START & STOP

Just a silly question.
Can I make the execution halts for a few seconds without using any Thread stuff? Sort of sleep...
Thanks.

You mean I have to use Java's Thread anyway. But you cannot run a Java program without at least one thread.

Similar Messages

  • How do I select multiple albums in Revel to start/stop sharing?

    How do I select multiple albums in Revel to start/stop sharing?

    Hello,
    You have to select each one to share the album. You can have multiple albums sharing at the same time. Please see our FAQ post "How to share photos with Revel"
    http://forums.adobe.com/thread/1157995?tstart=0
    For additional helpful information regarding Revel , please see our main FAQ Forum http://forums.adobe.com/community/ps.com_sharing_and_storage
    Thanks
    Scott

  • How do I change the start/stop time for multiple songs not just one song at a time?

    How do I chnage the start/stop time for multiple songs not just one song at a time?

    I don't think you can in iTunes.
    Multiple editing in Get Info does not offer an option to change start/stop times.

  • Start/Stop music time in iTunes not syncing to iPod

    Hi, I've managed to change the start/stop times in a few of my songs to skip some lengthy intros/outros in iTunes, but for some reason, these changes refuse to be synced onto my iPod Touch (second gen).
    I'm not exactly sure what to do in this situation... any suggestions are greatly appreciated :]
    Edit: No idea how this got into the iPod nano 4th gen subforum... I was in the iPod Touch subforum when posting this
    Message was edited by: seanterisu

    I just went through and tried both updating and authorizing my computer to play the music. I have the most recent version, and even after authorizing my computer nothing has changed.
    If this helps, even on the iTunes screen, while the music files show up in the iTunes part of the library, the smart lists are empty of the same music files under the iPod listing.
    Thanks for the help, perhaps you can provide more?

  • Can not  start/stop fullfilment server after fresh install

    Can not start/stop fullfilment server after fresh install
    Product: e-business suite (11.5.9)
    Platform: Win XP 5.1 (SP2)
    We have performed a new installation of ebusiness suite in our windows platform.
    Installtion went with out any problem.
    But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
    c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
    script returned:
    C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
    You are running jtffmctl.cmd
    Mon 13/09/2004
    01:46 PM
    "Starting Fulfillment Server for "PROD" on port "9300" ...\n"
    "Error returned while running OUI"
    ERRORCODE = 1 ERRORCODE_END
    .end std out.
    Class not found: oracle.apps.jtf.fm.engine.processor.Processor
    Please let us know how to fix this issue.
    Regards, Kunal

    edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

  • I have installed Premiere Elements 11 from a disc I bought from Amazon.  I keeps asking me to re-install or if it does start stops a few minutes after I start a project.  I have a windows 8.1 PC.  I have tried numerous times to install the program and als

    I have installed Premiere Elements 11 from a disc I bought from Amazon.  I keeps asking me to re-install or if it does start stops a few minutes after I start a project.  I have a windows 8.1 PC.  I have tried numerous times to install the program and also to open it as Administrator as suggested by a friend but it still refuses to work.  I need direct help from Adobe but don't know how to get to them on this website as they seem to rely on user forums to advise customers.

    WhiteHouse Norm
    This question is already being responded to in the following duplicate thread
    Premier elements 11 keeps stopping
    Please reply in the other thread which has a discussion in progress.
    Thank you.
    ATR

  • I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

    I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

    Good work, thanks for the report.

  • How to Get Duration, Start/Stop Time of Each Instance (Run)

    Can someone tell me how to get the Duration, as well as Execution Start/Stop times for a given run (Instance) of a Report, stored in History?
    For example, on the BO Server in InfoView, I can browse the History of each report, and for each run, I can click the details and view the Duration and Start/Stop times for that run. How do I get that information in Java via the SDK?
    Neither IProcessInfo nor ISchedulingInfo seems to have this information.
    For example, ISchedulingInfo's Start/Stop Times are for general scheduling (when the report will stop being scheduled). That is not what I want.
    I need specific data for a given completed Run, namely its duration and time endpoints. Thanks a lot.

    Hi,
    fetch the instance of the run like this
    IInfoObjects list = infoStore.query(
    "select SI_STARTTIME , SI_ENDTIME From CI_INFOOBJECTS Where SI_ID=<instanceIDtoMeasure>"
    IInfoObject element = list.get(0);
    Date startTime = element.properties().getDate("SI_STARTTIME");
    System.out.println("Beginn "+ startTime);
    Date endTime = element.properties().getDate("SI_ENDTIME" );
    System.out.println("End " + endTime);
    long time = ((endTime.getTime() - startTime.getTime()) / 1000);
    System.out..println("Runtime " + time + " sec");
    You can get the nstanceIDtoMeasure form your Report with getInstances
    Enjoy
    johannes

  • How to adjust Start/Stop position of a song on the iPhone (not iTunes)?

