Start up drama
First attempt at forum,could not find thread relating so here goes!
Board in question K7TPro2-A(MS-6330).
Problem: When turned on at power point machine starts but Led display stays all red, that is 4 red. By turning on at power point and depressing computer power on button at a millisecond after power is on we get the Led's to do their thing and all go green. This is a two hand operation that does not work all the time and is frustrating, (don't ask how I time a millisecond).
To date I have pulled down machine swapped over connections @ JFP1 all seems to be in order. I am thinking it is a Bios / software start up setting.
Please suggest remidy software wise !!
Quote
Power supply AOpen model AXT-250T
If that model number means it is a 250W rated PSU, that could very well be the problem.
Please read the info printed on the PSU's label, and post those numbers here. Surely someone can state whether it is really capable of running your machine.
My guess is, it's either too weak, or about to give up.
Similar Messages
-
Hi to everybody,
i have a cisco aironet AP1231G-E-K9 and as you are expecting it does not work. The problem is that it has not installed it´s Cisco IOS, the status LED´s are red-green-red which means no ios image. We had it working propertly in a client´s placement and suddenly it stopped working. We don´t know what´s going on with it.
When we attemped to enter through console access it does not make any type of response, and the same when we try through ethernet conection. It seemed like it has dead ports. The fact is when i press during 20 seconds more less the mode button at startup, it try to obtain a new ios image from a tftp server, but as there is no alive port it can´t do that.
So, please anybody can help me??
Lots of thanks in advanceHi,
first of all thanks a lot for your quick response. Yes i configured my laptop ethernet port with the ip address 10.0.0.2/24 and it does not show up, that´s exactly my problem :).
When i turn on the AP, i can check that the amber and green leds of the ethernet port just switch on for a second and then they switch off for ever. Do you know what this mean?
And, i don´t know if that could help, but i write here the steps my AP make when it starts up:
- DRAM memory test (Green, -, Green)
- Board initialization test ( -, Amber, Red)
- Flash memory test ( -, Blinking Green, Blinking Green)
- Ethernet initialitation test (Amber, Green, -)
- Association with at least one wireless client device (¿?) ( -, Green, -)
- No Cisco IOS image file (Red, Green, Red)
Look that i am from Spain, and the green led seems so much to yellow, so i obtained a fantastic spanish Cisco AP
Lots of thanks, i appreciate so much your help
Raúl -
Mistery around Intel Fortran/C compilers and my Macbook
Hi all,
First post here. I do not want to write a long post here but I really need some enlightenment about a strange problem.
My Macbook came with Tiger and Xcode 2.4. Being a Fortran programmer, I installed Intel compilers without much hassle. Then Leopard arrived but I decided to not upgrade until receiving the green light from Intel (for months their compilers were broken for first-time Leopard users). A few months back most of issues seemed to be gone (I successfully installed the new compilers on 3 Mac Pros and 1 Intel iMac) and I was able to upgrade my Macbook to Leopard and the new compilers.
Here starts the drama : last week I had to upgrade my hard drive so I backup everything and did a clean Leopard install on a new and bigger HD (Hitachi 200Gb 7200rpm). Everything went fine except the fortran/C compilers. The error message I get is unique (try Google) :
ifort: error fatalerrorterminated: Fatal error in /opt/intel/fc/10.1.014/bin/ifortia32, terminated by segmentation violation
(I got similar message if I setup 64 bit compiler)
I can not compile anything. Even a simple hello.f. I even update to 10.5.4 but nothing changed. In fact, it was so frustrating that I decided to do another clean install of Tiger. Yes, I downgraded Mac OSX to 10.4, downloaded the old Fortran compiler (the one I had) and guess what ? I got the SAME message.
I triple checked my shell environment, looked over all libraries but nothing seems wrong. The ONLY thing that caught my attention was during the installation, when I selected to format the new disk using HFS+ journaled (non case sensitive). I do not believe that my old original drive had a case sensitive system but I did not checked it.
If you can help, it would be very much appreciated !Here is the crash log file I am getting :
Process: ifortia32 [441]
Path: /opt/intel/fc/10.1.007/bin/ifortia32
Identifier: ifortia32
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: ifortbin [440]
Date/Time: 2008-07-14 10:04:53.262 -0500
OS Version: Mac OS X 10.5 (9A581)
Report Version: 6
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x000000002820659e
Crashed Thread: 0
Thread 0 Crashed:
0 ifortia32 0x0006ccf4 lmaster_listlfp + 297
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x28206572 ebx: 0x00068cfe ecx: 0x282065a2 edx: 0x00000002
edi: 0x0080eed3 esi: 0x00000000 ebp: 0xbfffbfd8 esp: 0xbfffaf80
ss: 0x0000001f efl: 0x00010202 eip: 0x0006ccf4 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x2820659e
Binary Images:
0x1000 - 0x1ddfe2 +ifortia32 ??? (???) /opt/intel/fc/10.1.007/bin/ifortia32
0x266000 - 0x266ffd libmx.A.dylib ??? (???) /usr/lib/libmx.A.dylib
0x8fe00000 - 0x8fe2d883 dyld 95.3 (???) <81592e798780564b5d46b988f7ee1a6a> /usr/lib/dyld
0x90003000 - 0x90011ffd libz.1.dylib ??? (???) <5ddd8539ae2ebfd8e7cc1c57525385c7> /usr/lib/libz.1.dylib
0x90655000 - 0x9067ffef libauto.dylib ??? (???) <d468bc4a8a69343f1748c293db1b57fb> /usr/lib/libauto.dylib
0x906da000 - 0x906e1fe9 libgcc_s.1.dylib ??? (???) <f53c808e87d1184c0f9df63aef53ce0b> /usr/lib/libgcc_s.1.dylib
0x92edd000 - 0x92edefef libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x94211000 - 0x94349ff7 libicucore.A.dylib ??? (???) <afcea652ff2ec36885b2c81c57d06d4c> /usr/lib/libicucore.A.dylib
0x948f6000 - 0x9497ffff com.apple.framework.IOKit 1.5.0 (???) <5d9b85c55183f9732eb9efc38d18ba53> /System/Library/Frameworks/IOKit.framework/Versi
ons/A/IOKit
0x94e11000 - 0x94ef0fff libobjc.A.dylib ??? (???) <5eda47fec2d0e7853b3506aa1fd2dafa> /usr/lib/libobjc.A.dylib
0x95559000 - 0x956b3fe3 libSystem.B.dylib ??? (???) <8ecc83dc0399be3946f7a46e88cf4bbb> /usr/lib/libSystem.B.dylib
0x95f4b000 - 0x95fa8ffb libstdc++.6.dylib ??? (???) <04b812dcec670daa8b7d2852ab14be60> /usr/lib/libstdc++.6.dylib
0x966c2000 - 0x967f4fe7 com.apple.CoreFoundation 6.5 (476) <8bfebc0dbad6fc33bea0fa00a1b9ec37> /System/Library/Frameworks/CoreFoundation.framework
/Versions/A/CoreFoundation
0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib -
Cannot install windows, starting to get really pissed off with this PLEASE HELP
ok, i'm starting to get agitated with this.
i cannot install windows XP, 2003, OR Longhorn on my machine.
right now, i have the following setup:
msi 865pe neo2 motherboard
intel p4 3.2ghz w/HT (factory HS/Fan currently)
1 dimm of PC3200 crucial DDR400
30GB maxtor HD plugged into primary IDE
pioneer dvd/cd drive as sencondary IDE
alps 3.5" floppy drive
antec true blue 480wt PSU
i do the following:
format with maxtor cd
boot from OS cd
start setup, reboot, continue
the farthest i can get is 'registering components/completing installation' i either get a blue screen stop error which isnt the same everytime, or it just locks up and doesnt do anything.
ran the memtest checker and get errors on test #4
i had a DIMM of kingston that gave the same errors, so i RMA'd it and got another. same errors, so i RMA'd again and got a Crucial stick. same errors.
so i RMA'd the motherboard since i figured it had to be that. and it improved from the problems i had earlier. (the problems i had before were worse before.)
below are my BIOS settings. SOMEONE WHO KNOWS PLEASE HELP ME!
advanced bios features:
quick boot - enabled
boot order - floppy, cd, HDD
full logo - disabled
s.m.a.r.t - enabled
num-lock on boot - enabled
floppy swap - disabled
floppy seek - enabled
save rom to HD - no
boot to os/2 - no
hyper threading - disabled
mps revision - 1.4
apic acpi sci irq - disabled
cpu l1 & l2 cache - enabled
bios cacheable - disabled
c000, 32k shadow - disabled
advanced chipset:
dram timing...
configure by spd - enabled
(i dont know what to set timing to, nothing anyone has since said helps)
integrated perfs:
usb controller - enabled (same errors if its disabled too so its not USB)
usb device legacy support - disabled
on chip IDE:
operate mode - legacy mode
ata config - pata only
sata keep enabled - yes (for sata drive i have, error either way)
pata channel selection - both
onboard ethernet, 1394, prmoise ide and audio all DISABLED
pc healt status:
cpu - 49°C/120°F (idle sitting in bios)
system temp - 28°C/82ºF
cpu fan - 2678rpm
nb fan speed - 6490rpm
vcore - 1.456 up to 1.502
3.3v - 3.232v
+5.0v - 5.003v
+12v - 11.680v
-12v - -11.743v
-5.0v - -4.826v
battery - 2.896v
+5V SB - 4.945
freq/voltage control
Dynamic OC - disabled
cpu ratio locked
dram freq - auto
spread spectrum - enabled
cpu bus clock - 200
ddr clock (grayed out) - 400
adjust agp/pci - 66.66/33.33
cpu vcore adjust - no
cpu vcore (grayed out) - 1.5500v
ddr power voltage - 2.65v
agp power voltage - 1.50v
SOMEONE PLEASE HELP ME!!!!!
i'm running out of time, money, patience.
if it cant be solved i'm going to set myself on fire!Quote
Originally posted by REILLY875
Do NOT try the 250 Watt PSU!!, As "Wonk" said if you happen to Blow it, the PSU will most likely Take out the Mo-Bo with it! And maybe the CPU to, due to the Voltage Spike you would get ...I would not put to much Credence into the fact that as of now the +12V and the +3.3V Rails are reading a little low,(I say this because it is indeed a ANTEC), as this could be the Monitoring Hardware, or the Software that might be reading wrong....If I where you I would First set the Memory Timings Manually to 3-4-4-7-8, And up the DRAM (VDIMM) Voltage to 2.7 Volts, and if it still wont Load, I would Definitly try a different DIMM Slot, and Rince and Repeat .....If you dont mind me asking , Why are you running with just 1 Module?....Is it on purpose or are you saving up for More?................Sean REILLY875
yea, i dont plan to run the 250. im gonna wait for the new 480.
thanks for the info about ram timings as well. i havnt gotten any solid answers about what to set it to.
even with new mobo and ram, i'm getting errors in memtest86 #4 test as i always have. i've tried different slots with same problems.
i only have one module because i dont want to waste anymore money on a non-working system. once i get it up and running i'll add another 512. -
Unable to start gnome-session or gdm
Sorry for the vague title. I don't really have any specifics to go on for this problem.
When I try to start a gnome-session through startx, I get a screen that says, "Oh no! Something has gone wrong", with no error outputs in xsession-errors.
First off is some system info. I'm running a Thinkpad T540p:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d4)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM87 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK208M [GeForce GT 730M] (rev a1)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5227 (rev 01)
04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 83)
Here is my xorg.conf file:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:53 PDT 2013
Section "ServerLayout"
Identifier "layout"
Screen 0 "nvidia"
Inactive "intel"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration"
EndSection
Section "Screen"
Identifier "intel"
Device "intel"
EndSection
Here is my .xinitrc file:
xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --setprovideroutputsource 0x46 0x2b4
xrandr --output LVDS-0 --off
xrandr --auto
exec gnome-session
And the Xorg.0.log file:
[ 2483.841]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 2483.844] X Protocol Version 11, Revision 0
[ 2483.845] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 2483.846] Current Operating System: Linux slabity-laptop 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
[ 2483.846] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=acc69edd-1cf4-4c10-80de-e8a50d304800 rw quiet
[ 2483.848] Build Date: 13 December 2013 03:11:42PM
[ 2483.849]
[ 2483.850] Current version of pixman: 0.32.4
[ 2483.852] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2483.852] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2483.856] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 28 19:04:26 2013
[ 2483.857] (==) Using config file: "/etc/X11/xorg.conf"
[ 2483.858] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2483.858] (==) ServerLayout "layout"
[ 2483.858] (**) |-->Screen "nvidia" (0)
[ 2483.858] (**) | |-->Monitor "<default monitor>"
[ 2483.858] (**) | |-->Device "nvidia"
[ 2483.858] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 2483.858] (**) |-->Inactive Device "intel"
[ 2483.858] (**) |-->Input Device "Keyboard0"
[ 2483.858] (**) |-->Input Device "Mouse0"
[ 2483.858] (==) Automatically adding devices
[ 2483.858] (==) Automatically enabling devices
[ 2483.858] (==) Automatically adding GPU devices
[ 2483.858] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2483.858] Entry deleted from font path.
[ 2483.858] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2483.858] Entry deleted from font path.
[ 2483.858] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2483.858] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2483.858] Entry deleted from font path.
[ 2483.858] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2483.858] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 2483.858] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2483.858] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2483.858] (WW) Disabling Keyboard0
[ 2483.858] (WW) Disabling Mouse0
[ 2483.858] (II) Loader magic: 0x7fec20
[ 2483.858] (II) Module ABI versions:
[ 2483.858] X.Org ANSI C Emulation: 0.4
[ 2483.858] X.Org Video Driver: 14.1
[ 2483.858] X.Org XInput driver : 19.1
[ 2483.858] X.Org Server Extension : 7.0
[ 2483.858] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2483.858] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 2483.860] (--) PCI:*(0:0:2:0) 8086:0416:17aa:2211 rev 6, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 2483.860] (--) PCI: (0:1:0:0) 10de:1290:17aa:2211 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00004000/128
[ 2483.861] Initializing built-in extension Generic Event Extension
[ 2483.862] Initializing built-in extension SHAPE
[ 2483.863] Initializing built-in extension MIT-SHM
[ 2483.864] Initializing built-in extension XInputExtension
[ 2483.865] Initializing built-in extension XTEST
[ 2483.866] Initializing built-in extension BIG-REQUESTS
[ 2483.867] Initializing built-in extension SYNC
[ 2483.867] Initializing built-in extension XKEYBOARD
[ 2483.868] Initializing built-in extension XC-MISC
[ 2483.869] Initializing built-in extension SECURITY
[ 2483.870] Initializing built-in extension XINERAMA
[ 2483.871] Initializing built-in extension XFIXES
[ 2483.872] Initializing built-in extension RENDER
[ 2483.873] Initializing built-in extension RANDR
[ 2483.874] Initializing built-in extension COMPOSITE
[ 2483.874] Initializing built-in extension DAMAGE
[ 2483.875] Initializing built-in extension MIT-SCREEN-SAVER
[ 2483.876] Initializing built-in extension DOUBLE-BUFFER
[ 2483.877] Initializing built-in extension RECORD
[ 2483.878] Initializing built-in extension DPMS
[ 2483.879] Initializing built-in extension X-Resource
[ 2483.879] Initializing built-in extension XVideo
[ 2483.880] Initializing built-in extension XVideo-MotionCompensation
[ 2483.881] Initializing built-in extension XFree86-VidModeExtension
[ 2483.882] Initializing built-in extension XFree86-DGA
[ 2483.883] Initializing built-in extension XFree86-DRI
[ 2483.884] Initializing built-in extension DRI2
[ 2483.884] (II) LoadModule: "glx"
[ 2483.884] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2483.892] (II) Module glx: vendor="NVIDIA Corporation"
[ 2483.892] compiled for 4.0.2, module version = 1.0.0
[ 2483.892] Module class: X.Org Server Extension
[ 2483.892] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 2483.892] Loading extension GLX
[ 2483.892] (II) LoadModule: "nvidia"
[ 2483.892] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2483.893] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2483.893] compiled for 4.0.2, module version = 1.0.0
[ 2483.893] Module class: X.Org Video Driver
[ 2483.893] (II) LoadModule: "modesetting"
[ 2483.893] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2483.893] (II) Module modesetting: vendor="X.Org Foundation"
[ 2483.893] compiled for 1.14.4, module version = 0.8.1
[ 2483.893] Module class: X.Org Video Driver
[ 2483.893] ABI class: X.Org Video Driver, version 14.1
[ 2483.893] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 2483.893] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2483.893] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2483.893] (++) using VT number 1
[ 2483.893] (II) Loading sub module "fb"
[ 2483.893] (II) LoadModule: "fb"
[ 2483.893] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2483.893] (II) Module fb: vendor="X.Org Foundation"
[ 2483.893] compiled for 1.14.5, module version = 1.0.0
[ 2483.893] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2483.893] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 2483.893] (II) Loading sub module "wfb"
[ 2483.893] (II) LoadModule: "wfb"
[ 2483.893] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2483.893] (II) Module wfb: vendor="X.Org Foundation"
[ 2483.893] compiled for 1.14.5, module version = 1.0.0
[ 2483.893] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2483.893] (II) Loading sub module "ramdac"
[ 2483.893] (II) LoadModule: "ramdac"
[ 2483.893] (II) Module "ramdac" already built-in
[ 2483.893] (II) modesetting(1): using drv /dev/dri/card1
[ 2483.893] (II) modesetting(G0): using drv /dev/dri/card1
[ 2483.893] (EE) Screen 1 deleted because of no matching config section.
