START UP ERROR; Please upgrade your video display drivers.

I recently updated to the latest version of Premiere Pro CC (2014) and when I opened it I got the message about updating the video drivers as it could not find any capable play modules.
I have looked everywhere on how to update the drivers but have found nothing when it comes to Mac OSX.
Please can anyone help?
I am running;
Processor: Intel Xeon
Graphics: ATI Radeon HD 5770
OS X 10.9.3

Hi Lukeknwls,
Try this: Go to the following locations and rename the folder to: "old_folder name".
User/user library/Application Support and rename the Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and go to Adobe/Premiere pro/8.0 and rename the 8.0 folder
This has solved this issue for other users.
Thanks,
Kevin

Similar Messages

Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.

I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again" when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
Anyone?
Thanks

Hi Stan.
I had the same problem as you did though I am using Adobe CC. I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version.
Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup ) first and updated my NVidea card to no avail. Eventually what did the trick was this...
After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it. Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again. I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care. That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
Let me know if this works.
Cheers and good luck

Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message : "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
PLEASE HELP!

Hi Delarey,
Please go to the following location and rename the folder to old_folder name
User/user library/Application Support and rename Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
Make sure that you are in user library if you are not sure check the link below.
Access hidden user library files | Mac OS 10.7 and later
Regards,
Vinay

"Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers." What does this mean? Need help urgently!

Premier Pro CC will not open, even though all my computer software is updated. It comes up with the message every time I try and open it. "Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers and start again." What does this mean? I have been searching the internet for an answer for hours. Urgent help needed.

Error "Premiere Pro could not find any capable video play modules" | Startup

Video Display Drivers

I own an older model laptop - Dell Vostro 1700. When I upgraded to Windows 8.1 from my true and trusted XP platform, I also upgraded from 32 bit to 64 bit. Today, when I tried to launch my Adobe Premiere Pro, I got the following error message:
Adobe Premiere Pro could not find any capable video play modules
Please update your video display drivers and start again
A cursory look through the Dell support site shows that there are no 64 bit drivers for the Vostro 1700, nor any that are really designed for Windows 8.1. Can anyone help me so I can start using this amazing piece of software (yes, I did complete the tutorial)?
Thank you in advance,
otw

otweilhmayr
What version of Premiere Pro do you have on your Windows 8.1 64 bit? What video card does your computer have?
Put those answers on hold until you get to the Premiere Pro Forum where Premiere Pro users can give you some insights on the matter from the Premiere Pro perspective.
We are Premiere Elements users here.
You have posted in the wrong forum. You have posted in the Premiere Elements Forum. Since you have some version of Premiere Pro, please repost in the Adobe Premiere Pro Forum.
http://forums.adobe.com/community/premiere
or a moderator will be by to move your thread from here to there for you.
Thanks.
ATR

Error "Could not open [filename]...Please upgrade your plug-ins

A collegue send us an CS4 InDesign file and when I opened, it says this:
Error "Could not open [filename]. Please upgrade your plug-ins to their latest versions or upgrade to the latest of Adobe InDesign."
Any suggestion? I also have CS4 installed.

I see. Thanks for the help. I just confirmed with the sender of this file and it seems that she has CS5 installed. So, I can that you're right that it's a CS5 file.
Thanks, again.

Cannot open indd file in CS5.5? "Please upgrade your plugins to the latest version or upgrade..."

I refer to a similar forum post here - http://forums.adobe.com/message/4081971 - which outlines a similar problem with opening a file.
The difference is the file I can no longer open was created using Adobe indd CS5.5 and I am opening it with Adobe indd CS5.5. I have never had this issue previously. The only change is to a new OS on Mac - Version 10.8.2. Error message says "Cannot open "File name" please upgrade your plugins to the latest version or update to the latest version of Adobe" - I know there is CS6 but why should I now need to upgrade suddenly?
Can anyone help here? I can forward a link to the file in question if needs be.
Cheers,
Catie