    Hello all,
    Before I caught my flight today, I decided to make a ringtone of my new favourite song. Obviously one of the steps in doing so involves selecting a specific start and stop position within iTunes be fore creating the ringtone.
    So I got on the plane and realised that I didn't remove the start/stop positions on the song after creating the ringtone. Now i'm stuck with only a 40s interval being able to be played!
    Please tell me there is a way to change the start/stop position of the song within the actual iPhone as I won't have access to my iTunes library for quite some time!
    Any help appreciated.
    Regards
    iPhone 3G2 32bg, 3.1.2

    No

  • Start, stop and restart while loops

    Hi, my qustion is i have 2 example a and example b. Example b lets u start counting up in seconds when u want to. as long as the toggle switchs are in correct position. it also lets u start, stop and restart if need be. i want to be able to that with example a, but for some reason the while loop always sets of running independent of what position the the toggle switch. Any help greatly appreciated.
    Thanks Stuart
    Attachments:
    examplealib.llb ‏202 KB
    exampleb.vi ‏25 KB

    An example as the attachment.
    Attachments:
    switch.vi ‏23 KB

  • Creating a Business Service for Start/Stop Application Service in CCB 2.3.1

    Hi,
    I'm in the process of creating a BPA script that invokes a Business Service to perform a Start/Stop for a given Account ID/Premise ID combination. The Business Service is using the base Application Service: Start Stop (CILCSSEP). I am moving the Account ID and Premise ID, along with the start date and requested by fields to the data area of the Business Service, prior to invoking it. When I invoke the Business Service via the BPA script, it throws the below error message... I'm at a loss because the BILL_ADDR_SRCE_FLG is being set to a default of "PREM" on the Business Service Schema:
    A Bill Address Source is required on the address override record. Please enter a valid value.
    One of these two is true:
    1) The Bill Route Type on this record has a Bill Routing Method of 'Postall', or
    2) The main customer on the Account has a Quote Route Type with a Quote Routing Method of 'Postal'.
    In either case, the Bill Address Source must be populated with a valid value.
    If you need support please supply the following info to system support:
    Message number: 3, 59204
    Business Service: CMSTARTSERVICE
    Application Service: CILCSSEP
    Schema:
    <schema pageAction="fastChange">
    <accountId mapField="ACCT_ID"/>
    <df mapField="DEFAULT_FOR_FLG"/>
    <startDate mapField="STRT_START_DT"/>
    <startOption mapField="STRT_TYPE_FLG"/>
    <premiseId mapField="STRT_PREM_ID"/>
    <premAddress mapField="ADDRESS1"/>
    <premCity mapField="CITY"/>
    <startCisDiv mapField="STRT_CIS_DIVISION"/>
    <startReqBy mapField="STRT_STRT_REQ_BY"/>
    <bldStrtSaSw mapField="BUILD_START_SA_SW" default="true"/>
    <accountIdtwo mapField="ACCT_ID2"/>
    <mainCustPerId mapField="MAIN_CUST_PER_ID"/>
    <billFrmtFlg mapField="BILL_RTE_TYPE_CD" default="POSTAL" private="true"/>
    <billAddrSrcFlg mapField="BILL_ADDR_SRCE_FLG" default="PREM"/>
    <billAddrSrcFlg2 mapField="BILL_ADDR_SRCE_FLG2" default="PREM"/>
    <startStopTelephoneOverride type="list" mapList="OVRD_PHONE">
    <accountId mapField="ACCT_ID"/>
    <sequence mapField="SEQ_NUM"/>
    <phoneType mapField="PHONE_TYPE_CD"/>
    <internationalPrefix mapField="COUNTRY_CODE"/>
    <phone mapField="PHONE"/>
    <extension mapField="EXTENSION"/>
    <version mapField="VERSION"/>
    </startStopTelephoneOverride>
    <startBtn mapField="ACTION_START_SW" default="true" private="true"/>
    </schema>
    I'm running CC&B 2.3.1 - Any help in pointing me in the right direction to get this working would be greatly appreciated, Thanks!
    Regards,
    Jack

    Hi,
    Can you try and do this transaction online and see if the error occurs as well? If so run it with traces on and check for the details just before the error is thrown. ( you can also switch on debug via the service call, but it may be easier to debug when doing this online. ) I am predicting this error will occur also when you do it online.
    When you are using an Account with its main Person set up with BILL_ADDR_SRC_FLG as PREM you will need a valide PREM_ID on the CI_ACCT record for MAILING_PREM_ID and the premise needs to have a switch set to YES indicating it is a Mailing Address type Premise.
    Good luck
    Arjen

  • When i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.

    when i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.when i click start it says the apple mobile device services stopped in the middle then stopped.it said some services stop in the middle if not used by other services.and i just updated itunes before all a this and ever since ive had errors.

