Start/Stop control for itunes

I am in a band and I use itunes to playback my drum tracks. Anyone know of a switch (I'm visualizing a USB start/stop footswitch) which I could use to stop itunes playing? Thanks for your help. Brett

Oh, ya. I know all about that problem. Sorry it is not good news. You will probably need a new phone. Moisture has gotten into the button or the dock port and shorted the home button contacts. Replacing the button will not fix it since it is the contacts on the board that are shot. You can Google fixes for iPhone home button, for more details. There is a rough work around fix of adding a few drops of rubbing alcohol on the button and pressing it 15 times then blowing it out with compressed air. This helped a bit, but did not fix the problem.
Happened to me while I was running a bit of sweat must have gotten in. There and it started happening to me.

Similar Messages

How do I change the start/stop time for multiple songs not just one song at a time?

How do I chnage the start/stop time for multiple songs not just one song at a time?

I don't think you can in iTunes.
Multiple editing in Get Info does not offer an option to change start/stop times.

Separate Start/Stop times for a single song file

I am trying to create some playlists for different moods e.g. calm, happy, upbeat etc.
Now, my problem is this. I have some songs that have more than one mood within them, and I would like to set different start/stop times for the one song file.
I would like to be able to set different start/stop times in each playlist and not affect the start/stop times for the file in the music library.
Thanks in advance to anyone who can help!

The only way to do this is to make a duplicate copy of the song for your playlist and adjust the times for the duplicate.

Music Start/Stop Times with iTunes Match causes iOS Music App to glitch

I set Start Time and Stop Time values for my music in iTunes to crop off non-music parts of tracks, but the Start/Stop Times cause the iOS Music app to glitch out when the track streams via iTunes Match. If a track has a Start Time set, the track will get stuck, and repeat the first fraction of a second of the track over and over, seemingly for the amount of the Start Time. And if the Stop Time is set, the NEXT track will glitch out. For example, if a track has a Start Time of 0:10, the track will glitch out for at least 10 seconds before the track actually starts playing. Sometimes the track never stops advances beyond 0:00.
I think the problem caused by the fact that iTunes Match is streaming the entire track so the Music app just freaks out for the duration of the Start/Stop Times.
Has anybody else experienced this? Is there a workaround?
For now, I've just been searching my 22,000 song library for tracks with Start/Stop Times and exporting new hard-cropped files, but this is tedious, takes up hard drive space, and degrades the audio with lossy-to-lossy double-compression.

I'm having the exact same problem and from my research I believe that the old process of being able to turn ITM off, sync your music to your iPad, and then turn ITM back on no longer work. You are correct that going through this process wipes out your music. It's only on IOS 6.0 on my Gen 3 ipad because on my gen 1 iPad, I can't upgrade to IOS 6.0 and the old process still works fine under IOS 5.0.
In order to get around this I created a massive playlist (a superset of all my other playists) that I downloaded by using the download button in order to get local copies of my music on my ipad 3.0.
It seems to be working for now but I can't force my ipad to keep all that music local anymore. If I download other music or movies in the future (and become low on space) Apple makes the decision about what to remove from my local copy in order to fit the new content on the device.

How to turn of "Automatic Start/Stop Detection for HDV Caputre

Hello,
I'm pulling my hair out trying to capture HDV 1080i-50 without getting separate clips created by the metadata at the start and stop of each shot. It's that feature called "Automatic Start/Stop Detection." I'm not talking about "Make new clip on timecode break."
How can I turn this Start/Stop thing off. I don't want all these **** clips everytime the cameraman hit the record button.
Anyone know how to turn it off so it stops making separate clips?
Thanks!
Kirk

Yeah, Andy. It helps to have the manual!! THANKS. It says... Select or deselect "+Create new clip on Start/Stop+ checkbox in the Clip Settings Tab of the Log and Capture window."
It's strange that I was looking for that kind of a box in all the various settings but not in the log/capture window.
Kirk out.

Aluminum Keyboard Volume Controls for iTunes?

