Start-up apps question
Hello guys, I want to make my Y50 as fast as possible and I was wondering which of the following start up applications are okay to disable, thanks in advance
Link to image
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums
My rule of thumb is that anything you installed after getting the computer can be turned off. As for the software that came with the computer, just do a Google. Find out what the software does, and decide if you need it. By definition all startup apps can be stopped. But you may want that functionality. For instance it does not make sense in turning off your Antivirus scanner so it should be left turned on. The rest is a personal decision.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com
Similar Messages
-
How can I start an app on OSX Mavericks without switching to it?
What's up to all my Appleheads!
I usually do my research (extensively if I'm particularly annoyed) regarding any of my Apple questions, but I can't seem to find an answer to the following:
Let's say I'm working in a full screen app (e.g. - Safari) window/space and I bring up spotlight/dock/launchpad to initiate/open/start an app, how can I prevent Mavericks from automatically "pulling" me to the designated window where the app is loading? I would like to be able to continue working on whatever it is I'm working on while at the same time have my app of choice start up in the "background" without being brought to it while it's still starting up. I know I'm not the only person that finds this behavior annoying, as I've seen it phrased a number of ways, but this question in particular hasn't been addressed (that I can find).
A little info:
Early 2011 13" MBP
8gb RAM
500gb HDD
OSX 10.9.4
P.S. I've already tried the 'When switching to an application, switch to a Space with open windows for that application' within Mission Control settings. This does not yield the result I am searching for.Welcome to the Apple Support Communities
On the iPhone, open Settings > iTunes and App Store, and turn off Apps -
Ssh X11 forwarding takes too long to start any app. remotely
Hi,
I have a bizzare problem with %subject% for some time already.
Affected are all my Arch linux installations (all with: systemd, openbox (without Display Manager), and latest updates):
1. home desktop (core 2 duo, 2.4GHz, 3GB RAM).
2. one testing desktop in virtualbox on the desktop from prev. point.
3. work laptop (Intel Core i5, 4GB RAM).
All of these are connected via cable to the same home network 100MB router (using openwrt on asus wl-500g).
Normal ssh transmissions, like entering commands, or transfer of data via scp (even large amount of data for testing purposes because of this) works quick like expected.
The problem is, that if I try to start app. remotely via ssh X forwarding from and to any of these (affected also bidirectional), it takes always aprox. 2 minutes to start the app.
Afterwards, it works fast and fine.
Doesn't change anything, whether the X server is running on the server's side or not.
Have been testing it with some lightweight apps too, but makes no difference if it's e.g. mousepad, gedit, thunderbird, always the same 2 min. delay at their start.
Also, some time ago, I had an older (more than 10 years) laptop, also with Arch installed, using LXDE, and connected via wifi to this same router, which worked perfectly without any delay. Also the same time ago, I was yet running Ubuntu on the home desktop, when I installed Arch to the virtualbox mentioned in point 2, and the problem was already present on the virtual pc, but not on the Ubuntu or the older laptop with Arch I had before.
Later, when I switched home desktop to Arch (or I got new laptop in the work), the issue appeared instantly on the new Arch installations.
The sshd configuration is the basic from the package, with X forwarding enabled of course, thus no strange changes of mine.
I monitored the ssh communications with tcpdump, not to read the encrypted data itself , but to see whether the data is flowing, and there are flow outages (absolute quiet except of below mentioned exceptions) in the mentioned 2 minutes duration till app. startup:
- after ssh authentication, there is about 1 minute silence, when after this 1st minute some few data is flowing
- next, there is another 1 minute silence, after which the app. finally starts
I've also gathered ssh debugging informations, from both, server (where I'm connecting and trying to start app. remotely) and client, with description when waiting has been detected.
