Start up disk full

I keep getting a message that my start up disk is full. I have been deleting from my audio and movies but can't figure out what constitutes as "Other". Help?

For information about the Other category in the Storage display, see this support article. If the display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
          iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install the app in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C.
For ODS:
security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-
For GP:
security execute-with-privileges /A*/GrandPerspective.app/*/M*/* 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password.
The application window will open behind other open windows. When you scan a volume, the window will eventually show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Similar Messages

  • HT4847 On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

    On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

    A MacBook will use Time Machine to make local backups so that when connected to an external drive it will backup a lot faster.
    to disable this, you must use a command under terminal.
    to locate terminal, do a search for it under spotlight (the magnifying glass on the top right corner), should be the first hit.
    once under terminal, type the following text exactly:
    sudo tmutil disablelocal
    hit enter.
    you will be asked to input your password, if you do not have a password, you will have to create one before performing this command. after entering your password, hit enter again and close terminal.
    in a few minutes the space taken up by time machine should be cleared.

  • Upon start up I get a start up disk full message and to delete files, now I only get a a blue screen on start up. How to I get past the blue screen and how do I delete files?

    Upon start up I get a "start up disk full message, delete files". Now on startup I only get a blue screen. How do I get past the blue screen and how do I delete files.

    That;s really not enough free space... you can use a tools such as OmniDiskSweeper to find out where your large files reside and begin pruning (or copying to an external if they're files that you want to keep).
    One thing is certain - if you're going to continue your current usage you're certainly going to need to install a larger boot drive.
    Clinton

  • Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

    Imac frozen at blue screen after i went into disk utilities and cleaned  free space.
    I tried holding down T key as it reboots
    and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
    to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
    please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
    Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
    Thanks

    i tried all this thanks
    i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
    no matter what you tell me
    Am i right ok in thinking that
    when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
    i came back and there was no progress bar just the box so i quit the program and when i opened  mac mail the system just froze  i forced quit mail rebooted and blue screen death
    Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
    basicly is my hard drive full of 00000  is this why im getting this message  because the process was interupted
    I need to know if i need outside help i bought the computer on line on  amazon uk  what dose one do next

  • Start up Disk full and MacBook Pro won't reboot.  Only white screen but can sleep, restart, shut down.

    Start up Disk full and MacBook Pro won't reboot.  Only white screen but can sleep, restart, shut down.

    Reboot into Safe Mode (hold the shift key down at the sound of the chime, release when the progress bar appears) Safe Mode will take longer to boot than normal.

  • Start Up Disk Full Error

    I continue to get a "Start up disk full" message when I try to use iPhoto or iMovie. It then tells me to delete items, but it does not tell me how to do this.
    Can some one walk me through it?
    Thanks

    Mark,
    Evidently, you have filled your hard drive completely. You must get rid of some files. Make some determination as to what you can safely delete, then begin placing files in your trash, and emptying it.
    You mention iMovie. DV footage, imported into iMovie, requires about 20 GBs of disk space per hour of footage. This could be the biggest consumer of your disk space. Placing an iMovie project file in the trash, then emptying it, might go a long way toward freeing up some space for you.
    If you can't find anything that can be safely deleted, you're going to have to purchase an external hard drive, copy some file to it, then delete them from your internal hard drive. In fact, I recommend you purchase an external drive regardless. You can use it to make backups of your important data, as well as using it to free up disk space.
    Scott

  • In cleaning up files based on a start up disk full message, i placed my music in a place where I tunes can't find it to play. any suggestion?

    In cleaning up files based on a start up disk full message, i placed my music in a place where I tunes can't find it to play. any suggestion?

    Provided that you moved the ENTIRE itunes folder...
    Quit iTunes from under the iTunes menu (by the apple), or hold CMD and press Q.  Then, hold Option on your keyboard and click the itunes icon on your dock.  Continue to hold Option and you'll see a popup where you can select "Choose Library".  Navigate to, and select, the itunes folder at its new location.
    If you didn't move the entire itunes library folder, you'll have to be specific about what you did.

  • Capacity available but still getting start up disk full message

    Hi
    I got the start up disk full message a few days ago. I did command i and ran Omnisweeper and deleted all the large files. I now have over 50% available capacity but my Mac is still running on slow and I still get the start up disk full message....and request to force quit.
    Any thoughts on what I can do. Run idefrag?
    Many thanks
    Claire

    We never asked for the serial number.  I've asked it be removed.  It is a link to your personal information which others can use to search about you.
    Remove McAfee.  It is only necessary if you run Windows.
    Early 2008 models were not Intel CoreDuos. They might a have been Core2Duo, but not CoreDuo.
    Your model if the serial number is correct, which I verified with:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    is indeed a Core2Duo Early 2008 model by serial number.
    Go to Apple menu -> About This Mac to verify you have a Core2Duo and not a CoreDuo, otherwise you are getting your serial number and processor information from two sources that got wrongly combined.
    An Early 2008 model can upgrade to Mavericks and Mountain Lion.   It can also install any version of Snow Leopard that is retail, and not system specific with a Mac model name on it.  So your issue with file space is likely due to something else you installed.     Not a virus per say, but probably something that eats up a lot of temporary space. I would run the machine overnight in screen saver, not energy saver model to ensure the logfiles get properly cleaned up.  I'd temporarily turn off any backup software.   And the next time you shut down, make sure not to leave any applications open, by checking command-tab that the Finder is the only open application before shutting down or restarting.