Hi,
is it possible to use the Volume Controls from the Aluminum Keyboard for iTunes?
I use the Digital output for Audio on my Macs. So using this Key for iTunes would be the best usage for me.
Thanks!

You are aware if you use the Digital output (Optical, Fiber cable), like in my case the Volume keys don't have no function anymore.
So if there is a trick to use this Keys for iTunes (when using the Digital output) that would rock the Banana house full of Squirrels!

Where can i find start/stop scripts for all SAP instances

Hi,
I installed CI, DB and Dialog instance on a standalone S10 machine and i could see start scripts under /sapmnt/RAM/profile
START_DVEBMGS09_hostSAP
START_D24_hostSAP
But i cann't see stop scripts for the above and also i cann't see start and stop scripts for SAP DB instance. Could some one point me where i can find them when everything is installed on a single box.
Thanks,
Ram

USAGE: STARTSAP.EXE name=<SID> nr=<SYSNR> SAPDIAHOST=<host>
FURTHER INFORMATION:
- The executable sapstart.exe must be in the same directory
when you start sap instacne, it will check db instance first, if db instance not start , it will automatic start db instance then sap instance.
vice visa :
stopsap is alos can be used.

Manually specifying start/stop times for video

When we insert a video into a Keynote presentation, we can adjust the start/stop times of the video (inspector -> Quicktime icon). The problem here is that it's very difficult to accurately adjust the sliders due to the small slider. Is there a way to extend the slider so that it's longer, or simply a way to manually specify the start/stop times?

Unfortunately, there is not. Your best bet it to use Quicktime or iMovie to trim the movie down to just what you want to show and then you don't have to worry about setting it in Keynote. This will also save some file size as you don't have the video that you don't want to show taking up space in the Keynote file.

How do I create a start/stop button for each separate while loop within my program, when each of them does a different task?

I have a multimeter VI with separate while loops to accomplish the different tasks of reading voltage, current, etc. Each while loop has a stop button, but I need a button that will have to be pressed in order for the while loop to even start. I tried putting another while loop around the present one, but it still has to run once before it will stop. I want the user to have to press the button before it runs, because they interfere with each other.
I am just learning so patience and your kind assistance is greatly appreciated!
ElectroKate

iZACHdx wrote:
Hello,
I'm not entirely clear with everything you have going on and what you want your final functionality to be, but you can use sequence structures to prevent a loop from starting until the user presses a button like this:
-Zach
I have to ask, why is an NI employee using examples using sequence frames? The same thing could be accomplished using data flow by simply wiring the value of the first stop button out of teh first while loop and connecting it to the second loop. This would then use data flow to control the sequence. Why show new users bad programming methods?
As to the original question I would concur with altenbach on using an event structure.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Parental Controls for iTunes?

is there any way to control the purchasing on itunes, such as restricting purchases when there is on pre-payed itunes gift cards in the itunes account. So that I wouldnt have to worry about family draining my bank account on the apps store and such?

I'm not sure; I can't find anything on the iTunes Store or iPod update information that says whether you have to purchase one update for each iPod touch you own. I would presume so, but it's not spelled out, nor how you'd go about it if you don't have multiple accounts in the iTunes Store. You'll probably want to contact the iTunes Store customer service department and ask:
http://www.apple.com/support/itunes/store/browser/
There's no obvious category that fits that sort of question, so choose any topic; perhaps something in the "Purchases" category.
Regards.

Start/Stop OPMN for a Remote OAS instance?

Hi,
I found this documentation online for Starting and Stopping all OPMN Managed Processes for a Remote Oracle Application Server Instance:
http://download.oracle.com/docs/cd/B31017_01/core.1013/b28944/tasks.htm#i1017215
Ex: prompt > opmnctl @instance:oracleas2.foo.com startproc
However, from what I understand, I can't use this command unless the server I'm calling it from has an installation of Oracle Application Server... is this correct?
I was wondering if I could do a stopall/startall of a 10.1.3.1 Oracle Application Server instance from a different/separate Oracle database server?
Thanks much,
Nora

What about:
ssh oracle@remotehost opmnctl startall
This will only work provided that you have set up your remote environment properly.

