Start the Reader by the commandline with a link

Hello,
how can i start the reader by the command line with a link?
If the pdf-file is a local file, it's no problem but if its a file on a server it doesn't work. For files on the server, first the browser starts and not till then the reader
Have somebody an idea how i can start the reader direct with a link?
Thanks!
Kind regards,
A.T.

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

Similar Messages

  • Could not start the listener with a domain user

    Hi all,
    I am working on Windows 2003 with Oracle 10.2.0.2 !
    With user "local system account", I can start the listener and I have no problems!
    after chaning the user that runs the listener from local system account to a domain user, I cannot start the listener again!
    (for the oracle service itself for the database, is it possible to change the user from local system to that domain user without problems)
    attached the error message when starting the listener with cmd.
    by starting the listener with the restart of the windows service, the listener crashed down after a few minutes
    do I have to set additional permissions for that domain user?
    thanks in advance
    Stefan
    C:\Documents and Settings\Administrator>lsnrctl start listener
    LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 17-JAN-2008 11:51:29
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    tnslsnr wird gestartet: Bitte warten...
    TNS-12537: TNS: Verbindung beendet
    TNS-12560: TNS: Fehler bei Protokolladapter
    TNS-00507: Verbindung beendet
    32-bit Windows Error: 109: Unknown error

    In this case I see three error messages:
    TNS-12537:     TNS:connection closed
    Cause:     "End of file" condition has been reached; partner has disconnected.
    Action:     None needed; this is an information message.
    TNS-12560:     TNS:protocol adapter error
    Cause:     A generic protocol adapter error occurred.
    Action:     Check addresses used for proper protocol specification. Before reporting this error, look at the error stack and check for lower level transport errors. For further details, turn on tracing and reexecute the operation. Turn off tracing when the operation is complete.
    TNS-00507:     Connection closed
    Cause:     Normal "end of file" condition has been reached; partner has disconnected.
    Action:     None needed; this is an information message.
    The most important is the tns-12560 error message, this means that an unsupported protocol exception was raised. Assuming you are using the same environment configuration when starting the listener with the local account and starting it with the domain authenticated user, then it has to do with permissions. Both the local administrator account and the domain authenticated user must belong to the ORA_DBA group, otherwise the user won't have enough privileges to start the listener.
    On the other hand, make sure the sqlnet.ora file includes this line:
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    If you use a domain user name, log on under a domain with username and password which has administrative privileges on each node
    ~ Madrid

  • Cannot start the weblogicServer with Java_Option=-native

    Hi *,
    when I start the weblogicServer with the option '-native' it failed. But when I start the server without
    this option it starts (even if the connection to db2 yet does not function, see the problem from me
    befor).
    Here is the startscript
    /usr/java_dev2/jre/sh/java $JAVA_OPTIONS -ms64m -mx64m -classpath $JAVACLASSPATH
    -Dweblogic.class.path=$WEBLOGICCLASSPATH -Dweblogic.home=. -Djava.security.manager
    -Djava.security.policy==/aeu/local/weblogic/weblogic.policy weblogic.Server
    Anybodey an idea, what I must change for this option and for what do I need the option? I find this
    in the documentation.
    Best regards,
    Frank
    Environment is: AIX 4.3.3, JAVA 1.2.2, WeblogicServer 5.1

    Hello,
    For WIley Introscope version 8.0+ Please see this installation guide.
    https://websmp103.sap-ag.de/~sapdownload/011000358700001995842008E
    You want to be on JDK5
    Excerpt:
    SAP J2EE 7.10 and JDK5 specific
    instrumentation, e.g. memory
    allocation. Do not activate for Java
    1.4!
    This is likely your issue.
    Regards,
    Paul

  • How do I make appear the "phone with skype"-link, ...

    How do I make appear the "phone with skype"-link, next to tel numbers on websites, that I visit ?