  • Start up disk full message/incomplete image

    I just upgraded to iDVD 6 and am trying to burn a DVD. First time it rendered/encoded/burned all night and then some. I got a messsage that start up disk was full and to delete files. It resulted with an incomplete DVD (Moives were on, slide shows not). I freed disk space - Project info shows 2.8 of 4.2GB for project and 35.78GB available. I even used an older theme, thinking that might help. It churned for 12 hours+, and I got the same result (start up disk full/incomplete DVD). I have to deliver 20 copies of this by Friday. HELP!

    don't know if this will help you at all but it helped me.. Using WhatSize - 10.3.9 at versiontracker allowed me to see where all my memory was going when I got that same disk full message. I have a new iMac and I didn't hink it was possible to be full up yet but a few of my undeleted iDVD slideshows were taking up gobs of memory... Make sure you empty the trash too... Once I made even more memory available I was able to burn again...
    http://www.versiontracker.com/dyn/moreinfo/macosx/21149
    iMac Intel   Mac OS X (10.4.6)  

  • Start up disk full--computer will not boot.

    Our Mac gives a "start up disk full" error message and freezes on the blue screen after the password login.    Resetting did no good, and entering safe mode only allows it go one step further but without any icons.   Unfortunately, we are traveling overseas and do not have a boot disk to use.    Is there a way to boot the computer, with a full start up disk, in order to resolve the issue without using a separate boot disk?

    If you have files on the drive you can delete then you can try this:
    Boot into single-user mode by holding down the COMMAND and S keys until the computer starts up to a black screen with white type. Once it stops scrolling you should see a prompt with the cursor. Enter the following:
    /sbin/fsck -fy
    Press RETURN. If you receive a message that says "***** FILE SYSTEM WAS MODIFIED *****" then re-run the command until you receive a message that says "** The volume (name_of_volume) appears to be OK."  If you re-run the command more than seven times and do not get the OK message, then the drive cannot be repaired this way. If you were successful then enter:
    /sbin/mount -uw /
    cd /Users/username
    Replace "username" with your admin account's username or shortname. Press RETURN after each command line.
    You may navigate into any one of your folders located in the Home folder which include:
    Desktop
    Documents
    Downloads
    Movies
    Music
    Pictures
    by using the 'cd' command. For example, to move into your Documents folder:
    cd Documents
    ls -al
    This moves you into the Documents folder then lists the contents of the folder. Press RETURN after each command line.
    To return to your Home folder enter:
    cd ..
    which moves you up one level in the hierarchy. To delete a file enter:
    rm -rf "filename"
    where "filename" is the name of the file you want to delete. For a whole folder it's the same command only use the folder's name instead of the file's name. The quotes are use for names that have spaces in them.
    If you are able to delete some large files this will free up space on your hard drive.
    To restart the computer normally enter:
    reboot
    Be careful to enter commands correctly because in single-user mode you can permanently screw things up if you aren't careful what commands you enter. I suggest you print this out so you will have everything at your fingertips for verification.
    Alternatively, find an Apple retailer and see if they will fix things for you, perhaps install a larger hard drive.

  • Got an error message that said "start up disk full". On reboot, only got a blue screen. Can move mouse around and shutdown but that is it. Firewired it to another mac and cleaned off about 2 gigs of space. Still on reboot only getting blue screen. ???

    Got an error message that said "start up disk full". On reboot, only got a blue screen. Can move mouse around and shutdown but that is it. Firewired it to another mac and cleaned off about 2 gigs of space. Still on reboot only getting blue screen. ???

    Startup in Safe Mode.
    http://support.apple.com/kb/PH11212?viewlocale=en_US

  • Why do I get a start-up disk full error message?  I have 800 GB and have used approx. 249.

    why do I get a start-up disk full error message?  I have 800 GB and have used approx. 249.