server:
/usr/sbin/sshd -ddd
debug2: load_server_config: filename /etc/ssh/sshd_config
debug2: load_server_config: done config len = 501
debug2: parse_server_config: config /etc/ssh/sshd_config len 501
debug3: /etc/ssh/sshd_config:15 setting ListenAddress 0.0.0.0
debug3: /etc/ssh/sshd_config:16 setting ListenAddress ::
debug3: /etc/ssh/sshd_config:35 setting LogLevel INFO
debug3: /etc/ssh/sshd_config:42 setting PermitRootLogin no
debug3: /etc/ssh/sshd_config:52 setting AuthorizedKeysFile .ssh/authorized_keys
debug3: /etc/ssh/sshd_config:68 setting PermitEmptyPasswords no
debug3: /etc/ssh/sshd_config:71 setting ChallengeResponseAuthentication no
debug3: /etc/ssh/sshd_config:92 setting UsePAM yes
debug3: /etc/ssh/sshd_config:94 setting AllowAgentForwarding yes
debug3: /etc/ssh/sshd_config:95 setting AllowTcpForwarding yes
debug3: /etc/ssh/sshd_config:97 setting X11Forwarding yes
debug3: /etc/ssh/sshd_config:98 setting X11DisplayOffset 10
debug3: /etc/ssh/sshd_config:99 setting X11UseLocalhost yes
debug3: /etc/ssh/sshd_config:104 setting UsePrivilegeSeparation sandbox
debug3: /etc/ssh/sshd_config:106 setting Compression delayed
debug3: /etc/ssh/sshd_config:109 setting UseDNS no
debug3: /etc/ssh/sshd_config:120 setting Subsystem sftp /usr/lib/ssh/sftp-server
debug1: sshd version OpenSSH_6.1p1
debug3: Incorrect RSA1 identifier
debug1: read PEM private key done: type RSA
debug1: private host key: #0 type 1 RSA
debug3: Incorrect RSA1 identifier
debug1: read PEM private key done: type DSA
debug1: private host key: #1 type 2 DSA
debug3: Incorrect RSA1 identifier
debug1: read PEM private key done: type ECDSA
debug1: private host key: #2 type 3 ECDSA
debug1: rexec_argv[0]='/usr/sbin/sshd'
debug1: rexec_argv[1]='-ddd'
debug3: oom_adjust_setup
Set /proc/self/oom_score_adj from 0 to -1000
debug2: fd 3 setting O_NONBLOCK
debug3: sock_set_v6only: set socket 3 IPV6_V6ONLY
debug1: Bind to port 22 on ::.
Server listening on :: port 22.
debug2: fd 4 setting O_NONBLOCK
debug1: Bind to port 22 on 0.0.0.0.
Server listening on 0.0.0.0 port 22.
debug3: fd 5 is not O_NONBLOCK
debug1: Server will not fork when running in debugging mode.
debug3: send_rexec_state: entering fd = 8 config len 501
debug3: ssh_msg_send: type 0
debug3: send_rexec_state: done
debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8
debug1: inetd sockets after dupping: 3, 3
Connection from CLIENT_IP port 43333
debug1: Client protocol version 2.0; client software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.1
debug2: fd 3 setting O_NONBLOCK
debug3: ssh_sandbox_init: preparing seccomp filter sandbox
debug2: Network child is on pid 6379
debug3: preauth child monitor started
debug3: privsep user:group 99:99 [preauth]
debug1: permanently_set_uid: 99/99 [preauth]
debug3: ssh_sandbox_child: setting PR_SET_NO_NEW_PRIVS [preauth]
debug3: ssh_sandbox_child: attaching seccomp filter program [preauth]
debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
debug1: SSH2_MSG_KEXINIT sent [preauth]
debug1: SSH2_MSG_KEXINIT received [preauth]
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 [preauth]
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
debug2: kex_parse_kexinit: none,[email protected] [preauth]
debug2: kex_parse_kexinit: none,[email protected] [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: first_kex_follows 0 [preauth]
debug2: kex_parse_kexinit: reserved 0 [preauth]
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 [preauth]
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss [preauth]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
debug2: kex_parse_kexinit: none,[email protected],zlib [preauth]
debug2: kex_parse_kexinit: none,[email protected],zlib [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: first_kex_follows 0 [preauth]
debug2: kex_parse_kexinit: reserved 0 [preauth]
debug2: mac_setup: found hmac-md5 [preauth]
debug1: kex: client->server aes128-ctr hmac-md5 none [preauth]
debug2: mac_setup: found hmac-md5 [preauth]
debug1: kex: server->client aes128-ctr hmac-md5 none [preauth]
debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
debug3: mm_key_sign entering [preauth]
debug3: mm_request_send entering: type 4 [preauth]
debug3: mm_key_sign: waiting for MONITOR_ANS_SIGN [preauth]
debug3: mm_request_receive_expect entering: type 5 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 4
debug3: mm_answer_sign
debug3: mm_answer_sign: signature 0x13e3f80(100)
debug3: mm_request_send entering: type 5
debug2: monitor_read: 4 used once, disabling now
debug2: kex_derive_keys [preauth]
debug2: set_newkeys: mode 1 [preauth]
debug1: SSH2_MSG_NEWKEYS sent [preauth]
debug1: expecting SSH2_MSG_NEWKEYS [preauth]
debug2: set_newkeys: mode 0 [preauth]
debug1: SSH2_MSG_NEWKEYS received [preauth]
debug1: KEX done [preauth]
debug1: userauth-request for user USERNAME service ssh-connection method none [preauth]
debug1: attempt 0 failures 0 [preauth]