    Hi, filipfirmout, and welcome to the Community,
    In the Windows version, the settings to enable this are here:
    Tools -> Options -> Advanced -> check in Use Skype to call to links on the web -> Save.
    There is also this: http://www.skype.com/en/download-skype/click-to-call/
    Best regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Can't start the game with original disc

    Hi,
    I have got a macbook air which is published late 2010. I have got an original game disc so before starting the game it wants me to insert the game disc before starting the game. Everything is ok until now, but many times it says 'disc authorization failure', sometimes it starts without showing this issue. When it happens I restart the mac and insert the disc again, then it doesn't show that issue again.
    I also installed windows on my older brothers macbook which is the same model with mine. The same game with the same disc on windows, it doesn't show any error message or anything else.
    I think the problem is about macintosh software. What should I do? How can I fix that problem?
    Note: I use apple's superdrive disc reader to insert the disc. I can see the game disc without problem on finder. In addition, I use Yosemite which is final software.

    You have to use svrmgrl command to get into the server manager. It is not svrmgr30. After that you know how to create the database.
    To create the password file, I think you have to use orapwd command.
    once you enter the orapwd and press enter. it will show you the syntax.
    Regards
    Krishnan.

  • Where to start the journey with conherence

    Hi All,
    I am new to coherence, so would like to know from where I can start exploring cohrence mechanism for caching. I'm trying to explore integrating coherence with webcenter server.
    while installing webcenter stand alone server, even coherence will also gets installed (I guess) since I can see in my middleware home a folder with name "coherence_3.6".
    How can I start using this with my webcenter application? Can anyone help me on this?

    Hi Venky,
    I would suggest you to learn the fundamentals of Coherence and start doing basic exercises and/or examples before integrating to WebCenter. I think the tutorial available at the URL below is very useful for people new to Coherence, as it explains step-by-step the basic installation (stand-alone first), the interaction with Java classes and the basic usage of the Coherence API and then more sophisticated steps like advanced features of Coherence, security, interaction with JPA and WebLogic. The tutorial can be seen at http://download.oracle.com/docs/cd/E18686_01/coh.37/e18692/toc.htm
    Also, I strongly recommend the "Oracle Coherence 3.5" book written by Aleksandar Seovic, Patrick Peralta and Mark Falco, which can be ordered below:
    http://www.packtpub.com/oracle-coherence-35/book
    http://www.amazon.com/Oracle-Coherence-3-5-Aleksandar-Seovic/dp/1847196128
    Finally, when you have certain knowledge of Coherence, you should be able to integrate it with WebCenter. The following URL may be useful for that: http://cfour.fishbowlsolutions.com/2011/03/09/using-webcenter-and-oracle-coherence-together-discussion-and-how-to/
    Hope this helps.
    Thanks,
    Cris

  • Hi there!  could yuo please be so kind and help with a problem which is; my HD disck in my Mac desktop needs to be repaired. after trying to verufy the disc it is asking me to start the computer with another disc which is Mac OS X installation disc and th

    hi there!
    the disk in my Mac desktop need repairing.
    the Disc Utility is asking me to start the computer by running the Mac OS X TIGER installation disc and then repair the disc.
    my question is; 
    by running the disc MAC OS X TIGER  in order to repair it do i run the risk of downgrading the actual operating system of Lion to Tiger (which is 5 years old)?
    thanking you in anticipation.
    Kolindo.

    Kolindo wrote:
    the computer was bought 5 years ago so i have only one disc which is Tiger.
    the lion was bought on line 4 months ago so i have no disc.
    so it meas that i will be downgrading 5 years back if go ahead and do it?
    No, don't do that.  As Dave said, if you're running Lion, use the Recovery HD (partition, actually)  that should be on your internal HD already.  See Using the Recovery HD for details.

  • I want to delete all the songs with broken links at once

    I lost a file with a lot of songs on it and it can't be retrieved.  How can I delete all the song titles with broken links at once without having to delete 500 songs one at a time?