@Catie – did you verify, if your InDesign file is saved in version CS5.5?
You could do so by using a ExtendScript (Adobe's version of JavaScript) written by Jongware.
Here is the full story of "IDentify.jsx":[Ann] Identify Your InDesign File
http://forums.adobe.com/message/4071273#4071273
If the problem is due to a corruption of plug-in version information, I fear you have no chance other than:
1. Update CS5.5 to the latest bug-fix version => 7.5.3
2. Download a trial version of InDesign CS6, open and export the file to IDML and re-open it in InDesign CS5.5 (though this might not work for a corrupted file)
3. Try to open the file on a different machine
Are there 3rd party plug-ins involved? If so contact their makers…
Uwe

Cannot open file "Please upgrade your plug-ins" message

I'm trying to open a CS3 InDesign file and all I get is this error message:
"cannot open "filename". Please upgrade your plug-ins to their latest version, or upgrade to the latest version of Indesign. " followed by a long, long, list of plug-ins.
I'm using InDesign CS3 5.0.4.682 on OSX 10.4.11

Indeed. It uses the same .indd extension as all the InDesign releases. Since you don't have CS4, the Finder thinks it is a CS3 document. But it isn't.
Dave

Can't open CS3 File - Please upgrade your plug-ins to their latest versions

I created a number of files many months ago with the same version of CS3 (3.01) that I have now on a Windows XP OS. I have not changed it in any way.
Now, when attrmpting to open one of the files I receive the following error message: Please upgrade your plug-ins to their latest versions or upgrade to the latest version of InDesign
I've searched the forum and found no postings by someone who cannot open files created by their own InDesign.
Your help would be appreciated.

Are you certain it's the same version? You'd need to have purchased new media for the PC.
What Bob has said is entirely accurate. Do you still have the Mac? I'm not sure exactly how to find the version on Mac, but I suspect that "get info" will return at least a version, if not the build. On the PC you can open ID and click the Help menu, then hold down the Ctrl key and click "About InDesign" to get a full information dialog.
If you can't confirm your version on the Mac, send me a private message and I'll give you an address where you can send one of the files as an attachment and I'll confirm the version for you.
Peter

Could not start printer. Please check your printer configuration??

I am getting the following message when I try to print from my HP Photosmart 2610: "Could not start printer. Please check your printer configuration"
I am connected via a usb port and use windows Vista. Any suggestions on what to do. I have tried to uninstall and reinstall drivers and delete the printer and readd it. It did not help

Hi SCheyne,
Welcome to the HP Forums.
I see that you are having some issues when attempting to print from your computer.
I do have a few steps that we can take to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also found a document that deals with the 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows Vista.
If you are still having issues or if you have any additional questions, please feel free to write me back.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Sorry, your Story Free subscription does not allow access to this application. Please upgrade your s

I started using Story a few months ago. While writing a script (very proud of it's potential) I was past page 20 I believe, to my own demise I only backed it up around page 9 using a word document. My Hard Drive died and had to be replaced. While trying to save all my files before I took it to the apple store I went to grab my adobe story file and couldnt. So, I tried to log in and got this "Sorry, your Story Free subscription does not allow access to this application. Please upgrade your subscription." I went to the online-version and my story was not there. Thus, I am very angry that I lost my script because out of the blue my subscription no longer allowed me to use Adobe Story on my Macbook Pro.
Nevertheless, I have been unsuccessfully trying to re-open Adobe Story on my newly restored HD and I still get the same message.
If you could help me with what needs to be done, that would be swell.
Thanks.