debug3: mm_getpwnamallow entering [preauth]
debug3: mm_request_send entering: type 6 [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 6
debug3: mm_answer_pwnamallow
debug2: parse_server_config: config reprocess config len 501
debug3: mm_answer_pwnamallow: sending MONITOR_ANS_PWNAM: 1
debug3: mm_request_send entering: type 7
debug2: monitor_read: 6 used once, disabling now
debug3: mm_getpwnamallow: waiting for MONITOR_ANS_PWNAM [preauth]
debug3: mm_request_receive_expect entering: type 7 [preauth]
debug3: mm_request_receive entering [preauth]
debug2: input_userauth_request: setting up authctxt for USERNAME [preauth]
debug3: mm_start_pam entering [preauth]
debug3: mm_request_send entering: type 45 [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 45
debug1: PAM: initializing for "USERNAME"
debug1: PAM: setting PAM_RHOST to "CLIENT_IP"
debug1: PAM: setting PAM_TTY to "ssh"
debug2: monitor_read: 45 used once, disabling now
debug3: mm_inform_authserv entering [preauth]
debug3: mm_request_send entering: type 3 [preauth]
debug2: input_userauth_request: try method none [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 3
debug3: mm_answer_authserv: service=ssh-connection, style=
debug2: monitor_read: 3 used once, disabling now
debug1: userauth-request for user USERNAME service ssh-connection method publickey [preauth]
debug1: attempt 1 failures 0 [preauth]
debug2: input_userauth_request: try method publickey [preauth]
debug1: test whether pkalg/pkblob are acceptable [preauth]
debug3: mm_key_allowed entering [preauth]
debug3: mm_request_send entering: type 20 [preauth]
debug3: mm_key_allowed: waiting for MONITOR_ANS_KEYALLOWED [preauth]
debug3: mm_request_receive_expect entering: type 21 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 20
debug3: mm_answer_keyallowed entering
debug3: mm_answer_keyallowed: key_from_blob: 0x13e1e20
debug1: temporarily_use_uid: 1000/100 (e=0/0)
debug1: trying public key file /home/USERNAME/.ssh/authorized_keys
debug1: Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys': No such file or directory
debug1: restore_uid: 0/0
Failed publickey for USERNAME from CLIENT_IP port 43333 ssh2
debug3: mm_answer_keyallowed: key 0x13e1e20 is not allowed
debug3: mm_request_send entering: type 21
debug2: userauth_pubkey: authenticated 0 pkalg ssh-dss [preauth]
debug1: userauth-request for user USERNAME service ssh-connection method password [preauth]
debug1: attempt 2 failures 1 [preauth]
debug2: input_userauth_request: try method password [preauth]
debug3: mm_auth_password entering [preauth]
debug3: mm_request_send entering: type 10 [preauth]
debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD [preauth]
debug3: mm_request_receive_expect entering: type 11 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 10
debug3: PAM: sshpam_passwd_conv called with 1 messages
debug1: PAM: password authentication accepted for USERNAME
debug3: mm_answer_authpassword: sending result 1
debug3: mm_request_send entering: type 11
debug3: mm_request_receive_expect entering: type 46
debug3: mm_request_receive entering
debug1: do_pam_account: called
debug3: PAM: do_pam_account pam_acct_mgmt = 0 (Success)
debug3: mm_request_send entering: type 47
Accepted password for USERNAME from CLIENT_IP port 43333 ssh2
debug3: mm_auth_password: user authenticated [preauth]
debug3: mm_do_pam_account entering [preauth]
debug3: mm_request_send entering: type 46 [preauth]
debug3: mm_request_receive_expect entering: type 47 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_do_pam_account returning 1 [preauth]
debug3: mm_send_keystate: Sending new keys: 0x13e1c40 0x13e34c0 [preauth]
debug3: mm_newkeys_to_blob: converting 0x13e1c40 [preauth]
debug3: mm_newkeys_to_blob: converting 0x13e34c0 [preauth]
debug3: mm_send_keystate: New keys have been sent [preauth]
debug3: mm_send_keystate: Sending compression state [preauth]
debug3: mm_request_send entering: type 24 [preauth]
debug3: mm_send_keystate: Finished sending state [preauth]
debug1: monitor_read_log: child log fd closed
debug1: monitor_child_preauth: USERNAME has been authenticated by privileged process
debug3: mm_get_keystate: Waiting for new keys
debug3: mm_request_receive_expect entering: type 24
debug3: mm_request_receive entering
debug3: mm_newkeys_from_blob: 0x13f3b20(122)
debug2: mac_setup: found hmac-md5
debug3: mm_get_keystate: Waiting for second key
debug3: mm_newkeys_from_blob: 0x13f3b20(122)
debug2: mac_setup: found hmac-md5
debug3: mm_get_keystate: Getting compression state
debug3: mm_get_keystate: Getting Network I/O buffers
debug3: mm_share_sync: Share sync
debug3: mm_share_sync: Share sync end
debug3: ssh_sandbox_parent_finish: finished
debug1: PAM: establishing credentials
debug3: PAM: opening session
User child is on pid 6387
debug1: PAM: establishing credentials
debug1: permanently_set_uid: 1000/100
debug2: set_newkeys: mode 0
debug2: set_newkeys: mode 1
debug1: Entering interactive session for SSH2.
