Start up from 'suspend to ram' no longer starts wireless

When I finish with my desktop work I usually suspend to ram since it allows for quick startup. After a recent system upgrade, returning from suspend to ram no longer activates the wireless connection. NetworkManager is running in the processes list, but doesn't seem to do anything. I have to turn the computer off completely and then on again to get it to work.
Anyone else experiencing this?

I had the same issue, but on Chakra, did you try systemctl restart NetworkManager? I think that  solves it without a complete reboot.

Similar Messages

  • [SOLVED] Something automatically wakes PC from suspend to RAM

    Hello,
    for the last two days my desktop PC automatically and instantaneously wakes from suspend-to-RAM when I try to put it to sleep. I found https://bbs.archlinux.org/viewtopic.php?id=135543 and tried the script that solved the problem for the OP with no success.
    Some info that might be relevant:
    I have not made any hardware changes to my computer lately;
    The only devices connected to my computer are the display (DVI) my TV (HDMI) and a mouse and keyboard and a router.
    I use the stock Arch kernel and update regularly from a synced mirror in Norway;
    I suspend my computer with
    dbus-send --system --print-reply --dest="org.freedesktop.UPower" \
    /org/freedesktop/UPower org.freedesktop.UPower.Suspend
    All wake-up events like PCIe, mouse and keyboard are disabled in BIOS.
    Does anybody experience these problems lately, or know if this is a known issue//bug?
    Here is an exerpt from dmesg:
    [ 507.682162] ehci_hcd 0000:00:12.2: remove, state 4
    [ 507.682177] usb usb1: USB disconnect, device number 1
    [ 507.682600] ehci_hcd 0000:00:12.2: USB bus 1 deregistered
    [ 507.682668] ehci_hcd 0000:00:12.2: PCI INT B disabled
    [ 507.682847] ehci_hcd 0000:00:13.2: remove, state 4
    [ 507.682858] usb usb2: USB disconnect, device number 1
    [ 507.683206] ehci_hcd 0000:00:13.2: USB bus 2 deregistered
    [ 507.683260] ehci_hcd 0000:00:13.2: PCI INT B disabled
    [ 507.687630] ohci_hcd 0000:00:12.0: remove, state 4
    [ 507.687644] usb usb3: USB disconnect, device number 1
    [ 507.688134] ohci_hcd 0000:00:12.0: USB bus 3 deregistered
    [ 507.688170] ohci_hcd 0000:00:12.0: PCI INT A disabled
    [ 507.688392] ohci_hcd 0000:00:12.1: remove, state 4
    [ 507.688405] usb usb4: USB disconnect, device number 1
    [ 507.688909] ohci_hcd 0000:00:12.1: USB bus 4 deregistered
    [ 507.688936] ohci_hcd 0000:00:12.1: PCI INT A disabled
    [ 507.689078] ohci_hcd 0000:00:13.0: remove, state 4
    [ 507.689087] usb usb5: USB disconnect, device number 1
    [ 507.689524] ohci_hcd 0000:00:13.0: USB bus 5 deregistered
    [ 507.689549] ohci_hcd 0000:00:13.0: PCI INT A disabled
    [ 507.689680] ohci_hcd 0000:00:13.1: remove, state 1
    [ 507.689690] usb usb6: USB disconnect, device number 1
    [ 507.689697] usb 6-2: USB disconnect, device number 2
    [ 507.740528] ohci_hcd 0000:00:13.1: USB bus 6 deregistered
    [ 507.740563] ohci_hcd 0000:00:13.1: PCI INT A disabled
    [ 507.740762] ohci_hcd 0000:00:14.5: remove, state 4
    [ 507.740772] usb usb7: USB disconnect, device number 1
    [ 507.741335] ohci_hcd 0000:00:14.5: USB bus 7 deregistered
    [ 507.776761] ohci_hcd 0000:00:14.5: PCI INT C disabled
    [ 508.174446] PM: Syncing filesystems ... done.
    [ 508.423666] PM: Preparing system for mem sleep
    [ 508.766827] Freezing user space processes ... (elapsed 0.01 seconds) done.
    [ 508.780005] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    [ 508.793339] PM: Entering mem sleep
    [ 508.793357] Suspending console(s) (use no_console_suspend to debug)
    [ 508.793635] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
    [ 508.793679] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [ 508.793696] sd 2:0:0:0: [sdb] Stopping disk
    [ 508.793776] sd 0:0:0:0: [sda] Stopping disk
    [ 508.801620] i8042 aux 00:09: wake-up capability disabled by ACPI
    [ 508.801788] serial 00:08: disabled
    [ 508.801791] serial 00:08: wake-up capability disabled by ACPI
    [ 508.801821] [drm] nouveau 0000:03:00.0: Disabling fbcon acceleration...
    [ 508.801824] [drm] nouveau 0000:03:00.0: Unpinning framebuffer(s)...
    [ 508.801851] [drm] nouveau 0000:03:00.0: Evicting buffers...
    [ 508.801971] pata_atiixp 0000:00:14.1: PCI INT A disabled
    [ 508.802040] r8169 0000:02:00.0: eth0: link down
    [ 508.804819] r8169 0000:02:00.0: eth0: link up
    [ 508.856993] [drm] nouveau 0000:03:00.0: Idling channels...
    [ 508.857226] [drm] nouveau 0000:03:00.0: Suspending GPU objects...
    [ 508.903407] snd_hda_intel 0000:00:14.2: PCI INT A disabled
    [ 509.653173] r8169 0000:02:00.0: eth0: link down
    [ 509.991371] [drm] nouveau 0000:03:00.0: And we're gone!
    [ 509.991397] nouveau 0000:03:00.0: PCI INT A disabled
    [ 510.003349] PM: suspend of devices complete after 1209.834 msecs
    [ 510.003501] r8169 0000:02:00.0: PME# enabled
    [ 510.003509] pcieport 0000:00:06.0: wake-up capability enabled by ACPI
    [ 510.016920] PM: late suspend of devices complete after 13.567 msecs
    [ 510.017438] ACPI: Preparing to enter system sleep state S3
    [ 510.046822] PM: Saving platform NVS memory
    [ 510.046980] Disabling non-boot CPUs ...
    [ 510.149983] CPU 1 is now offline
    [ 510.253310] CPU 2 is now offline
    [ 510.258098] CPU 3 is now offline
    [ 510.258336] Extended CMOS year: 2000
    [ 510.258336] ACPI: Low-level resume complete
    [ 510.258336] PM: Restoring platform NVS memory
    [ 510.258336] PCI-DMA: Resuming GART IOMMU
    [ 510.258336] PCI-DMA: Restoring GART aperture settings
    [ 510.258336] Extended CMOS year: 2000
    [ 510.258336] Enabling non-boot CPUs ...
    [ 510.293928] Booting Node 0 Processor 1 APIC 0x1
    [ 510.293929] smpboot cpu 1: start_ip = 9a000
    [ 510.048288] Calibrating delay loop (skipped) already calibrated this CPU
    [ 510.048288] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    [ 510.048288] perf: IBS APIC setup failed on cpu #1
    [ 510.048288] Switch to broadcast mode on CPU1
    [ 510.430265] NMI watchdog enabled, takes one hw-pmu counter.
    [ 510.433741] CPU1 is up
    [ 510.440522] Booting Node 0 Processor 2 APIC 0x2
    [ 510.440524] smpboot cpu 2: start_ip = 9a000
    [ 510.151487] Calibrating delay loop (skipped) already calibrated this CPU
    [ 510.151487] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    [ 510.151487] perf: IBS APIC setup failed on cpu #2
    [ 510.151487] Switch to broadcast mode on CPU2
    [ 510.471839] NMI watchdog enabled, takes one hw-pmu counter.
    [ 510.471978] CPU2 is up
    [ 510.472048] Booting Node 0 Processor 3 APIC 0x3
    [ 510.472049] smpboot cpu 3: start_ip = 9a000
    [ 510.258093] Calibrating delay loop (skipped) already calibrated this CPU
    [ 510.258093] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    [ 510.258093] perf: IBS APIC setup failed on cpu #3
    [ 510.258093] Switch to broadcast mode on CPU3
    [ 510.503352] NMI watchdog enabled, takes one hw-pmu counter.
    [ 510.503508] CPU3 is up
    [ 510.507795] ACPI: Waking up from system sleep state S3
    [ 510.596799] pcieport 0000:00:02.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
    [ 510.596824] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100107, writing 0x40100507)
    [ 510.596845] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    [ 510.596863] ahci 0000:00:11.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100)
    [ 510.596866] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300107, writing 0x2300507)
    [ 510.596895] ahci 0000:00:11.0: set SATA to AHCI mode
    [ 510.597097] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
    [ 510.597131] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
    [ 510.597240] nouveau 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
    [ 510.597244] nouveau 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfafe0000)
    [ 510.597249] nouveau 0000:03:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xec01)
    [ 510.597252] nouveau 0000:03:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xf8000004)
    [ 510.597256] nouveau 0000:03:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c)
    [ 510.597259] nouveau 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfb000000)
    [ 510.597262] nouveau 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
    [ 510.597266] nouveau 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
    [ 510.597300] r8169 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
    [ 510.597306] r8169 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xf7fc0000)
    [ 510.597316] r8169 0000:02:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf7fff004)
    [ 510.597322] r8169 0000:02:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xd801)
    [ 510.597326] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
    [ 510.597331] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
    [ 510.597446] PM: early resume of devices complete after 0.696 msecs
    [ 510.597533] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 510.597552] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 510.597581] [drm] nouveau 0000:03:00.0: We're back, enabling device...
    [ 510.597586] nouveau 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 510.597589] pcieport 0000:00:06.0: wake-up capability disabled by ACPI
    [ 510.597594] nouveau 0000:03:00.0: setting latency timer to 64
    [ 510.597599] sd 0:0:0:0: [sda] Starting disk
    [ 510.597603] r8169 0000:02:00.0: PME# disabled
    [ 510.597605] [drm] nouveau 0000:03:00.0: POSTing device...
    [ 510.597607] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0xC718
    [ 510.597690] sd 2:0:0:0: [sdb] Starting disk
    [ 510.598730] serial 00:08: activated
    [ 510.598867] Extended CMOS year: 2000
    [ 510.610107] r8169 0000:02:00.0: eth0: link down
    [ 510.621123] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0xCC63
    [ 510.663986] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0xDA58
    [ 510.664015] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0xDB56
    [ 510.665114] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0xDDBE
    [ 510.665116] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table at offset 0xDE23
    [ 510.685128] [drm] nouveau 0000:03:00.0: Restoring GPU objects...
    [ 510.725417] [drm] nouveau 0000:03:00.0: Reinitialising engines...
    [ 510.725785] [drm] nouveau 0000:03:00.0: Restoring mode...
    [ 510.762015] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
    [ 510.762018] ata5.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out
    [ 510.762020] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 510.773704] ata5.00: configured for UDMA/66
    [ 510.916691] ata4: SATA link down (SStatus 0 SControl 300)
    [ 510.916722] ata2: SATA link down (SStatus 0 SControl 300)
    [ 511.883355] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 511.988643] ata1.00: configured for UDMA/133
    [ 512.681052] r8169 0000:02:00.0: eth0: link up
    [ 513.909989] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 513.920747] ata3.00: configured for UDMA/133
    [ 513.943983] PM: resume of devices complete after 3346.516 msecs
    [ 513.944116] PM: Finishing wakeup.
    [ 513.944117] Restarting tasks ... done.
    [ 515.507636] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 515.507721] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 515.507789] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 515.507806] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 515.507854] ehci_hcd 0000:00:12.2: debug port 1
    [ 515.507883] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7efe800
    [ 515.520050] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 515.520407] hub 1-0:1.0: USB hub found
    [ 515.520417] hub 1-0:1.0: 6 ports detected
    [ 515.533786] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 515.533832] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 515.533861] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 515.533877] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 515.533922] ehci_hcd 0000:00:13.2: debug port 1
    [ 515.533951] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf7efec00
    [ 515.543343] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 515.543684] hub 2-0:1.0: USB hub found
    [ 515.543694] hub 2-0:1.0: 6 ports detected
    [ 515.560288] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 515.560342] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 515.560371] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    [ 515.560410] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf7ef6000
    [ 515.617252] hub 3-0:1.0: USB hub found
    [ 515.617260] hub 3-0:1.0: 3 ports detected
    [ 515.643394] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 515.643453] ohci_hcd 0000:00:12.1: OHCI Host Controller
    [ 515.643484] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    [ 515.643527] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf7ef7000
    [ 515.701535] hub 4-0:1.0: USB hub found
    [ 515.701550] hub 4-0:1.0: 3 ports detected
    [ 515.713826] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 515.713884] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 515.713915] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [ 515.713956] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7efc000
    [ 515.771259] hub 5-0:1.0: USB hub found
    [ 515.771273] hub 5-0:1.0: 3 ports detected
    [ 515.786918] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 515.786977] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 515.787011] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    [ 515.787052] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf7efd000
    [ 515.844392] hub 6-0:1.0: USB hub found
    [ 515.844407] hub 6-0:1.0: 3 ports detected
    [ 515.857126] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 515.857157] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 515.857169] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    [ 515.857192] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7eff000
    [ 515.915097] hub 7-0:1.0: USB hub found
    [ 515.915111] hub 7-0:1.0: 2 ports detected
    [ 516.065641] EXT4-fs (sdb2): re-mounted. Opts: commit=0
    [ 516.089845] EXT4-fs (sdb4): re-mounted. Opts: commit=0
    [ 516.296726] usb 6-2: new low-speed USB device number 2 using ohci_hcd
    [ 516.465653] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input6
    [ 516.465885] generic-usb 0003:046D:C312.0002: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.1-2/input0
    This output is what I get right after a wake-up using the helper script from the other thread.
    Thank you for any help!
    Last edited by mariusmeyer (2012-03-03 15:57:16)