    One way to identify the broken links in your library is to create this set of playlists:
    Lost & Found playlists
    Create a playlist called Found, select everything in Music and drag it into the Found playlist. Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist. They can be deleted with CTRL+A then SHIFT+DELETE.
    Or use iTunes Folder Watch and enable its option to check for dead tracks on startup.
    If you have any Apple devices that could hold the lost media see this user tip.
    Finally, while I'm handing out advice, see this backup tip to avoid this problem again.
    tt2

  • Why is my spotlight search slow/unresponsive in IOS 7... specifically when I start the search with the letters "n" or "c".

    I have an iPhone 5 that must be just over a year old now. I don't remember exactly when this problem started, but I think it was right after updating to IOS 7. The problem is that with certain searches, such as "chrome" or "calender", the spotlight search will basically do nothing. It is somewhat random. Sometimes it will work imidiatly as I am typing it like it usually did. But other times, I will write out the whole word, press search, and still nothing will come up.
    As I was just testing it now, I came up with an interesting discovery. I tested every letter of the alphabet and while 24 of them immidiatly worked fine like usual, it was actually only searches that started with "n" or "c" that did not work. Perhaps the reason I noticed this so much is because some of the apps I use all the time are Chrome, Calender, Notes, Contacts, Calculator, Clock, Camera (wow- just realized how many apps started with "c"!).
    While in spotlight, if I type in C or N and then delete it and try to type another letter that would work normally, it does not work. So if I type in N and then delete it and type in A, A will not come up with results like it would if I just started with A. But if I close and reopend spotlight search and then type in A, it works fine.
    When spotlight search is unresponsive if I wait for about a min sometimes results will actually come up, other times it will sort of crash (it will just randomly close before any results came up).
    I could go on and on with the little details concerning this problem but I do not know what info would/would not be useful to you guys. I have tried restoring my phone from a backup and nothing changed. I am updated to the most recent version. My phone has never been jailbroken and otherwise is in perfect shape.
    Thanks for reading,
    Matt

    I've seen this happen before, and generally turning off Documents and Data in Settings > iCloud will fix it.
    If that doesn't work, try the following.
    1. Restart the phone and check it out.
    2. Reset the phone (hold the home button and the lock button until you see an Apple Logo and then let them go).
    3. Go into Settings > General > Reset > Reset all Settings and test it out again
    4. If none of the above work, try creating either an iTunes backup or an iCloud backup and restore the device as new using iTunes. Here's an article to help with that: http://support.apple.com/kb/ht4137

  • Is is possible to start the Appserver with DOS 'runas' command

    I can do this with tomacat:
    runas /user:myuser /pass:mypassword "location of tomcat"
    is this possible with SUN appserver that comes with the STUDIO for
    both the modes:
    1)Normal Start
    2)Debug

    Not normal but you will need to feel the trackpad actually click, at the login (press hard left bottom corner).  Tap to click isn't available until you log and it can read your preferences.

  • Cant see drop down menu in Report server manager even after starting the explorer with admin previlege - Windows Server 2012

    Hi, 
    I am not able to see drop down menu in report manger, have loaded the internet explorer as administrator still it doesn't pop-up drop down menu in Windows Server 2012 platform and SQL Server 2012, can someone please help me out here, whether any settings
    need to be made? 
    Thanks,
    Harish 

    Hi Omar,
    Thanks for the response, after getting some online help was able to fix the issue, I am using SSRS 2012, below link helped me to resolve the issue in IE 10.0 version
    http://answers.microsoft.com/en-us/ie/forum/ie10-windows_8/set-desktop-ie10-to-always-use-compatibility-view/f09597f0-9c3b-437f-9d33-18b5e1ba078d
    Thanks,
    Harish

  • The page cannot be displayed while running the report with web link

    Hello,
    I tried to run the report using a web link similar:
    http://hostname/reports/rwservlet?report=WRFTCKL.rdf&userid=use/pass@datbase&desformat=pdf&destype=CACHE&paramform=yes
    I am able to see the parameter form, but after I entered some parameter and submit, I got an error as:
    The page cannot be displayed.
    But if I run it with the paramform=no and attached the parameter/value pair at the end of the link, the report will show on the web.
    Anyone knows what is wrong?
    Thanks.

    try this sample report from
    http://www.alexyscorp.com/products.htm
    (Download the Forms Reports Integration based on run_report_object (FMB,RDF) )

  • HOW TO CONSTRUCT THE URL WITH INTRADOCUMENT LINKS (#...)?