debug2: fd 7 setting O_NONBLOCK
debug2: fd 9 setting O_NONBLOCK
debug1: server_init_dispatch_20
debug1: server_input_channel_open: ctype session rchan 0 win 2097152 max 32768
debug1: input_session_request
debug1: channel 0: new [server-session]
debug2: session_new: allocate (allocated 0 max 10)
debug3: session_unused: session id 0 unused
debug1: session_new: session 0
debug1: session_open: channel 0
debug1: session_open: session 0: link with channel 0
debug1: server_input_channel_open: confirm session
debug1: server_input_global_request: rtype [email protected] want_reply 0
debug1: server_input_channel_req: channel 0 request x11-req reply 1
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req x11-req
debug3: sock_set_v6only: set socket 10 IPV6_V6ONLY
debug2: fd 10 setting O_NONBLOCK
debug3: fd 10 is O_NONBLOCK
debug1: channel 1: new [X11 inet listener]
debug2: fd 11 setting O_NONBLOCK
debug3: fd 11 is O_NONBLOCK
debug1: channel 2: new [X11 inet listener]
debug1: server_input_channel_req: channel 0 request exec reply 1
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req exec
debug2: fd 3 setting TCP_NODELAY
debug3: packet_set_tos: set IP_TOS 0x10
debug2: fd 14 setting O_NONBLOCK
debug2: fd 13 setting O_NONBLOCK
debug2: fd 16 setting O_NONBLOCK
debug2: channel 0: read 210 from efd 16
debug2: channel 0: rwin 2097152 elen 210 euse 1
debug2: channel 0: sent ext data 210
debug2: channel 0: read 380 from efd 16
debug2: channel 0: rwin 2096942 elen 380 euse 1
debug2: channel 0: sent ext data 380
debug2: channel 0: read 121 from efd 16
debug2: channel 0: rwin 2096562 elen 121 euse 1
debug2: channel 0: sent ext data 121
### Here started the waiting on the server's side, and continued later till the start of app.:
debug1: X11 connection requested.
debug2: fd 12 setting TCP_NODELAY
debug2: fd 12 setting O_NONBLOCK
debug3: fd 12 is O_NONBLOCK
debug1: channel 3: new [X11 connection from 127.0.0.1 port 46968]
debug2: channel 3: open confirm rwindow 2097152 rmax 16384
debug2: channel 0: read 62 from efd 16
debug2: channel 0: rwin 2096441 elen 62 euse 1
debug2: channel 0: sent ext data 62
debug1: X11 connection requested.
debug2: fd 15 setting TCP_NODELAY
debug2: fd 15 setting O_NONBLOCK
debug3: fd 15 is O_NONBLOCK
debug1: channel 4: new [X11 connection from 127.0.0.1 port 46972]
debug2: channel 4: open confirm rwindow 2097152 rmax 16384
debug2: channel 3: rcvd adjust 51268
debug2: channel 3: rcvd adjust 65536
debug2: channel 3: rcvd adjust 65536
debug2: channel 3: rcvd adjust 65536
debug2: channel 3: rcvd adjust 65536
debug2: channel 3: rcvd adjust 32768
debug2: channel 3: rcvd adjust 147456
debug2: channel 3: rcvd adjust 55788
debug2: channel 3: window 32740 sent adjust 32796
client:
ssh -Xvvv USERNAME@SERVER_IP mousepad
OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to SERVER_IP [SERVER_IP] port 22.
debug1: Connection established.
debug1: identity file /home/USERNAME/.ssh/id_rsa type -1
debug1: identity file /home/USERNAME/.ssh/id_rsa-cert type -1
debug1: identity file /home/USERNAME/.ssh/id_dsa type 2
debug1: identity file /home/USERNAME/.ssh/id_dsa-cert type -1
debug1: identity file /home/USERNAME/.ssh/id_ecdsa type -1
debug1: identity file /home/USERNAME/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.1
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "SERVER_IP" from file "/home/USERNAME/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /home/USERNAME/.ssh/known_hosts:4
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ECDSA ABC123...
debug3: load_hostkeys: loading entries for host "SERVER_IP" from file "/home/USERNAME/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /home/USERNAME/.ssh/known_hosts:4
debug3: load_hostkeys: loaded 1 keys
debug1: Host 'SERVER_IP' is known and matches the ECDSA host key.
debug1: Found key in /home/USERNAME/.ssh/known_hosts:4
debug1: ssh_ecdsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/USERNAME/.ssh/id_rsa ((nil))
debug2: key: /home/USERNAME/.ssh/id_dsa (0x)
debug2: key: /home/USERNAME/.ssh/id_ecdsa ((nil))
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/USERNAME/.ssh/id_rsa
debug3: no such identity: /home/USERNAME/.ssh/id_rsa
debug1: Offering DSA public key: /home/USERNAME/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug1: Trying private key: /home/USERNAME/.ssh/id_ecdsa
debug3: no such identity: /home/USERNAME/.ssh/id_ecdsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
USERNAME@SERVER_IP's password:
debug3: packet_send2: adding 48 (len 68 padlen 12 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to SERVER_IP ([SERVER_IP]:22).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting [email protected]
debug1: Entering interactive session.