    I'll try changing some BIOS settings, thanks As of now, I can't test your suggestion regarding input devices and wake-up because it takes less then a second for the computer to auto-wake-up
    Also, I doubt the keyboard sets this off, because the scripts unloads all USB modules before suspending. But the mouse (a PS/2) on the other hand...
    EDIT: I found out that it was the network waking the computer After stopping the network daemon before suspending, I can suspend normally! On a side note, I can wake the computer by pressing a key on my keyboard, but I do not know whether I could before or not. Anyways, this is solved for me
    Last edited by mariusmeyer (2012-03-03 15:56:52)

  • Cannot resume from suspend to ram (fglrx)

    Hello,
    I have recently installed Catalyst drivers, instead of xf86-video-ati. I have laptop with PowerXPress(Intel/AMD hybrid graphics).
    I can't resume after suspend to ram. System freezes with black screen, tty switching doesn't work and I have to shutdown by holding power button.
    If I add "nomodeset" to GRUB, X fails to start. xorg.conf generated using "aticonfig --initial". Catalyst driver works fine.
    DE/DM: KDE 4/kwin
    Graphic cards: Intel HD Graphics 3000; AMD Radeon 7600M.
    Laptop: HP pavillion g6 2004er.

    Welcome to the forum!
    Yes, some Lenovo employees do read and post to this forum.  Mark is quite active, and several others post as well.  In addition, there are lurkers who just read without making public comments although sometimes they ask the mod team to either gather more information or pass along advice.
    However, here are the expectations of their participation from the Welcome message:
    These communities have been created to provide a high quality atmosphere in which users of Lenovo products and services may share experiences and expertise. While members from Lenovo may participate at intervals to engage in the discussions and offer advice and suggestions, this forum is not designed as a dedicated and staffed support channel.
    The bottom line is there's no guarantee that you will get an answer to a question here directly from Lenovo. 
    On the other hand, you just might!  ;-)
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Jane
    2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
    I am not a Lenovo Employee.
    I AM one of those crazy ThinkPad zealots!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

  • OCZ Vertex 2 fails to fully resume from suspend to RAM

    I have installed an OCZ Vertex 2 60GB SSD in my laptop and I cannot resume normally from S3 using pm-suspend or any other method.  It looks like / isn't remounting, however it does seem that home is remounting. 
    I have flashed the firmware to the latest.  I tested suspend after a base install, with only acpi and hal (pm-utils being a dep for hal) and it failed. 
    Here is fstab, mtab, and fdisk -l.  If any other information is needed let me know. 
    Disk /dev/sda: 60.0 GB, 60022480896 bytes
    255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0xb8372fcd
    Device Boot Start End Blocks Id System
    /dev/sda1 2048 206847 102400 83 Linux
    /dev/sda2 206848 21178367 10485760 83 Linux
    /dev/sda3 21178368 117231407 48026520 83 Linux
    proc /proc proc rw,relatime
    sys /sys sysfs rw,relatime
    udev /dev devtmpfs rw,nosuid,relatime,size=10240k,nr_inodes=502347,mode=755
    /dev/disk/by-uuid/fd40337d-ed8a-4e76-be3f-aa09f5558998 / ext4 rw,noatime,barrier=1,data=ordered,discard
    devpts /dev/pts devpts rw 0 0
    shm /dev/shm tmpfs rw,nosuid,nodev 0 0
    /dev/sda3 /home ext4 rw,noatime,discard 0 0
    /dev/sda1 /boot ext2 rw 0 0
    none /tmp tmpfs rw,nosuid,nodev,noatime,size=1000M,mode=1777 0 0
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    devpts /dev/pts devpts defaults 0 0
    shm /dev/shm tmpfs nodev,nosuid 0 0
    #/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
    #/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
    #/dev/fd0 /media/fl auto user,noauto 0 0
    UUID=8f046367-0eec-410f-b3b5-0e298e065c5e /home ext4 defaults,noatime,discard 0 1
    UUID=a6f6aa9a-e5d8-4763-ad75-0b0b6c549929 /boot ext2 defaults 0 1
    UUID=fd40337d-ed8a-4e76-be3f-aa09f5558998 / ext4 defaults,noatime,discard 0 1
    none /tmp tmpfs nodev,nosuid,noatime,size=1000M,mode=1777 0 0
    Here are some errors after suspend:
    http://img180.imageshack.us/f/fserror.jpg/
    http://yfrog.com/izfserror2j
    I've also been advised to try enter S1, however I'm not sure how to do that since power states don't seem to work like this anymore (since kernel 2.6):
    #echo 1 > sleep
    I'm very frustrated at this point and I will be extremely gracious for any advice on this problem

    I just successfully suspended to RAM.  I was redirecting the log file to text file to make sure it kept it.....here it is.  I'm going to check it out further to see if a package update fixed it, or if it was simply dumb luck.
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    kernel.acpi_video_flags = 0
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Mon Nov 1 19:35:30 CDT 2010: performing suspend
    Initial commandline parameters:
    Thu Nov 4 00:54:33 CDT 2010: Running hooks for suspend.
    Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
    Linux l33tpc 2.6.36-ARCH #1 SMP PREEMPT Sun Oct 31 09:29:11 CET 2010 x86_64 Genuine Intel(R) CPU U7300 @ 1.30GHz GenuineIntel GNU/Linux
    Module Size Used by
    cryptd 6262 0
    aes_x86_64 7412 1
    aes_generic 26170 1 aes_x86_64
    ipv6 281961 14
    ext2 63599 1
    usb_storage 42540 0
    uvcvideo 61404 0
    videodev 64318 1 uvcvideo
    v4l1_compat 15578 2 uvcvideo,videodev
    v4l2_compat_ioctl32 10212 1 videodev
    arc4 1378 2
    ecb 2041 2
    snd_hda_codec_intelhdmi 10645 1
    snd_hda_codec_realtek 275631 1
    i915 320893 2
    snd_seq_dummy 1431 0
    ath9k 79976 0
    snd_seq_oss 28760 0
    joydev 10055 0
    snd_seq_midi_event 5436 1 snd_seq_oss
    snd_hda_intel 22253 0
    snd_seq 50082 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 5297 3 snd_seq_dummy,snd_seq_oss,snd_seq
    uhci_hcd 21926 0
    snd_hda_codec 79192 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
    mac80211 195924 1 ath9k
    drm_kms_helper 25963 1 i915
    snd_pcm_oss 39157 0
    snd_mixer_oss 17106 1 snd_pcm_oss
    ath9k_common 3496 1 ath9k
    snd_hwdep 6110 1 snd_hda_codec
    drm 175314 2 i915,drm_kms_helper
    ath9k_hw 289341 2 ath9k,ath9k_common
    snd_pcm 71921 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    ath 8822 2 ath9k,ath9k_hw
    ehci_hcd 36860 0
    i2c_algo_bit 4911 1 i915
    asus_laptop 14243 0
    i2c_core 18726 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
    sparse_keymap 2563 1 asus_laptop
    snd_timer 19265 2 snd_seq,snd_pcm
    ac 3105 0
    vboxdrv 1740411 0
    battery 10039 0
    cfg80211 142886 3 ath9k,mac80211,ath
    snd 57562 11 snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_hda_intel,snd_seq_device,snd_pcm_oss,snd_hda_codec,snd_hwdep,snd_mixer_oss,snd_pcm,snd_timer
    atl1c 31532 0
    video 19305 1 i915
    iTCO_wdt 10669 0
    sg 25652 0
    processor 25936 2
    rfkill 15882 2 asus_laptop,cfg80211
    soundcore 5969 1 snd
    psmouse 52592 0
    output 1940 1 video
    iTCO_vendor_support 1801 1 iTCO_wdt
    thermal 12242 0
    button 4834 1 i915
    usbcore 137506 5 usb_storage,uvcvideo,uhci_hcd,ehci_hcd
    evdev 8519 7
    serio_raw 4486 0
    intel_agp 29427 2 i915
    led_class 2331 2 ath9k,asus_laptop
    pcspkr 1819 0
    snd_page_alloc 7249 2 snd_hda_intel,snd_pcm
    ext4 313574 2
    mbcache 5722 2 ext2,ext4
    jbd2 69002 1 ext4
    crc16 1297 1 ext4
    sd_mod 25824 4
    ahci 20353 3
    libahci 17886 1 ahci
    libata 156316 2 ahci,libahci
    scsi_mod 124859 4 usb_storage,sg,sd_mod,libata
    total used free shared buffers cached
    Mem: 4020904 219844 3801060 0 22892 53336
    -/+ buffers/cache: 143616 3877288
    Swap: 0 0 0
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
    Having NetworkManager put all interaces to sleep...Done.
    /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/91wicd suspend suspend:
    /usr/lib/pm-utils/sleep.d/91wicd suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    kernel.acpi_video_flags = 0
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Thu Nov 4 00:54:34 CDT 2010: performing suspend
    Thu Nov 4 00:57:50 CDT 2010: Awake.
    Thu Nov 4 00:57:50 CDT 2010: Running hooks for resume
    Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
    /usr/lib/pm-utils/sleep.d/95led resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/91wicd resume suspend:
    /usr/lib/pm-utils/sleep.d/91wicd resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
    Reloaded unloaded modules.
    /usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
    Having NetworkManager wake interfaces back up...Done.
    /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
    /usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    Thu Nov 4 00:57:52 CDT 2010: Finished.
    It failed again.  I have compared the logs and the last entry is :
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Thu Nov 4 01:24:45 CDT 2010: performing suspend
    Last edited by DarksideEE7 (2010-11-04 07:29:06)