[ 2483.893] (II) UnloadModule: "modesetting"
[ 2483.894] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 2483.894] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 2483.894] (==) NVIDIA(0): RGB weight 888
[ 2483.894] (==) NVIDIA(0): Default visual is TrueColor
[ 2483.894] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2483.894] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 2483.894] (**) NVIDIA(0): Enabling 2D acceleration
[ 2484.064] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 2484.065] (II) NVIDIA(0): NVIDIA GPU GeForce GT 730M (GK208) at PCI:1:0:0 (GPU-0)
[ 2484.065] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 2484.065] (--) NVIDIA(0): VideoBIOS: 80.28.2a.00.30
[ 2484.065] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[ 2484.065] (--) NVIDIA(0): Valid display device(s) on GeForce GT 730M at PCI:1:0:0
[ 2484.065] (--) NVIDIA(0): none
[ 2484.065] (II) NVIDIA(0): Validated MetaModes:
[ 2484.065] (II) NVIDIA(0): "NULL"
[ 2484.065] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 2484.065] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 2484.065] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 2484.065] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 2484.065] (==) modesetting(G0): RGB weight 888
[ 2484.065] (==) modesetting(G0): Default visual is TrueColor
[ 2484.065] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 2484.065] (II) modesetting(G0): Output eDP-1-0 has no monitor section
[ 2484.067] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 2484.067] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
[ 2484.093] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
[ 2484.093] (II) modesetting(G0): Output DisplayPort-1-1 has no monitor section
[ 2484.093] (II) modesetting(G0): Output HDMI-1-1 has no monitor section
[ 2484.093] (II) modesetting(G0): EDID for output eDP-1-0
[ 2484.093] (II) modesetting(G0): Manufacturer: MEI Model: 96a2 Serial#: 0
[ 2484.093] (II) modesetting(G0): Year: 2013 Week: 255
[ 2484.093] (II) modesetting(G0): EDID Version: 1.4
[ 2484.093] (II) modesetting(G0): Digital Display Input
[ 2484.093] (II) modesetting(G0): 8 bits per channel
[ 2484.093] (II) modesetting(G0): Digital interface is DisplayPort
[ 2484.093] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 2484.093] (II) modesetting(G0): Gamma: 2.20
[ 2484.093] (II) modesetting(G0): No DPMS capabilities specified
[ 2484.093] (II) modesetting(G0): Supported color encodings: RGB 4:4:4
[ 2484.093] (II) modesetting(G0): First detailed timing is preferred mode
[ 2484.093] (II) modesetting(G0): Preferred mode is native pixel format and refresh rate
[ 2484.093] (II) modesetting(G0): redX: 0.652 redY: 0.329 greenX: 0.324 greenY: 0.600
[ 2484.093] (II) modesetting(G0): blueX: 0.150 blueY: 0.045 whiteX: 0.312 whiteY: 0.329
[ 2484.093] (II) modesetting(G0): Manufacturer's mask: 0
[ 2484.093] (II) modesetting(G0): Supported detailed timing:
[ 2484.093] (II) modesetting(G0): clock: 302.5 MHz Image Size: 344 x 193 mm
[ 2484.093] (II) modesetting(G0): h_active: 2880 h_sync: 2924 h_sync_end 2928 h_blank_end 3076 h_border: 0
[ 2484.093] (II) modesetting(G0): v_active: 1620 v_sync: 1629 v_sync_end 1630 v_blanking: 1640 v_border: 0
[ 2484.093] (II) modesetting(G0): Supported detailed timing:
[ 2484.093] (II) modesetting(G0): clock: 302.5 MHz Image Size: 344 x 193 mm
[ 2484.093] (II) modesetting(G0): h_active: 2880 h_sync: 2924 h_sync_end 2928 h_blank_end 3076 h_border: 0
[ 2484.093] (II) modesetting(G0): v_active: 1620 v_sync: 1629 v_sync_end 1630 v_blanking: 1967 v_border: 0
[ 2484.093] (II) modesetting(G0): Ranges: V min: 49 V max: 61 Hz, H min: 96 H max: 100 kHz, PixClock max 305 MHz
[ 2484.093] (II) modesetting(G0): VVX16T028J00
[ 2484.093] (II) modesetting(G0): EDID (in hex):
[ 2484.093] (II) modesetting(G0): 00ffffffffffff0034a9a29600000000
[ 2484.093] (II) modesetting(G0): ff170104a52213780212a1a754539926
[ 2484.093] (II) modesetting(G0): 0b505400000001010101010101010101
[ 2484.093] (II) modesetting(G0): 0101010101012a7640c4b05414602c04
[ 2484.093] (II) modesetting(G0): 910058c11000001e2a7640c4b0545b61
[ 2484.093] (II) modesetting(G0): 2c04910058c11000001e000000fd0031
[ 2484.093] (II) modesetting(G0): 3d60641e010a202020202020000000fe
[ 2484.093] (II) modesetting(G0): 005656583136543032384a30300a0050
[ 2484.093] (II) modesetting(G0): Printing probed modes for output eDP-1-0
[ 2484.093] (II) modesetting(G0): Modeline "2880x1620"x60.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[ 2484.093] (II) modesetting(G0): Modeline "2880x1620"x50.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[ 2484.093] (II) modesetting(G0): Modeline "2048x1536"x60.0 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[ 2484.093] (II) modesetting(G0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[ 2484.093] (II) modesetting(G0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[ 2484.093] (II) modesetting(G0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[ 2484.093] (II) modesetting(G0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 2484.095] (II) modesetting(G0): EDID for output VGA-1-0
[ 2484.095] (II) modesetting(G0): EDID for output DisplayPort-1-0
[ 2484.119] (II) modesetting(G0): EDID for output HDMI-1-0
[ 2484.119] (II) modesetting(G0): EDID for output DisplayPort-1-1
[ 2484.120] (II) modesetting(G0): EDID for output HDMI-1-1
[ 2484.120] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2484.120] (==) modesetting(G0): DPI set to (96, 96)
[ 2484.120] (II) Loading sub module "fb"
[ 2484.120] (II) LoadModule: "fb"
[ 2484.120] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2484.120] (II) Module fb: vendor="X.Org Foundation"
[ 2484.120] compiled for 1.14.5, module version = 1.0.0
[ 2484.120] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2484.120] (II) Loading sub module "shadow"
[ 2484.120] (II) LoadModule: "shadow"
[ 2484.120] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 2484.120] (II) Module shadow: vendor="X.Org Foundation"
[ 2484.120] compiled for 1.14.5, module version = 1.1.0
[ 2484.120] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2484.120] (--) Depth 24 pixmap format is 32 bpp
[ 2484.120] (==) modesetting(G0): Backing store disabled
[ 2484.120] (==) modesetting(G0): Silken mouse enabled
[ 2484.120] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2484.121] (==) modesetting(G0): DPMS enabled
[ 2484.121] (WW) modesetting(G0): Option "AllowEmptyInitialConfiguration" is not used
[ 2485.183] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 2485.183] (II) NVIDIA: access.
[ 2485.187] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 2485.187] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2485.187] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 2485.187] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 2485.187] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 2485.187] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2485.187] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 2485.187] (II) NVIDIA(0): Config Options in the README.
[ 2485.187] (II) NVIDIA(0): Setting mode "NULL"
[ 2485.187] (EE) NVIDIA(0): Failed to initiate mode change.
[ 2485.187] (EE) NVIDIA(0): Failed to complete mode change
[ 2485.196] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 2485.196] Loading extension NV-GLX
[ 2485.201] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2485.201] (==) NVIDIA(0): Backing store disabled
[ 2485.201] (==) NVIDIA(0): Silken mouse enabled
[ 2485.201] (==) NVIDIA(0): DPMS enabled
[ 2485.201] Loading extension NV-CONTROL
[ 2485.201] (II) Loading sub module "dri2"
[ 2485.201] (II) LoadModule: "dri2"
[ 2485.201] (II) Module "dri2" already built-in
[ 2485.201] (II) NVIDIA(0): [DRI2] Setup complete
[ 2485.201] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2485.201] (--) RandR disabled
[ 2485.204] (II) Initializing extension GLX
[ 2485.205] (II) modesetting(G0): Damage tracking initialized
[ 2485.227] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2485.227] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2485.227] (II) LoadModule: "evdev"
[ 2485.227] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2485.227] (II) Module evdev: vendor="X.Org Foundation"
[ 2485.227] compiled for 1.14.3, module version = 2.8.2
[ 2485.227] Module class: X.Org XInput Driver
[ 2485.228] ABI class: X.Org XInput driver, version 19.1
[ 2485.228] (II) Using input driver 'evdev' for 'Power Button'
[ 2485.228] (**) Power Button: always reports core events
[ 2485.228] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2485.228] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2485.228] (--) evdev: Power Button: Found keys
[ 2485.228] (II) evdev: Power Button: Configuring as keyboard
[ 2485.228] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[ 2485.228] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2485.228] (**) Option "xkb_rules" "evdev"
[ 2485.228] (**) Option "xkb_model" "pc104"
[ 2485.228] (**) Option "xkb_layout" "us"
[ 2485.240] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 2485.240] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2485.240] (II) Using input driver 'evdev' for 'Video Bus'
[ 2485.240] (**) Video Bus: always reports core events
[ 2485.240] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 2485.240] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2485.240] (--) evdev: Video Bus: Found keys
[ 2485.240] (II) evdev: Video Bus: Configuring as keyboard
[ 2485.240] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event10"
[ 2485.240] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 2485.240] (**) Option "xkb_rules" "evdev"
[ 2485.240] (**) Option "xkb_model" "pc104"
[ 2485.241] (**) Option "xkb_layout" "us"
[ 2485.241] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 2485.241] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2485.241] (II) Using input driver 'evdev' for 'Video Bus'
[ 2485.241] (**) Video Bus: always reports core events
[ 2485.241] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 2485.241] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2485.241] (--) evdev: Video Bus: Found keys
[ 2485.241] (II) evdev: Video Bus: Configuring as keyboard
[ 2485.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input13/event11"
[ 2485.241] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 2485.241] (**) Option "xkb_rules" "evdev"
[ 2485.241] (**) Option "xkb_model" "pc104"
[ 2485.241] (**) Option "xkb_layout" "us"
[ 2485.241] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2485.241] (II) No input driver specified, ignoring this device.
[ 2485.241] (II) This device may have been added with another device file.
[ 2485.241] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 2485.241] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 2485.241] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event14)
[ 2485.241] (II) No input driver specified, ignoring this device.
[ 2485.241] (II) This device may have been added with another device file.
[ 2485.241] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event13)
[ 2485.241] (II) No input driver specified, ignoring this device.
[ 2485.241] (II) This device may have been added with another device file.
[ 2485.241] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event12)
[ 2485.241] (II) No input driver specified, ignoring this device.
[ 2485.241] (II) This device may have been added with another device file.
[ 2485.242] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8)
[ 2485.242] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 2485.242] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 2485.242] (**) Integrated Camera: always reports core events
[ 2485.242] (**) evdev: Integrated Camera: Device: "/dev/input/event8"
[ 2485.242] (--) evdev: Integrated Camera: Vendor 0x4ca Product 0x7035
[ 2485.242] (--) evdev: Integrated Camera: Found keys
[ 2485.242] (II) evdev: Integrated Camera: Configuring as keyboard
[ 2485.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input10/event8"
[ 2485.242] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[ 2485.242] (**) Option "xkb_rules" "evdev"
[ 2485.242] (**) Option "xkb_model" "pc104"
[ 2485.242] (**) Option "xkb_layout" "us"
[ 2485.242] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 2485.242] (II) No input driver specified, ignoring this device.
[ 2485.242] (II) This device may have been added with another device file.
[ 2485.242] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 2485.242] (II) No input driver specified, ignoring this device.
[ 2485.242] (II) This device may have been added with another device file.
[ 2485.242] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
[ 2485.242] (II) No input driver specified, ignoring this device.
[ 2485.242] (II) This device may have been added with another device file.
[ 2485.242] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2485.242] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2485.242] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2485.242] (**) AT Translated Set 2 keyboard: always reports core events
[ 2485.242] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2485.242] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2485.242] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2485.242] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2485.242] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2485.242] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 2485.242] (**) Option "xkb_rules" "evdev"
[ 2485.242] (**) Option "xkb_model" "pc104"
[ 2485.242] (**) Option "xkb_layout" "us"
[ 2485.242] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 2485.242] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 2485.242] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 2485.242] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 2485.242] (II) LoadModule: "synaptics"
[ 2485.242] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2485.242] (II) Module synaptics: vendor="X.Org Foundation"
[ 2485.242] compiled for 1.14.4, module version = 1.7.2
[ 2485.242] Module class: X.Org XInput Driver
[ 2485.242] ABI class: X.Org XInput driver, version 19.1
[ 2485.242] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2485.242] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2485.242] (**) Option "Device" "/dev/input/event9"
[ 2485.356] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5112 (res 42)
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 3834 (res 42)
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2485.356] (**) Option "TapButton1" "1"
[ 2485.356] (**) Option "TapButton2" "2"
[ 2485.356] (**) Option "TapButton3" "3"
[ 2485.356] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2485.356] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2485.383] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event9"
[ 2485.383] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 2485.383] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2485.383] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 2485.383] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.046
[ 2485.383] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2485.383] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2485.383] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2485.383] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2485.383] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2485.383] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2485.383] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 2485.383] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[ 2485.383] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 2485.383] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 2485.383] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 2485.383] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
[ 2485.383] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 2485.383] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 2485.383] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 2485.383] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 2485.383] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 2485.383] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 2485.383] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2485.383] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input11/event15"
[ 2485.383] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 2485.383] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 2485.384] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 2485.384] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 2485.384] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 2485.384] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 2485.384] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 2485.384] (II) No input driver specified, ignoring this device.
[ 2485.384] (II) This device may have been added with another device file.
[ 2485.384] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2485.384] (II) No input driver specified, ignoring this device.
[ 2485.384] (II) This device may have been added with another device file.