debug2: callback start
debug2: x11_get_proto: /usr/bin/xauth -f /tmp/ssh-mHE6faU7YJF2/xauthfile generate :0 MIT-MAGIC-COOKIE-1 untrusted timeout 1200 2>/dev/null
debug2: x11_get_proto: /usr/bin/xauth -f /tmp/ssh-mHE6faU7YJF2/xauthfile list :0 2>/dev/null
debug1: Requesting X11 forwarding with authentication spoofing.
debug2: channel 0: request x11-req confirm 1
debug2: fd 3 setting TCP_NODELAY
debug3: packet_set_tos: set IP_TOS 0x10
debug2: client_session2_setup: id 0
debug1: Sending command: mousepad
debug2: channel 0: request exec confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: X11 forwarding request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: exec request accepted on channel 0
### After successful authentication, here above started the first waiting, where after first 1 min. continued with:
debug2: channel 0: rcvd ext data 210
debug2: channel 0: rcvd ext data 380
debug2: channel 0: rcvd ext data 121
debug3: Copy environment: XDG_SESSION_COOKIE=0d937ee20c7e42bdbf828421a30eaa2f-1357144247.348263-1841400888
debug3: Copy environment: XDG_SESSION_ID=5
debug3: Copy environment: XDG_RUNTIME_DIR=/run/user/1000
debug2: channel 0: written 711 to efd 6
### After another 1 min. continued with + started the app.
debug1: client_input_channel_open: ctype x11 rchan 3 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 46968
debug2: fd 7 setting O_NONBLOCK
debug3: fd 7 is O_NONBLOCK
debug1: channel 1: new [x11]
debug1: confirm x11
debug2: channel 0: rcvd ext data 62
Xlib: extension "RANDR" missing on display "localhost:10.0".
debug2: channel 0: written 62 to efd 6
debug1: client_input_channel_open: ctype x11 rchan 4 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 46972
debug2: fd 8 setting O_NONBLOCK
debug3: fd 8 is O_NONBLOCK
debug1: channel 2: new [x11]
debug1: confirm x11
debug2: channel 1: window 2045884 sent adjust 51268
debug2: channel 1: window 2031616 sent adjust 65536
debug2: channel 1: window 2031616 sent adjust 65536
debug2: channel 1: window 2031616 sent adjust 65536
debug2: channel 1: window 2031616 sent adjust 65536
debug2: channel 1: window 2031616 sent adjust 32768
debug2: channel 1: window 1949696 sent adjust 147456
debug2: channel 1: window 2041364 sent adjust 55788
debug2: channel 1: rcvd adjust 32796
debug1: client_input_channel_open: ctype x11 rchan 5 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 46974
debug2: fd 9 setting O_NONBLOCK
debug3: fd 9 is O_NONBLOCK
debug1: channel 3: new [x11]
debug1: confirm x11
debug2: channel 1: rcvd adjust 32800
It's quite strange, as I have no more ideas what to check next.
Any ideas pls?
thx in advance.Have finally found a solution for this problem: http://serverfault.com/questions/490352 … w-to-start
Now the applications do start immediately via SSH X11 forwarding as expected.
The following three lines helped:
ip6tables -A INPUT -i lo -j ACCEPT
ip6tables -A OUTPUT -o lo -j ACCEPT
ip6tables -A FORWARD -i lo -o lo -j ACCEPT
While until now, all ip6 traffic has been forbidden (to drop all ip6 traffic) at the start of the system of course.
Nevertheless, I don't understand it, why the ip6 localhost has to be granted this way even if the /etc/ssh/sshd_config is configured for ip4 only "AddressFamily inet"?
I thought, that this way the sshd will be using ip4 protocol only (including for the X11 forwarding), then why does it still need the ip6? -
What do I need to start developing apps?
Hello good people of the internet! I have a question about how I would start to develop apps for iOS, so I decided to come to the source.
Here's my backround. I grew up with PC's and I love tinkering with things. I'm a PC gamer who loves to mod games and screw around with those kind of things. I'm a college student studying Aerospace Engineering, but I have pretty much no coding background. I have a PC laptop (2 year old Toshiba Qosmio), an iPhone 4s (in the shop because the battery's rusted), and an iPad Air. I am eager to learn to make iOS app because it is a skill that particularly interests me and it looks like fun.
My question is, what do I need to do to start developing apps. I know I need a Mac, so what Macs have enough horsepower to develop apps? What coding language(s) do I have to learn? Where can I learn said coding language(s)? Where do I get the app development software, and how much does it cost? How do I get my finished apps onto the App Store?
I thank the good people of this forum who have taken the time to view my question, and I give even more thanks to those who respond.
Grazie mille!
-MattAny recent Mac will work.