    I have a url and i want to access or construct the full URL in jsp without losing the # links in the url. If I make a call to the URL lets say using the below mentioned way. when I issue the request.get... Methods to construct the URL inside the JSP page the #doclink were lost. The issue I have is people who have bookmarked a page like this should be automatically taken to that part of the document where the intra document link is define (or book mark link) using anchor tag.
    Is there any method or technique available to get the full url including the #doclink
    http://www.blahblah.com/blah.jsp?pg=/path/otherpath/blah.html#doclink
    is there a way to do it.
    You help in this regard will be greatly appreciated
    Thanks.

    Hey thanks for your reply, I want how can I retain the #doclink in a JSP page without losing it when someone types something like the below mentioned in the browser address bar. If they have bookmarked it this way, this is the way the browser is going to make the request.
    http://www.blahblah.com/blah.jsp?pg=/path/otherpath/blah.html#doclink
    So, inside the JSP page, getRequestURL, getRequestURI, and getQueryString, helps me reconstruct the URL but the #doclink gets missed. I can use the URLEncoding when it's inside the HREF or something, but when called from a browser the above way, I cant do anything really.
    Your help is greatly appreciated.
    Thanks a lot.

  • Cannot Connect Beige G3 To The Internet With D-Link DGL-4300 Router

    Hiya Folks,
    I cannot connect my Beige G3 Desktop to the Internet using a D-Link DGL-4300 Router.
    When the Computer is connected directly to the cable modem, I can get out onto the net.
    I called D-Link and of course the were of no help.
    Any ideas would be great.
    Thanks
    Dennis

    I explained it in a previous post. Did you read it?
    You need to run two programs before you can log on in old school OS9.
    Both programs are located in your Utilities folder which should be in your OS9 Applications folder.
    The utilities folder is at the bottom of the OS 9 Applications folder.
    When you open the Utilities folder, you should see another folder called Assistants.
    Run the Mac OS Setup Assistant while connected to your router.
    Fill everything out correctly. It should take you directly to the screen that says "would you like to set up your Internet Connection?" Click yes, and follow the instructions.
    Do this and tell me what it says.
    If you do not have the "Assistants" folder in your "Utilities" folder, then your OS9 software was not installed correctly, or when installed, you had no internet connection available so the installer skipped some files.

  • Issue with starting the emctl dbconsole

    Hello All,
    I need your help related to the below issue with the emctl, I am using Oracle 11g R2 on windows XP.
    My enterprise manager was working well.
    But at some day i was not able to start the dbconsole with error net msg
    A service specific error occurred: 1.
    More help is available by typing NET HELPMSG 3547.
    I fixed the issue by modifying the file : C:\app\oracle\product\11.2.0\dbhome_1\VirtualXP-20239_windb\sysman\config
    agentTZRegion=+03:00 instead of agentTZRegion=Europe/Minsk
    But again i faced an issue that localhost_windb is not found so i made a new copy of the folder VirtualXP-20239_windb but with name localhost_windb.
    Now the emctl start dbconsole is working with result sucsseful
    but the emctl staus dbconsole returning that the enterprise manager 11g is not running and i am not able to access my EM.
    Any solution..
    your help pls

    Hello
    It looks like the name of your host has been changed. Have you changed the hostname intentionally or do you use DHCP service for naming your system? You should use a static IP and hostname for DB system (please refer to installation requirements).
    If your hostname has been changed, DBControl needs to be dropped and re-created.
    Please read MOS [ID 467598.1] The Database Console Fails to Start After a Change in the Hostname:
    Please read MOS [ID 278100.1] How To Drop, Create And Recreate DB Control In A 10g/11g Database
    Regards
    Gokhan

Maybe you are looking for