[ 2485.384] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event3)
[ 2485.384] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 2485.384] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 2485.384] (**) ThinkPad Extra Buttons: always reports core events
[ 2485.384] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event3"
[ 2485.384] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 2485.384] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 2485.384] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 2485.384] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input4/event3"
[ 2485.384] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 2485.384] (**) Option "xkb_rules" "evdev"
[ 2485.384] (**) Option "xkb_model" "pc104"
[ 2485.384] (**) Option "xkb_layout" "us"
[ 2485.391] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[ 2485.391] (II) modesetting(G0): Using EDID range info for horizontal sync
[ 2485.391] (II) modesetting(G0): Using EDID range info for vertical refresh
[ 2485.391] (II) modesetting(G0): Printing DDC gathered Modelines:
[ 2485.391] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[ 2485.391] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[ 2485.420] reporting 3 6 26 203
[ 2485.421] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[ 2485.421] (II) modesetting(G0): Using hsync ranges from config file
[ 2485.421] (II) modesetting(G0): Using vrefresh ranges from config file
[ 2485.421] (II) modesetting(G0): Printing DDC gathered Modelines:
[ 2485.421] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[ 2485.421] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[ 2485.450] reporting 3 6 26 203
[ 2485.467] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[ 2485.467] (II) modesetting(G0): Using hsync ranges from config file
[ 2485.467] (II) modesetting(G0): Using vrefresh ranges from config file
[ 2485.467] (II) modesetting(G0): Printing DDC gathered Modelines:
[ 2485.467] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[ 2485.467] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[ 2485.493] reporting 3 6 26 203
[ 2485.510] have a master to look out for
[ 2485.510] adjust shatters 0 2880
[ 2485.515] need to create shared pixmap 1reporting 3 6 26 203
[ 2486.236] reporting 3 6 26 203
[ 2486.345] reporting 3 6 26 203
[ 2486.373] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[ 2486.373] (II) modesetting(G0): Using hsync ranges from config file
[ 2486.373] (II) modesetting(G0): Using vrefresh ranges from config file
[ 2486.373] (II) modesetting(G0): Printing DDC gathered Modelines:
[ 2486.373] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[ 2486.373] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[ 2486.400] reporting 3 6 26 203
[ 2486.463] reporting 3 6 26 203
[ 2486.483] reporting 3 6 26 203
[ 2486.605] reporting 3 6 26 203
[ 2486.636] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[ 2486.636] (II) modesetting(G0): Using hsync ranges from config file
[ 2486.636] (II) modesetting(G0): Using vrefresh ranges from config file
[ 2486.636] (II) modesetting(G0): Printing DDC gathered Modelines:
[ 2486.636] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[ 2486.636] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[ 2486.663] reporting 3 6 26 203
[ 2486.724] reporting 3 6 26 203
[ 2486.840] reporting 3 6 26 203
[ 2486.844] reporting 3 6 26 203
[ 2486.868] reporting 3 6 26 203
[ 2493.841] (II) evdev: ThinkPad Extra Buttons: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.841] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.841] (II) UnloadModule: "synaptics"
[ 2493.841] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.841] (II) evdev: Integrated Camera: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.841] (II) evdev: Video Bus: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.841] (II) evdev: Video Bus: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.841] (II) evdev: Power Button: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.863] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 2494.409] (EE) Server terminated successfully (0). Closing log file.
I'm pretty lost now. I finally managed to get X working on my Nvidia/Intel combination with twm, but it refuses to work with gnome-session.
Any ideas?Same problem for me too!
After kernel update on restarting GDM try to start but fails. I've last nvidia-173xx driver installed.
I've solved the problem forcing nvdia driver reinstallation. This is my Xserver log! -
Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36I started up and plugged in my iPad and then the following message came up:
iTunes
❗️This iPad cannot be used because the required software is not
Installed. Run the iTunes installer to remove iTunes, then install
the 64-bit version of iTunes.
OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
failed to start. Verify that you have sufficient
Privileges to start system services.
Abort. Retry. Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
Your computer. Try reinstalling the program to fix the problem.
OK
Press OK and then the next message:
iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
OK
Any suggestions? -
Black screen instead of TTYs after Xorg once started and leaved
Hi,
I've installed Arch on my laptop and experience following issue... I log in after boot and run "startx", then openbox starts properly. This is fine, but when I leave X, I can't see anything (TTY expected). I can switch to another TTY, login as root and type "reboot" or type "killall X", then log in as regular user and type "startx" to get openbox again. So there are TTYs obviously but I can't see anything but black screen.
By leaving X (above) I mean...
- typing "sudo killal X" in xterm
- using openbox "Log Out" menu option
- switching to another TTY by hitting Alt+Fn
All of these lead to the same issue.
I assume it's not Xorg problem, but I may be wrong of course. Is that driver related? I have Nvidia card and use proprietary drivers installed via pacman. Can anybody give me an advice where to look? Thanks a lot. I also attach (maybe relevant) outputs. If there is anything else needed to know please tell me and I'll post it.
$ lspci
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation Device 075e (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:09.0 SATA controller: nVidia Corporation Device 0ad5 (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:13.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:14.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:15.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h [Turion X2, Athlon X2, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Link Control
02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 9100M G] (rev a2)
03:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1)
06:00.0 Network controller: RaLink RT2860
07:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller
07:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
07:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
07:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
$ pacman -Qs nvidia
local/libvdpau 0.4-1
Nvidia VDPAU library
local/nvidia 256.35-1
NVIDIA drivers for kernel26.
local/nvidia-utils 256.35-4
NVIDIA drivers utilities and libraries.
$ cat /var/log/Xorg.0.log.old
[ 156.095]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 156.097]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 156.098] X Protocol Version 11, Revision 0
[ 156.098] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 156.098] Current Operating System: Linux DrZoidberg 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 00:07:49 CEST 2010 x86_64
[ 156.098] Kernel command line: root=/dev/sda5 ro
[ 156.098] Build Date: 21 June 2010 12:01:49PM
[ 156.099]
[ 156.099] Current version of pixman: 0.18.2
[ 156.099] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 156.099] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 156.101] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 4 15:57:39 2010
[ 156.101] (==) Using config file: "/etc/X11/xorg.conf"
[ 156.101] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 156.102] (==) ServerLayout "Layout0"
[ 156.102] (**) |-->Screen "Screen0" (0)
[ 156.102] (**) | |-->Monitor "Monitor0"
[ 156.102] (**) | |-->Device "Device0"
[ 156.102] (**) |-->Input Device "Keyboard0"
[ 156.102] (**) |-->Input Device "Mouse0"
[ 156.102] (==) Automatically adding devices
[ 156.102] (==) Automatically enabling devices
[ 156.102] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 156.102] Entry deleted from font path.
[ 156.102] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 156.102] Entry deleted from font path.
[ 156.102] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 156.102] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 156.102] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 156.102] (WW) Disabling Keyboard0
[ 156.102] (WW) Disabling Mouse0
[ 156.102] (II) Loader magic: 0x7ce880
[ 156.102] (II) Module ABI versions:
[ 156.102] X.Org ANSI C Emulation: 0.4
[ 156.102] X.Org Video Driver: 7.0
[ 156.102] X.Org XInput driver : 9.0
[ 156.102] X.Org Server Extension : 3.0
[ 156.110] (--) PCI: (0:0:1:3) 10de:0753:1462:6710 nVidia Corporation MCP78S [GeForce 8200] Co-Processor rev 162, Mem @ 0xf8e80000/524288
[ 156.110] (--) PCI:*(0:2:0:0) 10de:0844:1462:6710 nVidia Corporation C77 [GeForce 9100M G] rev 162, Mem @ 0xf9000000/16777216, 0xc8000000/134217728, 0xc6000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072
[ 156.110] (--) PCI: (0:3:0:0) 10de:06e9:1462:6710 nVidia Corporation G98 [GeForce 9300M GS] rev 161, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[ 156.110] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 156.110] (II) LoadModule: "extmod"
[ 156.110] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 156.111] (II) Module extmod: vendor="X.Org Foundation"
[ 156.111] compiled for 1.8.1.902, module version = 1.0.0
[ 156.111] Module class: X.Org Server Extension
[ 156.111] ABI class: X.Org Server Extension, version 3.0
[ 156.111] (II) Loading extension MIT-SCREEN-SAVER
[ 156.111] (II) Loading extension XFree86-VidModeExtension
[ 156.111] (II) Loading extension XFree86-DGA
[ 156.111] (II) Loading extension DPMS
[ 156.111] (II) Loading extension XVideo
[ 156.111] (II) Loading extension XVideo-MotionCompensation
[ 156.111] (II) Loading extension X-Resource
[ 156.111] (II) LoadModule: "dbe"
[ 156.111] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 156.111] (II) Module dbe: vendor="X.Org Foundation"
[ 156.111] compiled for 1.8.1.902, module version = 1.0.0
[ 156.111] Module class: X.Org Server Extension
[ 156.111] ABI class: X.Org Server Extension, version 3.0
[ 156.111] (II) Loading extension DOUBLE-BUFFER
[ 156.111] (II) LoadModule: "glx"
[ 156.111] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 156.127] (II) Module glx: vendor="NVIDIA Corporation"
[ 156.128] compiled for 4.0.2, module version = 1.0.0
[ 156.128] Module class: X.Org Server Extension
[ 156.128] (II) NVIDIA GLX Module 256.35 Wed Jun 16 19:10:31 PDT 2010
[ 156.128] (II) Loading extension GLX
[ 156.128] (II) LoadModule: "record"
[ 156.128] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 156.128] (II) Module record: vendor="X.Org Foundation"
[ 156.128] compiled for 1.8.1.902, module version = 1.13.0
[ 156.128] Module class: X.Org Server Extension
[ 156.128] ABI class: X.Org Server Extension, version 3.0
[ 156.128] (II) Loading extension RECORD
[ 156.128] (II) LoadModule: "dri"
[ 156.128] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 156.129] (II) Module dri: vendor="X.Org Foundation"
[ 156.129] compiled for 1.8.1.902, module version = 1.0.0
[ 156.129] ABI class: X.Org Server Extension, version 3.0
[ 156.129] (II) Loading extension XFree86-DRI
[ 156.129] (II) LoadModule: "dri2"
[ 156.129] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 156.129] (II) Module dri2: vendor="X.Org Foundation"
[ 156.129] compiled for 1.8.1.902, module version = 1.2.0
[ 156.129] ABI class: X.Org Server Extension, version 3.0
[ 156.129] (II) Loading extension DRI2
[ 156.129] (II) LoadModule: "nvidia"
[ 156.129] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 156.130] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 156.130] compiled for 4.0.2, module version = 1.0.0
[ 156.130] Module class: X.Org Video Driver
[ 156.130] (II) NVIDIA dlloader X Driver 256.35 Wed Jun 16 18:45:02 PDT 2010
[ 156.130] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 156.130] (--) using VT number 7
[ 156.134] (II) Primary Device is: PCI 02@00:00:0
[ 156.134] (II) Loading sub module "fb"
[ 156.134] (II) LoadModule: "fb"
[ 156.134] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 156.134] (II) Module fb: vendor="X.Org Foundation"
[ 156.134] compiled for 1.8.1.902, module version = 1.0.0
[ 156.134] ABI class: X.Org ANSI C Emulation, version 0.4
[ 156.134] (II) Loading sub module "wfb"
[ 156.134] (II) LoadModule: "wfb"
[ 156.135] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 156.135] (II) Module wfb: vendor="X.Org Foundation"
[ 156.135] compiled for 1.8.1.902, module version = 1.0.0
[ 156.135] ABI class: X.Org ANSI C Emulation, version 0.4
[ 156.135] (II) Loading sub module "ramdac"
[ 156.135] (II) LoadModule: "ramdac"
[ 156.135] (II) Module "ramdac" already built-in
[ 156.135] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 156.135] (==) NVIDIA(0): RGB weight 888
[ 156.135] (==) NVIDIA(0): Default visual is TrueColor
[ 156.135] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 156.135] (**) NVIDIA(0): Option "NoLogo" "true"
[ 156.135] (**) NVIDIA(0): Enabling RENDER acceleration
[ 156.135] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 156.135] (II) NVIDIA(0): enabled.
[ 156.360] (II) NVIDIA(0): NVIDIA GPU GeForce 9100M G (C77) at PCI:2:0:0 (GPU-0)
[ 156.360] (--) NVIDIA(0): Memory: 524288 kBytes
[ 156.360] (--) NVIDIA(0): VideoBIOS: 62.77.2c.00.00
[ 156.360] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 156.360] (--) NVIDIA(0): Connected display device(s) on GeForce 9100M G at PCI:2:0:0:
[ 156.360] (--) NVIDIA(0): Seiko/Epson (DFP-0)
[ 156.360] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 156.360] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[ 156.373] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 156.373] (==) NVIDIA(0):
[ 156.373] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 156.373] (==) NVIDIA(0): will be used as the requested mode.
[ 156.373] (==) NVIDIA(0):
[ 156.374] (II) NVIDIA(0): Validated modes:
[ 156.374] (II) NVIDIA(0): "nvidia-auto-select"
[ 156.374] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 156.376] (--) NVIDIA(0): DPI set to (99, 97); computed from "UseEdidDpi" X config
[ 156.376] (--) NVIDIA(0): option
[ 156.376] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 156.376] (--) Depth 24 pixmap format is 32 bpp
[ 156.376] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 156.865] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce 9300M GS (G98) at PCI:3:0:0 (GPU-1)
[ 156.865] (--) NVIDIA(GPU-1): Memory: 524288 kBytes
[ 156.865] (--) NVIDIA(GPU-1): VideoBIOS: 62.98.3c.00.00
[ 156.865] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[ 156.865] (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU
[ 156.865] (--) NVIDIA(GPU-1): Connected display device(s) on GeForce 9300M GS at PCI:3:0:0:
[ 156.865] (--) NVIDIA(GPU-1): none
[ 156.866] (II) NVIDIA(0): Initialized GPU GART.
[ 156.878] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 156.878] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 156.878] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 156.878] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 156.878] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 156.878] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 156.878] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 156.878] (II) NVIDIA(0): Config Options in the README.
[ 156.879] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
[ 156.879] (II) NVIDIA(0): enough to receive ACPI hotkey events.
[ 156.879] (II) NVIDIA(0): ACPI brightness change hotkey events enabled.