    Here's the appropriate answer:
    Last login: Fri May 23 13:19:44 on console
    [la-mes883094mn:~] joannhackett% diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *251.0 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         250.0 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Macintosh HD           *249.7 GB   disk1
    [la-mes883094mn:~] joannhackett% diskutil cs list
    CoreStorage logical volume groups (1 found)
    |
    +-- Logical Volume Group 098533C8-3936-4FB1-BCB8-2FE94E6E0500
        =========================================================
        Name:         Macintosh HD
        Status:       Online
        Size:         250006216704 B (250.0 GB)
        Free Space:   16777216 B (16.8 MB)
        |
        +-< Physical Volume 9518DA81-D7D6-4D76-8B4D-1F235D8AEA3A
        |   ----------------------------------------------------
        |   Index:    0
        |   Disk:     disk0s2
        |   Status:   Online
        |   Size:     250006216704 B (250.0 GB)
        |
        +-> Logical Volume Family C1A37CDE-6624-4094-A29A-2BB706380979
            Encryption Status:       Unlocked
            Encryption Type:         AES-XTS
            Conversion Status:       Complete
            Conversion Direction:    -none-
            Has Encrypted Extents:   Yes
            Fully Secure:            Yes
            Passphrase Required:     Yes
            |
            +-> Logical Volume 7175D310-4566-455D-9C50-1BD4CCF257CE
                Disk:                  disk1
                Status:                Online
                Size (Total):          249670668288 B (249.7 GB)
                Conversion Progress:   -none-
                Revertible:            Yes (unlock and decryption required)
                LV Name:               Macintosh HD
                Volume Name:           Macintosh HD
                Content Hint:          Apple_HFS
    [la-mes883094mn:~] joannhackett% mount
    /dev/disk1 on / (hfs, local, journaled)
    devfs on /dev (devfs, local, nobrowse)
    map -hosts on /net (autofs, nosuid, automounted, nobrowse)
    map auto_home on /home (autofs, automounted, nobrowse)
    map -fstab on /Network/Servers (autofs, automounted, nobrowse)
    localhost:/4OM-aHuM-mGML9PliXARLB on /Volumes/MobileBackups (mtmfs, nosuid, read-only, nobrowse)
    [la-mes883094mn:~] joannhackett% df -m /
    Filesystem 1M-blocks   Used Available Capacity  iused   ifree %iused  Mounted on
    /dev/disk1    238104 227599     10255    96% 58329357 2625394   96%   /
    [la-mes883094mn:~] joannhackett%
    As for the 251 disk, what is this?  I assume it's the wrong kind of memory?  Thanks, Jo Ann

  • Disk usage, safari freeze, start-up disk full

    What does it mean and what can I do when the disk usage is full, safari is not responding, and message says that start-up disk is full?

    Open the Info window for the startup volume ("Macintosh HD", unless you renamed it.) How much space is Available? Include the units (GB or MB.)

  • Start up disk full, computer won't turn on

    I have a 2008 Macbook pro, and earlier today it said "start up disk almost full", and did not want to let me download some pictures to the desktop. Now the computer will not turn on at all!
    It gets as far as the spinner and the apple logo and then the screen goes black and nothing happens. I tried safe book, single user mode, and even just taking the battery out and putting it back in, but nothing works.
    I do not know where my install disk is and I really don't want to lose my files, there is some irreplaceable stuff there.
    Is there ANYTHING I can try????? Do I have no choice but to try and find the installation disk? If I can't find that, what are my options?????

    It appears that you are left with two choices.  You can try Target Disk Mode:
    http://support.apple.com/kb/ht1661
    Or take out the HDD and install it in an enclosure and attach it to another Mac.
    That will allow you to transfer and/or delete files from the HDD.  Do not forget to empty trash.  Only then will free space be allocated.
    Ciao.

  • MBA start up disk full

    Hi! Im getting an error message on my macbook air that the start up disk is full, so i trashed some files and this morning when i turn it on it still says the same error message, and just freezes upon log in.. it only display a blank screen and wont let me do anything, even back my files up. I tried reboot it but still d same. Please help me. thanks.

    No I've never done that. In fact until this happened I didn't know that, for example, I could look at the iPhoto library on the iMac from the MBA. And it was both that switched. So, I would have made the same mistake on both the iMac and the MBA.
    But importantly, then, if I don't ever try to open the other machine iPhoto library, the iPhotos libraries should not switch?

Maybe you are looking for

  • Websites won't download properly

    many (or most) of the websites I visit , will not download properly.   Mainly Facebook, YOu Tube etc etc.     Any quick simple suggestion???  it is driving me CRAZY, the little wheel at the right side of my browser, just continues to spin CONSTANTLY,

  • I got 64 bit iTunes for 64 bit Windows 8

    I got 64 bit iTunes for 64 bit Windows 8 and I can't download my purchases on iTunes in the cloud and I had just recently restore my Windows 8 64 bit back to original settings and upgraded from Windows 8 to Windows 8.1 and I was thinking there has to

  • Array of buttons

    Hi everyone, I'm developing an app where I have a number of buttons, let's say 10. I named them button0, button1, ..., button9. Is there a way to cycle through all of them in a for loop? so instead of button0 setTitle:@"button 0" forState:UIControlSt

  • Drag and Drop in applet

    Hi, I have trawled through the archives and noticed that this topic has been raised a number of times, but seemingly without any solution. Using drag and drop in an Applet causes a deadlock during the drag if repaint() is called in dragOver(). I run

  • ORDERS05 IDOC to flat file - mapping question

    I have a requirement to convert an ORDERS05 IDOC to a "flat" structure for one of our vendors. When the IDOC has the following data, the mapping works well Input ===== ORDERS05    - E1EDP01       POSEX        00010       - E1EDPT1           -E1EDPT2