build_field_catalog.
* CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            it_fieldcat = fieldcat
       tables
            t_outtab    = imara.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic    = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname   = 'IMARA'.
fc_tmp-outputlen = '18'.
fc_tmp-col_pos    = 2.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic    = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname   = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-col_pos    = 3.
append fc_tmp to fieldcat.
endform.
Regards,
Rich Heilman

It's not showing the play or next song buttons on locks screen when the musics are played

it's not showing the play or next song buttons on locks screen when the musics are played

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Windows Embedded 8.1 Industry Pro - Start Screen Layout Deployment GPO

We have recently finished signing our Microsoft Customer License Agreement (CLA) for reselling Windows on a diagnostic tool for our industry. We developed our software with Windows Embedded 8.1 Industry Pro from an MSDN source. Installed from MSDN, configured,
put 20 mobile devices in the field for testing, and pushed updates to them. As a part of this we were able to remotely modify the start screen and add new icons for the newly installed software. Now that the MS CLA is complete we have received the official
Embedded 8.1 Industry Pro OPK from Microsoft Ireland and recreated our setup. So far all but one function works as expected. We are finding that we are unable to modify the Start Screen Layout via XML file or any other method as we did with the MSDN setup.
I have reviewed HKLM/Software/Microsoft/Windows NT/CurrentVersion for build and product ID information to find the MSDN install and the OPK install both show the same information other than install date. The DigitalIDs are different though.
We needed the Embedded version for the Unified Write Filter and after being able to modify the start screen layout with our MSDN copy all looked great. After not being able to modify the start screen layout with our official OPK copy of 8.1 we've done additional
searching to find: https://social.technet.microsoft.com/Forums/en-US/71f0be7a-43af-4ca3-a068-f99b92217e2a/windows-81-start-screen-layout-gpo?forum=w81previtpro Which plainly says that 8.1 PRO is NOT able to do this.
Is this correct?
If so why might our MSDN installation have worked while the OPK installation does not?
Why wouldn't an EMBEDDED INDUSTRY PRO version not allow for such a simple function? People using this version I would image would require the most flexibility and customizable options versus another, no?
If this advanced and highly modifiable version of 8.1 pro cannot do this then how might it be recommended to accomplish this goal?
Please help as this may soon push our development out much further.
Thanks in advance,
Joey

Hi HVACjoe
For general system start screen control is supported in the Windows 8.1 Enterprise operating system, the Windows RT 8.1 operating system with sideloading enabled, and in all editions of the Windows Server
2012 R2 operating system. Start screen control is not supported in the Windows 8.1 Pro operating system.
As Tripredacus mentioned that Windows Embedded support is not typically handled on the public forums and Microsoft Developer Network distributes special editions of Windows for testing and development purposes, those are not general purpose licenses and
the validity of the key has a time limit, we could not access resources from MSDN for test.
We suggest you look for help from your Embedded Partner or MSDN forum
https://social.msdn.microsoft.com/Forums/en-US/home
You could get more information from following link about start screen lay out.
https://technet.microsoft.com/en-us/library/dn467928.aspx
Regards

Start screen--date vs. music controls?

Similar Messages

Maybe you are looking for