Start the Oracle and EM DBConsole service in Linux

Hi
How to start the ORACLE service (ORCL) and the EM DBConsole service in Linux (Suse 10) environment
i hv checked in the Bin - /opt/oracle/product/10.2/db_1/bin
but unable to figure out which service....
need help!

hi again
yh DB has been successfully opend.
select status from v$instance; ----> open
but still cannot get the EM DB console
http://machine-name:1158/em/
any idea...
this is the err...
lxuser@linux-tkuk:/opt/oracle/product/10.2/db_1/bin> *./emctl start dbconsole*
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://linux-tkuk.site:1158/em/console/aboutApplication
Timezone mismatch: The agentTZRegion value (GMT) in
/opt/oracle/product/10.2/db_1/linux-tkuk.site_orcl/sysman/config/emd.propertiesdoes not match the current environment TZ setting().
The dbconsole cannot run with this mismatch.
If GMT is the correct timezone, set your timezone environment variable to GMT and repeat the 'emctl start dbconsole' operation.
If GMT is not the correct timezone, make sure that the timezone in your environment is correct, and then run the following command in your local Oracle Home: 'emctl resetTZ agent'
The output of this command will include detailed instructions to follow, to correct the mismatch.
here it says to change the time zone...how to do that.....!

Similar Messages

Error 1053 when starting the Routing And Remote Access service

Hi all,
When I tried to start the "Routing And Remote Access" service on Windows 8.1 I got an error message as follow.
Could some one help me please.
Than's.

Hi MRAB,
Please check if all dependences are enabled first.
Then set the start type to Automatic.
Does this issue still occur after a restart?
Alex Zhao
TechNet Community Support

Could not start the Oracle Forms Server

I am using Windows 2000 Professional
The Oracle Forms Server [Forms60Server] service failed to start due to the following error:
Access is denied.
Event ID: 7000
Source: Service Control Manager
Description: Could not start the Oracle Forms Server [Form60Server] service on a Local Computer.
Error 0005: Access is Denied

Description:
I Installed Oracle Forms6i and when i tried to run web test form I got this :
Event Type:     Information
Event Source:     Application Popup
Event Category:     None
Event ID:     26
Description:
Application popup: ifcgi60.exe - Unable To Locate DLL : The dynamic link library D2LA60.dll could not be found in the specified path C:\orant\tools\web60\cgi;.;C:\WINNT\System32;C:\WINNT\system;C:\WINNT;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem.
this missed file already exist in <Oracle Home>\Bin
directory, and if I copied it to the asked destination
it asks for more CORE40.dll and NLSRTL33.dll
and then those also copied then the screen disappears
Question : Why did this error occur, what went wrong
and how do I fix this problem
2)the other question is in Forms9iDS Version 9.0.2.7.0 I am getting this error
Event Type:     Error
Event Source:     Service Control Manager
Event Category:     None
Event ID:     7000
Description:
The OracleOraHome9iAgent service failed to start due to the following error:
Access is denied.
FRM-92060 :Failed to connect to the server
Bad machine specification :/forms90/190servlet:-1
Any Suggestion will be appreciated

Error 1053 the oracle(8.1.6) service is not starting on a fresh windows 2000 install

Can anyone help!!!!!!!!
Oracle service does't start on windows 2000 gives error:
Could not start the oracle service on Local computer
Error 1053: The service did not respond to start or control
request in a timely fashion.

Can anyone help!!!!!!!!
Oracle service does't start on windows 2000 gives error:
Could not start the oracle service on Local computer
Error 1053: The service did not respond to start or control
request in a timely fashion. This is what I did to start the oracle service..
1. Change the startup type to manual in the windows service panel
2. Restart the Windows 2000 PC
3. Start the Oracle service by clicking the start button in the services window.
4. It will hit the same error ie 1053..
5. Now kill the oracle process using windows Task Manager
6 Once again go back to services window and click the start button
7. It will show the status meter window with a close button..
8. After the status meter crosses halfway hit the close button..
9. Your oracle process is started now..

