Start SOUND BLASTER LIVE recording from the command li

Hi everybody!
I have a Sound Blaster Li've card and have installed Creative Wave Studio ver 4.06
I leave the computer turned on all night long. What I would like to do is find a way that
the Sound Blaster Li've card could start and a way to stop recording automatically at
a set time; for example start recording a radio show at 4am and stop recording at 5am.
( For now I am using Windows task scheduler to call up a program I wrote to begin
the recording by issuing keystroke: "control r" but I am having problems stopping it by
issuing "control t")
Could someone tell me if there is a way through command line to start and stop?
Perhaps just writing a batch file?
Thanks,
Frank

Well, I found that one of the problems was the screen saver kicked in and would
keep certain software from getting its Windows Message through to the acti've
window. So now I am experimenting with no screen saver.

Similar Messages

EAX Effects That used to be on Sound Blaster Live Gone from Audigy

[size="4" color="#0000ff" face="Century">?[size="4" color="#0000ff">Greetings,[size="4" color="#0000ff">?[size="4" color="#0000ff">I now own a Audigy SE for my Small Form Factor PC, The last time I had a creative Card it was a Sound Blaster Li've 5.[size="4" color="#0000ff">?[size="4" color="#0000ff">There use to be a ton of EAX Effects settings you could choose from to record yourself like a chipmunk,male to female,female to male,zeus, and many more. However these dont seem to be available in the EAX Software I have. Where can I get more effects to download that I can add to the existing EAX Control Panel?[size="4" color="#0000ff">?[size="4" color="#0000ff">Thanks

Let's make this easy.
First download and install Driver Cleaner Pro; http://www.softpedia.com/get/Tweak/Uninstallers/Driver-Cleaner-Professional.shtml
Then clean out all creative and creative lite drivers then delete any folder in your system that has the name creative on it (usually find these with a quick File or Folders search in the start menu. Then download and install Crap Cleaner; http://ccleaner.com/, go a head and clean out files and do scan of the registry with ccleaner and remove unneeded reg stuff. Now reboot. One more thing, if you still see the "Device Control" icon in the control panel you must remove it's corresponding .cpl file in the "\windows%base%\system32\" folder.

How to start firefox in safe mode from the command line

This is for Window XP, firefox 19

Hello jjfirefox77
"C:\Program Files\Mozilla Firefox\firefox.exe" -safe-mode
thank you

Sbl-soundfonts: soundfont midi lib for sound blaster live

Something I needed for midi tests of my sound blaster live card.
The first soundfont file was suggested as the best general soundfont library available for free (8MB). The second is from my sb live install cd (4MB). If you only want the first one remove second source file and second md5sum. You will need asfxload from awesfx package (http://bbs.archlinux.org/viewtopic.php?p=77155) to load the library.
More info and soundfont libraries are available at:
http://www.linux.com/howtos/MIDI-HOWTO-10.shtml
http://www.euronet.nl/~mailme/index4.html
http://www.synthzone.com/soundfont.htm
http://alive.singnet.com.sg/musician/
http://listen.to/sblive
http://www.indezine.com/products/sound/soundfonts.html
http://www.soundfont.com/
http://alsa.opensrc.org/index.php?page=asfxload
http://alsa.opensrc.org/index.php?page=emu10k1
http://alsa.opensrc.org/index.php?page= … ntHandling
pkgname=sbl-soundfonts
pkgver=1.0
pkgrel=1
pkgdesc="SoundFonts files for SoundBlaster Live!"
url="http://www.creative.com"
depends=('awesfx')
source=(http://www.alsa-project.org/~james/sound-fonts/8MBGMSFX.SF2 CT4MGM.SF2)
md5sums=('568ddfaa56db2bb45fc96e28dcc711ad' '1652dfbefe914bdb8dc03afc0c76f619')
build() {
cd $startdir/src
install -d -m755 $startdir/pkg/usr/share/soundfonts
install -m644 *.SF2 $startdir/pkg/usr/share/soundfonts

I recently answered about the same question:
If you?use Vista or Windows7, then there is no official driver. You can only use alternati've drivers like Vista Support Pack by Daniel_K or the one from KXProject (better). But if you have more than 2 gigs of memory installed or an x64 OS, then both drivers will be half-working (as far as I remember, Daniel's driver won't work with more than 2 Gb of memory installed in any OS, and with KX-driver there will only be a problem with MIDI playback with more than 2 Gb AND x64 Win7).