[ 156.880] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 157.172] (II) Loading extension NV-GLX
[ 157.208] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 157.216] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 157.216] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 157.216] (==) NVIDIA(0): Backing store disabled
[ 157.216] (==) NVIDIA(0): Silken mouse enabled
[ 157.232] (**) NVIDIA(0): DPMS enabled
[ 157.232] (II) Loading extension NV-CONTROL
[ 157.233] (II) Loading extension XINERAMA
[ 157.233] (II) Loading sub module "dri2"
[ 157.233] (II) LoadModule: "dri2"
[ 157.233] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 157.233] (II) NVIDIA(0): [DRI2] Setup complete
[ 157.233] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 157.233] (==) RandR enabled
[ 157.233] (II) Initializing built-in extension Generic Event Extension
[ 157.233] (II) Initializing built-in extension SHAPE
[ 157.233] (II) Initializing built-in extension MIT-SHM
[ 157.233] (II) Initializing built-in extension XInputExtension
[ 157.233] (II) Initializing built-in extension XTEST
[ 157.233] (II) Initializing built-in extension BIG-REQUESTS
[ 157.233] (II) Initializing built-in extension SYNC
[ 157.233] (II) Initializing built-in extension XKEYBOARD
[ 157.233] (II) Initializing built-in extension XC-MISC
[ 157.233] (II) Initializing built-in extension SECURITY
[ 157.233] (II) Initializing built-in extension XINERAMA
[ 157.233] (II) Initializing built-in extension XFIXES
[ 157.233] (II) Initializing built-in extension RENDER
[ 157.233] (II) Initializing built-in extension RANDR
[ 157.233] (II) Initializing built-in extension COMPOSITE
[ 157.233] (II) Initializing built-in extension DAMAGE
[ 157.236] (II) Initializing extension GLX
[ 157.423] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 157.423] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 157.423] (II) LoadModule: "evdev"
[ 157.423] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 157.423] (II) Module evdev: vendor="X.Org Foundation"
[ 157.423] compiled for 1.8.0, module version = 2.4.0
[ 157.423] Module class: X.Org XInput Driver
[ 157.423] ABI class: X.Org XInput driver, version 9.0
[ 157.423] (**) Power Button: always reports core events
[ 157.423] (**) Power Button: Device: "/dev/input/event5"
[ 157.433] (II) Power Button: Found keys
[ 157.433] (II) Power Button: Configuring as keyboard
[ 157.433] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 157.433] (**) Option "xkb_rules" "evdev"
[ 157.433] (**) Option "xkb_model" "evdev"
[ 157.433] (**) Option "xkb_layout" "cz"
[ 157.433] (**) Option "xkb_variant" "qwerty"
[ 157.433] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.469] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 157.469] (II) No input driver/identifier specified (ignoring)
[ 157.470] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 157.470] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 157.470] (**) Sleep Button: always reports core events
[ 157.470] (**) Sleep Button: Device: "/dev/input/event3"
[ 157.480] (II) Sleep Button: Found keys
[ 157.480] (II) Sleep Button: Configuring as keyboard
[ 157.480] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 157.480] (**) Option "xkb_rules" "evdev"
[ 157.480] (**) Option "xkb_model" "evdev"
[ 157.480] (**) Option "xkb_layout" "cz"
[ 157.480] (**) Option "xkb_variant" "qwerty"
[ 157.480] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.481] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 157.481] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 157.481] (**) Video Bus: always reports core events
[ 157.481] (**) Video Bus: Device: "/dev/input/event6"
[ 157.490] (II) Video Bus: Found keys
[ 157.490] (II) Video Bus: Configuring as keyboard
[ 157.490] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 157.490] (**) Option "xkb_rules" "evdev"
[ 157.490] (**) Option "xkb_model" "evdev"
[ 157.490] (**) Option "xkb_layout" "cz"
[ 157.490] (**) Option "xkb_variant" "qwerty"
[ 157.490] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.490] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 157.490] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 157.490] (**) Video Bus: always reports core events
[ 157.490] (**) Video Bus: Device: "/dev/input/event7"
[ 157.500] (II) Video Bus: Found keys
[ 157.500] (II) Video Bus: Configuring as keyboard
[ 157.500] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 157.500] (**) Option "xkb_rules" "evdev"
[ 157.500] (**) Option "xkb_model" "evdev"
[ 157.500] (**) Option "xkb_layout" "cz"
[ 157.500] (**) Option "xkb_variant" "qwerty"
[ 157.500] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.501] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 157.501] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 157.501] (**) Power Button: always reports core events
[ 157.501] (**) Power Button: Device: "/dev/input/event4"
[ 157.510] (II) Power Button: Found keys
[ 157.510] (II) Power Button: Configuring as keyboard
[ 157.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 157.510] (**) Option "xkb_rules" "evdev"
[ 157.510] (**) Option "xkb_model" "evdev"
[ 157.510] (**) Option "xkb_layout" "cz"
[ 157.510] (**) Option "xkb_variant" "qwerty"
[ 157.510] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.512] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
[ 157.512] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 157.512] (**) Logitech USB Receiver: always reports core events
[ 157.512] (**) Logitech USB Receiver: Device: "/dev/input/event9"
[ 157.523] (II) Logitech USB Receiver: Found keys
[ 157.523] (II) Logitech USB Receiver: Configuring as keyboard
[ 157.523] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 157.523] (**) Option "xkb_rules" "evdev"
[ 157.523] (**) Option "xkb_model" "evdev"
[ 157.523] (**) Option "xkb_layout" "cz"
[ 157.523] (**) Option "xkb_variant" "qwerty"
[ 157.523] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.524] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[ 157.524] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 157.524] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 157.524] (**) Logitech USB Receiver: always reports core events
[ 157.524] (**) Logitech USB Receiver: Device: "/dev/input/event10"
[ 157.536] (II) Logitech USB Receiver: Found 20 mouse buttons
[ 157.536] (II) Logitech USB Receiver: Found scroll wheel(s)
[ 157.536] (II) Logitech USB Receiver: Found relative axes
[ 157.536] (II) Logitech USB Receiver: Found x and y relative axes
[ 157.536] (II) Logitech USB Receiver: Found absolute axes
[ 157.536] (II) Logitech USB Receiver: Found keys
[ 157.536] (II) Logitech USB Receiver: Configuring as mouse
[ 157.536] (II) Logitech USB Receiver: Configuring as keyboard
[ 157.536] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 157.536] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 157.536] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 157.536] (**) Option "xkb_rules" "evdev"
[ 157.536] (**) Option "xkb_model" "evdev"
[ 157.536] (**) Option "xkb_layout" "cz"
[ 157.536] (**) Option "xkb_variant" "qwerty"
[ 157.536] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.537] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 157.537] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 157.537] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 157.537] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 157.537] (II) Logitech USB Receiver: initialized for relative axes.
[ 157.537] (WW) Logitech USB Receiver: ignoring absolute axes.
[ 157.537] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 157.537] (II) No input driver/identifier specified (ignoring)
[ 157.538] (II) config/udev: Adding input device MLK EU3C Wireless Office 200 (/dev/input/event11)
[ 157.538] (**) MLK EU3C Wireless Office 200: Applying InputClass "evdev keyboard catchall"
[ 157.538] (**) MLK EU3C Wireless Office 200: always reports core events
[ 157.538] (**) MLK EU3C Wireless Office 200: Device: "/dev/input/event11"
[ 157.553] (II) MLK EU3C Wireless Office 200: Found keys
[ 157.553] (II) MLK EU3C Wireless Office 200: Configuring as keyboard
[ 157.553] (II) XINPUT: Adding extended input device "MLK EU3C Wireless Office 200" (type: KEYBOARD)
[ 157.553] (**) Option "xkb_rules" "evdev"
[ 157.553] (**) Option "xkb_model" "evdev"
[ 157.553] (**) Option "xkb_layout" "cz"
[ 157.553] (**) Option "xkb_variant" "qwerty"
[ 157.553] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.554] (II) config/udev: Adding input device MLK EU3C Wireless Office 200 (/dev/input/event12)
[ 157.554] (**) MLK EU3C Wireless Office 200: Applying InputClass "evdev pointer catchall"
[ 157.554] (**) MLK EU3C Wireless Office 200: Applying InputClass "evdev keyboard catchall"
[ 157.554] (**) MLK EU3C Wireless Office 200: always reports core events
[ 157.554] (**) MLK EU3C Wireless Office 200: Device: "/dev/input/event12"
[ 157.566] (II) MLK EU3C Wireless Office 200: Found 9 mouse buttons
[ 157.566] (II) MLK EU3C Wireless Office 200: Found scroll wheel(s)
[ 157.566] (II) MLK EU3C Wireless Office 200: Found relative axes
[ 157.566] (II) MLK EU3C Wireless Office 200: Found x and y relative axes
[ 157.566] (II) MLK EU3C Wireless Office 200: Found absolute axes
[ 157.566] (II) MLK EU3C Wireless Office 200: Found keys
[ 157.566] (II) MLK EU3C Wireless Office 200: Configuring as mouse
[ 157.566] (II) MLK EU3C Wireless Office 200: Configuring as keyboard
[ 157.566] (**) MLK EU3C Wireless Office 200: YAxisMapping: buttons 4 and 5
[ 157.566] (**) MLK EU3C Wireless Office 200: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 157.566] (II) XINPUT: Adding extended input device "MLK EU3C Wireless Office 200" (type: KEYBOARD)
[ 157.566] (**) Option "xkb_rules" "evdev"
[ 157.566] (**) Option "xkb_model" "evdev"
[ 157.566] (**) Option "xkb_layout" "cz"
[ 157.566] (**) Option "xkb_variant" "qwerty"
[ 157.566] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.567] (**) MLK EU3C Wireless Office 200: (accel) keeping acceleration scheme 1
[ 157.567] (**) MLK EU3C Wireless Office 200: (accel) acceleration profile 0
[ 157.567] (**) MLK EU3C Wireless Office 200: (accel) acceleration factor: 2.000
[ 157.567] (**) MLK EU3C Wireless Office 200: (accel) acceleration threshold: 4
[ 157.567] (II) MLK EU3C Wireless Office 200: initialized for relative axes.
[ 157.567] (WW) MLK EU3C Wireless Office 200: ignoring absolute axes.
[ 157.567] (II) config/udev: Adding input device MLK EU3C Wireless Office 200 (/dev/input/mouse2)
[ 157.567] (II) No input driver/identifier specified (ignoring)
[ 157.567] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 157.567] (II) No input driver/identifier specified (ignoring)
[ 157.573] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 157.573] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 157.573] (**) AT Translated Set 2 keyboard: always reports core events
[ 157.573] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 157.580] (II) AT Translated Set 2 keyboard: Found keys
[ 157.580] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 157.580] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 157.580] (**) Option "xkb_rules" "evdev"
[ 157.580] (**) Option "xkb_model" "evdev"
[ 157.580] (**) Option "xkb_layout" "cz"
[ 157.580] (**) Option "xkb_variant" "qwerty"
[ 157.580] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.580] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 157.580] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 157.580] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 157.580] (II) LoadModule: "synaptics"
[ 157.580] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 157.581] (II) Module synaptics: vendor="X.Org Foundation"
[ 157.581] compiled for 1.8.0.902, module version = 1.2.2
[ 157.581] Module class: X.Org XInput Driver
[ 157.581] ABI class: X.Org XInput driver, version 9.0
[ 157.581] (II) Synaptics touchpad driver version 1.2.2
[ 157.581] (**) Option "Device" "/dev/input/event8"
[ 157.620] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 157.620] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 157.620] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 157.620] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 157.620] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 157.620] (**) Option "TapButton1" "1"
[ 157.620] (**) Option "TapButton2" "2"
[ 157.620] (**) Option "TapButton3" "3"
[ 157.646] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 157.646] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 157.660] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 157.660] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 157.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 157.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 157.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 157.686] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 157.686] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 157.686] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 157.686] (II) Synaptics touchpad driver version 1.2.2
[ 158.333] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 158.333] (**) Option "Device" "/dev/input/mouse0"
[ 158.346] (**) Option "TapButton1" "1"
[ 158.346] (**) Option "TapButton2" "2"
[ 158.346] (**) Option "TapButton3" "3"
[ 158.366] Query no Synaptics: 6003C8
[ 158.366] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 158.367] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 158.406] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 158.406] (II) UnloadModule: "synaptics"
[ 158.406] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 158.406] (II) No input driver/identifier specified (ignoring)
[ 222.970] (II) Power Button: Close
[ 222.970] (II) UnloadModule: "evdev"
[ 222.990] (II) Sleep Button: Close
[ 222.990] (II) UnloadModule: "evdev"
[ 223.016] (II) Video Bus: Close
[ 223.016] (II) UnloadModule: "evdev"
[ 223.036] (II) Video Bus: Close
[ 223.036] (II) UnloadModule: "evdev"
[ 223.056] (II) Power Button: Close
[ 223.056] (II) UnloadModule: "evdev"
[ 223.076] (II) Logitech USB Receiver: Close
[ 223.076] (II) UnloadModule: "evdev"
[ 223.096] (II) Logitech USB Receiver: Close
[ 223.096] (II) UnloadModule: "evdev"
[ 223.116] (II) MLK EU3C Wireless Office 200: Close
[ 223.116] (II) UnloadModule: "evdev"
[ 223.136] (II) MLK EU3C Wireless Office 200: Close
[ 223.136] (II) UnloadModule: "evdev"
[ 223.156] (II) AT Translated Set 2 keyboard: Close
[ 223.156] (II) UnloadModule: "evdev"
[ 223.190] (II) UnloadModule: "synaptics"
$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.35 ([email protected]) Wed Jun 16 19:15:05 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSectionI was having this exact same problem, then it just stopped. I am using the nouveau driver and I have a tnt2 card.
IIRC, I was having an unrelated problem with xorg or udev or something was having problems detecting my monitor, it claimed I had two monitors connected, I wrote an xorg.conf file and that fixed the problem. IDK if its is related or not because I don't recall exactly when things started working when I would switch ttys.
Try using the nouveau driver and see if it does the same thing, it has a kernel module so it might make difference,
Last edited by RiceKills (2010-07-06 23:39:27) -
NVIDIA Optimus on MSI GE70 2OE: No screens, then server fails to start
Hello,
I have recently acquired an MSI GE70 2OE-071 laptop with the following configuration, intending to run Arch Linux (dual boot with Windows 7) on it:
CPU: Intel Core i7-4700 MQ
GPU: Nvidia GeForce GTX 765M (2 GB DDR5 memory)
LCD: 17.3" FHD 1920x1080
Memory: 12 GB DDR3
HDD: 1 TB 7200 RPM
I originally installed Arch Linux the same way as described in the beginner's guide. I could get the basic twm setup to work, but the moment I installed the proprietary drivers (using pacman -S nvidia, followed by nvidia-xconfig, followed by a reboot), X Windows crashed, i.e. I started getting the No screens found error. So after some days of digging, I found the NVIDIA Optimus wiki page. Following the advice here, I could get rid of this error, but I still cannot get into the GUI, because the server terminates. There is no hardware problem that I can think of because Manjaro Linux works fine, and being a perpetual Arch novice eager to learn, I just wanted to get this thing to work from the ground up.
So I'd really appreciate some help.
Here are the relevant files and command outputs.
uname -a. url = http://bpaste.net/show/166840/
Linux gluon 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64 GNU/Linux
.xinitrc. url = http://bpaste.net/show/166837/
xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto
/etc/X11/xorg.conf. url = http://bpaste.net/show/166838/
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:53 PDT 2013
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:1:0:0" # manually added
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/var/log/Xorg.0.log. url = http://bpaste.net/show/166839/
[ 1684.463]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 1684.465] X Protocol Version 11, Revision 0
[ 1684.465] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 1684.466] Current Operating System: Linux gluon 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
[ 1684.466] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
[ 1684.467] Build Date: 06 January 2014 10:25:32PM
[ 1684.467]
[ 1684.468] Current version of pixman: 0.32.4
[ 1684.469] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1684.469] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1684.472] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 11 07:17:09 2014
[ 1684.472] (==) Using config file: "/etc/X11/xorg.conf"
[ 1684.473] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1684.473] (==) ServerLayout "Layout0"
[ 1684.473] (**) |-->Screen "Screen0" (0)
[ 1684.473] (**) | |-->Monitor "Monitor0"
[ 1684.473] (**) | |-->Device "Device0"
[ 1684.473] (**) |-->Input Device "Keyboard0"
[ 1684.473] (**) |-->Input Device "Mouse0"
[ 1684.473] (==) Automatically adding devices
[ 1684.473] (==) Automatically enabling devices
[ 1684.473] (==) Automatically adding GPU devices
[ 1684.473] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1684.473] Entry deleted from font path.
[ 1684.473] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1684.473] Entry deleted from font path.
[ 1684.473] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1684.473] Entry deleted from font path.
[ 1684.473] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1684.473] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1684.473] Entry deleted from font path.