Catch-22 in start/stop order for avahi-daemon and avahi-dnsconfd

I have to start avahi-daemon before avahi-dnsconfd or avahi-dnsconfd will fail. But I have to stop avahi-dnsconfd before I stop avahi-daemon or avahi-dnsconfd says FAIL when rc.shutdown tries to stop it. I can solve the start order problem by putting avahi-daemon first in DAEMONS, but rc.shutdown stops them in the same order, causing FAIL messages for both services. I don't think this is causing any problems on my system, but I don't like seeing FAIL messages during shutdown, at a time I can't do anything to see investigate what happened. Any ideasZ

I have to start avahi-daemon before avahi-dnsconfd or avahi-dnsconfd will fail. But I have to stop avahi-dnsconfd before I stop avahi-daemon or avahi-dnsconfd says FAIL when rc.shutdown tries to stop it. I can solve the start order problem by putting avahi-daemon first in DAEMONS, but rc.shutdown stops them in the same order, causing FAIL messages for both services. I don't think this is causing any problems on my system, but I don't like seeing FAIL messages during shutdown, at a time I can't do anything to see investigate what happened. Any ideasZ

Single start/stop button for looping movie

Dear Friends,
I apologize if this has been addressed already in the forum, as I have had no luck searching here or the web in general for a solution.
I currently have a 23-frame multilayered single-scene animation designed to loop continuously which I would like to add to my portfolio. As such, I am adding a Play button, which I would like to toggle to a Stop (or Pause) button. I currently have an instance of the Play button ("playButton") created.
(You can find this at pineboxmovingco.com/gear_redux.swf)
Besides imploring your assistance in providing the code, I must also ask if this requires (and best practice for) inserting an additional frame at the beginning for the ActionScript, as well as where/what layer to add an instance of the Stop button. I would like the movie to be stopped by default, presenting the Play button, toggling to the Stop button, and back to the Play button, each upon release.
Thank you so much in advance!
Michael T
Phila, PA

So, Ned, insert the stop(); command - with no other code - on each keyframe of the MC like so:
Then, return to Scene 1 and select the MC, inserting the code:
With an additional "stop" command in the first frame:
I must be missing something as it is continues to loop. Any further assistance would be greatly appreciated...
Michael
(UPDATE: Replaced second image with AS reflecting replacement of XXX with "1".)
Message was edited by: turnerator

Re: System 5 error when trying to start database control for 11g db windows 7

i have the same error "https://localhost:1158/em/console/aboutApplication Starting Oracle Enterprise Manager 11g Database Control ...Error de sistema 5." i have installed Windows 7 ultimate, Oracle 11.2.0.1. What should i do?

1008385 wrote:
i have the same error "https://localhost:1158/em/console/aboutApplication Starting Oracle Enterprise Manager 11g Database Control ...Error de sistema 5." i have installed Windows 7 ultimate, Oracle 11.2.0.1. What should i do?
You should start your own thread.
How do I ask a question on the forums?
SQL and PL/SQL FAQ

ITunes start/stop, Siri interrupts iTunes in iP5. Making crazy.

This is a probelm I've taken to my local 'genius' bar with no solution. They claim either 'corrupt audio file' or broken home button. Replaced home button. No change. No way to identify a specific 'corrupt' audi ofile when they all play the same now.
This is a virus and no one knows how to deal with it. Really disappoining.
Any one else? Any ideas? Apple at a loss.

Oh, ya. I know all about that problem. Sorry it is not good news. You will probably need a new phone. Moisture has gotten into the button or the dock port and shorted the home button contacts. Replacing the button will not fix it since it is the contacts on the board that are shot. You can Google fixes for iPhone home button, for more details. There is a rough work around fix of adding a few drops of rubbing alcohol on the button and pressing it 15 times then blowing it out with compressed air. This helped a bit, but did not fix the problem.
Happened to me while I was running a bit of sweat must have gotten in. There and it started happening to me.

Start/Stop control for itunes

Similar Messages

Maybe you are looking for