  • [Solved] Suspend to RAM no longer works

    Suspend to RAM when closing my laptop lid worked out the box for me since I put Arch on my Dell XPS 14. After doing a pacman -Su yesterday (where I noticed that the kernel was updated, but it might be something else) it no longer works. Running 'systemctl suspend' in the terminal does work. Do I have to update a config?
    Last edited by skip (2014-04-01 19:48:23)

    For anyone else that finds this, systemd 212 doesn't suspend with lid closed with or without external monitor for those using the Nvidia proprietary drivers. Nvidia doesn't provide the necessary information for systemd to know whether or not an external monitor is connected, and thus it plays it safe and doesn't suspend. This is explained nicely at the Freedesktop bug linked above, but I wanted to pass it along here for those that won't follow the link.
    Sounds like they're leaning toward reversing the preference (dock/external display users will need to opt out of suspending with lid close) in future versions since non-dock/monitor users >> dock/monitor users.

  • System freeze after resume from suspend to RAM

    Hi,
    since quite a while (probably ever) I am unable to suspend my computer to RAM because everytime it freezes a few seconds after resuming, never to become alive again until a reboot. After some investigation, I managed to get kernel logs by taking a picture of my screen. The logs were not written to disk, hence I didn't see anything before. I had to write these by hand, I hope I didn't insert any mistakes:
    kernel: sas: Enter sas_scsi_recover_host busy: 2 failed: 2
    kernel: sas: trying to find task 0xfff880008b5b680
    kernel: sas: sas_scsi_find_task: aborting task 0xfff880008b5b680
    kernel: sas: sas_scsi_find_task: task 0xfff880008b5b680 is aborted
    kernel: sas: sas_eh_handle_sas_errors: task 0xfff880008b5b680 is aborted
    kernel: sas: trying to find task 0xffff8804606ccb40
    kernel: sas: sas_scsi_find_task: aborting task 0xffff8804606ccb40
    kernel: sas: sas_scsi_find_task: task 0xffff8804606ccb40 is aborted
    kernel: sas: sas_eh_handle_sas_errors: task 0xffff8804606ccb40 is aborted
    kernel: sas: ata7: end_device-0:0: cmd error handler
    kernel: sas: ata8: end_device-0:1: cmd error handler
    kernel: sas: ata7: end_device-0:0: dev error handler
    kernel: ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    kernel: ata7.00: failed command: READ VERIFY SECTOR(S)
    kernel: ata7.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 11
    res 40/00:48:a0:79:88/00:00:07:00:00/40 Emask 0x4 (timeout)
    kernel: ata7.00: status { DRDY }
    kernel: ata7: hard resetting link
    kernel: sas: ata8: end_device-0:1: dev error handler
    kernel: ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    kernel: ata8.00: failed command: READ VERIFY SECTOR(S)
    kernel: ata8.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 11
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    kernel: ata8.00: status { DRDY }
    kernel: ata8: hard resetting link
    This issue seems to be related to disk failures like bad sectors but I am quite sure, that my SSDs are in a good shape. I ran some SMART tests, they all turned out to be okay. Suspending from my dual-booted Windows works fine as well (although if the bad sector would be on the linux partition, it would probably not affect Windows).
    Here's my setup:
    $ lsblk -St
    NAME HCTL TYPE VENDOR MODEL REV TRAN NAME ALIGNMENT MIN-IO OPT-IO PHY-SEC LOG-SEC ROTA SCHED RQ-SIZE RA WSAME
    sda 1:0:0:0 disk ATA Corsair Force 3 2 sata sda 0 512 0 512 512 0 cfq 128 128 0B
    sdb 7:0:0:0 disk ST1000DM 003-9YN162 NDP3 usb sdb 0 512 0 512 512 1 cfq 128 128 0B
    sdc 0:0:0:0 disk ATA OCZ-REVODRIVE3 2.25 sas sdc 0 512 0 512 512 0 cfq 128 128 0B
    sdd 0:0:1:0 disk ATA OCZ-REVODRIVE3 2.25 sas sdd 0 512 0 512 512 0 cfq 128 128 0B
    sr0 2:0:0:0 rom TSSTcorp CDDVDW SH-222AL SB00 sata sr0 0 512 0 512 512 1 cfq 128 128 0B
    $ lsblk -f
    NAME FSTYPE LABEL UUID MOUNTPOINT
    sda
    ├─sda1 ntfs Recovery 567437B974379B27
    ├─sda2 vfat DC2D-099E /boot
    ├─sda3
    ├─sda4 ntfs FEBED982BED933BD
    ├─sda5 ext4 arch 41bad924-84a2-4e0a-9cd4-4ea723a2a5a3 /
    └─sda6 swap 793fb3c1-8bec-4023-a7c3-ee94eee2e67a [SWAP]
    sdb
    └─sdb1 ntfs HDDRIVE2GO 2212E50812E4E231
    sdc
    └─sdc1 linux_raid_member home:0 208937dc-2904-e71c-435a-9928671e07a3
    └─md0 ext4 revodrive ffe9d38f-87f2-44e1-ae26-f36c910af3c5 /home
    sdd
    └─sdd1 linux_raid_member home:0 208937dc-2904-e71c-435a-9928671e07a3
    └─md0 ext4 revodrive ffe9d38f-87f2-44e1-ae26-f36c910af3c5 /home
    I am not sure which one of the disks causes the freeze but I assume it's the revodrive because the logs talk about two drives. The Revodrive internally holds two drives, which are set up to operate in a RAID 0. Windows is installed on the Corsair drive, and has no access to the Revodrive. However, I used to run Windows on the Revodrive a few years ago, and it worked just fine.
    Another interesting thing is that when I try to test suspend to RAM, the system does not freeze, nor produce errors. This only happens if none is written to /sys/power/pm_test (which means no automated wake-up, no testing).
    Any ideas on how I could narrow down this issue? Thanks a lot!
    EDIT
    I just checked and confirmed that this issue is originating from the OCZ Revodrive:
    $ dmesg | grep ata7.00 | head
    [ 7.136432] ata7.00: ATA-8: OCZ-REVODRIVE3, 2.25, max UDMA/133
    [ 7.136436] ata7.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 7.146442] ata7.00: configured for UDMA/133
    $ dmesg | grep ata8.00 | head
    [ 7.310018] ata8.00: ATA-8: OCZ-REVODRIVE3, 2.25, max UDMA/133
    [ 7.310023] ata8.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 7.320022] ata8.00: configured for UDMA/133
    Last edited by tuttiarch (2015-01-31 15:54:29)

    Thank you for the link, unfortunally I don't have a NVIDIA card but use the Intel IGP (HD4600, Haswell) - maybe I should have mentioned that...
    And other than in this bug report I cannot kill X or anything because neither other TTYs work - I cannot input anything (although the hotkeys work weird enough) nor is SSHD running because the system is completely frozen...
    Very funny thing is that for the last 2 days my system didnt freeze once (suspended about 6-7 times during one boot), even though for the 2 weeks prior to that, it froze EVERY SINGLE TIME I resumed from suspend, it didnt work once...

  • X121e - Black screen after wake up from suspend to RAM

    I am the owner of a ThinkPad X121e - Notebook Type 3051-5QG (AMD E350 Processor). After a BIOS - Update from 1.07 to 1.16 I have a problem to wake it up from the S3 - Suspend to RAM function.
    The Notebook restarts and the fan is working but there is no beep and the screen stays black. There is no way to get it working except a complete hard shutdown pushing the on/off-Button. 
    Does anybody know the problem and has a solution? Or do I have to wait and hope for the next BIOS-Version to solve the problem? I would like to downgrade to 1.07 BIOS, but I am afraid that this is not possible.
    Solved!
    Go to Solution.

    Since 2012-12-02 Lenovo has published an new Bios-Version 1.17 .
    I installed the update today and the problem is gone. I hope there is no new bug in this Bios-Version, but up to now everything seems to work properly. 

  • Wake up from suspend to ram *twice*

    Hello!
    I am running arch on my Asus M51Vr laptop. Whenever I suspend to RAM and try to resume (i.e. hit a key), the laptop wakes up (sometimes without even locking the screen), and after 3-5 seconds it goes back to sleep; if I hit a key again, it will wake up with the screen locked (as configured) and then proceed normally.
    This issue appeared some time ago after an update (was not there after installing arch). I am not sure where to start with the search for a fix, could you please help me?
    Thank you!