Check out https://developer.apple.com -
Which webstart version is starting my app ?? [confused...]
I'm a bit confused, but maybe someone can help me out.
This is the situation:
-> Installed on my Windows machine:
* JRE 1.5.0 (of JDK, that's the same)
* also a JRE 1.4.2_07
* a firewall
* IE or firefox browser (with mime-type "application/x-javajnlp-file" mapped correctly).
-> a webapp on some (web)server (also with mime-type correctly configured). The webapp contains the necessary resources (jars, jnlp file).
-> here's the jnlp file:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.0+" codebase="http://server1/someapp" href="someapp.jnlp">
<information>
<title>Some App</title>
<vendor>Sun Microsystems, Inc.</vendor>
<offline-allowed/>
</information>
<resources>
<jar href="app1.jar"/>
<j2se version="1.4.2*" href="http://java.sun.com/products/autodl/j2se"/>
</resources>
<application-desc main-class="myapp"/>
</jnlp>
-> while starting the app, i notice that, i guess the 1.5 java webstart engine handles this app (it seems to be 1.5 stuff when i look at the layout of the dialog). BUT (!) the only traffic passing my firewall is that of the following application: .../jre1.4.2_07/bin/javaw.exe. So, th� question is: "what "java web start - version" (*) is actually running my code ??
(*) i'm not talking about the JRE. That should be 1.4.2_07, since i asked, in the jnlp, for my code to run in a 1.4.2* JRE. But there must be some javaws active, f.i. for examining my app jars on the webserver.
P.S. when i change the <j2se version ...> into 1.5+, the request i intercept then is actually coming from jre1.5.0_05/bin/javaw.exe (which i expected in the first place).
help.Yes - in this case you run webstart 1.5.0 with jre 1.4.7
the jnlp mime type is setup by the windows installer when installing a jre that is the latest on the system. (it actually points to <windows dir>/system32/javaws.exe, which is set up as the latest version installed)
/Andy -
Shutdown screen randomly pops up when I start an app or try to charge
At first, the wake/sleep and volume up buttons, when pressed, would seem to activate each other. So whenever I'd go to turn the volume up my ipod would go into sleep mode and whenever I'd try to put the ipod into sleep mode the volume would get turned up. Very annoying and frustrating! Over time that problem subsided and I haven't experienced that problem in a long time, but every since then, whenever I start an app I've downloaded or plug the ipod in to charge, the shut down screen randomly pops up! Other than these rather annoying "glitches", my ipod has been working fine. I was thinking of waiting for the next software update before I send it in for repairs to see if that might fix the problem because I really do depend on my ipod in my day-to-day life. So I guess I have a few questions:
Has anyone else experienced theese problems?
Does anyone know whats going on with my ipod?
When is the next software update after 2.2 going to be available?Hi,
Do you have a protective case on the iPod touch? If you do, try testing without the case.
Does the iPod have any signs of accidental damage or abuse?
Try resetting the iPod by holding the Home and Sleep/Wake buttons until you see the Apple logo as described here: http://docs.info.apple.com/article.html?artnum=305743
If the issue persists, try restoring the iPod touch. This article: http://support.apple.com/kb/HT1414 will walk you through the restore process.
If the issue is not resolved by restoring the iPod, make a reservation with a Genius or call AppleCare.
http://www.apple.com/retail/geniusbar/
U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
-Jason -
Starting an App using Admin Console - confusing message
I tried starting my 'App' and the messages indicate success but say failure.
I am confused.
Here is a CUT/PASTE of the "Progress of Activation (Entire Domain)" window.
I also attach my config file for consideration...
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
********CHECKING SYSTEM RESOURCES
Security=NONE
********ACTIVATING ADMINISTRATIVE SERVERS ON MASTER SITE
Could not Activate the Administrative Servers.
Domain=poc
Master=PACEMid1 [A.Central.poc.customs.gov.au]
State=INACTIVE
Options=LAN,MIGRATE
[Operation: SET T_DOMAIN STATE:ACTIVE]
[Message: Success]
The activation attempt has failed. Check
the information printed above for possible
reasons for the failure.
******END OF MESSAGES******
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
[config.txt]Lyall,
You are corect that you only need the compiled TUXCONFIG file on the
master machine, the boot process will propagate it to the other machines.
I am unclear as to what your problem is now, where is the boot failing?
Are there any errors in the ULOG file on the master machine, or the
other machine?
The tlisten process must be started manually (or via UNIX startup
scripts) the tmboot brings up application servers. This application
boot process that may require the tlisten to be running in advance.
There is no way that the boot process "thinks it is starting the tlisten"
Please post some more information about what your current problem is!
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of
the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Lyall Pearce wrote:
Thankyou Peter for responding so quickly.