How to rerieve records from the table starting with character 'D'

Hi Folks,
How to get the records from the table starting with character 'D'.
Select Max (fld1) fron tab1 into tab1-fld1 where fld 2 = l_fld2 and starting character of fld(1) is 'D'.
last record in the table starting with character 'D'
How can i do that??
Pl explain.
Thanks,
Matt

Hi,
Select Max (fld1) fron tab1 into tab1-fld1 where fld 2 = l_fld2 and starting character of fld(1) is 'D'.
Select MAX (fld1)
From tab1
into table itab
where fld 2 = l_fld2
and fld1 like 'D%'.

Sound recorded from the phone through in-line to Zen V is weak, not loud eno

I wonder if anyone is trying to achieve the same result with more success. When I record from the phone through a cable to the Zen V and transfer the recording to the computer the sound is not loud enough to be easily understood, despite the fact that on the Zen with the earphones the quality is satisfactory. Can someone help get a louder recording into the computer?TIA

I have tried that. I had listened to the headphones to monitor the sound. It is the pre-set recording level programed in the player. There should be a way to back it down if needed or set the pre-prog. level to a lower setting on the line-in mode. So far Creative is working with me via e-mail. Hopefully they can remedy my situation. Somehow I think I am not the only one with this problem.

Starting a WSAD server from the command prompt and not from the IDE UI

Hi,
is there a way to run the WSAD server from the command prompt instead of using the IDE UI . i have tried starting the server from the Directory i have installed WSAD " D:\Program Files\IBM\WebsphereStudio\runtimes\base_v5\bin>startServer.bat" but it gives the Following error " The system cannot find the path specified." i am working . do i have to specify the workspace that i am currently working on

to see if the network adapter has registered with OPMN run: opmnctl status
the 6200 message is a timeout which can be set in opmn.xml, the reports server(s) and other processes managed by OPMN should still stop.
Try opmnctl stopall or opmnctl shutdown
Does the timeout shows up regularly ie can you repeat it?
After the stopall or shutdown try to start everything up again and try to stop the single reports server process again.

Starting the nzrView in listen mode from the command line...

I want to be able to start the nzrViewer in listen mode when I log into windows and then be able to accept an invite for a collaboration session. When I added a shortcut to the "nzrViewer.exe /listen 5550" to my Startup Folder, it launches the Remote Listener just fine, but when I someone invites me to collaborate a Remote Session, I get an error message "Ticket not provided for Rights Authentication."
I believe that the problem is when I launch the Viewer from the command line, I'm not authenticated to the Zen server, so it can't verify my Rights.
Does anyone have a better way to do this? Or do I have to log into ZCC and launch the "Remote Management Listener" from there?

Originally Posted by mcdonalj
I want to be able to start the nzrViewer in listen mode when I log into windows and then be able to accept an invite for a collaboration session. When I added a shortcut to the "nzrViewer.exe /listen 5550" to my Startup Folder, it launches the Remote Listener just fine, but when I someone invites me to collaborate a Remote Session, I get an error message "Ticket not provided for Rights Authentication."
I believe that the problem is when I launch the Viewer from the command line, I'm not authenticated to the Zen server, so it can't verify my Rights.
Does anyone have a better way to do this? Or do I have to log into ZCC and launch the "Remote Management Listener" from there?
There has been some updates in the documentation for 10.2.2 about remote control from cmd line.
Check it out, maybe there is a solution to your problem.
http://www.novell.com/documentation/...a/bcfqcen.html
http://www.novell.com/documentation/...a/bn8ptx7.html
Thomas

Starting the 10G server from the command line

How do I start the 10G APP SERVER FROM THE COMMAND LINE?

http://download-west.oracle.com/docs/cd/B10464_01/core.904/b10376/start.htm#1007557
Documentation library for Application Server 10g. It has a section on starting/stopping

The frontal panel of SOUND BLASTER LIVE 5.1 works, whit Audigy 2

They estan to me selling a frontal panel of card SOUND BLASTER LIVE 5, worked in the
AUDIGY 2 ZS so that my AUDIGY did not bring the frontal panel.
Please.....
Atentamente Jose Gonzalez (Venezuela)

not quite sure how much this goes contrary to the interest of this Forum :smileytongue: but according to this it works:
http://www.driverheaven.net/showthre...79&page=2&pp=5
make sure to read the whole thing
cherio
PHYNESSE