    I actually do have that script:
    [root@phoenix group2]# cat /usr/lib/pm-utils/sleep.d/99video
    #!/bin/sh
    # Copyright 2006-2007 Richard Hughes <[email protected]>
    # Copyright 2007 Peter Jones <[email protected]>
    # This program is free software; you can redistribute it and/or modify
    # it under the terms of version 2 of the GNU General Public License as
    # published by the Free Software Foundation.
    # Handle video quirks. If you are having suspend/resume issues,
    # troubleshooting using this hook is probably the best place to start.
    # If it weren't for video card quirks, suspend/resume on Linux would be
    # a whole lot more stable.
    . "${PM_FUNCTIONS}"
    for opt in $PM_CMDLINE; do
    case "${opt##--quirk-}" in # just quirks, please
    dpms-on) QUIRK_DPMS_ON="true" ;;
    dpms-suspend) QUIRK_DPMS_SUSPEND="true" ;;
    radeon-off) QUIRK_RADEON_OFF="true" ;;
    reset-brightness) QUIRK_RESET_BRIGHTNESS="true" ;;
    s3-bios) QUIRK_S3_BIOS="true" ;;
    s3-mode) QUIRK_S3_MODE="true" ;;
    vbe-post) QUIRK_VBE_POST="true" ;;
    vbemode-restore) QUIRK_VBEMODE_RESTORE="true" ;;
    vbestate-restore) QUIRK_VBESTATE_RESTORE="true" ;;
    vga-mode-3) QUIRK_VGA_MODE_3="true" ;;
    no-fb) QUIRK_NOFB="true" ;;
    save-pci) QUIRK_SAVE_PCI="true" ;;
    no-chvt) QUIRK_NO_CHVT="true" ;;
    none) QUIRK_NONE="true" ;;
    *) continue ;;
    esac
    done
    reset_brightness()
    for bl in /sys/class/backlight/* ; do
    [ -f "$bl/brightness" ] || continue
    BR="$(cat $bl/brightness)"
    echo 0 > "$bl/brightness"
    echo "$BR" > "$bl/brightness"
    done
    if command_exists vbetool; then
    vbe() { vbetool "$@"; }
    else
    vbe() { echo "vbetool not installed!" 1>&2; return 1; }
    fi
    if command_exists radeontool; then
    radeon() { radeontool "$@"; }
    else
    radeon() { echo "radeontool not found" 1>&2; return 1; }
    fi
    die_if_framebuffer()
    [ -d "/sys/class/graphics/fb0" ] || return
    echo "--quirk-no-fb passed, but system is using a framebuffer."
    echo "Aborting."
    exit 1
    save_fbcon()
    local con
    for con in /sys/class/graphics/*/state; do
    [ -f $con ] || continue
    echo 1 >"${con}"
    done
    resume_fbcon()
    local con
    for con in /sys/class/graphics/*/state; do
    [ -f $con ] || continue
    echo 0 >"${con}"
    done
    maybe_chvt()
    is_set "$QUIRK_NO_CHVT" && return
    fgconsole |savestate console
    chvt 63
    maybe_deallocvt()
    state_exists console || return 0
    chvt $(restorestate console)
    deallocvt 63
    # Some tiny helper functions for quirk handling
    quirk() { is_set "$1" && [ -z $QUIRK_NONE ]; }
    # save/restore vbe state
    vbe_savestate() { vbe vbestate save |savestate vbestate; }
    vbe_restorestate() { restorestate vbestate |vbe vbestate restore; }
    # save/restore the vbe mode
    vbe_savemode() { vbe vbemode get |savestate vbemode; }
    vbe_restoremode()
    # this is a little mode complicated to handle special-casing mode 3.
    local vbemode=$(restorestate vbemode)
    if [ "$vbemode" = "3" ]; then
    vbe vgamode set $vbemode
    else
    vbe vbemode set $vbemode
    fi
    # post the video card
    vbe_post()
    local rom="/var/run/video.rom"
    # if we do not have a romfile, do not post with it.
    [ -f "$rom" ] || unset rom
    vbe post $rom
    sleep 0.1
    # turn critical bits of radeon cards off/on
    radeon_off() { radeon dac off; radeon light off; }
    radeon_on() { radeon dac on; radeon light on; }
    # save and restore video card PCI config state
    save_pci()
    local pci="/sys/bus/pci/devices"
    for dev in "${pci}"/*; do
    [ -f "${dev}/class" ] || continue
    [ $(cat "${dev}/class") = "0x030000" ] || continue
    [ -f "${dev}/config" ] || continue
    # it is a video card, it has a configuration. Save it.
    savestate "pci_video_${dev##*/}" <${dev}/config
    done
    restore_pci()
    local pci="/sys/bus/pci/devices"
    for dev in "${pci}"/*; do
    state_exists "pci_video_${dev##*/}" || continue
    restorestate "pci_video_${dev##*/}" > "${dev}/config"
    done
    suspend_video()
    # 0=nothing, 1=s3_bios, 2=s3_mode, 3=both
    local acpi_flag=0
    quirk "${QUIRK_S3_BIOS}" && acpi_flag=$(($acpi_flag + 1))
    quirk "${QUIRK_S3_MODE}" && acpi_flag=$(($acpi_flag + 2))
    sysctl -w kernel.acpi_video_flags=$acpi_flag
    quirk "${QUIRK_NOFB}" && die_if_framebuffer
    quirk "${QUIRK_VBESTATE_RESTORE}" && vbe_savestate
    quirk "${QUIRK_VBEMODE_RESTORE}" && vbe_savemode
    quirk "${QUIRK_RADEON_OFF}" && radeon_off
    quirk "${QUIRK_SAVE_PCI}" && save_pci
    quirk "${QUIRK_VGA_MODE_3}" && vbe vbemode set 3
    quirk "${QUIRK_DPMS_SUSPEND}" && vbe dpms suspend
    save_fbcon
    resume_video()
    # We might need to do one or many of these quirks
    quirk "${QUIRK_SAVE_PCI}" && restore_pci
    quirk "${QUIRK_VBE_POST}" && vbe_post
    quirk "${QUIRK_VBESTATE_RESTORE}" && vbe_restorestate
    quirk "${QUIRK_VBEMODE_RESTORE}" && vbe_restoremode
    resume_fbcon # also should be handled by a quirk.
    quirk "${QUIRK_RADEON_OFF}" && radeon_on
    quirk "${QUIRK_DPMS_ON}" && vbe dpms on
    quirk "${QUIRK_RESET_BRIGHTNESS}" && reset_brightness
    return 0 # avoid spurious hook exit failure message.
    help() {
    echo # first echo makes it look nicer.
    echo "Video quirk handler options:"
    echo
    echo " --quirk-dpms-on"
    echo " --quirk-dpms-suspend"
    echo " --quirk-radeon-off"
    echo " --quirk-reset-brightness"
    echo " --quirk-s3-bios"
    echo " --quirk-s3-mode"
    echo " --quirk-vbe-post"
    echo " --quirk-vbemode-restore"
    echo " --quirk-vbestate-restore"
    echo " --quirk-vga-mode-3"
    echo " --quirk-none"
    case "$1" in
    suspend) maybe_chvt; suspend_video ;;
    hibernate) maybe_chvt
    if is_set "$HIBERNATE_RESUME_POST_VIDEO"; then
    suspend_video
    fi
    resume) resume_video; maybe_deallocvt;;
    thaw)
    if is_set "${HIBERNATE_RESUME_POST_VIDEO}"; then
    resume_video
    fi
    maybe_deallocvt
    help) help ;;
    esac
    I did not touch the configuration files (I am not responsible for what pacman might have done).

  • Resume from suspend to ram fails (pm-utils)

    Hi,
    When I suspend to ram the computer seems to suspend normally, but the resume fails and it triggers a normal boot instead.
    I'm on a Lenovo Thinkpad X60 laptop with the 2.6.30 kernel and gnome-power-manager (pm-utils).

    Unfortunately, every laptop seems to have its own idiosyncrasies with this (not to mention differences in different users' setups---e.g., what devices are attached, what modules are loaded). So it takes some serious trial and error to figure out how to get this to work. All I can suggest is that you become intimately familiar with the wiki page, and with the HAL quirks site, and that you try to eliminate all the daemons and so on you can while still generating the problem (e.g., boot into a virtual console instead of gnome, if you're comfortable with that). Then start a process of trying different quirks as explained on those webpages. Take good notes so you don't lose track of which combinations of quirks show result in what behavior.
    The HAL quirks site will also point you to what other users using your laptop, or similar laptops, found to work. But trial and error may still be necessary.

  • Pc doesn't resume from suspend to ram anymore (new 3.4.2 kernel)

    hi.
    I was using nouveau without problem and with the little trick of using acpi_os_name="Microsoft Windows NT" kernel parameter, I was able to suspend to ram from gnome, and resume the pc without problem
    Not anymore. Now, if I suspend to ram, the pc does not resume. It correctly wake up the dvd drive, the hard-drive, began to read stuff on the hdd but the led of the power button stays blinking and the screen is not waken up.
    I am thinking this is due to the update of nouveau and a new regression but this seems related to the bios or hardware. For example. If after the broken resume, I hold down 10 seconds the power button to power off, and press it again to power on, the led is still blinking and it does not boot. I need to power off by removing the power cord.
    Is it because I run (to test it) the nvida-173xx, and that did something to the graphic card ?
    Did anyone got similar problem with the new nouveau driver ?
    I tried to downgrade libgl, libdrm, libdrm-nouveau, nouveau-dri, xf86-video-nouveau and mesa but I still got the problem. so ?
    I have a geforce 8300 GS. the pc is an inspiron 531
    Last edited by solstice (2012-06-18 08:56:49)

    Probably I have the same issue with geforce GTS250.
    After upgrading to kernel 3.4.2 or so, my system doesn't resume from suspend, only black screen and cannot switch to other ttys.
    I first thought this problem be caused by the kernel, but downgrading nvidia to 295.53-2 solved this problem on kernel 3.4.3 so this likely is caused by nvidia 302.17.
    In my case there is something like error in pm-suspend.log when resume failed:
    Fri Jun 22 05:36:12 JST: Awake.
    Fri Jun 22 05:36:12 JST: Running hooks for resume
    Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
    /usr/lib/pm-utils/sleep.d/95led resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
    Running hook /etc/pm/sleep.d/90alsa resume suspend:
    xcb_connection_has_error() returned true
    And curiously, if I had launched vlc media player before suspend, resume worked well even on nvidia 302.17.