    Have you looked at this article:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Problem with auto start-stop script

    Hi to All,
    Logged as root. I have create in /etc/rc.d/init.d this file and saved as dbora (Oracle Linux 5.4):
    +#!/bin/sh+
    +# chkconfig: 345 99 10+
    +# description: Oracle auto start-stop script.+
    +#+
    +# Set ORA_HOME to be equivalent to the $ORACLE_HOME+
    +# from which you wish to execute dbstart and dbshut;+
    +#+
    +# Set ORA_OWNER to the user id of the owner of the+
    +# Oracle database in ORA_HOME.+
    ORA_HOME=/u01/app/oracle/product/10.2.0/db_1
    ORA_OWNER=oracle
    +if [ ! -f $ORA_HOME/bin/dbstart ]+
    then
    echo "Oracle startup: cannot start"
    exit
    fi
    case "$1" in
    +'start')+
    +# Start the Oracle databases:+
    +# The following command assumes that the oracle login+
    +# will not prompt the user for any values+
    su - $ORA_OWNER -c "$ORA_HOME/bin/dbstart $ORA_HOME"
    touch /var/lock/subsys/dbora
    +;;+
    +'stop')+
    +# Stop the Oracle databases:+
    +# The following command assumes that the oracle login+
    +# will not prompt the user for any values+
    su - $ORA_OWNER -c "$ORA_HOME/bin/dbshut $ORA_HOME"
    rm -f /var/lock/subsys/dbora
    +;;+
    esac
    After creation I have execute:
    *#chmod 750 /etc/rc.d/init.d/dbora*
    *#chkconfig --add /etc/rc.d/init.d/dbora*
    The last command return this message:
    +"service dbora does not support chkconfig"+.
    Can You help me? Have You an idea ?
    Thank You and best regards
    Gaetano

    sb92075 wrote:
    Oracle RDBMS needs to be started by process running at OS level as owner of Oracle software; typically OS user "oracle" & not as ROOT!Ok,
    But I have founded this script at [http://www.oracle-base.com/articles/linux/AutomatingDatabaseStartupAndShutdownOnLinux.php].
    The article report:
    Article
    When using RAC or ASM under Oracle 10g Release 2 or above, the Oracle Clusterware automatically starts and stops the Oracle database instances, so the following procedures are not necessary. For all other cases, you can use the methods described below.I must suppose, that the author has written an incorrect article?
    Best Regards
    Gaetano

  • Something similar to 'gcstartup'  for automatic  start / stop

    Hi @ll
    Is there any similar to ‘/etc/rc.d/init.d/gcstartup’ script for an automatic start / stop for GoldenGate manager on a Server.
    I use an OBEY command in a start.txt file with start_ogg.sh file, but there are an OEM agent , a listener and the database on this machine and I would like to start all of them automatic at ones.
    Regards
    jfa

    Hi Nic:_W
    Thank for the answer.
    I have just modified the gcstartup like that :
    #!/bin/sh
    #Source Function Library
    SU=/bin/su
    DBST="N"
    if [ -f /etc/oratab ]
    then
    oratab="/etc/oratab"
    else
    if [ -f /var/opt/oracle/oratab ]
    then
    oratab="/var/opt/oracle/oratab"
    fi
    fi
    if [ -f "$oratab" ]
    then
    for i in `cat $oratab | grep -v '^#' | cut -d ":" -f2`;
    do
    if [ -f "$i/start_goldgate.sh" ] ;
    then
    user=`ls -l $i/start_goldgate.sh|awk '{print $3}'`;
    if [ $1 = start ];
    then
    DBST='Y'
    $SU - $user -c "$i/start_goldgate.sh ";
    else
    DBST='N'
    $SU - $user -c "$i/stop_goldgate.sh ";
    fi;
    fi;
    done
    fi
    and it works fine
    the content of start_goldgate.sh
    is
    cd /orasoft/app/ogg
    /orasoft/app/ogg/ggsci << EOF
    OBEY /orasoft/app/ogg/startup_ogg.txt
    EOF
    the content of startup_ogg.txt
    is :
    START MANAGER
    INFO ALL
    exit
    automatic restart of REPLICAT und EXTRACT parameters are in mgr.prm file.
    Analogue for stop*/shutdown* files with 'STOP MANAGER'
    regards
    jfa

  • Transmitting start/stop/play messages to external instruments

    How do I get Logic to transmit start/stop/play messages to my external Roland groovebox?
    I've tried ticking the "Transmit MMC" in the Synchronization settings but it doesn't seem to work.
    Basically what I'm trying to achieve is when I hit play on the Logic transport, the pattern in the groovebox starts.
    Cheers for the help

    Im totally a newbie, but I had issues controlling my Boss DR-880 and had success enabling the Sychronization -> Midi -> Destination 1 checkbox. The dropdown is set to all.
    It doesn't seem to matter whether Transmit MTC is checked or not.
    Hope this helps.

  • Start/stop OAS 10g (9.0.4) instances remotely

    Hi,
    I want to find out if I can start/stop Mid-tier instance remotely.
    For example, I have Mid-tier installed on RHEL 3.0 server and Infrastructure installed on AIX server.
    I want to start/stop Midtier instance along with Infrastructure from AIX machine. Can any one suggest any script for this?
    Thanks in advance!
    GN

    I don't know if its possible in a single script.
    What I'll do is connect over ssh to the servers and run some of the scripts available to start/shutdown the instances.
    In [1] there are some useful scripts. (the scripts need to be IN the server, not your client)
    [1] - http://www.oracle-base.com/articles/10g/OracleAS10gAutomaticStartupShutdown.php

Maybe you are looking for