?Using Sound Blaster to record ta

I have a Sound Blaster 24-bit external device ( Model: SB0490) that I am trying to configure,?I want to record tapes and?eventually transfer the audio files to my husband's IPod. I have used the device before to record tapes and LP's and that worked well. The system is the same and so are the different componets. I am using a simple tape player that only has an earjack plug for the out.
I can not get the device to recognize the sound from the tape player, the level guide stays flat and does not show any changes. I do make sure the box is checked to allow for the level to be seen visually.
When I did?the recording?before I know that I had to figure out the set-up as the paper documention?and support files did not cover the needed configuration. Yet I did figure it out at that point. I do not?remember now how I connected everything then. The speakers are working in my normal set-up, I have a simple set-up of 2 speakers. I have hooked them to the "front" plug and tried putting the tape player in both the "mic-in" and "line in" outlets and neither plug registers a sound in the level gauge. I believe that when I did it before that I had to use a splitter, this may be due to needing to listen on a head-set so that I did not disturb others while I was recording. I have tried so many configurations and still can not seem to enable Sound Blaster correctly. Even when I can hear the tape player the system still does not register on the gauge. I have tried adjusting both the sound level manually on both the tape player and Sound Blaster with no difference. I should add that I am trying to tape a booktape which uses a dual outlet plug adapter as each side of the tape has two tracks. After the taping of one track I change to the other outlet and record the other track. I don't know that this would make a difference but it may. I am a novice when it comes to this so I'm probably over-looking something simple in the set-up. And although I figured it out before I am at a loss now. If anyone has?a solution?I would appreciate a reply. Thanks much!?

jutapa - Thanks for the question on the ITunes. The tape player I am using is not a good tape player, i.e. it doesn't have any way to adjust things like the sound quality, etc. Just a plug for the earphones, whether I want to play a CD, tape or radio.
I am using book tapes on the tape player as my item to record and I don't have another tape player available. Wondering if something in Windows programs was overriding the sound Blaster device I tried to forego?the Sound Blaster and plug?the player?straight into the computer and the computer does not recognize it all. Likely because it's not a digital device. I did use?the radio setting last night?to see?if there was any difference, the same lack of sound happened. When I recorded before I didn't have too much problem figuring this all out - listening on earphones while I was taping - was the biggest thing. I?believe I used a splitter for that. I use Itunes for CD's all the time with no problems. In?the current?situation I get sound in my ear-micphones. ?Maybe the problem is in the ear-mic phones - perhaps I used a different earphones before? I think I have used up options with the cords, all kinds of Rube Goldberg configurations starting out with what seemed to be logical ..... my thinking was that sooner or later something?is bound to work. I checked all the levels and the volume is set?at full for mic, line-in, etc. I'm going to hit Radio Shack later today and see what they have in cords - maybe my cords are damaged in some fashion. Again thanks for your comment. If I figure out the problem I will post the solution in case anyone else runs into the problem. Thanks again.

Can't install drivers for sound blaster live Telling me there isn't a sound blaster card install

I am doing a fresh install of xp on a machine. This machine had no hardware issues before I formated the dri've and re-installed windows xp.
Everytime I go to install the drivers for the sound card I get an error message telling me that setup cannot find a sound blaster card installed on the system?
I even pulled a known working li've card from the machine I have downstairs. Put the card in and started up the machine. The driver pack is still telling me there is no card installed. I've tried three different pci slots as well.
I even went as far as re-installing windows xp without service pack 2 integrated and even that didn't help!!!
Is there some kind of fix that I am missing?

the unipack download from creative will not work. first, try asking around if somebody else has the same 5. creative card as yours. the only solution for your problem is to use the installation cd that came with your creative card. I lost mine so i went to a pc repair shop and inquired if they have a copy of such cd - they normally do.
. you need to remove all the programs concerning creative from add remove programs. 2. shut down, and remove the sound card. 3. turn the pc on and let windows boot normally. install the the softwares and drivers using the cd that came with the box. 4. shut down and install the sound card 5. turn on the pc. windows will find a new hardware and will find the right drivers bec you have previously installed them. There is absolutely no need to reformat your hard dri've.