  • [SOLVED] After resume from suspend to RAM, system is slow / unstable

    Hello,
    I have come across some strangeness when trying to suspend my system.  The
    computer is a lenovo U350.  I have read a lot of threads on these subjects,
    but I never found one that quite matched the experiences I'm having, so I felt
    compelled to make a new post.
    Here's what's going on:  I boot into the terminal, and then run pm-suspend.
    Within a few seconds, the computer goes to sleep, just as I had hoped.  The
    problem is that my computer seems a little groggy when I wake it back up.
    Usually, when running a command like ps aux | less, the screen fills up very
    quickly.  After I resume from sleep, running ps aux | less is noticeably slow.
    It takes a full second (+/- epsilon) to fill the screen.  Other symptoms: if I
    suspend / resume in the terminal, and then start a window manager (KDE), the
    graphics will be slow and choppy, and when I try to exit the window manager, I
    usually end up having to perform the dreaded REISUB after getting stuck on a
    blank screen with a non-blinking cursor in the upper left hand corner.
    Suspend / resume from KDE will result in either the black, non-responsive
    screen as soon as I try to resume, or in the choppy graphics, followed by the
    non-responsive black screen when I log out.
    I looked at the process list before and after, and noticed that when the
    system is first resumed, there are around 50-60 additional kworker processes
    running than when I put it to sleep.  I don't know if this is normal or not.
    Also, hci0 has been killed, and a new hci0 process has taken its place.  The
    same goes for one of the udevd processes.  About 40-50 of the kworker
    processes finish after a few minutes, but this does not change the slowness of
    ps aux | less, nor does it help with my window manager issues.
    I ran a few (not so precise) performance tests before and after doing a
    suspend, and got the same results (the test was just to compile some LaTeX,
    which took about 4-5 seconds either way).
    I examined the pm-suspend.log, and everything looked peachy.  All of the
    hooks returned success for the suspend, as well as the resume.  I'm happy to
    post this if needed.  I did not change any of the default settings for
    pm-suspend.
    Anyhow, I've read a lot of threads, and seen a lot of suggestions, e.g.:
    https://bbs.archlinux.org/viewtopic.php?id=137682
    https://bbs.archlinux.org/viewtopic.php?id=136292 (use vbetool?)
    https://bbs.archlinux.org/viewtopic.php?id=126174 (suspend tons of modules?)
    https://bbs.archlinux.org/viewtopic.php?id=131827 (hpet=disable ?)
    However, I'm not that confident in any of them, since no one had quite the
    same issue.  I was hoping that someone could point me in the right direction
    before I start blindly walking through all the candidate fixes and risk
    unleashing chaos into my system.  Many thanks in advance for your help.
    Oh, and in case this post was not yet long enough, here is some system
    information:
    lspci:
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
    08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
    lsmod:
    Module Size Used by
    aes_x86_64 7508 3
    cryptd 8309 0
    aes_generic 26138 1 aes_x86_64
    coretemp 5590 0
    cpufreq_ondemand 6164 2
    acpi_cpufreq 5877 1
    mperf 1275 1 acpi_cpufreq
    freq_table 2515 2 acpi_cpufreq,cpufreq_ondemand
    arc4 1410 2
    joydev 9895 0
    snd_hda_codec_hdmi 24121 1
    iwlwifi 248196 0
    i915 420018 3
    snd_hda_codec_conexant 47300 1
    uvcvideo 64311 0
    mac80211 228527 1 iwlwifi
    videodev 82101 1 uvcvideo
    snd_hda_intel 23375 0
    snd_hda_codec 89389 3 snd_hda_intel,snd_hda_codec_conexant,snd_hda_codec_hdmi
    broadcom 7270 0
    tg3 134884 0
    ideapad_laptop 8534 0
    snd_hwdep 6389 1 snd_hda_codec
    snd_pcm 74780 3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
    snd_page_alloc 7153 2 snd_pcm,snd_hda_intel
    snd_timer 19544 1 snd_pcm
    snd 59214 7 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_conexant,snd_hda_codec_hdmi
    iTCO_wdt 11885 0
    v4l2_compat_ioctl32 8316 1 videodev
    i2c_i801 8187 0
    i2c_algo_bit 5263 1 i915
    drm_kms_helper 26137 1 i915
    intel_agp 10904 1 i915
    btusb 11385 0
    cfg80211 172260 2 mac80211,iwlwifi
    bluetooth 151999 1 btusb
    sparse_keymap 3120 1 ideapad_laptop
    soundcore 6210 1 snd
    drm 188499 4 drm_kms_helper,i915
    rfkill 15498 3 bluetooth,cfg80211,ideapad_laptop
    serio_raw 4429 0
    iTCO_vendor_support 1961 1 iTCO_wdt
    media 10597 2 videodev,uvcvideo
    psmouse 61311 0
    libphy 16985 2 tg3,broadcom
    i2c_core 20492 6 drm,drm_kms_helper,i2c_algo_bit,i2c_i801,videodev,i915
    intel_gtt 14519 3 intel_agp,i915
    pcspkr 1819 0
    evdev 9530 8
    thermal 7799 0
    wmi 8475 0
    battery 6453 0
    ac 2344 0
    video 11164 1 i915
    button 4470 1 i915
    processor 25582 3 acpi_cpufreq
    ext4 420412 3
    crc16 1359 2 ext4,bluetooth
    jbd2 71499 1 ext4
    mbcache 5881 1 ext4
    sd_mod 28307 5
    ahci 20037 4
    libahci 19559 1 ahci
    libata 166654 2 libahci,ahci
    scsi_mod 133676 2 libata,sd_mod
    uhci_hcd 23116 0
    ehci_hcd 40698 0
    usbcore 146113 5 ehci_hcd,uhci_hcd,btusb,uvcvideo
    usb_common 954 1 usbcore
    Last edited by wes (2012-04-06 21:34:43)

    I did try reinstalling, actually.  But I did not think to remove the battery and the ram...  I'm very curious now: what is the rationale / intuition for that?  Or is it just that empirical evidence suggests this may be a good idea?
    Anyhow, the reinstall by itself did not help.  I tried it out with a pretty bare-bones setup and had the same results.  Here are a few other things I noticed:
    - After the suspend, one of the cores is always running at the maximum clock frequency, according to powertop (although, according to ps aux, no one is doing any work).
    - Even if I ssh to a nearby machine, I get the same experience when running `ls`.  The screen fills very slowly.  That narrows things down a little bit, but I was already guessing it would be graphics-related.
    I have also tried a few random kernel boot parameters after reading things online, but none of those worked, and several stopped the machine from booting at all.
    Thanks for your help.

  • Bus/io errors after resume from suspend to ram

    Something very strange happened today. When I woke my computer out of suspend today, the BIOS made a bad beep sound (once, high pitched, the error kind of), but booted anyways.
    After starting up, I tried starting programs like sonata, gnome-mplayer, but both failed with either an "io error" or "bus error". Strangly, I also tested "df" an it worked.
    That happened the first time, but I'm worried it's gonna happen again, because I have NO idea what could have failed.
    pm-suspend log looks fine
    Initial commandline parameters:
    Sa 27. Mär 02:30:54 CET 2010: Running hooks for suspend.
    /usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
    success.
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux segfault 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:44:03 CET 2010 x86_64 AMD Phenom(tm) II X4 940 Processor AuthenticAMD GNU/Linux
    Module                  Size  Used by
    it87                   18948  0
    hwmon_vid               2756  1 it87
    ipv6                  283335  30
    nfs                   295530  0
    lockd                  65788  1 nfs
    fscache                39679  1 nfs
    nfs_acl                 2335  1 nfs
    auth_rpcgss            40448  1 nfs
    sunrpc                186318  5 nfs,lockd,nfs_acl,auth_rpcgss
    nvidia               9515743  48
    cryptd                  6076  0
    aes_x86_64              7420  1
    aes_generic            26178  1 aes_x86_64
    fuse                   58757  2
    joydev                  9800  0
    usbhid                 38471  0
    hid                    75813  1 usbhid
    arc4                    1354  2
    ecb                     1953  2
    snd_seq_dummy           1439  0
    snd_seq_oss            29023  0
    snd_seq_midi_event      5316  1 snd_seq_oss
    snd_seq                50558  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device          5181  3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_pcm_oss            39011  0
    snd_mixer_oss          17299  1 snd_pcm_oss
    nouveau               428060  0
    ttm                    46450  1 nouveau
    drm_kms_helper         23817  1 nouveau
    drm                   159774  3 nouveau,ttm,drm_kms_helper
    i2c_algo_bit            4935  1 nouveau
    snd_ctxfi              90523  1
    ath5k                 125370  0
    ohci_hcd               21485  0
    snd_pcm                70222  2 snd_pcm_oss,snd_ctxfi
    mac80211              166738  1 ath5k
    ath                     8400  1 ath5k
    snd_timer              18799  2 snd_seq,snd_pcm
    cfg80211              122783  3 ath5k,mac80211,ath
    rfkill                 15228  1 cfg80211
    edac_core              34056  0
    snd                    57408  10 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_ctxfi,snd_pcm,snd_timer
    soundcore               6095  1 snd
    snd_page_alloc          7033  2 snd_ctxfi,snd_pcm
    edac_mce_amd            6785  0
    led_class               2577  1 ath5k
    firewire_ohci          23601  0
    firewire_core          43019  1 firewire_ohci
    crc_itu_t               1273  1 firewire_core
    ppdev                   5910  0
    i2c_piix4               8680  0
    ehci_hcd               35082  0
    usbcore               140517  4 usbhid,ohci_hcd,ehci_hcd
    i2c_core               18137  6 nvidia,nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
    r8169                  36214  0
    mii                     3738  1 r8169
    parport_pc             31260  1
    button                  4714  1 nouveau
    thermal                11834  0
    evdev                   8825  10
    sg                     25275  0
    lp                      8684  0
    parport                29923  3 ppdev,parport_pc,lp
    pcspkr                  1795  0
    cpufreq_ondemand        8101  0
    powernow_k8            11886  0
    freq_table              2331  2 cpufreq_ondemand,powernow_k8
    processor              30310  1 powernow_k8
    rtc_cmos                8904  0
    rtc_core               14631  1 rtc_cmos
    rtc_lib                 1810  1 rtc_core
    ext3                  125021  2
    jbd                    46334  1 ext3
    mbcache                 5466  1 ext3
    sr_mod                 15043  0
    cdrom                  36354  1 sr_mod
    sd_mod                 26313  5
    pata_acpi               3288  0
    ata_generic             3111  0
    ahci                   34929  4
    pata_atiixp             3633  0
    floppy                 55998  0
    libata                152308  4 pata_acpi,ata_generic,ahci,pata_atiixp
    scsi_mod               92676  4 sg,sr_mod,sd_mod,libata
                 total       used       free     shared    buffers     cached
    Mem:       2056776    1645468     411308          0     590048     414652
    -/+ buffers/cache:     640768    1416008
    Swap:       522072       5776     516296
    success.
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: :: default down    [BUSY]    [DONE]
    success.
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
    success.
    Sa 27. Mär 02:30:56 CET 2010: performing suspend
    Any other useful log files to check out?
    I just put the system to sleep and woke it up again, no problem. I only notice that yesterday it took way longer than usual to go into sleep mode. Except for funky graphic patterns, all worked flawlessy now.
    What could cause bus and io errors after wakeup?
    Last edited by Sadface (2010-03-27 10:55:35)

    Yes, im using systemd. I tried also downgrading xf86-video-intel to a version from some weeks ago, with no result.
    PS: no difference between systemclt suspend or pm-suspend from comand line.ùù
    PS2: I tried fluxbox session and there was no flickering, so it had to be something kde-session related, and I found it: it was the image pile xscreensaver, just switching to another one solved my problem.
    Thanks for your interest, wonderwoofy!
    Update: nothing solved, it was just temporarly by case... same issue as before...
    Last edited by steff (2012-11-09 21:04:39)

