Start takes up to 15 minutes

When I start my mac it takes 15 minutes. What can I do?

Poikkeus - I have the same problem and will give you a rundown of what you asked Stefan201.
1. 2.66 GHz Core 2 Duo running 10.7.5
2. 4 GB 1067 MHz DDR3
3. None
4. Yes, it takes at least 15 minutes to restart
5. During startup it sits on a gray screen with the apple logo and the circle spinning.  At this time the fan runs like mad and it slowly, slowly starts
Additionally I have tried a few things to speed up the MBP.  I have cleared the PRAM. I have run disk utility and verified/repaired any problems. I do have the hard drive partitioned and am running windows 7 on the partition.
Thanks for the help!

Similar Messages

  • MacBook pro takes more than 10 minutes to start with ML ?

    My Macbook pro takes more than 10 minutes to start. I press Start and it takes more than 10 minutes before I can enter my password. Need your help !

    Sounds like time for a PRAM reset. Here's how:
    1. Power down the machine.
    2. Locate the following keys on your keyboard in preparation for Step 4:
    ‘command’ – ‘option’ – ‘P’ – ‘R’
    3. Press the ‘power on’ button.
    4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
    5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as normal.

  • Firefox has slow start up & I have the latest version. IE, Chrome, AOL start right away. Firefox takes up to 10 minutes.

    Firefox has slow start up & I have the latest version. IE, Chrome, AOL start right away. Firefox takes up to 10 minutes.
    == This happened ==
    Every time Firefox opened
    == when updated to 3.6

    You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes <u>'''before'''</u> starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
    See:
    '''[[Troubleshooting extensions and themes]]'''
    '''[[Troubleshooting plugins]]'''
    '''[[Basic Troubleshooting]]'''
    If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling <u>'''one at a time'''</u> until the problem reappears. <u>'''You MUST close and restart Firefox after EACH change'''</u> via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

  • It takes 5 to 10 minutes to start the i-tunes program

    It takes 5 to 10 minutes for i-tunes to start from my desktop. I have windows XP. I installed the latest version of i-tunes but that did not help. After the i-tunes program starts it runs normally with no speed problems. I have over 4,000 songs loaded into i-tunes. Anyone have any ideas?

    http://kb.mozillazine.org/Standard_diagnostic_-_Firefox

  • It takes 5 to 8 minutes for photoshop cc to start

    when starting photoshop cc it take 5 to 8 minutes for the program to start. If you look under forced quit on the mac it says the program is not responding, and then 5 minutes later it starts.
    Does anybody have any suggestions as to how to sort this out?

    http://kb.mozillazine.org/Standard_diagnostic_-_Firefox

  • After Restoring My Mac Book Pro it takes over 3-5 minutes to start!

    I have a macbook pro version 10.6.5 it recently crashed and I restored it with my time share backup and now it takes a good 5 minutes to start up and is very slow in opening safari pages. What can I do to get it back to running on normal speed?

    How much free space on the startup disk?
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
    Freeing Up Hard Disk Space - Mac Guides
    And check System Preferences > Accounts / Login Items. Delete any apps you have listed there to launch when you startup your Mac.

  • Premiere Pro CS5 takes up to 40 minutes to start up

    Hi everybody,
    I am having issues with our copy of Premiere Pro CS5 - as I mentioned above, it can take up to 40 minutes, or longer, for it to create a new or load a previous project. I work at a school and we have a computer lab with 30 iMacs, running OS X 10.6.5, with the Adobe CS5 Master Collection installed on all of them. We also have a Mac server (Mac Mini) that runs Open Directory, which is used for authentication.
    The issue only occurs when a networked user logs on - when I log in with a local user account, everything runs fine. I know this has to be some kind of permissions issue, I just do not know exactly what to look for, as I am a bit of a noob when it comes to Adobe, or Apple products, for that matter. I have been looking for a solution for quite a while - I reinstalled Premiere, Googled, and looked on the forums, all with no luck. I found similar posts, but they were not exactly like mine. I would really appreciate any help that I can get on this matter. Thank you.
    Regards,
    Nikita
    P.S: the firewall is off on all of the computers.

    >What makes Premiere different
    Todd or another employee may be able to give a technical answer
    As a user who has been reading in the Premiere forums going back to 2002 and Premiere 6x I will only say that everything I have ever read, in a discussion like this, is that all versions of Premiere are designed to be run by one user on one computer... with local, not network, settings... so the program may be "tuned" to do the best possible job for that one user
    This is simply a design decision that has never been changed... the product is simply not designed to do what you want
    I am sure there is video editing software written to be multi-user and/or network operated... but I don't have any idea what that might be (if you want Hollywood studio team editing functionality, you'll have to pay Hollywood studio prices)

  • When I connect to the hotel wireless, it takes 2 or 3 minutes to be redirected to the login page