BA7500G + Sound Blaster Live! 24-bit + Windows 2k = no sound

Similar to the thread for Win XP, I have inherited a BA7500g speaker system, and purchased a new Sound Blaster Live! 24-bit card for my Win2k system. Cannot get the speakers to work, although the speaker test works from the BA control unit. Noticed the digital audio input cable is color coded, and I don't have the original card that matches this scheme. Could this be the problem?

I have installed a new (not used) Soundblaster Audigy SE and BA7500G speakers and I'm running XP Pro. I'm getting no sound even when I change to Digital Out only? Not sure what to do? Is this sound card not compatible with my speakers? Do I need to purchase the Digital I/O Module that Creative is currently not in stock? I can find the Digital I/O module on Ebay if need be but not sure that's the solution. Please help!
Thanks,
Kevin

Both Sound Blaster Live 5.1 and Integrated Sound Card Does Not W

Hi! I just installed a new mother board and cpu. Its an ECS 755-A2 mother board with a 3200+ AMD Sempron/64-bit CPU. It's not the best, but i was trying to save money.Before, I had a soyo and a 2800+ AMD Athlon XP and i had the Sound Blaster Li've 5.. Now with this ECS mb, the sound card doesn't get detected anymore, even in device manager. I downloaded the new driver for the Sound Blaster Li've 5. from their official website and when I came to install it... it said that there were no Sound Blaster cards detected on my computer even though it was securely pushed in IN a pci slot!!Then I decided that I don't need sound blaster so i installed the driver for the integrated sound card on my mb (realtek AC-97) and everything LOOKS fine according to their program and the control panel (sound and audio options) but i dont receive any sound from anything at all. I was planning on buying a NEW sound card but then i decided to test this Sound Blaster Li've 5. on my bro's computer. Ironically, it was detected on his .2 ghz AMD Athlon Thunderbird and now i'm puzzled as why it wasn't detected on mine.What solutions have I tried?I installed numerous drivers for both the sound blaster and the integrated sound card repeatedly and there wasn't any hope. I re-installed the OS twice (I'm willing to do a third though)I don't know what else I can try.. can anyone help and please don't say the mother board :[?Specs:3200+ AMD Sempron/64-Bit CPU (2.2 ghz)ECS Elite Group 755-A2 Motherboard52 DDR RamGeforce 4 Ti4200 Video Card

If you had change the motherboard then I suggest you format your harddisk and start from a fresh install of the OS and not just reinstall the OS.

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

First off your operating system version is obsolete and not being updated for security issues from Apple.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
So at least you need to upgrade to 10.6.8, and that will make your machine secure again.
However if you decide to upgrade further to 10.7 or 10.8, be forewarned your PPC based software of old is not going to work any longer. and your machine may require more RAM.
Check here to see and download the free MacTracker to see your machines true RAM potential and specs. There are videos online at YouTube, it's really easy to install yourself.
http://roaringapps.com/apps:table
I checked out the z-5500, apprantly the optical out shouldn't be a problem, however the surround sound decoding is a problem as the Mac doesn't do it, just passes it through for decoding on a receiver via the optical out port if your Mac has one.
Use the free MacTracker to find out or when you upgrade OS X, there is a option in the System Preferences > Sound.
https://logitech-en-ap.custhelp.com/app/answers/detail/a_id/9693/section/trouble shoot/crid/409/lt_product_id/224/tabs/1,3,2,4,5/cl/sg,en
The Sound Blaster Live 24 bit doesn't do Dolby 5.1 according to Wikipedia. More info on it is here.
http://support.creative.com/Products/ProductDetails.aspx?catID=1&prodID=10702&pr odName=Live!%2024-bit%20External&CatName=Sound+Blaster
If it's able to accept optical toslink cable from the Mac's toslink stereo mini port (if it has optical output) and then send that to the z-5500 via the analog speakers, then you should be fine.
I'm afraid you'll have to do some more digging to get it to work.
The only surround sound your going to get is by playing DVD movies that have it, then it can't have Dolby 5.1 as the Live 24 bit can't decode it.
So do your research on what surround sound formats the Live 24 can decode, then compare your DVD collection for those movies that have it, then get it all connected and enable it on the movie preferences at the menu.
Good Luck

Start SOUND BLASTER LIVE recording from the command li

Similar Messages

Maybe you are looking for