  • Suspend to RAM no longer works, even in a console

    I've recently installed Arch on an SSD (OCZ Vertex 2) and I have testing repo enabled.  I can get the laptop to suspend outside of KDE using pm-suspend, but the system never comes back after pressing a key.  The cursor just stays there.  The caps lock key still toggles, but I can't shutdown using the power button.
    In KDE when I close the lid it doesn't do anything. 
    When I first set up KDE suspend worked....I'm not sure what package broke it, but could anyone have any ideas?
    Here are my installed packages:
    a52dec 0.7.4-4
    aalib 1.4rc5-7
    acl 2.2.49-1
    acpi 1.4-2
    acpid 1.0.10-3
    akonadi 1.4.1-1
    akonadi-googledata 1.2.0-1
    alsa-lib 1.0.23-2
    alsa-utils 1.0.23-2
    antlr 2.7.7-8
    apr 1.4.2-1
    apr-util 1.3.10-1
    aria2 1.10.3-1
    aspell 0.60.6-4
    atk 1.32.0-1
    attica 0.1.4-1
    attr 2.4.44-1
    autoconf 2.68-1
    automake 1.11.1-1
    automoc4 0.9.88-1
    avahi 0.6.27-7
    avogadro 1.0.1-1
    babl 0.1.2-1
    bash 4.1.007-1
    beautiful-soup 3.1.0.1-4
    binutils 2.20.1-4
    bison 2.4.3-1
    blas 3.2.2-2
    boost 1.43.0-2
    boost-libs 1.43.0-2
    bzip2 1.0.6-1
    c-ares 1.7.3-1
    ca-certificates 20090814+nmu2-1
    ca-certificates-java 20100412-1
    cabextract 1.3-1
    cairo 1.10.0-2
    cdparanoia 10.2-2
    cfitsio 3.250-2
    cherrypy 3.1.2-3
    chmlib 0.40-1
    chromium 7.0.517.43-1
    cln 1.2.2-3
    cloog-ppl 0.15.9-2
    clucene 0.9.21b-1
    clyde-git 20101027-1
    cmake 2.8.2-3
    compositeproto 0.4.1-1
    consolekit 0.4.2-1
    coreutils 8.6-1
    cracklib 2.8.16-1
    cryptsetup 1.1.3-1
    curl 7.21.2-2
    damageproto 1.2.0-1
    dash 0.5.6.1-1
    db 4.8.26-2
    dbus 1.4.0-1
    dbus-core 1.4.0-1
    dbus-glib 0.86-1
    dbus-python 0.83.1-2
    dcron 4.4-2
    desktop-file-utils 0.16-1
    device-mapper 2.02.74-1
    dhcpcd 5.2.8-1
    dialog 1.1_20100428-2
    diffutils 3.0-1
    dirmngr 1.1.0-1
    djvulibre 3.5.23-1
    dmidecode 2.10-1
    dmxproto 2.3-1
    dnsutils 9.7.1.P2-1
    dri2proto 2.3-1
    e2fsprogs 1.41.12-1
    ebook-tools 0.2.1-1
    eigen 2.0.15-1
    eject 2.1.5-4
    elfutils 0.149-2
    enca 1.13-1
    enchant 1.6.0-1
    ethtool 6-2
    eventlog 0.2.12-1
    exiv2 0.20-1
    expat 2.0.1-5
    faac 1.28-2
    faad2 2.7-1
    fakeroot 1.14.4-2
    farsight2 0.0.21-2
    ffmpeg 25472-1
    fftw 3.2.2-1
    file 5.04-2
    filesystem 2010.10-1
    findutils 4.4.2-2
    fixesproto 4.1.1-1
    flac 1.2.1-2
    flashplugin-prerelease 10.2.161.23-1
    flex 2.5.35-4
    fluidsynth 1.1.3-1
    fontconfig 2.8.0-1
    fontsproto 2.1.0-1
    freeglut 2.6.0-1
    freetype2 2.4.3-1
    fribidi 0.19.2-1
    gawk 3.1.8-1
    gcc 4.5.1-1
    gcc-libs 4.5.1-1
    gconf 2.32.0-1
    gdbm 1.8.3-7
    gdk-pixbuf2 2.22.0-2
    gegl 0.1.2-1
    gen-init-cpio 2.6.32-1
    gettext 0.18.1.1-1
    ggz-client-libs 0.0.14.1-1
    ghostscript 9.00-1
    giflib 4.1.6-3
    gimp 2.6.11-1
    git 1.7.3.2-1
    glew 1.5.6-1
    glib2 2.26.0-2
    glibc 2.12.1-4
    glproto 1.4.12-1
    gmp 5.0.1-1
    gnugo 3.8-1
    gnupg 1.4.11-1
    gnupg2 2.0.16-2
    gnutls 2.8.6-1
    gobject-introspection 0.9.12-1
    gpgme 1.3.0-1
    gpm 1.20.6-5
    gpsd 2.95-4
    grep 2.7-1
    groff 1.20.1-4
    grub 0.97-17
    gsfonts 1.0.7pre44-2
    gsl 1.14-1
    gstreamer0.10 0.10.30-1
    gstreamer0.10-base 0.10.30-1
    gstreamer0.10-base-plugins 0.10.30-1
    gstreamer0.10-python 0.10.18-3
    gtk2 2.22.0-5
    gzip 1.4-1
    hal 0.5.14-4
    hal-info 0.20091130-1
    heimdal 1.3.3-1
    hicolor-icon-theme 0.12-1
    htop 0.8.3-1
    huludesktop 0.9.8-3
    hunspell 1.2.12-1
    iana-etc 2.30-1
    ilmbase 1.0.1-1
    imagemagick 6.6.4.10-1
    imlib2 1.4.4-1
    initscripts 2010.07-1
    inputproto 2.0-1
    intel-dri 7.9-1
    iputils 20100214-2
    iso-codes 3.14-1
    jack 0.118.0-4
    jasper 1.900.1-6
    jfsutils 1.1.14-1
    kbd 1.15.2-1
    kbproto 1.0.5-1
    kde-agent 20090801-2
    kdeaccessibility-colorschemes 4.5.2-1
    kdeaccessibility-iconthemes 4.5.2-1
    kdeaccessibility-kmag 4.5.2-1
    kdeaccessibility-kmousetool 4.5.2-1
    kdeaccessibility-kmouth 4.5.2-1
    kdeadmin-kcron 4.5.2-1
    kdeadmin-ksystemlog 4.5.2-1
    kdeadmin-kuser 4.5.2-1
    kdeadmin-system-config-printer-kde 4.5.2-1
    kdeartwork-aurorae 4.5.2-1
    kdeartwork-colorschemes 4.5.2-1
    kdeartwork-desktopthemes 4.5.2-1
    kdeartwork-emoticons 4.5.2-1
    kdeartwork-iconthemes 4.5.2-1
    kdeartwork-kscreensaver 4.5.2-1
    kdeartwork-sounds 4.5.2-1
    kdeartwork-styles 4.5.2-1
    kdeartwork-wallpapers 4.5.2-1
    kdeartwork-weatherwallpapers 4.5.2-1
    kdebase-dolphin 4.5.2-1
    kdebase-kdepasswd 4.5.2-1
    kdebase-kdialog 4.5.2-1
    kdebase-kfind 4.5.2-1
    kdebase-konqueror 4.5.2-1
    kdebase-konsole 4.5.2-1
    kdebase-kwrite 4.5.2-1
    kdebase-lib 4.5.2-1
    kdebase-plasma 4.5.2-1
    kdebase-runtime 4.5.2-2
    kdebase-workspace 4.5.2-2
    kdebindings-python 4.5.2-8
    kdeedu-blinken 4.5.2-2
    kdeedu-cantor 4.5.2-2
    kdeedu-data 4.5.2-2
    kdeedu-kalgebra 4.5.2-2
    kdeedu-kalzium 4.5.2-2
    kdeedu-kanagram 4.5.2-2
    kdeedu-kbruch 4.5.2-2
    kdeedu-kgeography 4.5.2-2
    kdeedu-khangman 4.5.2-2
    kdeedu-kig 4.5.2-2
    kdeedu-kiten 4.5.2-2
    kdeedu-klettres 4.5.2-2
    kdeedu-kmplot 4.5.2-2
    kdeedu-kstars 4.5.2-2
    kdeedu-ktouch 4.5.2-2
    kdeedu-kturtle 4.5.2-2
    kdeedu-kwordquiz 4.5.2-2
    kdeedu-libkdeedu 4.5.2-2
    kdeedu-marble 4.5.2-2
    kdeedu-parley 4.5.2-2
    kdeedu-rocs 4.5.2-2
    kdeedu-step 4.5.2-2
    kdegames-bomber 4.5.2-1
    kdegames-bovo 4.5.2-1
    kdegames-granatier 4.5.2-1
    kdegames-kajongg 4.5.2-1
    kdegames-kapman 4.5.2-1
    kdegames-katomic 4.5.2-1
    kdegames-kbattleship 4.5.2-1
    kdegames-kblackbox 4.5.2-1
    kdegames-kblocks 4.5.2-1
    kdegames-kbounce 4.5.2-1
    kdegames-kbreakout 4.5.2-1
    kdegames-kdiamond 4.5.2-1
    kdegames-kfourinline 4.5.2-1
    kdegames-kgoldrunner 4.5.2-1
    kdegames-kigo 4.5.2-1
    kdegames-killbots 4.5.2-1
    kdegames-kiriki 4.5.2-1
    kdegames-kjumpingcube 4.5.2-1
    kdegames-klines 4.5.2-1
    kdegames-kmahjongg 4.5.2-1
    kdegames-kmines 4.5.2-1
    kdegames-knetwalk 4.5.2-1
    kdegames-kolf 4.5.2-1
    kdegames-kollision 4.5.2-1
    kdegames-konquest 4.5.2-1
    kdegames-kpatience 4.5.2-1
    kdegames-kreversi 4.5.2-1
    kdegames-ksame 4.5.2-1
    kdegames-kshisen 4.5.2-1
    kdegames-ksirk 4.5.2-1
    kdegames-kspaceduel 4.5.2-1
    kdegames-ksquares 4.5.2-1
    kdegames-ksudoku 4.5.2-1
    kdegames-ktron 4.5.2-1
    kdegames-ktuberling 4.5.2-1
    kdegames-kubrick 4.5.2-1
    kdegames-libkdegames 4.5.2-1
    kdegames-libkmahjongg 4.5.2-1
    kdegames-lskat 4.5.2-1
    kdegames-palapeli 4.5.2-1
    kdegraphics-gwenview 4.5.2-2
    kdegraphics-kamera 4.5.2-2
    kdegraphics-kcolorchooser 4.5.2-2
    kdegraphics-kgamma 4.5.2-2
    kdegraphics-kolourpaint 4.5.2-2
    kdegraphics-kruler 4.5.2-2
    kdegraphics-ksnapshot 4.5.2-2
    kdegraphics-libs 4.5.2-2
    kdegraphics-okular 4.5.2-2
    kdelibs 4.5.2-2
    kdemultimedia-dragonplayer 4.5.2-1
    kdemultimedia-ffmpegthumbs 4.5.2-1
    kdemultimedia-juk 4.5.2-1
    kdemultimedia-kioslave 4.5.2-1
    kdemultimedia-kmix 4.5.2-1
    kdemultimedia-kscd 4.5.2-1
    kdemultimedia-mplayerthumbs 4.5.2-1
    kdenetwork-filesharing 4.5.2-1