Automate the database and forms / reports services to start on windows 2008 server R2 startup

Dear memebers,
I want to automate the database and forms / reports services to start on windows 2008 server R2 startup. whats the possibilities and which method is the best?
Regards:

Hi,
type services.msc at run
then check for Oracle Services--> Right Click-->Properties-->Startup type-->start automatic
HTH

Could not start the oracle service on local computer

Could not start the oracle service on local computer, did not return an error blah, blah.
I am running Oracle 9i r2 Windows, and have choosen to start my instances manually. When i start them up I get the above error message. But if I am a little patient the services do start up and all is fine, so far as i can see anyway.
I am curious to know why does this error message arise.
Thanks in anticipation
Fergus

To start the database in windows you have to start first the OracleService<SID> service.
These are the steps that you have to do at the command line:
NET START OracleService<SID>
SET ORACLE_SID=<database sid>
sqlplus /nolog
conn sys/password as sysdba
startupJoel Pérez
http://otn.oracle.com/experts

How can I start the Oracle services for windows?

I started the oracle services by order :
ifs:
1.tnslistener
2.iasdb
3.oid
4.processmanager
5.OEMwebsite
mid:
1.webcache
2.discoverer
3.processmanager
Is the order correct?

Hi Michael,
I think, then, that the problem is one of permissions. What I've done on Windows 7 installations is to go to the InDesign application folder (in program files), select the InDesign.exe file, use the Context menu (right-click) to display the Properties panel, and then turn on the Run This Program as an Administrator option in the Privelege Level section of the Compatibility tab. Click the Change Settings for All Users button to apply the change (assuming that your current user profile is an Administrator).
Let me know if that helps!
Thanks,
Ole

Need to stop the pop and Imap receive connectors to be able to start the pop and Imap services in Service Manager

Hello All,
I am hoping that someone else has run across this issue (may have started after CU5 was installed).
Upon every reboot I have found that the "Microsoft Exchange IMAP4" and "Microsoft Exchange POP3" services in the service manager will not start... basic reason in the event viewer is that the ports are already in use.
If I go into the ECP and disable my POP and Imap receive connectors I am able to then start the services.
After the services are started I can then go back to ECP and enable the receive connectors again and everything is fine .
Can anyone shed any light on this?
Thanks in advance ;)
Chris

Hello Winnie,
I bounced the Transport service tonight (adjusting spam filter levels)... so I was able to issue a stop and re-start of the IMAP4 and POP3 services in the service manager.
I stopped both the IMAP4 and POP3 services in service manager.
I issued the start of the services with PowerShell as requested:
PS C:\Users\administrator.XXXXXXXX> Start-service MSExchangePOP3
WARNING: Waiting for service 'Microsoft Exchange POP3 (MSExchangePOP3)' to start...
WARNING: Waiting for service 'Microsoft Exchange POP3 (MSExchangePOP3)' to start...
WARNING: Waiting for service 'Microsoft Exchange POP3 (MSExchangePOP3)' to start...
Start-service : Failed to start service 'Microsoft Exchange POP3 (MSExchangePOP3)'.
At line:1 char:1
+ Start-service MSExchangePOP3
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OpenError: (System.ServiceProcess.ServiceController:ServiceController) [Start-Service],
   ServiceCommandException
    + FullyQualifiedErrorId : StartServiceFailed,Microsoft.PowerShell.Commands.StartServiceCommand
Then I first stopped the receive connector in ECP and issued the command:
PS C:\Users\administrator.XXXXXXXX> Start-service MSExchangePOP3
WARNING: Waiting for service 'Microsoft Exchange POP3 (MSExchangePOP3)' to start...
WARNING: Waiting for service 'Microsoft Exchange POP3 (MSExchangePOP3
With the receive connector disabled in ECP it was successfully started.... then I enabled the receive connector in ECP and all is fine now
repeated the same with IMAP4
to recap....
If I stop the IMAP4 and/or POP3 service in service manager, I must first disable the IMAP and/or POP receive connector in the ECP, then start the service in service manage.. and then finally go into ECP and enable the receive connector.
Thanks,
Chris
Chris

Could not start the oracle orcl service on local computer 1053

I ve oracle 8i with Windows XP ,when I try to start it manually also it show ing the 1053 could not start the oracle orcl service on local computer 1053 what should i do?
Thanks
[email protected]

go to oarcle service
click the service
choose logon
click the boutton
local system. now try start service

Error while starting the Oracle BI Server

Hi ,
I am getting the services.msc error while starting the Oracle BI Server as -
Error handling the control request.
Please help me out ..
Thanks and Regards ,