    Hi all,
    I have a problem with my Firefox 4 beta: when I connect to the hotel wireless, and I start the browser, I should be automatically redirected to the hotel's main login page.
    In FF4b I get 2 error messages (attached) and I am not redirected immediately... it takes 2 or 3 minutes to be redirected.
    If I don't want to wait I have to start IE, make the login, and then get back to FF4b.
    I believe this situation is connected with the "Test Pilot" and/or the "sync" function of FF...
    Any ideas about what I should do? Any setting I should change?
    Thanks,
    Tozé
    Link to error messages:
    [http://dl.dropbox.com/u/12096987/FF4b_Error1.jpg Error message #1]
    [http://dl.dropbox.com/u/12096987/FF4b_Error2.jpg Error message #2]

    Hi Prakashkarthikeyan,
    If you are having an issue with your cellular data connection not linking up properly, I would suggest that you troubleshoot using the steps in this article - 
    iPhone cellular data connection issues
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • ORCL Service start takes a lot of time in German OS and German DB!!

    HI Gurus!!
    I have a problem here.
    I am running Oracle 8.1.6 on Windows NT 4.0 Enterprise edition.
    It is a German O.S. and German Oracle database.
    When I try to start OracleServiceORCL through net start in DOS
    window or through services, it takes more than 5 minutes to
    start the service.
    I have no idea why it is doing that. When I open another DOS
    window and try to start Oracle through server manager, it
    improves the start time for service.
    Any thoughts on this please.
    Kind Regards
    SP

    You have two possibilties:
    1. change the "user" starting the oracle service to the local
    administrator (settings -> services -> Oracle... -> ...)
    2. change the registry key AUTOSTART... to false, but then you
    have also start the database on your own with sqlplus/svrmgrl.
    Thomas

  • I upgraded to Mtn. Lion last night but now it takes forever to boot up.  I get to the desktop and my wallpaper is there, but the items on my desktop take more than 5 minutes to load.  It's a ridiculously long time.  Can I fix it somehow?

    As I said, I upgraded my MacBook Pro (2011) from Lion to Mountain Lion last night.  This morning I couldn't get it to boot up at all.  The beach ball just spun and spun.  Now I can get it to my desktop and can see my wallpaper, but it takes another FULL five minutes to finish loading my desktop items.  Can I do anything to speed this up?  It's a ridiculously long time to wait.  I haven't even tried opening any applications yet.

    go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Zoom -> click "Reset"
    -> go to View Menu -> Page Style -> select "Basic Page Style"
    -> go to View Menu -> Toolbars -> unselect unwanted toolbars
    -> go Tools Menu -> Clear Recent History -> Time range to clear: select EVERYTHING -> click Details (small arrow) button -> place Checkmarks on ALL Options -> click "Clear Now"
    -> go to Tools Menu -> Options -> General -> ''When Firefox starts : '''select "Show My Home Page"''''' -> Type the address of the website which you want to be your HomePage e.g. http:www.google.com -> click OK
    -> go to Tools Menu -> Options -> Privacy -> History section -> ''Firefox will: '''select "Use custom settings for history"''''' -> PLACE CHECKMARKS on:
    1) Remember my Browsing History
    2) Remember Download History
    3) Remember Search History
    4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
    4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
    -> REMOVE CHECKMARK from Last Option (CLEAR HISTORY WHEN FIREFOX CLOSES)
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select unwanted search engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE any Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

  • Stucked in "it may take up to three minutes to activate your ipad"

    Bloody Apple,
    It's been my fifth apple product that stop working. I loose 4 iPods already.
    now my iPad stucked in the message "It may take up to three minutes to activate your iPad" for no reason at all.
    It was working a night before, and next morning I couldn't start it.
    I try to reinstall, reset the configuration, and there it is. I can not leave the activating part of the iPad reconfiguration.
    Does someone can help me?
    Thanks from Guilherme, São Paulo, Brazil

    I assume this is a wifi problem. Try the fixes below.
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    Try This - Renew IP Address:
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have a HP Pavilion p6710f with an AMD Athlon Quad-Core processor takes 10 to 12 minutes to boot

    I have a refurbished HP Pavilion p6710f desktop, with an AMD Quad-Core processor.  About 4 weeks aog I reformated the HD and reinstalled Windows 7 Prof and the rest o my software and it ran fine for about 2 weeks then it started taking 5 to 10 minutes to boot up in morning or to restart.  I had downloaded a couple of things and I uninstalled them and it did better, but gradually over the last week it has started taking 10 to 15 minutes to boot up or restart.  With either it takes a few seconds to get the HP stuff in the middle of the monitor, then in a few seconds it loads the choices (Function keys for setup, recover, etc.) then it takes 4 to five minutes to show "windows loading" the 3 to 4 minutes to show the 4-colored windows logo and then up to 5 minutes to load my icons and be ready to run--once all this is done everything runs fine until I need to restart, and then it is 10 to 15 minutes again to get up and running.
    When I redid everything about 4 weeks ago I made an image on an external 1 Tb HD that is always connected thru a UBB Port and this morning I recovered and It reinstalled it, but it did not help.
    Don't think it is the BIOS battery as it doesn't lose time.
    Hope someone can help me
    drp6149