    kdenetwork-kdnssd 4.5.2-1
    kdenetwork-kget 4.5.2-1
    kdenetwork-kopete 4.5.2-1
    kdenetwork-kppp 4.5.2-1
    kdenetwork-krdc 4.5.2-1
    kdenetwork-krfb 4.5.2-1
    kdepim-akonadiconsole 4.4.7-1
    kdepim-akregator 4.4.7-1
    kdepim-blogilo 4.4.7-1
    kdepim-console 4.4.7-1
    kdepim-kaddressbook 4.4.7-1
    kdepim-kalarm 4.4.7-1
    kdepim-kjots 4.4.7-1
    kdepim-kleopatra 4.4.7-1
    kdepim-kmail 4.4.7-1
    kdepim-knode 4.4.7-1
    kdepim-knotes 4.4.7-1
    kdepim-kontact 4.4.7-1
    kdepim-korganizer 4.4.7-1
    kdepim-kresources 4.4.7-1
    kdepim-ktimetracker 4.4.7-1
    kdepim-libkdepim 4.4.7-1
    kdepim-runtime 4.4.7-1
    kdepim-wizards 4.4.7-1
    kdepimlibs 4.5.2-1
    kdeplasma-addons-applets-bball 4.5.2-1
    kdeplasma-addons-applets-binary-clock 4.5.2-1
    kdeplasma-addons-applets-blackboard 4.5.2-1
    kdeplasma-addons-applets-bookmarks 4.5.2-1
    kdeplasma-addons-applets-bubblemon 4.5.2-1
    kdeplasma-addons-applets-calculator 4.5.2-1
    kdeplasma-addons-applets-charselect 4.5.2-1
    kdeplasma-addons-applets-comic 4.5.2-1
    kdeplasma-addons-applets-community 4.5.2-1
    kdeplasma-addons-applets-dict 4.5.2-1
    kdeplasma-addons-applets-eyes 4.5.2-1
    kdeplasma-addons-applets-fifteenpuzzle 4.5.2-1
    kdeplasma-addons-applets-filewatcher 4.5.2-1
    kdeplasma-addons-applets-frame 4.5.2-1
    kdeplasma-addons-applets-fuzzy-clock 4.5.2-1
    kdeplasma-addons-applets-incomingmsg 4.5.2-1
    kdeplasma-addons-applets-kdeobservatory 4.5.2-1
    kdeplasma-addons-applets-kimpanel 4.5.2-1
    kdeplasma-addons-applets-knowledgebase 4.5.2-1
    kdeplasma-addons-applets-kolourpicker 4.5.2-1
    kdeplasma-addons-applets-konqprofiles 4.5.2-1
    kdeplasma-addons-applets-konsoleprofiles 4.5.2-1
    kdeplasma-addons-applets-lancelot 4.5.2-1
    kdeplasma-addons-applets-leavenote 4.5.2-1
    kdeplasma-addons-applets-life 4.5.2-1
    kdeplasma-addons-applets-luna 4.5.2-1
    kdeplasma-addons-applets-magnifique 4.5.2-1
    kdeplasma-addons-applets-mediaplayer 4.5.2-1
    kdeplasma-addons-applets-microblog 4.5.2-1
    kdeplasma-addons-applets-news 4.5.2-1
    kdeplasma-addons-applets-notes 4.5.2-1
    kdeplasma-addons-applets-nowplaying 4.5.2-1
    kdeplasma-addons-applets-paste 4.5.2-1
    kdeplasma-addons-applets-pastebin 4.5.2-1
    kdeplasma-addons-applets-plasmaboard 4.5.2-1
    kdeplasma-addons-applets-previewer 4.5.2-1
    kdeplasma-addons-applets-qalculate 4.5.2-1
    kdeplasma-addons-applets-rememberthemilk 4.5.2-1
    kdeplasma-addons-applets-rssnow 4.5.2-1
    kdeplasma-addons-applets-showdashboard 4.5.2-1
    kdeplasma-addons-applets-showdesktop 4.5.2-1
    kdeplasma-addons-applets-social-news 4.5.2-1
    kdeplasma-addons-applets-spellcheck 4.5.2-1
    kdeplasma-addons-applets-systemloadviewer 4.5.2-1
    kdeplasma-addons-applets-timer 4.5.2-1
    kdeplasma-addons-applets-unitconverter 4.5.2-1
    kdeplasma-addons-applets-weather 4.5.2-1
    kdeplasma-addons-applets-weatherstation 4.5.2-1
    kdeplasma-addons-applets-webslice 4.5.2-1
    kdeplasma-addons-libs 4.5.2-1
    kdeplasma-addons-runners-audioplayercontrol 4.5.2-1
    kdeplasma-addons-runners-browserhistory 4.5.2-1
    kdeplasma-addons-runners-characters 4.5.2-1
    kdeplasma-addons-runners-contacts 4.5.2-1
    kdeplasma-addons-runners-converter 4.5.2-1
    kdeplasma-addons-runners-datetime 4.5.2-1
    kdeplasma-addons-runners-katesessions 4.5.2-1
    kdeplasma-addons-runners-konquerorsessions 4.5.2-1
    kdeplasma-addons-runners-konsolesessions 4.5.2-1
    kdeplasma-addons-runners-kopete 4.5.2-1
    kdeplasma-addons-runners-mediawiki 4.5.2-1
    kdeplasma-addons-runners-spellchecker 4.5.2-1
    kdeplasma-addons-wallpapers-mandelbrot 4.5.2-1
    kdeplasma-addons-wallpapers-marble 4.5.2-1
    kdeplasma-addons-wallpapers-pattern 4.5.2-1
    kdeplasma-addons-wallpapers-virus 4.5.2-1
    kdeplasma-addons-wallpapers-weather 4.5.2-1
    kdesdk-cervisia 4.5.2-1
    kdesdk-dolphin-plugins 4.5.2-1
    kdesdk-kapptemplate 4.5.2-1
    kdesdk-kate 4.5.2-1
    kdesdk-kbugbuster 4.5.2-1
    kdesdk-kcachegrind 4.5.2-1
    kdesdk-kdeaccounts-plugin 4.5.2-1
    kdesdk-kdepalettes 4.5.2-1
    kdesdk-kioslave 4.5.2-1
    kdesdk-kmtrace 4.5.2-1
    kdesdk-kompare 4.5.2-1
    kdesdk-kpartloader 4.5.2-1
    kdesdk-kprofilemethod 4.5.2-1
    kdesdk-kstartperf 4.5.2-1
    kdesdk-kuiviewer 4.5.2-1
    kdesdk-lokalize 4.5.2-1
    kdesdk-poxml 4.5.2-1
    kdesdk-scripts 4.5.2-1
    kdesdk-strigi-analyzer 4.5.2-1
    kdesdk-umbrello 4.5.2-1
    kdetoys-amor 4.5.2-1
    kdetoys-kteatime 4.5.2-1
    kdetoys-ktux 4.5.2-1
    kdeutils-ark 4.5.2-2
    kdeutils-kcalc 4.5.2-2
    kdeutils-kcharselect 4.5.2-2
    kdeutils-kdf 4.5.2-2
    kdeutils-kfloppy 4.5.2-2
    kdeutils-kgpg 4.5.2-2
    kdeutils-kremotecontrol 4.5.2-2
    kdeutils-ktimer 4.5.2-2
    kdeutils-kwallet 4.5.2-2
    kdeutils-okteta 4.5.2-2
    kdeutils-printer-applet 4.5.2-2
    kdeutils-superkaramba 4.5.2-2
    kdeutils-sweeper 4.5.2-2
    kdewebdev-kfilereplace 4.5.2-1
    kdewebdev-kimagemapeditor 4.5.2-1
    kdewebdev-klinkstatus 4.5.2-1
    kdewebdev-kommander 4.5.2-1
    kernel26 2.6.35.7-1
    kernel26-headers 2.6.35.7-1
    ksplash-theme-generator 0.4-1
    kwebkitpart 0.9.6-1
    lame 3.98.4-1
    lapack 3.2.2-2
    lcms 1.19-1
    less 436-1
    lesstif 0.95.2-2
    lib32-alsa-lib 1.0.23-4
    lib32-expat 2.0.1-7
    lib32-fontconfig 2.8.0-3
    lib32-freetype2 2.4.3-1
    lib32-gcc-libs 4.5.1-7
    lib32-glibc 2.12.1-7
    lib32-libdrm 2.4.21-4
    lib32-libgl 7.8.2-5
    lib32-libice 1.0.6-3
    lib32-libsm 1.1.1-3
    lib32-libx11 1.3.5-2
    lib32-libxau 1.0.6-2
    lib32-libxcb 1.7-2
    lib32-libxcursor 1.1.10-3
    lib32-libxdamage 1.1.3-3
    lib32-libxdmcp 1.0.3-4
    lib32-libxext 1.1.2-3
    lib32-libxfixes 4.0.5-3
    lib32-libxrandr 1.3.0-3
    lib32-libxrender 0.9.6-4
    lib32-libxt 1.0.8-3
    lib32-libxxf86dga 1.1.1-3
    lib32-libxxf86vm 1.1.0-3
    lib32-mesa 7.8.2-5
    lib32-util-linux-ng 2.18-3
    lib32-zlib 1.2.5-5
    libao 1.0.0-2
    libarchive 2.8.4-2
    libass 0.9.11-1
    libassuan 2.0.1-1
    libcaca 0.99.beta17-1
    libcap 2.19-1
    libcddb 1.3.2-2
    libcdio 0.82-1
    libcroco 0.6.2-1
    libcups 1.4.4-3
    libdaemon 0.14-1
    libdatrie 0.2.4-1
    libdbusmenu-qt 0.6.4-1
    libdca 0.0.5-2
    libdmx 1.1.0-1
    libdrm 2.4.22-1
    libdvbpsi 0.1.7-1
    libdvdnav 4.1.3-2
    libdvdread 4.1.3-2
    libebml 1.0.0-1
    libevent 1.4.14b-2
    libexif 0.6.19-1
    libfetch 2.33-1
    libffi 3.0.9-1
    libfontenc 1.1.0-1
    libftdi 0.18-1
    libgadu 1.9.1-1
    libgcal 0.9.6-1
    libgcrypt 1.4.6-1
    libggz 0.0.14.1-1
    libgl 7.9-1
    libglade 2.6.4-2
    libgpg-error 1.9-2
    libgphoto2 2.4.9-1
    libgssglue 0.1-2
    libical 0.46-1
    libice 1.0.7-1
    libid3tag 0.15.1b-6
    libidl2 0.8.14-1
    libidn 1.19-1
    libieee1284 0.2.11-3
    libindi 0.6.2-1
    libiodbc 3.52.7-4
    libjpeg 8.0.2-1
    libksba 1.0.8-1
    libktorrent 1.0.4-1
    libldap 2.4.23-1
    libmad 0.15.1b-4
    libmatroska 1.0.0-1
    libmng 1.0.10-3
    libmodplug 0.8.8.1-1
    libmp4v2 1.9.1-1
    libmpc 0.8.2-2
    libmpcdec 1.2.6-2
    libmpeg2 0.5.1-1
    libmsn 4.1-2
    libmtp 1.0.2-1
    libmysqlclient 5.1.51-1
    libnice 0.0.13-3
    libnl 1.1-2
    libnova 0.13.0-1
    libofa 0.9.3-2
    libogg 1.2.0-1
    libotr 3.2.0-1
    libpcap 1.1.1-1
    libpciaccess 0.12.0-1