It is actually Windows services error that I am facing ....
while starting the BI server after making any changes to NQS config file ..
Could not start the Oracle BI Server service on Local Computer
Error 1064: An exception occured in the service when handling the control request
Message was edited by:
user460211
Message was edited by:
user460211

Not able to Start the oracle db error "ORA-01031: insufficient privileges"

Hi experts,
I have oracle 11g setup on so solaris. i changed the db_cache_size
& processes values and stopped the DB services after that i am not able to start the oracle DB. Listener is running.
when i start the db server its giving the below error(startup.log)
./dbstart: Starting up database "orcl"
Mon Sep 27 04:31:08 MDT 2010
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Sep 27 04:31:08 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
SQL> ERROR:
ORA-01031: insufficient privileges
SQL> ORA-01031: insufficient privileges
SQL>
./dbstart: Database instance "orcl" warm started.
Please help me to ressolve this issue.
Thanks
Krishna

yes, password file is there in /etc/passwd
here are the contents:
root:x:0:0:Super-User:/:/sbin/sh
lroot:x:0:0:Super-User:/:/sbin/sh
daemon:x:1:1::/:
bin:x:2:2::/usr/bin:/bin/false
sys:x:3:3::/:
adm:x:4:4:Admin:/var/adm:/bin/false
lp:x:71:8:Line Printer Admin:/usr/spool/lp:/bin/false
uucp:x:5:5:uucp Admin:/usr/lib/uucp:/bin/false
nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico
listen:x:37:4:Network Admin:/usr/net/nls:/bin/false
nobody:x:60001:60001:Nobody:/:/bin/false
noaccess:x:60002:60002:No Access User:/:/bin/false
nobody4:x:65534:65534:SunOS 4.x Nobody:/:/bin/false
itunix:x:50000:14:IT Unix Account:/export/home/itunix:/bin/csh
hharika:x:765:38:Harpal Harika:/export/home/hharika:/bin/csh
prsingh:x:795:38:Pradeep Singh:/export/home/prsingh:/bin/csh
mmir:x:1229:21:Mir Monis Ali:/export/home/mmir:/bin/csh
bogunnai:x:1207:21:Bose Ogunnaike:/export/home/bogunnai:/bin/ksh
mpokala:x:2117:21:Mahesh Pokala:/export/home/mpokala:/bin/ksh
apopov:x:2385:38:Anton Popov:/export/home/apopov:/bin/csh
kkeith:x:2629:227:Kevin Keith:/home/kkeith:/usr/bin/ksh
sshd:x:22:22:SSH Privsep:/var/empty:/bin/false
patrol:x:2784:10:Patrol User:/opt/bmc:/usr/bin/ksh
smmsp:x:25:25:Sendmail Submission user:/none:/bin/false
ldap:x:50001:1002::/export/home/ldap:/bin/sh
perfuser:x:884:268::/export/home/perfuser:/bin/csh
webservd:x:80:80::/home/webservd:/bin/pfsh
oracle:x:156:40:Oracle Software Owner:/export/home/oracle:/bin/bash
perfuser_idc:x:64383:1::/home/perfuser_idc:/bin/sh
idc_perf:x:64384:292::/home/idc_perf:/bin/sh

Error 1064 while starting the Oracle BI Scheduler in Windows 7 - 32 bit

Hi Everyone,
When starting the OBIEE Version 10.1.3.3.3 's BI Scheduler, the following error has been retreived. ( I have installed newly and the rpd and the webcat has been placed in the corresponding folders newly. Before placing the rpd newly , when i started the Oracle BI Server , the same error has been retreived. But after replacing, its coming only for the Oracle BI Scheduler.
Error 1064 : An exception Occurred in the service when handling the control request
Please let me know your points to fix it in my local machine. ( The server mentioned above are installed in my local windows 7 operating system)
Thanks,
Madasamy M.