I am still having difficulty. (Linux unix in case you are wondering)
The admin console thinks it is ok starting the master (cos it thinks it is starting
the tlisten process when I know one is already running)
[tuxadm@PACEMid1 poc]$ ps -fae | grep tlisten
tuxadm 14653 1 0 18:10 pts/10 00:00:00 tlisten -l //PACEMid1:12344
tuxadm 14799 11238 0 18:29 pts/10 00:00:00 grep tlisten
[tuxadm@PACEMid1 poc]$
It also thinks that it is not running on the second machine and so, fails to start
up the second machine. I know the tlisten is running on the second machine.
[tuxadm@PACEMid2 poc]$ ps -afe | grep tlisten
tuxadm 2891 1 0 08:51 pts/8 00:00:00 tlisten -l //PACEMid2:12344
tuxadm 2954 1111 0 09:04 pts/8 00:00:00 grep tlisten
[tuxadm@PACEMid2 poc]$
The admin console shows the full configuration (wonderful stuff really)
My config file has been updated now that I understand the difference between NADDR
and NLSADDR (maybe some synonyms in these config files that are more intuitive
would be helpful!)
I have only shown what I understand to be the relevant networking entries here.
*MACHINES
"PACEMid1"
LMID = "Central.A.poc.customs.gov.au"
TUXDIR = "/opt/bea/tuxedo8.0"
APPDIR = "/home/tuxadm/poc"
TUXCONFIG = "/home/tuxadm/poc/tuxconfig.poc.customs.eds.au"
"PACEMid2"
LMID = "Adl.A.poc.customs.gov.au"
TUXDIR = "/opt/bea/tuxedo8.0"
APPDIR = "/home/tuxadm/poc"
TUXCONFIG = "/home/tuxadm/poc/tuxconfig.poc.customs.eds.au"
*NETWORK
"Central.A.poc.customs.gov.au"
NADDR = "//205.239.97.151:12345"
NLSADDR = "//205.239.97.151:12344"
"Adl.A.poc.customs.gov.au"
NADDR = "//205.239.97.198:12345"
NLSADDR = "//205.239.97.198:12344"
In summary:
I seem to be in control of the master machine by default since it gives the impression
it is starting it's own tlisten process (which I am unable to find).
I am not in control of the second machine.
I have compiled the Config file on the master machine only (it does not exist
on the second machine), I gather that it will be replicated to the second machine.
..Lyall -
Starting regular apps like google chrome is taking a lot longer. Why is this happening?
Starting regular apps like google chrome is taking a lot longer. Why is this happening?
Hey judybh,
Thanks for the question. After reviewing your post, it sounds like apps are slow to load or the Mac itself is slow. There are a number of potential causes that you can check by following this article.
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Hi,
I'm having problems starting an essbase application. all the services are running, everything looks ok. But when trying to start the app or any of the databases of that app it gives an error ' unable to load database'
Version is 11.1.1.1 and it's on unix
Any help will be verymuch appreciatedHi,
Can you start other applications, if so then you might have an orphaned esssvr process.
If all the apps are stopped and you see a esssvr process running you will need to kill it.
Cheers
John
http://john-goodwin.blogspot.com/ -
I updated to ios7 on my iphone 4 and now cant install apps and one app says waiting for 2 days now. Also it started ading apps from my wife's phone onto my phone even though we have separate apple ids.
We do not share an apple ID and her phone is now logged in with her account and I have since backed it up on itunes under her account as well. I have turned off automatic downloads on her phone but they still keep downloading. I delete one app and then another one just appears on the phone.
-
this is a weird start to my question; but i went to a music festival today and I was in a mosh pit and it was hot, and my iPhone 4 turned off and I was wondering weather it was from the heat or something else? And what I could do to fix it? Thankyou
okay, thankyou for you help anyway
-
Error when starting DPS App Builder - Application not found
WTF folks.
This morning I open my document (CS5) and it says I have to update my folio tools (needless to say i hate it to be forced to do an update before I can start working).
Well, I do an update, both tools (Folio Builder and Producer Tools).
Now there seem to be some changes, I cant refresh my folio via menu anymore. When choosing the new "build app"-option I get an error :
"An error occured while starting DPS App Builder. The DPS App-Builder Application was not found" (translated).
German original version: "Beim Starten von DPS App Builder ist ein Fehler aufgetreten. Die DPS App Builder-Anwendung wurde nicht gefunden."
Any Solutions? Where to get the mysterious "App-Builder Application?"
edit: refresh is now only possible inside the folio it seems.App Builder is nothing but a new name to Viewer Builder. Download it from DPS Dashbaord.
-
"Couldn't start this app" error when trying to open Action Items and any other built-in apps
Hi all,
When I try to open the Action Items app within an email in OWA, I get the error seen in the screenshot. In Outlook 2013, the frame comes up with a 404 error.
Third party apps load fine.
This is a new install of Exchange 2013 Enterprise with CU2. Everything else seems to be working fine. I have tried rebooting the server and disabling and re-enabling the apps with no luck. Can't seem to find anything in the Event Log about it.
Any ideas why this would happen and how to fix it?