[ 1684.473] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1684.473] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 1684.473] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1684.473] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1684.473] (WW) Disabling Keyboard0
[ 1684.473] (WW) Disabling Mouse0
[ 1684.473] (II) Loader magic: 0x7fac20
[ 1684.473] (II) Module ABI versions:
[ 1684.473] X.Org ANSI C Emulation: 0.4
[ 1684.473] X.Org Video Driver: 14.1
[ 1684.473] X.Org XInput driver : 19.1
[ 1684.473] X.Org Server Extension : 7.0
[ 1684.473] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1684.473] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1684.474] (--) PCI:*(0:0:2:0) 8086:0416:1462:10e1 rev 6, Mem @ 0xf7400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 1684.474] (--) PCI: (0:1:0:0) 10de:11e2:1462:10e1 rev 161, Mem @ 0xf6000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 1684.475] Initializing built-in extension Generic Event Extension
[ 1684.476] Initializing built-in extension SHAPE
[ 1684.476] Initializing built-in extension MIT-SHM
[ 1684.477] Initializing built-in extension XInputExtension
[ 1684.478] Initializing built-in extension XTEST
[ 1684.478] Initializing built-in extension BIG-REQUESTS
[ 1684.479] Initializing built-in extension SYNC
[ 1684.479] Initializing built-in extension XKEYBOARD
[ 1684.480] Initializing built-in extension XC-MISC
[ 1684.481] Initializing built-in extension SECURITY
[ 1684.481] Initializing built-in extension XINERAMA
[ 1684.482] Initializing built-in extension XFIXES
[ 1684.482] Initializing built-in extension RENDER
[ 1684.483] Initializing built-in extension RANDR
[ 1684.484] Initializing built-in extension COMPOSITE
[ 1684.484] Initializing built-in extension DAMAGE
[ 1684.485] Initializing built-in extension MIT-SCREEN-SAVER
[ 1684.485] Initializing built-in extension DOUBLE-BUFFER
[ 1684.486] Initializing built-in extension RECORD
[ 1684.487] Initializing built-in extension DPMS
[ 1684.487] Initializing built-in extension X-Resource
[ 1684.488] Initializing built-in extension XVideo
[ 1684.488] Initializing built-in extension XVideo-MotionCompensation
[ 1684.489] Initializing built-in extension XFree86-VidModeExtension
[ 1684.489] Initializing built-in extension XFree86-DGA
[ 1684.490] Initializing built-in extension XFree86-DRI
[ 1684.490] Initializing built-in extension DRI2
[ 1684.490] (II) LoadModule: "glx"
[ 1684.490] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1684.490] (II) Module glx: vendor="X.Org Foundation"
[ 1684.490] compiled for 1.14.5, module version = 1.0.0
[ 1684.490] ABI class: X.Org Server Extension, version 7.0
[ 1684.490] (==) AIGLX enabled
[ 1684.491] Loading extension GLX
[ 1684.491] (II) LoadModule: "nvidia"
[ 1684.491] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1684.491] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1684.491] compiled for 4.0.2, module version = 1.0.0
[ 1684.491] Module class: X.Org Video Driver
[ 1684.491] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 1684.491] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1684.491] (++) using VT number 1
[ 1684.491] (II) Loading sub module "fb"
[ 1684.491] (II) LoadModule: "fb"
[ 1684.491] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1684.491] (II) Module fb: vendor="X.Org Foundation"
[ 1684.491] compiled for 1.14.5, module version = 1.0.0
[ 1684.491] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1684.491] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 1684.491] (II) Loading sub module "wfb"
[ 1684.491] (II) LoadModule: "wfb"
[ 1684.491] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1684.491] (II) Module wfb: vendor="X.Org Foundation"
[ 1684.491] compiled for 1.14.5, module version = 1.0.0
[ 1684.491] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1684.491] (II) Loading sub module "ramdac"
[ 1684.491] (II) LoadModule: "ramdac"
[ 1684.491] (II) Module "ramdac" already built-in
[ 1684.491] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 1684.491] (==) NVIDIA(0): RGB weight 888
[ 1684.492] (==) NVIDIA(0): Default visual is TrueColor
[ 1684.492] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1684.492] (**) NVIDIA(0): Enabling 2D acceleration
[ 1684.492] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 1684.492] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 1684.492] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 1684.492] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 1684.492] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 1684.654] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 1684.655] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 765M (GK106) at PCI:1:0:0 (GPU-0)
[ 1684.655] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 1684.655] (--) NVIDIA(0): VideoBIOS: 80.06.5d.00.09
[ 1684.655] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1684.655] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 765M at PCI:1:0:0
[ 1684.655] (--) NVIDIA(0): none
[ 1684.655] (II) NVIDIA(0): Validated MetaModes:
[ 1684.655] (II) NVIDIA(0): "NULL"
[ 1684.655] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 1684.655] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 1684.655] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 1684.655] (--) Depth 24 pixmap format is 32 bpp
[ 1684.655] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 1684.655] (II) NVIDIA: access.
[ 1684.661] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1684.661] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1684.661] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1684.661] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1684.661] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1684.661] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1684.661] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1684.661] (II) NVIDIA(0): Config Options in the README.
[ 1684.661] (II) NVIDIA(0): Setting mode "NULL"
[ 1684.661] (EE) NVIDIA(0): Failed to initiate mode change.
[ 1684.661] (EE) NVIDIA(0): Failed to complete mode change
[ 1684.668] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 1684.668] Loading extension NV-GLX
[ 1684.670] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1684.670] (==) NVIDIA(0): Backing store disabled
[ 1684.670] (==) NVIDIA(0): Silken mouse enabled
[ 1684.670] (**) NVIDIA(0): DPMS enabled
[ 1684.670] Loading extension NV-CONTROL
[ 1684.670] (II) Loading sub module "dri2"
[ 1684.670] (II) LoadModule: "dri2"
[ 1684.670] (II) Module "dri2" already built-in
[ 1684.670] (II) NVIDIA(0): [DRI2] Setup complete
[ 1684.670] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1684.670] (--) RandR disabled
[ 1684.673] (II) AIGLX: Screen 0 is not DRI2 capable
[ 1684.673] (II) AIGLX: Screen 0 is not DRI capable
[ 1684.680] (II) AIGLX: Loaded and initialized swrast
[ 1684.680] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 1684.697] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1684.697] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1684.697] (II) LoadModule: "evdev"
[ 1684.697] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1684.697] (II) Module evdev: vendor="X.Org Foundation"
[ 1684.697] compiled for 1.14.3, module version = 2.8.2
[ 1684.697] Module class: X.Org XInput Driver
[ 1684.697] ABI class: X.Org XInput driver, version 19.1
[ 1684.697] (II) Using input driver 'evdev' for 'Power Button'
[ 1684.697] (**) Power Button: always reports core events
[ 1684.697] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 1684.697] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1684.697] (--) evdev: Power Button: Found keys
[ 1684.697] (II) evdev: Power Button: Configuring as keyboard
[ 1684.697] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 1684.697] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1684.697] (**) Option "xkb_rules" "evdev"
[ 1684.697] (**) Option "xkb_model" "pc104"
[ 1684.697] (**) Option "xkb_layout" "us"
[ 1684.709] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 1684.709] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1684.709] (II) Using input driver 'evdev' for 'Video Bus'
[ 1684.709] (**) Video Bus: always reports core events
[ 1684.709] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 1684.709] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1684.709] (--) evdev: Video Bus: Found keys
[ 1684.709] (II) evdev: Video Bus: Configuring as keyboard
[ 1684.709] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13/event12"
[ 1684.709] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 1684.709] (**) Option "xkb_rules" "evdev"
[ 1684.709] (**) Option "xkb_model" "pc104"
[ 1684.709] (**) Option "xkb_layout" "us"
[ 1684.709] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 1684.709] (II) No input driver specified, ignoring this device.
[ 1684.709] (II) This device may have been added with another device file.
[ 1684.709] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 1684.709] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1684.709] (II) Using input driver 'evdev' for 'Video Bus'
[ 1684.709] (**) Video Bus: always reports core events
[ 1684.709] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 1684.709] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1684.709] (--) evdev: Video Bus: Found keys
[ 1684.709] (II) evdev: Video Bus: Configuring as keyboard
[ 1684.709] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:48/LNXVIDEO:00/input/input12/event11"
[ 1684.709] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 1684.709] (**) Option "xkb_rules" "evdev"
[ 1684.709] (**) Option "xkb_model" "pc104"
[ 1684.709] (**) Option "xkb_layout" "us"
[ 1684.710] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1684.710] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1684.710] (II) Using input driver 'evdev' for 'Power Button'
[ 1684.710] (**) Power Button: always reports core events
[ 1684.710] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 1684.710] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1684.710] (--) evdev: Power Button: Found keys
[ 1684.710] (II) evdev: Power Button: Configuring as keyboard
[ 1684.710] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event2"
[ 1684.710] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 1684.710] (**) Option "xkb_rules" "evdev"
[ 1684.710] (**) Option "xkb_model" "pc104"
[ 1684.710] (**) Option "xkb_layout" "us"
[ 1684.710] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 1684.710] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event15)
[ 1684.710] (II) No input driver specified, ignoring this device.
[ 1684.710] (II) This device may have been added with another device file.
[ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event14)
[ 1684.710] (II) No input driver specified, ignoring this device.
[ 1684.710] (II) This device may have been added with another device file.
[ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event13)
[ 1684.710] (II) No input driver specified, ignoring this device.
[ 1684.710] (II) This device may have been added with another device file.
[ 1684.710] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event9)
[ 1684.710] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[ 1684.710] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[ 1684.710] (**) BisonCam, NB Pro: always reports core events
[ 1684.710] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event9"
[ 1684.710] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x14c
[ 1684.710] (--) evdev: BisonCam, NB Pro: Found keys
[ 1684.710] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 1684.710] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input11/event9"
[ 1684.710] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 10)
[ 1684.710] (**) Option "xkb_rules" "evdev"
[ 1684.710] (**) Option "xkb_model" "pc104"
[ 1684.710] (**) Option "xkb_layout" "us"
[ 1684.711] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 1684.711] (II) No input driver specified, ignoring this device.
[ 1684.711] (II) This device may have been added with another device file.
[ 1684.711] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 1684.711] (II) No input driver specified, ignoring this device.
[ 1684.711] (II) This device may have been added with another device file.
[ 1684.711] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[ 1684.711] (II) No input driver specified, ignoring this device.
[ 1684.711] (II) This device may have been added with another device file.
[ 1684.711] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1684.711] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1684.711] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1684.711] (**) AT Translated Set 2 keyboard: always reports core events
[ 1684.711] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1684.711] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1684.711] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1684.711] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1684.711] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1684.711] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 1684.711] (**) Option "xkb_rules" "evdev"
[ 1684.711] (**) Option "xkb_model" "pc104"
[ 1684.711] (**) Option "xkb_layout" "us"
[ 1684.711] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 1684.711] (II) LoadModule: "synaptics"
[ 1684.711] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1684.711] (II) Module synaptics: vendor="X.Org Foundation"
[ 1684.711] compiled for 1.14.4, module version = 1.7.2
[ 1684.711] Module class: X.Org XInput Driver
[ 1684.711] ABI class: X.Org XInput driver, version 19.1
[ 1684.711] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 1684.711] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 1684.711] (**) Option "Device" "/dev/input/event10"
[ 1684.783] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 33)
[ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 33)
[ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 1684.783] (**) Option "TapButton1" "1"
[ 1684.783] (**) Option "TapButton2" "2"
[ 1684.783] (**) Option "TapButton3" "3"
[ 1684.783] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 1684.783] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 1684.809] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event10"
[ 1684.809] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 1684.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 1684.810] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 1684.810] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 1684.810] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 1684.810] (II) No input driver specified, ignoring this device.
[ 1684.810] (II) This device may have been added with another device file.