Yup I was working on my script on Adobe Story, without problems, I was
unable to retrieve the file to save it. My Hard Drive has since been
erased and now I am working on a new HD.
I did re-install CS6. All my other Adobe programs work. The online
version of Story seems to work but every time I sign in using my Adobe ID
it gives me that message. :/ The thing is I never had a subscription so im
quite confused why it's telling me my subscription no longer allows me to
use Story without upgrading and spending oodles of money.
Thanks!
Harriett McFarlane

Tried to setup ePrint on printer and received Register Error, Please Upgrade Product

I was trying to setup the ePrint web service on a HP Photosmart Plus e-All-in-One B210a and whenever i tried to set it up on the printer I would receive "Register Error - Please upgrade product". I would also try to get the printer to update through the web interface and I wasn't having any luck. I'm wondering what I can do to get the printer to either update itself and get the ePrint enabled or if I can do it from the HP website?
Thank You,
Trevor Bensen

I hope you are doing well and sorry to learn you are having this issue
Can you share what is the complete printer model as well as this;
Operating System (including service pack revision)
Connection Method - USB, Hardwired LAN, Wireless?
Error messages - on printer screen and/or computer, any blinking light patterns.
I will do my best to help you;
Regards;
RobertoR
And remember . . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

In CS4, "Cannot open file" "Please upgrade your plug-ins..."

Greetings,
I am using InDesign CS4 on a PC. I am trying to open an .indd file created by our marketing department. I don't know what version of InDesign they use nor whether they work on Macs or PCs.
When I double-click to open the file, I get a "Cannot Open File" popup box. The box reads "Cannot open docname.indd. Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign." It then lists 18 different plugins:
ASSIGNMENTS.RPLN
TEXT.RPLN
SPREAD.RPLN
MASTER PAGE.RPLN
TEXT ATTRIBUTES.RPLN
.... and 13 more.
When I go to Help > Configure Plug-Ins, I can see that I do have all of these plug-ins. But apparently they are not the latest versions.
Anyone know how I can update these plugins? I have searched for them on the Adobe website, but no joy.
Thanks in advance.
Jen

It's a safe bet that they are working in CS5. The only way to get those plugins is to install CS5 on your machine.
You could ask your marketing department to export an IDML file from CS5, which you can open up in CS4, but it might fail horribly (and it's guaranteed to lay out incorrectly if they've used any tools in CS5 that aren't in CS4). If you rely on this workflow, by regularly using a document going back and forth between CS5 and CS4, chances are very, very good that it will fail at a critical moment. The only really safe thing to do here is to get everyone using the same version of InDesign.

I have a mac, In"Design CS 5.5, a design gave me a file said it was CS 6, does not open in CS 5.5..Message says "Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign." I think I need to buy upgrade fro

I have a mac, In"Design CS 5.5, a design gave me a file said it was CS 6, does not open in CS 5.5..Message says "Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign." I think I need to buy upgrade from 5.5 to 6. I found one on NextTechDirect for $150 to download. they are not a scam according to "scamadvisor.com."
When I drag the InDesign file that that was supplied by another designer who said it was CS 6 onto my desktop it says CS 5.5. Is that because I only have CS 5.5?
Should I buy this
Adobe InDesign CS6 Upgrade from CS5.5 WIN/MAC [Download] from Next tech....it is obviosly higher on the adobe site and alot of other places?

No one is likely to recommend where you buy your software from other than Adobe in these forums... not so much because of support for Adobe, but mostly because of lack of support/knowledge of any third party vendors. I only know from experience that when you invest in bargain pricing you usually get what you pay for.

How do I make Read and Write 10 Gold work with Firefox? I have the latest Firefox 10.0.1 but it keeps saying "Please upgrade your version of Mozilla Firefox. The minimum version supported by Read&Write is version 3.0."

I just loaded Moxilla Firefox on my Windows 7 PC today and tried to use my Read and Write 10 Gold text help software but it just does not seem to work with this browser (works fine on Internet Explorer) as it keeps saying "Please upgrade your version of Mozilla Firefox.
The minimum version supported by Read&Write is version 3.0." but this versions is higher than 3.0!

We have a solution available for anyone needing to run Firefox 10 with Read&Write v10 Gold, please email us directly for this temporary resolution- [email protected]

START UP ERROR; Please upgrade your video display drivers.

Similar Messages

Maybe you are looking for