"Something went wrong and we couldn't start this app"Hi,
Could you please check the IIS log and see what’s the error code?
Try using the administrator account to log in the Outlook and see if he can see the apps successfully.
Thanks,
Simon
If you have feedback for TechNet Subscriber Support, contact
[email protected]
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Starting random apps and screen flicker when scrolling
My Touch 2G suddenly started to launch random apps without me touching the screen. Besides starting random apps the screen flickers when scrolling. Any body have experienced the same? It started about 1 month ago and I have always taken good care of it. I have tried every possible thing I can think of when it comes to software. Full restore, jailbreak, full restore, back to factory, back to earlier versions of IOS, but no luck. It is pretty persistent. I am sure it is hardware related and don't mind paying to have it fixed. I tried two repairshops already and they were not able to recover the reason for the malfunction. I wonder whether there is anybody who has experienced the same or even knows what is wrong?
Hey Kimwaldal,
Thanks for using Apple Support Communities.
Sounds like the devices are opening things on their own. You may want to follow this article to make sure the screens are working correctly.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Have a nice day,
Mario -
Ok all, I have two app questions.
1. Ever since the IOS 5.1 update, some streams on Tune In Radio Pro do not play in stereo and I can't find a way to fix it! I've tried turning mono audio on and off, turning AAC streams on and off, and still nothing. Could it be that my phone is complaining that it doesn't have a sim card? That's my only theory at this point. I thought it had something to do with the stream bitrate and I have been working with the TuneIn support to try and get to the bottom of this, but nothing has worked. I thought it was just the 32 kbps and 48 kbps aac streams affected, but it seems to be all on some streaming providers. Here's some of the stations I've logged mono audio on, in Spokane, KZZU and KZBD, in Saint Lewis, WARH, in DC WRQX, in New York WPLJ, in Portland Maine WHOM, in Philidelphia WBEN, and in Yakima KFFM. These are all 32 or 48 kbps streams. I can't get stereo on KQMV or KLCK in Seattle, haven't tried KLCK actually as I listen to that enough over the air, I am just basing that one on how TuneIn is acting. I can also get KFFM in stereo via Radio Pup, so in that instance, it seems to be just a TuneIn issue. WBEN is also on IHeart Radio and does not come in in stereo on either app. I didn't mention KFAT in Ankorage, AK because they are with one of the providers that doesn't seem to have a stereo aac stream on TuneIn at all. Other stations in this category dealing with two providers here, WCLI in Dayton, OH, WJDQ Meridian MS, KMGL Oklahoma City, KLMY in Long Beach WA, not listed in a market on TuneIn, KRXY in Shelton also not listed under a city, and I feel like I am forgetting a few but that's most of them. If I didn't mention it before, KQMV and KLCK have 64 kbps aac streams as well as 32 kbps aac streams, problem only occurs on 32 kbps streams there. Any solution?
2. Now this next question will go really fast. TuneIn must use some kind of audio capturing software to record, but you can only do that with TuneIn stations. Is there a way to do this with other apps, such as the hd radio that works with the Ibiquity app in the app store?Well, here's the skinny then. If it's an isolated issue and you cannot provide a way of replicating the problem, the Apple does not consider it an OS X problem. Rather it's a problem with the third-party software. Given what you have reported I'd tend to agree with that viewpoint.
There are some third-party utilities that enable audio capture from applications that don't support it themselves. The best of them is Audio Hijack Pro 2.10.3. I highly recommend it.
If you are interested in Internet radio then you should check out Radium 2.8.3 and/or World Radio 2.0 and/or Radioshift 1.6.7. The last one will record its audio.
Maybe you are looking for
-
CD/DVD Drive functionality on Equium EA60
Hi! I have an Equium EA60-155 Laptop which has a Mat****a DVD-RAM UJ-820S CD-ROM drive (According to information provided in 'Device Manager') The drive tray is labelled 'Multi Recorder' and 'RW DVD Rewritable' The drive can read CDs and DVDs OK but
-
When I open mozilla firefox, an extra tab appears that says ant upgrade download successful. I had set that do not accept upgrades. It upgraded and I cannot eliminate the tab from appearing on my homepage. I always have problems when I take a Mozilla
-
General java programming question.
i have trouble knowing when something is referred to in contrast to something being copied. in this case, the array has changed, but not the character. public class ReturnArray2 public static int[] getArray() int a[] = new int[3];
-
OS 4 disaster, how do you roll back to 3.13 (or whichever was the previous
Hi all, first time poster. First of all with previous OS's not a problem, however this one is possibly not even worthy of OS 0.4 never mind 4. I've been following everyones guide on how ot cope with the poor battery life (which likes to drain complet
-
Feature Request! Hellooo Apple!
I was talking shop with a bunch of my video editor friends the other day and we were discussing a way to tap into a fibre-channel switch. Clearly a PCMCIA FC solution just wouldn't work. However if you did an AV or a PRO laptop in the next year with.