[ 1684.810] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event5)
[ 1684.810] (**) MSI WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 1684.810] (II) Using input driver 'evdev' for 'MSI WMI hotkeys'
[ 1684.810] (**) MSI WMI hotkeys: always reports core events
[ 1684.810] (**) evdev: MSI WMI hotkeys: Device: "/dev/input/event5"
[ 1684.810] (--) evdev: MSI WMI hotkeys: Vendor 0 Product 0
[ 1684.810] (--) evdev: MSI WMI hotkeys: Found keys
[ 1684.810] (II) evdev: MSI WMI hotkeys: Configuring as keyboard
[ 1684.810] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event5"
[ 1684.810] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 13)
[ 1684.810] (**) Option "xkb_rules" "evdev"
[ 1684.810] (**) Option "xkb_model" "pc104"
[ 1684.810] (**) Option "xkb_layout" "us"
[ 1685.097] (II) evdev: MSI WMI hotkeys: Close
[ 1685.097] (II) UnloadModule: "evdev"
[ 1685.097] (II) UnloadModule: "synaptics"
[ 1685.097] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1685.097] (II) UnloadModule: "evdev"
[ 1685.097] (II) evdev: BisonCam, NB Pro: Close
[ 1685.097] (II) UnloadModule: "evdev"
[ 1685.097] (II) evdev: Power Button: Close
[ 1685.097] (II) UnloadModule: "evdev"
[ 1685.097] (II) evdev: Video Bus: Close
[ 1685.097] (II) UnloadModule: "evdev"
[ 1685.097] (II) evdev: Video Bus: Close
[ 1685.097] (II) UnloadModule: "evdev"
[ 1685.097] (II) evdev: Power Button: Close
[ 1685.097] (II) UnloadModule: "evdev"
[ 1685.116] (II) NVIDIA(GPU-0): Deleting GPU-0
[b][ 1685.120] (EE) Server terminated successfully (0). Closing log file.[/b]
lspci. url = http://bpaste.net/show/166842/
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5227 (rev 01)
04:00.0 Ethernet controller: Qualcomm Atheros Killer E2200 Gigabit Ethernet Controller (rev 13)
05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter
dmesg. url: http://bpaste.net/show/166841/
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b171fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b172000-0x000000009b178fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009b179000-0x000000009b8e8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b8e9000-0x000000009bb55fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009bb56000-0x00000000ab48ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ab490000-0x00000000ab697fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ab698000-0x00000000ab78bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ab78c000-0x00000000abb73fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000abb74000-0x00000000abffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000abfff000-0x00000000abffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000034fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. GE70 2OC\2OE/MS-1757, BIOS E1757IMS.10E 07/15/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x34fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7F00000000 write-back
[ 0.000000] 2 base 0300000000 mask 7F80000000 write-back
[ 0.000000] 3 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 4 base 00B0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00AE000000 mask 7FFE000000 uncachable
[ 0.000000] 6 base 00AD000000 mask 7FFF000000 uncachable
[ 0.000000] 7 base 0360000000 mask 7FE0000000 uncachable
[ 0.000000] 8 base 0350000000 mask 7FF0000000 uncachable
[ 0.000000] 9 base 034FE00000 mask 7FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xad000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xac000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x34fc00000-0x34fdfffff]
[ 0.000000] [mem 0x34fc00000-0x34fdfffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x34c000000-0x34fbfffff]
[ 0.000000] [mem 0x34c000000-0x34fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x300000000-0x34bffffff]
[ 0.000000] [mem 0x300000000-0x33fffffff] page 1G
[ 0.000000] [mem 0x340000000-0x34bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b171fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9affffff] page 2M
[ 0.000000] [mem 0x9b000000-0x9b171fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9b179000-0x9b8e8fff]
[ 0.000000] [mem 0x9b179000-0x9b1fffff] page 4k
[ 0.000000] [mem 0x9b200000-0x9b7fffff] page 2M
[ 0.000000] [mem 0x9b800000-0x9b8e8fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9bb56000-0xab48ffff]
[ 0.000000] [mem 0x9bb56000-0x9bbfffff] page 4k
[ 0.000000] [mem 0x9bc00000-0xab3fffff] page 2M
[ 0.000000] [mem 0xab400000-0xab48ffff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xab698000-0xab78bfff]
[ 0.000000] [mem 0xab698000-0xab78bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xabfff000-0xabffffff]
[ 0.000000] [mem 0xabfff000-0xabffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[ 0.000000] [mem 0x100000000-0x2ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x379fc000-0x37cf5fff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 MSI_NB)
[ 0.000000] ACPI: XSDT 00000000ab814098 000AC (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000ab8206b0 0010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000ab8141d8 0C4D4 (v02 MSI_NB MEGABOOK 00000022 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000abb72080 00040
[ 0.000000] ACPI: APIC 00000000ab8207c0 00092 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000ab820858 00044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 00000000ab8208a0 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 00000000ab820948 00200 (v01 INTEL sensrhub 00000000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000ab820b48 0019D (v01 Intel zpodd 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000ab820ce8 00176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000ab820e60 00575 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000ab8213d8 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 00000000ab821eb0 0003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000ab821ef0 00038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000ab821f28 00315 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ab822240 0355D (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ab8257a0 011FD (v01 SgRef SgPeg 00001000 INTL 20091112)
[ 0.000000] ACPI: MSFF 00000000ab8269a0 00029 (v01 MSI_NB MEGABOOK 00000010 AMI 00010013)
[ 0.000000] ACPI: DMAR 00000000ab8269d0 00090 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 00000000ab826a60 01464 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000034fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x34fdfffff]
[ 0.000000] NODE_DATA [mem 0x34fdf6000-0x34fdfafff]
[ 0.000000] [ffffea0000000000-ffffea000d3fffff] PMD -> [ffff880343400000-ffff88034f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x34fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x9b171fff]
[ 0.000000] node 0: [mem 0x9b179000-0x9b8e8fff]
[ 0.000000] node 0: [mem 0x9bb56000-0xab48ffff]
[ 0.000000] node 0: [mem 0xab698000-0xab78bfff]
[ 0.000000] node 0: [mem 0xabfff000-0xabffffff]
[ 0.000000] node 0: [mem 0x100000000-0x34fdfffff]
[ 0.000000] On node 0 totalpages: 3125421
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10893 pages used for memmap
[ 0.000000] DMA32 zone: 697105 pages, LIFO batch:31
[ 0.000000] Normal zone: 37880 pages used for memmap
[ 0.000000] Normal zone: 2424320 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b172000-0x9b178fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b8e9000-0x9bb55fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xab490000-0xab697fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xab78c000-0xabb73fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xabb74000-0xabffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xac000000-0xacffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xaf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88034fa00000 s86464 r8192 d24128 u262144
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3076563
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
[ 0.000000] Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: American Megatrends Inc.; Ver: E1757IMS.10E; Product Version: REV:1.0
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.6-1-ARCH #1
[ 0.000000] Hardware name: Micro-Star International Co., Ltd. GE70 2OC\2OE/MS-1757, BIOS E1757IMS.10E 07/15/2013
[ 0.000000] 000000000000000b ffffffff81801de8 ffffffff814ee4fb ffffffff81801e30
[ 0.000000] ffffffff81801e20 ffffffff81062bcd ffffffff81b3101c ffffffff81b3106c
[ 0.000000] 0000000000000000 ffff88034fdaad00 ffffffff819f4000 ffffffff81801e80
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff814ee4fb>] dump_stack+0x54/0x8d
[ 0.000000] [<ffffffff81062bcd>] warn_slowpath_common+0x7d/0xa0
[ 0.000000] [<ffffffff81062c84>] warn_slowpath_fmt_taint+0x44/0x50
[ 0.000000] [<ffffffff818fb9d9>] ? early_ioremap+0x13/0x15
[ 0.000000] [<ffffffff818f1b3f>] ? __acpi_map_table+0x13/0x18
[ 0.000000] [<ffffffff813d98be>] warn_invalid_dmar+0x7e/0x90
[ 0.000000] [<ffffffff81927a65>] check_zero_address+0x68/0xf4
[ 0.000000] [<ffffffff81927b06>] detect_intel_iommu+0x15/0xae
[ 0.000000] [<ffffffff818ebd5a>] pci_iommu_alloc+0x4a/0x6c
[ 0.000000] [<ffffffff818fb3af>] mem_init+0x17/0x9c
[ 0.000000] [<ffffffff818e1ccb>] start_kernel+0x1de/0x420
[ 0.000000] [<ffffffff818e18f6>] ? repair_env_string+0x5c/0x5c
[ 0.000000] [<ffffffff818e1120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff818e15de>] x86_64_start_reservations+0x2a/0x2c
[ 0.000000] [<ffffffff818e16e8>] x86_64_start_kernel+0x108/0x117
[ 0.000000] ---[ end trace ed55042d28ea2d46 ]---
[ 0.000000] Memory: 12223184K/12501684K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 278500K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 50331648 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2394.605 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.76 BogoMIPS (lpj=7982016)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000023] Security Framework initialized
[ 0.000028] AppArmor: AppArmor disabled by boot time parameter
[ 0.000029] Yama: becoming mindful.
[ 0.000723] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.002956] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003897] Mount-cache hash table entries: 256
[ 0.004021] Initializing cgroup subsys memory
[ 0.004028] Initializing cgroup subsys devices
[ 0.004029] Initializing cgroup subsys freezer
[ 0.004030] Initializing cgroup subsys net_cls
[ 0.004031] Initializing cgroup subsys blkio
[ 0.004047] CPU: Physical Processor ID: 0
[ 0.004047] CPU: Processor Core ID: 0
[ 0.004050] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.004809] mce: CPU supports 9 MCE banks
[ 0.004819] CPU0: Thermal monitoring enabled (TM1)
[ 0.004828] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
[ 0.004901] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.005496] ACPI: Core revision 20130725
[ 0.012467] ACPI: All ACPI Tables successfully acquired
[ 0.014025] ftrace: allocating 20318 entries in 80 pages
[ 0.020098] dmar: Host address width 39
[ 0.020099] dmar: DRHD base: 0x00000000000000 flags: 0x1
[ 0.020100] dmar: parse DMAR table failure.
[ 0.020489] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053520] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
[ 0.053525] TSC deadline timer enabled
[ 0.053531] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.053535] ... version: 3
[ 0.053536] ... bit width: 48
[ 0.053537] ... generic registers: 4
[ 0.053537] ... value mask: 0000ffffffffffff
[ 0.053538] ... max period: 0000ffffffffffff
[ 0.053539] ... fixed-purpose events: 3
[ 0.053539] ... event mask: 000000070000000f
[ 0.094311] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080318] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
[ 0.218665] Brought up 8 CPUs
[ 0.218667] smpboot: Total of 8 processors activated (38329.08 BogoMIPS)
[ 0.224614] devtmpfs: initialized
[ 0.226265] PM: Registering ACPI NVS region [mem 0x9b172000-0x9b178fff] (28672 bytes)
[ 0.226266] PM: Registering ACPI NVS region [mem 0xab78c000-0xabb73fff] (4096000 bytes)
[ 0.226792] RTC time: 6:49:04, date: 01/11/14
[ 0.226816] NET: Registered protocol family 16
[ 0.226875] cpuidle: using governor ladder
[ 0.226876] cpuidle: using governor menu
[ 0.226893] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.226894] ACPI: bus type PCI registered
[ 0.226896] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.226930] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.226931] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.231360] PCI: Using configuration type 1 for base access
[ 0.231828] bio: create slab <bio-0> at 0
[ 0.231908] ACPI: Added _OSI(Module Device)
[ 0.231909] ACPI: Added _OSI(Processor Device)
[ 0.231910] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.231911] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.233324] ACPI: EC: Detected MSI hardware, enabling workarounds.
[ 0.233326] ACPI: EC: Look up EC in DSDT
[ 0.233774] ACPI Error: No handler for Region [EC__] (ffff88033e484c18) [EmbeddedControl] (20130725/evregion-162)
[ 0.233777] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130725/exfldio-305)
[ 0.233779] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC__._REG] (Node ffff88033e4852f8), AE_NOT_EXIST (20130725/psparse-536)
[ 0.234482] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.268613] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.284659] ACPI: SSDT 00000000ab68dc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.285133] ACPI: Dynamic OEM Table Load:
[ 0.285135] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.298133] ACPI: SSDT 00000000ab68d618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.298671] ACPI: Dynamic OEM Table Load:
[ 0.298673] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.314712] ACPI: SSDT 00000000ab68cd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.315188] ACPI: Dynamic OEM Table Load:
[ 0.315190] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.339941] ACPI: Interpreter enabled
[ 0.339948] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.339953] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.339965] ACPI: (supports S0 S3 S4 S5)
[ 0.339967] ACPI: Using IOAPIC for interrupt routing
[ 0.339990] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.340148] ACPI: No dock devices found.
[ 0.366372] ACPI: Power Resource [FN00] (off)
[ 0.366419] ACPI: Power Resource [FN01] (off)
[ 0.366465] ACPI: Power Resource [FN02] (off)
[ 0.366511] ACPI: Power Resource [FN03] (off)
[ 0.366555] ACPI: Power Resource [FN04] (off)
[ 0.367075] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.367173] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.367293] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[ 0.367577] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
[ 0.367642] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[ 0.367643] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5)
[ 0.367659] ACPI: \_SB_.PCI0.WMI1: can't evaluate _ADR (0x5)
[ 0.367660] PCI host bridge to bus 0000:00
[ 0.367662] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.367663] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.367664] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.367665] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.367666] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.367667] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.367668] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.367669] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.367670] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.367671] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.367672] pci_bus 0000:00: root bus resource [mem 0xaf200000-0xfeafffff]
[ 0.367677] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.367735] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.367760] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.367794] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.367819] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.367827] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.367832] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.367835] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.367887] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.367893] pci 0000:00:03.0: reg 0x10: [mem 0xf7b14000-0xf7b17fff 64bit]
[ 0.367970] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.367986] pci 0000:00:14.0: reg 0x10: [mem 0xf7b00000-0xf7b0ffff 64bit]
[ 0.368043] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.368071] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.368097] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.368113] pci 0000:00:16.0: reg 0x10: [mem 0xf7b1e000-0xf7b1e00f 64bit]
[ 0.368169] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.368229] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.368247] pci 0000:00:1a.0: reg 0x10: [mem 0xf7b1c000-0xf7b1c3ff]
[ 0.368328] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.368366] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.368391] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.368403] pci 0000:00:1b.0: reg 0x10: [mem 0xf7b10000-0xf7b13fff 64bit]
[ 0.368460] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.368490] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.368512] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.368569] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.368599] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.368621] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.368678] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.368709] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.368731] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.368787] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.368817] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.368839] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.368896] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.368926] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.368953] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.368972] pci 0000:00:1d.0: reg 0x10: [mem 0xf7b1b000-0xf7b1b3ff]
[ 0.369051] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.369089] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.369114] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[ 0.369249] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.369263] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.369269] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.369276] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.369283] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.369289] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.369296] pci 0000:00:1f.2: reg 0x24: [mem 0xf7b1a000-0xf7b1a7ff]
[ 0.369328] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.369373] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.369385] pci 0000:00:1f.3: reg 0x10: [mem 0xf7b19000-0xf7b190ff 64bit]
[ 0.369403] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.369506] pci 0000:01:00.0: [10de:11e2] type 00 class 0x030200
[ 0.369520] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.369537] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.369552] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.369563] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.369574] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.369649] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.374726] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.374728] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.374730] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.374733] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.374803] acpiphp: Slot [1] registered
[ 0.374809] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.374970] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
[ 0.375028] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a00fff]
[ 0.375359] pci 0000:03:00.0: supports D1 D2
[ 0.375360] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.375443] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.381443] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.381448] pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.381581] pci 0000:04:00.0: [1969:e091] type 00 class 0x020000
[ 0.381627] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
[ 0.381672] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.381900] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.381990] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.388100] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.388104] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.388108] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.388207] pci 0000:05:00.0: [10ec:8723] type 00 class 0x028000
[ 0.388235] pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.388284] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7803fff 64bit]
[ 0.388429] pci 0000:05:00.0: supports D1 D2
[ 0.388430] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.388469] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.394758] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.394762] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.394766] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.394830] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.402198] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.402232] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.402263] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.402295] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.402326] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.402357] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.402388] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.402419] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.402688] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.402692] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.402741] Found 1 acpi root devices
[ 0.402767] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.402823] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.402826] vgaarb: loaded
[ 0.402826] vgaarb: bridge control possible 0000:00:02.0
[ 0.402849] PCI: Using ACPI for IRQ routing
[ 0.404045] PCI: pci_cache_line_size set to 64 bytes
[ 0.404093] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.404094] e820: reserve RAM buffer [mem 0x9b172000-0x9bffffff]
[ 0.404095] e820: reserve RAM buffer [mem 0x9b8e9000-0x9bffffff]
[ 0.404096] e820: reserve RAM buffer [mem 0xab490000-0xabffffff]
[ 0.404097] e820: reserve RAM buffer [mem 0xab78c000-0xabffffff]
[ 0.404098] e820: reserve RAM buffer [mem 0x34fe00000-0x34fffffff]
[ 0.404149] NetLabel: Initializing
[ 0.404150] NetLabel: domain hash size = 128
[ 0.404150] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.404157] NetLabel: unlabeled traffic allowed by default
[ 0.404169] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.404172] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.406193] Switched to clocksource hpet
[ 0.408777] pnp: PnP ACPI init
[ 0.408783] ACPI: bus type PNP registered
[ 0.408822] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.408824] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.408831] pnp 00:01: [dma 4]
[ 0.408839] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.408852] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.408908] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.408937] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.409005] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.409006] system 00:05: [io 0xffff] has been reserved
[ 0.409007] system 00:05: [io 0xffff] has been reserved
[ 0.409008] system 00:05: [io 0xffff] has been reserved
[ 0.409010] system 00:05: [io 0x1c00-0x1cfe] has been reserved
[ 0.409011] system 00:05: [io 0x1d00-0x1dfe] has been reserved
[ 0.409012] system 00:05: [io 0x1e00-0x1efe] has been reserved
[ 0.409013] system 00:05: [io 0x1f00-0x1ffe] has been reserved
[ 0.409015] system 00:05: [io 0x1800-0x18fe] could not be reserved
[ 0.409016] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.409017] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.409033] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.409058] system 00:07: [io 0x1854-0x1857] has been reserved
[ 0.409060] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.409121] system 00:08: [io 0x0680-0x068f] has been reserved
[ 0.409122] system 00:08: [io 0x0c10-0x0c1f] has been reserved
[ 0.409123] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.409150] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.409152] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.409182] pnp 00:0a: Plug and Play ACPI device, IDs ETD0301 PNP0f13 SYN1500 SYN0002 (active)
[ 0.409206] pnp 00:0b: Plug and Play ACPI device, IDs MSI0001 PNP030b (active)
[ 0.412551] pnp 00:0c: Plug and Play ACPI device, IDs ENE0110 (active)
[ 0.416130] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.416131] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.416132] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.416133] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.416135] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.416136] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.416137] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.416138] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.416139] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
[ 0.416140] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.416142] system 00:0d: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.416143] system 00:0d: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.416144] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.416328] pnp: PnP ACPI: found 14 devices
[ 0.416329] ACPI: bus type PNP unregistered
[ 0.422174] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.422176] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.422177] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.422195] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.422196] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.422197] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.422200] pci 0000:00:1c.0: BAR 14: assigned [mem 0xaf200000-0xaf3fffff]
[ 0.422202] pci 0000:00:1c.0: BAR 15: assigned [mem 0xaf400000-0xaf5fffff 64bit pref]
[ 0.422203] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.422205] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.422206] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.422208] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.422210] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.422213] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.422215] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.422219] pci 0000:00:1c.0: bridge window [mem 0xaf200000-0xaf3fffff]
[ 0.422222] pci 0000:00:1c.0: bridge window [mem 0xaf400000-0xaf5fffff 64bit pref]
[ 0.422227] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.422231] pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.422238] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.422240] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.422244] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.422251] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.422253] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.422257] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.422264] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.422265] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.422266] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.422267] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.422268] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.422269] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.422270] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.422271] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.422272] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.422273] pci_bus 0000:00: resource 13 [mem 0xaf200000-0xfeafffff]
[ 0.422274] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.422275] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.422276] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.422277] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.422278] pci_bus 0000:02: resource 1 [mem 0If I understand this correctly, then you have an Optimus graphics card (couldn't find anything online, but your lspci looks like it). I too have such a setup on my laptop. The thing to keep in mind here, is that your main graphics card is the Intel integrated card. So instead of installing your system like with an nvidia card, you install it like an intel card. Specifically, you would want to follow the instructions on Bumblebee. Once you followed them, the whole graphics part runs on the Intel card. Once you want to play a game or do some other heavy graphics card work you call your application like this:
optirun wine /path/to/game.exe
Notice how optirun tells the system to use the nvidia card. It will take a second or two to start it (specifically, enable the card, start another X screen and launch the application on it transparently). Follow the instructions in the Wiki if you have any problems.