    Seems to me that your hard drive is gonna fail soon, trying running hard drive diagnostics from the BIOS.
    HP Elite h8-1070T Intel Core i7 2600 12GB RAM AMD Radeon HD 6850 1GB Windows 8 Professional 64-bit (Gaming)
    HP DC7900CMT Intel Core 2 Duo 3Ghz 4GB RAM Windows 8 Professional 64-bit (Workstation)
    HP XW4200 Intel Pentium 4 HT 3.6GHz 4GB RAM Windows XP Professional (Home File Server)

  • All of a sudden, for no apparent reason, it takes up to 5 minutes for the prompt for my password to come come on screen?

    When I open Thunderbird it takes up to 5 minutes for the prompt to come up to enter my password. This has just started happening-for no apparent reason. I opened the program in 'safe mode' and it made no difference. Please advise.

    Hello Matt,
    I hope you had a nice holiday...
    OK, so, opening in safe mode does not change behavior.
    I'm on Mac (ver 10.9.5), Thunderbird 31.3.0 - up to date.
    I'm using a POP server. If changing to IMAP will be beneficial please give instructions. I didn't find anything helpful on the Mozilla site for doing this.
    recap:
    It takes 2+ minutes for my password verification to come up.
    It no longer automatically downloads new emails once I am able to enter password (I checked the account settings and it IS selected to do this).
    It takes 1-2 minutes to send messages (no attachments).
    I can't think of anything I may have done to cause this change in the way it works. Is there any other specific information you'd like?
    Thanks,
    Laura
    ''Matt [[#answer-664747|said]]''
    <blockquote>
    what happens with the operating system safe mode?
    Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.
    </blockquote>

  • My iMac 21.5 Inch takes more than 10 minutes to boot. How to solve??

    I have just installed Mac OS X v10.6.7. The iMac just boot super slowly. It takes more than 10 minutes to become responsive...
    How can i solve the problem???

    This could be something as simple as a corrupted cache or as drastic as a failing hard drive, but try the less drastic first. Back up all your data and run Onyx 'automation'. You could empty all your caches manually, but Onyx will do it in one click. If Onyx doesn't resolve the start up issue you will have to start thinking about more drastic measures.
    Onyx: http://www.titanium.free.fr/download.php

  • Every page I load takes more than a minute to load - clicking anywhere gives message that firefox is not responding. I don't like this version, it sucks - tabs are not defined well, can barely see them.

    for instance, if I load www.msnbc.com it will take more than a minute to fully load in that if I click on a link or try to scroll, the entire browser locks up, if I try to scroll, or click on the page, I get the message that the program is not responding.

    If you've updated from a version as ancient as 3.5.4, then you run the risk of encountering problems. You should start with a fresh profile to ensure old preferences, data files and changes made by extensions are not interfering.
    First, create a backup copy of your profile folder, just to be safe.
    * [[Back up and restore information in Firefox profiles]]
    Then use the Reset Firefox feature.
    * [[Reset Firefox – easily fix most problems]]
    If the problem persists, see the following article.
    * [[Firefox hangs or is not responding - How to fix]]
    Do not reinstall old versions of Firefox. They contain security vulnerabilities and shouldn't be used. Very old versions might also be unable to handle data files in your profile folder in their new formats, which can lead to all sorts of problems. And lastly, many websites require a modern browser to work properly.
    * https://www.mozilla.org/security/known-vulnerabilities/firefox.html

Maybe you are looking for

  • Format of a numeric/decimal field

    Can we set the format of a decimal field to display zzz.999 without rounding off the value. For example,I have a decimal field with display & Edit pattern set as "zzz.999" and trailing digits limited to 3. If I enter a value 123.456, its ok. But if I

  • Enet100 GPIB controller on 64 bit OS

    After having to upgrade to the new LabView because of a bug and seeing how poor its performance is, I decided to give it the benifit of the doubt and got a brand new Core 2 3GHz PC w/ 8G of RAM.   I figured the time I am wasting trying to use the new

  • Oracle EBS Discoverer as a data source for OBIEE 11g

    We are a heavy user of Discoverer workbooks with Oracle EBS. We're moving to OBIEE 11g(11.1.1.3) and have an RPD with both 3rd party and custom content. I wanted to ask the experts here how I can leverage my Discoverer investment with out a lot of re

  • When I send a new message it shows up from me in my inbox

    I Am syncing to an office Exchange 2010 on MS Office 365 cloud server. Whenever I send a new message from my iPad, it shows up on my Blackberry (and only on my blackberry) in the inbox. The Blackberry is using B.E.S. to sync with the same Exchange Cl

  • Link of Sample Configuration of APs in Design Zone

    Hi, I'm trying to find a document in Design Zone about configuring a Wireless AP and I wasn't able to find it. Can someone provide a link? I have a good experience configuring switches, routers and firewalls in CLI and this is the first that I have m