Well first of all, Oracle 8 is 15 years old, so im not surprised at all it doesnt work properly on a much newer OS.
%windir%/SYSWOW64/odbcad32.exe is for 32-bit drivers
%windir%/system32/odbcad32.exe is for 64-bit drivers and this is the one being executed when running from control panel
(logical, isnt it?...)
The registry keys containing information about these are:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ODBC
HKEY_LOCAL_MACHINE\SOFTWARE\ODBC
in /ODBC/ODBCINST.INI/"ODBC Drivers" key, there is a list of the drivers, while ODBC/ODBCINST.INI/<driver_name> contains the details
for example:
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\Oracle in OraDb11g_home2]
"APILevel"="1"
"CPTimeout"="60"
"ConnectFunctions"="YYY"
"Driver"="C:\\oracle\\base\\product\\db11202\\BIN\\SQORA32.DLL"
"DriverODBCVer"="03.51"
"FileUsage"="0"
"Setup"="C:\\oracle\\base\\product\\db11202\\BIN\\SQORAS32.DLL"
"SQLLevel"="1"based on this info, you can try to repair it in the registry manually as according to the error it doesnt have the correct path specified, however i would just install a newer, supported version

"could not start the Oracle BI Presentation Server on Local computer error"

Hello Folks,
i am trying to start the OBIEE Presentation services, The OBIEE server and Java Host Services are started.
i am getting this error and i didnt change any settings and finally getting this error
"Windows could not start the Oracle BI Presentation Server on Local Computer. For more information, review the System Even Log. If this is a non Microsoft service contact the service vendor, and refer to service-specific error code -1."
thanks

Here is the solution from another freind
1. Stop BI Server Service > Start BI Server Service > Start BI Presentation Service. If that doesn't work...
2. Restart machine and follow step 1. If that doesn't work...
3. Check instantconfig.ini file and check syntax is correct. Also check java directory path mentioned is the valid one. If that doesn't work...
4. Rename the catalog folder to something else and follow step 1. It will create new catalog folder. Then copy _Shared from old catalog folder and you are good to go.
catalog folder will be in oraclebidata/web/catalog...
either delete the folder and create a new empty one or rename it
also have a look at instanceconfig.ini file
thanks

Could not start the Crystal Report Application Server service on local computer

Post Author: [email protected]
CA Forum: Deployment
Hi
I have a following problem.
I have installed Crystal report application server(RAS)(CE embeded 10) on Windows server 2003 enterprise x64 edition.
When i start it, i see an error:
Could not start the Crystal Report Application Server service on local computerError 1067: the process terminated unexpectedly
Sometimes, i can start it but it stops a few minutes later.
I have disabled DEP (data execution prevention).
Log:
Faulting application crystalras.exe, version 10.0.0.533, faulting module unknown, version 0.0.0.0, fault address 0x00000000.
Please help
Thanks for your help

This error occurs after an initial install, when the Oracle suite is installed logged in as the user(who has admin rights on the machine). If this is the case,
1.Go to Services (Admin Tools > Services)
2.Double click the Oracle services( BI Server or Presentation or TNS Listener).
3.Go to Log On tab
4.If local system account is checked , un-check that option. Check "This Account" option
5.Give the user information for that machine(e.g domain\username)
6.Specify password associated with the user ( the username/pwd that is used to login to the machine)
7.Confirm pwd and click Apply.
8.re-start the service.
This is what i did , and it worked.
good luck and hopefully oracle addresses these issues , they become frustrating to use the product.
Thanks,
Ram

Starting the Oracle Identity Manager 9.1.0.2 Application Cluster (OWS)

Hello friends,
I have a question about how to start the Oracle Identity Manager 9.1.0.2 application that is deployed on Oracle WebLogic Server (OWS) 11g on 2 nodes (OIM_SERVER_01 and OIM_SERVER_02).
What is the procedure to start the Admin Server and then the nodes where the application is deployed Oracle Identity Manager 9.1.0.2
I left wondering the commands:
1. xlStartServer.sh
2. xlStartWLS.sh
3. xlStartManagedServer.sh
4. startNodeManager.sh
Thanks for the support...

First you need to start the AdminServer by the command xlStartWLS.sh then you can start the nodemanager on the hosts where your OIM server are located via the startNodeManager.sh command and then start the OIM Server via the xlStartManagerServer.sh command. Nodemanager is required to control the managed server if you plan to control them via the weblogic admin console. If you don't want to do that via console then xlStartManagerServer.sh and xlStopNManagedServer.sh would be able to control your oim servers. There is no specific order required for starting the oim servers, just that the admin server should be in running mode before you start the managed servers.
-Bikash

Start the Oracle and EM DBConsole service in Linux

Similar Messages

Maybe you are looking for