If you don't have an Optimus card (just NVIDIA, no Intel), then don't follow any Optimus instructions, just usual NVIDIA stuff from the Wiki. -
No start up & ugly tone sound & flickering front light!!
hello,
thanks for reading my topic question.
I have a question about my iBook's recent problems; they seem solved but little signes show I am heading for the same "crash"??
Under OS X10.3.3 (original from first buy July 2004) my iBook developed problems:
-suddenly quitting applications, at first the same ones repeatingly, later random as it seemed, Mail, Safari, iPhoto, but in the end also Dreamweaver.
-not starting up applications: showing them in the dock, but the menu's wouldn't work
-certain applications such as Toast totally vanished from the iBook. Nowhere to be found!!
-the documents folder wouldn't open: it would jam the whole computer. I don't know how many times I had to restart the iBook.. or how long I waited hoping it would finally find it's way. It seems the files in the Document folder were only accessible when displaying icons. No other folder had these kind of problems.
- it needed reinstallment of the original cd 3 times, to get Mail back on track. But after 3 times it had no more effect. Apllications as Mail and Safari wouldn't start anymore. Finally Dreamweaver wouldn't start anymore either. And the documents file never got better after the reinstallments.
-All in all, about two months of growing trouble. I use the iBook everyday.
I starting backing up all my files.
- in 2 months time I had 2 crashes (the black screen with sqaure in the middle, jaoanes/chinese characters....requiring a restart. I believe this =has a name and is very bad, but I can't remember the name.
Help was on the way; my familypack share Tiger 10.4 all the way from Holland to Greece.. on a dvd. As we (me and my Mac using family) thought the old system was just worn out..
All my files, everything saved on back up cd's. this was a slow and difficult process as the cd's would often not be recognized after a certain period of time (while filling it) so that I couldn't burn it. I had to start over again many times. (to have it recognized I needed to exit and reload). And in the meantime my Toast version had vanished.
-Then ready for Tiger. Erase and install....
all went well, succesfully installed, so...restart.
Seemed fine at first, but the start up never got past the white screen with the rotate gear below the Apple. I could wait a decade.. it didn't go any further.
-tried several keyoptions and restarting. no result.
-The iBook was producing a strange sound like a tone from the telephone and after this weird sound like two seconds it would flicker the little round light in the front of the iBook for one second. After that the start up would preceed untill the white screen with apple.
In all forums I couldn't find anyone with this similar detail<<<<<</div>
-ALL the tricks in the book were tried to find out what was wrong. The iBook was actually reporting to be fine!
-it reported it couldn't get passed the login window. But this was an "erase and install" new system... why the login window?? It wasn't really erasing?
- it wouldn't start up from the original install cd anymore. So that was it. Stuck. Disaster of course.
Anyway, after searching for the Apple doctors here in Greece and thankfully being able to show the original invoice, the iBook went to Athens.
In Athens they concluded the iBook needed a new Hard Disk. I decided for 80GB instead of the 60GB it originally came with.
It's working.
Though, Mail has already quit once. Safari has already quit once, One resart gave me the same sound and flickering light as before, the software update keeps quitting whatever I do.
Does anybody know what is really wrong with my iBook?? I can't imagine a new hard disk within another 2 months is going to be the solution.
the iBook is now running under tiger 10.4.
I tried updating this to 10.4.6 which has not succeeded as yet. (i have added this software update problem to another topic on this forum).
I feel like I'm handeling a time bomb. I never expected this from my Mac.
Maybe someone recognizes anything. Or knows what is exactly going on.
the iBook is a precious tool for me and the only computer that I have. If you would know how few mac's there are in Greece...
Doing without my Mac for one month! and having to work on windows pc's.....if I can find one with software on it. This is Greek drama!
Thanks to all you very smart Mac friends,
Miki.
iBook G4 Mac OS X (10.4) 1,2 GHz / 768 MB DDR SDRAM / new HD:74.53 GB ToshibaSorry for your problem,
but glad to hear of a similar case.
Although it seems it did'nt occure exactly the same way it does sound very similar.
Indeed it seems not be a software problem as reinstallment of my 10.3.3. at the time didn't help much when little problems where already occuring.
In my case I was also unable to start from the original install cd after it eventually chrashed. I couldn't eject it the normal way either.
I also reset the PMU and the PRAM with no result for starting up. My screen turned white though, so just 1 step further.
The diagnose was the HDfailure.
And after having it repaired, a new one put in, it seems to be working okay. Because of the time consuming procedures I was without mac for more than a month. (The repair here in Greece was 160 euro's for the HD, 62 for the technician, and a total of 23 euro for the courier to bring to and take it from Athens).
I didn't know of any software before (and probably) couldn't have used it anyway as there was no other mac to find in miles around/___sbsstatic___/migration-images/migration-img-not-avail.png) to try and fix the Hard Disk. Through Apple Discussions I found something that might be of use for you:
http://www.alsoft.com/DiskWarrior/index.html.
Disk Warrior is said to be the best in fixing hard disks. you can check with the search option to find out more what others have said or go to the site.
I'm certainly getting my copy, I'd rather be prepared for a next time.. of course no guarantee that it will actually work, but you can give it a go.
Still I am very concerned as the noisy and lighty start up DID happen again/___sbsstatic___/migration-images/migration-img-not-avail.png/___sbsstatic ___/migration-images/migration-img-not-avail.png
1 time when the computer required a restart.
I had only just received it back.
Maybe another experience can confirm what's actually causing this.
Good luck/___sbsstatic___/migration-images/migration-img-not-avail.png please let me know how it works out?
Miki -
400 (or maybe 500) Mhz Titanium won't start.
I've adopted an old friend's Ti (of unknown configuration/OS) to see if I can get it to run. (He said he hasn't used it for over a year...but the last time he did use it, it started without a problem.)
I've read all (most) of the discussions about non-starts.
Questions:
1. Can I safely use my 65W 1 GHz Titanium power adapter to start the dead Ti?
2. Can I safely use my 1 GHz Titanium main battery in the dead Ti?
3. Does the 400/500 MHz Ti power adapter have a light on the plug that is supposed to go on (like the newer Ti's)?
At this juncture...I don't know whether the problem is A) the Power Adapter; B) the main battery, and/or; C. the PRAM battery.
(I'm trying the AC Power adapter for 48 hours with the main battery removed solution.)
Last, but unrelated, question: Will the 133 MHz DRAM work in the older (100 MHZ DRAM) Ti? I have 500 MBytes of newer Ti memory sitting here unused (I upgraded the 1GHz Ti to 1 GByte of DRAM).
Thanks.....Hi, John. Yes, you can use the 1GHz Tbook's battery and AC adapter safely with the slower Tibook — they'll work fine. And yes, the old AC adapter is supposed to have a ringlight on its plug. If the adapter works and the light comes on when you connect that adapter to a different Powerbook, the DC-In board in the old PB is faulty and needs to be replaced. If the light doesn't come on with another Powerbook either, the adapter may be faulty. Use the 65W adapter to charge the old Tibook's batteries, then test the older adapter with the machine it belongs to. It's possible that the 45W adapter's light won't come on when it's being used with a Powerbook that expects a 65W adapter — I'm not sure about that.
Assuming that isn't the problem, your internal backup battery is undoubtedly dead after so long. That alone would prevent the Tibook from starting, and recharging it may solve your problem. It won't take 48 hours to do so without any main battery in place; 4-6 hours should do the trick.
PC133 RAM that worked in the 1GHz Tibook should also work fine in the older one. It will operate at PC100 speed. -
DRAM wound too tight??????? Neo 865PE Board Advice needed
RapidShare Account-ID: 14334524
Password: QfYkRMdt
First - My computer is normally rock solid with no problems.
I turned my computer on today and it would not even boot to the BIOS.
It was if there was no power going into it but then it started to boot for about 1 second
then died. I tried again and the same thing kept happening.
I opened it up, checked the Main Board, reseated the graphics card and power cables.
This time it booted but before the bios kicked in it gave the following message:
'DRAM is wound too tight'.
I have not changed anything in the BIOS as I would not know what to change but
it then booted to the BIOS and under the power settings it says the following:
Dynamic Over Clocking = Private
Performance Mode = Slow
CPU Ratio Selection = Locked
DRAM Frequency = Auto
Spread Spectrum = Disabled
Adjust CPU Bus Clock(mhz) = 200
DDR Clock (mhz) = 333
Adjust AGP/PCI Clock (mhz) = 66.66/33.33
CPU VCORE Adjust = No
DDR Power Voltage = 2.50v
?GP Power Voltage = 1.50v
If anyone can make any suggestions I would be most appreciative as I cannot
afford to loose my computer or any data that is on it.
I'm worried that the Main Board maybe failing or maybe the RAM or PSU?
In case it matters this is what is in my system.
MSI Neo 865PE Board
AMIBIOS V3.31a
2 matched pairs of Kingston HyperX RAM KHX2700K2/1G
Intel P4 3Ghz CPU
Intel ICH5R SSATA
Port 1 = Crucial Solid State Drive (Main OS Drive)
Port 2 = Lite-On SATA CD-RW
IDE Port 1 = 300GB Samsung HD
Promise SATA
Port 1 = WD Caviar Green 1.5TB HD
Port 2 = WD Raptor 150GB HD
IDE Port = Sony CD-RW
Power Supply = Q-Tec 550 Watt Dual Fan Gold
USB Mouse/Keyboard
All housed in a 19" Rack Mount Server case.
Thanks in advance.thanks for the replys everyone.
I take it then that my problem is the PSU?
I am shocked that you rate the Q-Tec one so badly, it is the one that was supplied
with my computer and has worked with out a problem for about 3 years or so now.
I cant take a chance with it so its going in the bin.
Having done some checking I have located a trusted stockest who has
Corsair VX 550W ATX Power Supply (CMPSU-550VXUK) [CMPSU-550VXUK]
or
Corsair TX 650W ATX SLi Compliant Power Supply (CMPSU-650TXUK) [CMPSU-650TXUK]
for just ubder £80 in the UK.
Are either of these any good and is one better for me than the other considering what
main board I have. Also the new CPU has got to fit in my computer case so its physical size must match the old one.
I am not a modder so this is all a bit alien to me so any tips or hints much appreciated.
Thanks again
Kenny -
Issue Logic 9 Crashing when new project is started
i have been having this drama with logic 9 over last few days first it was my mac pro playing up now logic,
whenever i start up logic everything works fine then when i go to new project, one of my templates or open any project it freezes , what it specifically does is when i got to the finder at top the rainbow pin wheel pops up and it just keeps spinning until i am forced to "force quit"
included is a log of what happened when it crashed last
http://www.speedyshare.com/files/23872264/logiceffor_report_19082010.rtf
PS i am using a OSX 10.5.8 / Macpro Intel Xeon 2.66 Quadcore late 08 model
any help would be appreciatedyes i am using latest version of logic with Project mix i/o and novation remote keyboard (something in my head was telling me that auto map might of done this but after i uninstalled still had dramas)
every this looks ok until i got the finder then the rainbow pin wheel of death pops up and will not go away until i force quit , even bloody cubase seems to be working right -
I am using the NI PCIe-1473R Framegrabber on Labview 2010 SP1. I would like to do some image processing on the FPGA. I started off with the 10-Tap 8-Bit Camera with DRAM example. I am trying to replace the DRAM FIFO with DRAM circular buffer. I need to be able to address different parts of the image, not simply stream the image, so I can't use it as a FIFO. I created a control that is a cluster with 2 U64 elements to be able to interface with the Pack80To256 CLIP. I changed the properties of the FPGA to access the DRAM banks through Labview FPGA Memories, then added 2 memories (one for each bank) using the 128-bit control described earlier. If I do not connect anything to the output of the DRAM (Memory Retrieve Data function, Data output), the VI builds fine. However, when I connect anything such as an indicator I get an error during compilation.
ERROR: Place:836 - Not enough free sites available for the components of the
following type(s).
BLOCKRAM Number of Components 104 Number of Sites 96
Although the symptoms are not exactly the same, they are similar, so I tried using the patch here http://digital.ni.com/public.nsf/allkb/8A46A432EA47D261862577B300779F41 and the one here http://digital.ni.com/public.nsf/allkb/BBD7A87F2ADC2028862577FB005F6B19
But I get the same error.
I am not in front of the development computer right now; I will add the VI and anything else that may be useful to debug this.Hi elsayed03,
I'm sorry you didn't find my response in my post or our conversation on the phone yesterday as informative as I meant for it to be. Let me try to be more clear.
In the VI that you are working with, you appear to be monitoring the data stored in your DRAM banks. The DRAM is a large memory location that can store a significant amount of data in it. If this memory was stored on the FPGA fabric (logic gates), it could take up a considerable amount of space and significantly limit what else could be done on the FPGA. This is the reason that the DRAM is used. Because you have an indicator attached to the DRAM bank, the FPGA fabric is being forced to store a copy of this value as well. In short, you are using the DRAM bank to store the data, then after reading it, storing it again in the logic gates. Additionally, DRAM is a destructive read type of memory, so once you've read the value through the logic gates, the DRAM is destroyed. So in effective, by adding an indicator, you are using DRAM as a transport medium from the FPGA to the FPGA with single read capabilities, which is probably not what you were looking to do. A FIFO would be better suited for this type of data handling.
The two clusters that you are pulling out of DRAM are clusters of unsigned quad numbers. This data type is fairly large in terms of memory usage and is avoided in most instances on FPGAs. However, since it appears that this is the format that the data type you are working with, it appears that you are limited to using this data type. As a rule, you will typically want to use fixed-point number to limit resource usage. Since you can't in this instance, the best way to minimize the effect of using this data type is to avoid displaying these values on the front panel as this uses additional resources on your FPGA. You correctly found this written in the KnowledgeBase you linked in your last post. Performing manipulation of the data from the DRAM will not require the same resources as creating front panel objects for that same data, and that is why you can manipulate the data and compile as long as you do not display this data using an indicator. I apologize if I was not clear in our first interactions. In short, the fewer objects you have on your front panel, including the front panels of SubVIs the less blockram you will be utilizing.
My suggestion regarding using a larger FPGA in my previous response was in response to what seemed to be a need to display the data set to a front panel object. I assumed you were going to use a Read/Write Method perhaps to post to a Host vi. If that was the case, using a Target to Host FIFO might be a better way to forward this information back to the host. Either way, you are limited by the available resources on the FPGA to do this sort of communication.
If you have additional questions, don't hesitate to let us know and we will be glad to help. There are limitations to the physical resources on an FPGA that can't be worked around, and depending on your requirements, you may be limited in what you can do with a specific piece of hardware. If we can help you more, let us know.
Ben N.
Applications Engineering
Certified LabVIEW Developer -
Occasionally when I am viewing a DVD or listening to music with Windows Media Player and I do something else, the computer shuts down. If I turn it on immediately, it won't work. Give it about 20 minutes, and the BIOS screen will pop up. It will say DRAM loaded too tightly and ask me to press a key. The last two times my system shut off, I haven't gotten that message. Is it the same problem and what do I do to correct it?
Specs:
MSI NEO 2 PFISR 865PE
1 GB DDR RAM
Radeon 9800 Pro
DMI Browser wrote this out, if anyone wants to analyze it:
- ** DMI Information ** -
***************BIOS INFORMATION < TYPE0 >***************
Length : 14h
Handle : 0h
Vendor Name : American Megatrends Inc.
BIOS Version : V3.A
BIOS Build Date : 09/29/2004
BIOS starting Address Segment : f000h
BIOS starting Address Segment : 512 K
BIOS Characteristics : (6fcbde90h)
ISA is supported : Yes
MCA is supported : No
EISA is supported: No
PCI is supported : Yes
PCMCIA is supported : No
Plug and Play is supported : Yes
APM is supported : Yes
BIOS is Upgradeable (FLASH) : Yes
BIOS shadowing is allowed : Yes
VL-VESA is supported : No
ESCD supported is available : Yes
Boot from CD is supported : Yes
Selectable Boot is supported : Yes
BIOS ROM is socketed : Yes
Boot From PCMCIA is supported : No
EDD specification is supported : Yes
for NEC 9800 1.2MB 3.5" : No
for Toshiba 1.2mb 3.5" : No
5.25"/360 KB Floppy supported : Yes
5.25"/1.2 MB Floppy supported : Yes
3.5"/720 KB Floppy supported : Yes
3.5"/2.88 MB Floppy supported : Yes
Print Screen is supported : Yes
8042 Keyboard are supported : Yes
Serial Services are supported : No
Printer Services are supported : Yes
CGA video Services are supported : Yes
PC-98 : No
ACPI supported : Yes
USB Legacy is supported : Yes
AGP is supported : Yes
I2O boot is supported : No
LS-120 boot is supported : Yes
ATAPI ZIP Drive boot is supported : Yes
1394 boot is supported : No
Smart Battery supported : No
***************SYSTEM INFORMATION < TYPE1 >***************
Length : 19h
Handle : 1h
Manufacturer Name : MICRO-STAR INC.
Product Name : MS-6728
Version : 2.00
Serial Number : 00000000
UUID : 0000000000000000h
Wake-up Type : ( 04h ) Modem Ring
***************BASE BOARD INFORMATION < TYPE2 >***************
Length : 8h
Handle : 2h
Manufacturer Name : MICRO-STAR INC.
Product Name : MS-6728
Version : 2.00
Serial Number : 00000000
***************SYSTEM ENCLOSURE OR CHASSIS < TYPE3 >***************
Length : 11h
Handle : 3h
Manufacturer Name : Uknown Chassis Manufacture
Type : ( 03h ) Desktop
Version : Version 1.00
Serial Number : 123456890
Asset Tag Number : 0123ABC
Bootup State : ( 02h ) Unknown
Power Supply State : ( 02h ) Unknown
Thermal State : ( 02h ) Unknown
Security Status : ( 02h ) Unknown
***************PROCESSOR INFORMATION < TYPE4 >***************
Length : 20h
Handle : 4h
Socket Designation : FC-478
Processor Type : ( 03h ) Central Processor
Processor Family : ( 01h ) Other
Processor Manufacturer : Intel
Processor ID : 0060f34h bfebfbffh
Processor Version : Intel(R) Pentium(R) 4 Processor
Voltage : ( 06h ) unknow
External Clock : ( 00c8h ) 200 MHz
Max Speed : ( 0fa0h ) 4000 MHz
Current Speed : ( 0c80h ) 3200 MHz
Status : ( 41h ) CPU Socket Populated , CPU Enabled
Processor Upgrade : ( 0fh ) Unknown
L1 Cache Handle :0005h
L2 Cache Handle :0006h
L3 Cache Handle :Processor has no L3 cache
***************CACHE INFORMATION < TYPE7 >***************
Length : 13h
Handle : 5h
Socket Designation : Internal Cache
( 0180h ) Cache Configuration :
Cache Level : L1 Cache
Cache Socketed : Not Socketed
Location, relative to the CPU module : Internal
Cache Memory : Enabled
Operational Mode : Write Through
Maximum Cache Size : ( 8010h ) 1024 K
Installed Size : ( 0030h ) 48 K
Supported SRAM Type : ( 0020h ) Synchronous Type
Current SRAM Type : ( 0030h ) Pipeline Burst Type Synchronous Type
Cache Speed : Unknow
Error Correction : Parity
System Cache : Data
Associativity : 4-Way
***************CACHE INFORMATION < TYPE7 >***************
Length : 13h
Handle : 6h
Socket Designation : Internal Cache
( 0181h ) Cache Configuration :
Cache Level : L2 Cache
Cache Socketed : Not Socketed
Location, relative to the CPU module : Internal
Cache Memory : Enabled
Operational Mode : Write Through
Maximum Cache Size : ( 8010h ) 1024 K
Installed Size : ( 8010h ) 1024 K
Supported SRAM Type : ( 0020h ) Synchronous Type
Current SRAM Type : ( 0020h ) Synchronous Type
Cache Speed : Unknow
Error Correction : Parity
System Cache : Unified
Associativity :
***************MEMORY CONTROLLER INFORMATION < TYPE5 >***************
Length : 18h
Handle : 7h
Error Detecting Method : ( 03h ) None
Error Correcting Capability : ( 00h )
Supported Interleave : ( 03h ) One Way Interleave
Current Interleave : ( 03h ) One Way Interleave
Maximum Memory Module Size : ( 0ah ) 1024MB
Supported Speeds : ( 0001h )
Supported Memory Types : ( 0001h ) DIMM SDRAM
Memory Module Voltage : ( 02h ) 3.3V Supported
Number of Associated Memory Slots : 04h
Memory Module Configuration Handle : 0008h 0009h 000ah 000bh
Enabled Error Correcting Capabilities : Other
***************MEMORY MODULE INFORMATION < TYPE6 >***************
Length : 0ch
Handle : 8h
Socket Designation : DIMM1
Bank Connections : ( 10h ) RAS# 1 , RAS# 0
Current Speed : ( 00h ) 0 ns
Current Memory Type : ( 0500h ) DIMM SDRAM
Installed Size : ( 89h ) , Double Bank
Enabled Size : ( 89h )
Error Status : ( 00h ) Uncorectable errors:None , Corectable errors:None , From the event log:None
***************MEMORY MODULE INFORMATION < TYPE6 >***************
Length : 0ch
Handle : 9h
Socket Designation : DIMM2
Bank Connections : ( 32h ) RAS# 3 , RAS# 2
Current Speed : ( 00h ) 0 ns
Current Memory Type : ( 0500h ) DIMM SDRAM
Installed Size : ( 89h ) , Double Bank
Enabled Size : ( 89h )
Error Status : ( 00h ) Uncorectable errors:None , Corectable errors:None , From the event log:None
***************MEMORY MODULE INFORMATION < TYPE6 >***************
Length : 0ch
Handle : 0ah
Socket Designation : DIMM3
Bank Connections : ( 54h ) RAS# 5 , RAS# 4
Current Speed : ( 00h ) 0 ns
Current Memory Type : ( 0002h )
Installed Size : ( 7fh ) Module not installed , Single Bank
Enabled Size : ( 7fh ) Module not installed
Error Status : ( 00h ) Uncorectable errors:None , Corectable errors:None , From the event log:None
***************MEMORY MODULE INFORMATION < TYPE6 >***************
Length : 0ch
Handle : 0bh
Socket Designation : DMII4
Bank Connections : ( 76h ) RAS# 7 , RAS# 6
Current Speed : ( 00h ) 0 ns
Current Memory Type : ( 0002h )
Installed Size : ( 7fh ) Module not installed , Single Bank
Enabled Size : ( 7fh ) Module not installed
Error Status : ( 00h ) Uncorectable errors:None , Corectable errors:None , From the event log:None
***************SYSTEM SLOTS < TYPE9 >***************
Length : 0dh
Handle : 0ch
Slot Designation : PCI1
Slot Type : ( 06h ) PCI
Slot Data Bus Width : ( 05h ) 32 bit
Current Usage : ( 03h ) Available
Slot Length : ( 04h ) Full Length
Slot ID : 0001h
Slot Characteristics1 : ( 0ch )
Slot Characteristics2 :PCI Power Management Enable
***************SYSTEM SLOTS < TYPE9 >***************
Length : 0dh
Handle : 0dh
Slot Designation : PCI2
Slot Type : ( 06h ) PCI
Slot Data Bus Width : ( 05h ) 32 bit
Current Usage : ( 04h ) In use
Slot Length : ( 04h ) Full Length
Slot ID : 0002h
Slot Characteristics1 : ( 0ch )
Slot Characteristics2 :PCI Power Management Enable
***************SYSTEM SLOTS < TYPE9 >***************
Length : 0dh
Handle : 0eh
Slot Designation : PCI3
Slot Type : ( 06h ) PCI
Slot Data Bus Width : ( 05h ) 32 bit
Current Usage : ( 03h ) Available
Slot Length : ( 04h ) Full Length
Slot ID : 0003h
Slot Characteristics1 : ( 0ch )
Slot Characteristics2 :PCI Power Management Enable
***************SYSTEM SLOTS < TYPE9 >***************
Length : 0dh
Handle : 0fh
Slot Designation : PCI4
Slot Type : ( 06h ) PCI
Slot Data Bus Width : ( 05h ) 32 bit
Current Usage : ( 03h ) Available
Slot Length : ( 04h ) Full Length
Slot ID : 0004h
Slot Characteristics1 : ( 0ch )
Slot Characteristics2 :PCI Power Management Enable
***************SYSTEM SLOTS < TYPE9 >***************
Length : 0dh
Handle : 10h
Slot Designation : PCI5
Slot Type : ( 06h ) PCI
Slot Data Bus Width : ( 05h ) 32 bit
Current Usage : ( 03h ) Available
Slot Length : ( 04h ) Full Length
Slot ID : 0005h
Slot Characteristics1 : ( 0ch )
Slot Characteristics2 :PCI Power Management Enable
***************SYSTEM SLOTS < TYPE9 >***************
Length : 0dh
Handle : 11h
Slot Designation : AGP
Slot Type : ( 06h ) PCI
Slot Data Bus Width : ( 05h ) 32 bit
Current Usage : ( 03h ) Available
Slot Length : ( 04h ) Full Length
Slot ID : 0004h
Slot Characteristics1 : ( 0ch )
Slot Characteristics2 :PCI Power Management Enable
***************OEM STRINGS < TYPE11 >***************
Length : 5h
Handle : 12h
Count : ( 02h )
***************PORT CONNECTOR INFORMATION < TYPE8 >***************
Length : 9h
Handle : 13h
Internal Reference Designator : USB
Internal Connector Type : ( 02h ) Mini Centronics
External Reference Designator : Def
External Connector Type : ( 04h ) DB25 pin male
Port Type : ( 0fh ) SSA SCSI
***************PORT CONNECTOR INFORMATION < TYPE8 >***************
Length : 9h
Handle : 14h
Internal Reference Designator : IEEE1394
Internal Connector Type : ( 08h ) DB-9 pin male
External Reference Designator : Sanjoy
External Connector Type : ( 10h ) Infrared
Port Type : ( 0bh ) MIDI Port
***************SYSTEM CONFIGURATION OPTIONS < TYPE12 >***************
Length : 5h
Handle : 15h
Count : ( 02h )Are you setting the DRAM Timings manually or using SPD??
What is your DDR Voltage set to? I know that I had to up mine a bit for stability. 2.65V seems to be the "sweet spot" on this board. I have tried everything from 2.5 to 2.9V and 2.65 seems to be the best all around for stability and performance...
Also check DOT Settings as it may be trying to OC your memory which can cause timing issues if they are set too tight as well as your memory performance settings (i.e. Turbo, Ultra-Turbo) -
Using DW CC... Win 7 : Every time I start DW, I get message telling me to 'switch to" or retry.
Its more of an annoyance than a problem. I'm using Windows 7 Professional on an Intel i7 950 with 16 Gbytes of RAM and a Gforce graphics card with 3072 MBytes of RAM. I'm using the full suite of CC apps.
Every time I start DW I get this error message to "switch to" or retry before it will start. It's got something to do with a browser (I've got 3) but only Chrome has any Adobe related add ons. I recall some time many years ago I got the same message starting Corel Draw or Photo Paint. Come to think of it, that was the reason I moved to Adobe in the first place.
Any help will be gratefully accepted.Well... Yes and no to fixing it.
I followed that link's instruction — altered for Dreamweaver and yes, it lit up cleanly as administrator but before ever it reached 'booted' stage it warned me I had 00 days of trial left and needed I to register it. OK I'm a paid up renter. I fed it my username and it finished booting only to tell me again, I had 00 days of trial left and needed to register it. I knew where this was leading before ever I entered my email and password for the second time but let it happen anyway.
Then I decided I'd continue with the instructions, log out of DW and re-start it normally. Opps! This application has already been registered on two other machines. CC Manager at it again. Another hour wasted fixing CC dramas. I rebooted the PC without any external drives connected, just the 4 internal drives. OK... Lets start DW and see what happens. I'll tell you firstly that I installed DW on this machine 6 months ago and promptly removed it. Why? Because I get quicker results using notepad++ and I needed to get a job done in a hurry. No time to try and get my head around Dreamweaver in the process.
Honestly speaking I didn't 'cancel' that installation. I didn't realize this antique process still existed. Anyway... I reinstalled it last month with some time now to 'get my head around it'. CC doesn't speak my language and hasn't yet learned that when you tell it to remove a program, it needs to remove the registration of it too! So I got the 00 days trial left garbage again. Only difference this time it told me both the original install and second install (on the same machine) were still registered but luckily (I won't say for who) There was an option to cancel all other installations. and yes... It loaded cleanly and faster than I can recall it ever had previously. Will it keep doing this? Is this mess going to happen ever few months?
I'm prepared to believe CC's shocking uninstall is to blame. At the best of times it is a messy process, leaving registry entries and files scattered all over my drives. NOT very nice for such a complex program manager. I used to be able to keep it under control with Revo but now CC manager wants to do it all I think it needs a bib or diaper to stop messing up my computer. If this happens again now that I've killed (renamed actually) the folders in the instructions to fix lightroom doing the same thing... I'll lodge a critical error ticket.
Incidentally... How come searching for this solution didn't show up the answer you pointed me to? Is the forum search bot flaky too?
Maybe you are looking for
-
Vendor / Customer Master transfer from Feeder to GTS
Hi All, When I transfer a Vendor / Customer / Bank Key from Feeder system to GTS, the Business partner is created with BP Role "000000 - BP General". But what I need is whenever I transfer a Vendor the BP should be created with BP Role "SLLCPS" & For
-
How do I add a 2nd Photo field
I am using ID CS 6 on a Mac. I have created a INDD file with fileds to import date for a directory. I have one photo field but would not like to create another photo fiedl for photos2 in the CSV database. See this screen shot:
-
Add rows to a tabular form (v1.6)
I have 2 tabular forms on a single page (It started as a master and detail with detail). The second add button which is adding empty rows at the end of the report region keeps adding the empty rows to the first tabular report. I don't see a setting t
-
Instant Client RPMs fail to "provide"
The instantclient rpms have a fairly slim list of things that they provide: rpm -qa | grep oracle-instantclient | xargs rpm -q --providesoracle-instantclient-jdbc = 10.1.0.3-1 oracle-instantclient-basic = 10.1.0.3-1 oracle-instantclient-devel = 10.1.
-
I am looking to make a TSQL statement that I can use to search for a particular string in a field and then then change it. I know the columns/fields that I need to search. Basically I have a 2 columns that store a full directory path including the