    libpng 1.4.4-1
    libproxy 0.4.6-2
    libqalculate 0.9.7-1
    libraw1394 2.0.5-1
    librpcsecgss 0.19-3
    librsvg 2.32.0-2
    libsamplerate 0.1.7-1
    libsasl 2.1.23-4
    libshout 2.2.2-3
    libsm 1.1.1-1
    libsndfile 1.0.23-1
    libspectre 0.2.6-2
    libssh 0.4.6-1
    libtasn1 2.6-1
    libthai 0.1.14-1
    libtheora 1.1.1-1
    libtiff 3.9.4-1
    libtirpc 0.2.1-1
    libtool 2.4-1
    libusb 0.1.12-4
    libusb1 1.0.8-1
    libva 1.0.5-2
    libvdpau 0.4-1
    libvisual 0.4.0-3
    libvncserver 0.9.7-3
    libvorbis 1.3.1-1
    libvpx 0.9.2-1
    libwmf 0.2.8.4-8
    libx11 1.3.5-1
    libx86 1.1-2
    libxau 1.0.6-1
    libxaw 1.0.8-1
    libxcb 1.7-1
    libxcomposite 0.4.2-1
    libxcursor 1.1.10-1
    libxdamage 1.1.3-1
    libxdmcp 1.0.3-1
    libxext 1.1.2-1
    libxfixes 4.0.5-1
    libxfont 1.4.2-2
    libxft 2.1.14-1
    libxi 1.3.2-1
    libxinerama 1.1-1
    libxkbfile 1.0.6-1
    libxklavier 5.0-1
    libxml2 2.7.7-2
    libxmu 1.0.5-1
    libxp 1.0.0-3
    libxpm 3.5.8-1
    libxrandr 1.3.0-1
    libxrender 0.9.6-1
    libxslt 1.1.26-2
    libxss 1.2.0-1
    libxt 1.0.8-1
    libxtst 1.1.0-1
    libxv 1.0.5-1
    libxvmc 1.0.6-1
    libxxf86dga 1.1.1-1
    libxxf86vm 1.1.0-1
    libzip 0.9.3-1
    licenses 2.6-1
    linux-api-headers 2.6.34-1
    linux-firmware 20100911-1
    lirc-utils 0.8.6-5
    lm_sensors 3.2.0-1
    logrotate 3.7.9-1
    lua 5.1.4-6
    lua-lzlib 0.4_work2-4
    lua-yajl-git 20100308-1
    luafilesystem 1.5.0-1
    luasec 0.4-2
    luasocket 2.0.2-3
    lvm2 2.02.74-1
    lzo2 2.03-1
    m4 1.4.15-1
    mailx 8.1.1-7
    make 3.82-2
    man-db 2.5.7-1
    man-pages 3.29-1
    mcpp 2.7.2-2
    mdadm 3.1.4-1
    mesa-demos 8.0.1-1
    mkinitcpio 0.6.7-1
    mkinitcpio-busybox 1.17.2-1
    mlocate 0.23.1-2
    module-init-tools 3.12-1
    mozilla-common 1.4-1
    mpfr 3.0.0.p4-1
    mplayer 32492-2
    musicbrainz 2.1.5-4
    mysql 5.1.51-1
    mysql-clients 5.1.51-1
    nano 2.2.5-1
    ncurses 5.7-3
    neon 0.29.3-2
    net-tools 1.60-14
    nfs-utils 1.2.2-3
    nfsidmap 0.23-3
    nickle 2.70-1
    nspr 4.8.6-1
    nss 3.12.8-1
    openbabel 2.2.3-1
    opencore-amr 0.1.2-1
    openexr 1.6.1-1
    openjdk6 6.b20_1.9.1-1
    openjpeg 1.3-3
    openssh 5.6p1-1
    openssl 1.0.0.a-3
    openvpn 2.1.3-1
    orbit2 2.14.19-1
    orc 0.4.7-1
    oss 4.2_2003-1
    oxygen-icons 4.5.2-1
    package-query 0.4-1
    pacman 3.4.1-1
    pacman-mirrorlist 20100825-1
    pam 1.1.1-1
    pango 1.28.3-1
    patch 2.6.1-1
    pciutils 3.1.7-1
    pcmciautils 017-1
    pcre 8.10-1
    perl 5.12.1-2
    perl-error 0.17016-1
    perl-html-parser 3.66-1
    perl-html-tagset 3.20-1
    perl-libwww 5.836-1
    perl-uri 1.54-1
    perl-xyne-arch 2010.10.09.1-1
    perl-xyne-common 2010.10.09.1-1
    phonon 4.4.2-2
    phonon-gstreamer 4.4.2-2
    phoronix-test-suite 2.8.1-1
    php 5.3.3-2
    pinentry 0.8.0-2
    pixman 0.18.4-1
    pkg-config 0.25-2
    pm-quirks 0.20100619-1
    pm-utils 1.4.0-1
    podofo 0.8.4-1
    polkit 0.98-1
    polkit-kde 0.95.1-2
    polkit-qt 0.96.1-3
    poppler 0.14.4-1
    poppler-data 0.4.3-1
    poppler-qt 0.14.4-1
    popt 1.16-2
    postgresql-libs 9.0.1-2
    powerpill 2010.08.24.1-1
    ppl 0.11-1
    ppp 2.4.5-1
    printproto 1.0.4-2
    procps 3.2.8-1
    psmisc 22.13-1
    pth 2.0.7-3
    pycairo 1.8.10-2
    pycrypto 2.3-1
    pycups 1.9.51-2
    pygobject 2.26.0-2
    pygtk 2.22.0-3
    pyqt 4.8.0-1
    pysmbc 1.0.9-1
    python-dateutil 1.5-2
    python-dnspython 1.8.0-2
    python-imaging 1.1.7-2
    python-lxml 2.2.8-2
    python-mechanize 0.2.2-2
    python-numpy 1.5.0-2
    python-pypdf 1.12-5
    python-urwid 0.9.9.1-2
    python2 2.7-2
    qca 2.0.2-2
    qca-ossl 2.0.0-3
    qimageblitz 0.0.6-1
    qscintilla 2.4.5-4
    qt 4.7.0-4
    qwt 5.2.1-1
    randrproto 1.3.1-1
    raptor 1.4.21-1
    rarian 0.8.1-1
    rasqal 0.9.20-1
    rdesktop 1.6.0-5
    readline 6.1.002-1
    recode 3.6-5
    recordproto 1.14-1
    redland 1.0.12-1
    reiserfsprogs 3.6.21-2
    renderproto 0.11.1-1
    rp-pppoe 3.10-5
    rpcbind 0.2.0-2
    rrdtool 1.4.4-2
    run-parts 3.4.1-1
    sane 1.0.21-3
    schroedinger 1.0.9-1
    scrnsaverproto 1.2.0-1
    sdl 1.2.14-5
    sdl_image 1.2.10-2
    sed 4.2.1-2
    shadow 4.1.4.2-3
    shared-desktop-ontologies 0.5-1
    shared-mime-info 0.80-1
    sip 4.11.2-1
    smbclient 3.5.6-1
    soprano 2.5.2-1
    speex 1.2rc1-1
    sqlite3 3.7.3-1
    stdin-plasmoid-svn 0.2r32-1
    strigi 0.7.2-3
    subversion 1.6.9-6
    sudo 1.7.4.p4-1
    sysfsutils 2.1.0-5
    syslog-ng 3.1.2-1
    system-config-printer-common 1.2.5-3
    sysvinit 2.88-2
    taglib 1.6.3-1
    talloc 2.0.1-1
    tar 1.23-3
    tcp_wrappers 7.6-12
    tdb 1.2.1-2
    telepathy-farsight 0.0.15-2
    telepathy-glib 0.12.2-1
    telepathy-qt4 0.3.5-1
    texinfo 4.13a-4
    tidyhtml 1.46-1
    ttf-dejavu 2.30-2
    ttf-freefont 20090104-2
    ttf-ms-fonts 2.0-3
    tunepimp 0.5.3-8
    twisted 10.1.0-1
    tzdata 2010n-1
    udev 163-1
    unixodbc 2.3.0-1
    unrar 3.9.10-1
    unzip 6.0-5
    usbutils 0.90-1
    util-linux-ng 2.18-3
    v4l-utils 0.8.1-1
    vbetool 1.1-1
    vi 050325-3
    videoproto 2.3.1-1
    vim 7.3.3-2
    vim-colorsamplerpack 8.03-2
    vim-runtime 7.3.3-2
    virtualbox_bin 3.2.10-2
    virtuoso 6.1.2-1
    vlc 1.1.4.1-2
    wget 1.12-2
    which 2.20-3
    wicd 1.7.0-6
    wine 1.3.5-1
    wireless_tools 29-3
    wpa_supplicant 0.7.3-1
    x264 20101013-1
    xbitmaps 1.1.0-1
    xcb-proto 1.6-2
    xcb-util 0.3.6-1
    xdg-utils 1.0.2.20100618-1
    xextproto 7.1.2-1
    xf86-input-evdev 2.5.0-1
    xf86-input-keyboard 1.4.0-3
    xf86-input-mouse 1.6.0-1
    xf86-input-synaptics 1.3.0-1
    xf86-video-intel 2.13.0-4
    xf86-video-vesa 2.3.0-3
    xf86dgaproto 2.1-1
    xf86vidmodeproto 2.3-1
    xfsprogs 3.1.3-1
    xineramaproto 1.2-1
    xkeyboard-config 2.0-1
    xorg-docs 1.5-1
    xorg-font-utils 7.5-2
    xorg-fonts-100dpi 1.0.1-3
    xorg-fonts-75dpi 1.0.1-3
    xorg-fonts-alias 1.0.2-1
    xorg-fonts-encodings 1.0.3-1
    xorg-fonts-misc 1.0.1-1
    xorg-iceauth 1.0.3-1
    xorg-luit 1.1.0-1
    xorg-res-utils 1.0.3-3
    xorg-server 1.9.0.901-2
    xorg-server-common 1.9.0.901-2
    xorg-server-utils 7.6-1
    xorg-sessreg 1.0.6-1
    xorg-twm 1.0.4-3
    xorg-utils 7.6-5
    xorg-xauth 1.0.4-1
    xorg-xbacklight 1.1.1-1
    xorg-xcmsdb 1.0.3-1
    xorg-xgamma 1.0.3-1
    xorg-xhost 1.0.3-1
    xorg-xinit 1.2.1-1
    xorg-xinput 1.5.2-1
    xorg-xkb-utils 7.5-2
    xorg-xmodmap 1.0.5-1
    xorg-xrandr 1.3.3-1
    xorg-xrdb 1.0.6-1
    xorg-xrefresh 1.0.3-1
    xorg-xset 1.2.0-1
    xorg-xsetroot 1.0.3-1
    xproto 7.0.18-1
    xterm 266-1
    xvidcore 1.2.2-1
    xz 5.0.0-1
    yajl 1.0.9-3
    yaourt 0.9.5-1
    zlib 1.2.5-2
    zope-interface 3.5.3-2
    zvbi 0.2.33-2
    Last edited by DarksideEE7 (2010-10-28 16:29:14)

    Could it be that I don't have a swap file?  Surely not....I have 4GB of memory and I've never had problems with suspend in the past. 
    I was able to get it to suspend while in KDE using pm-suspend while in konsole and all of the console screens were black, with the exception of tty7, which had konsole up (without any window decoration).  I wasn't able to execute any commands (including shutdown), nor could I su - to root. 
    This happened a second time, and it mentioned that it was enable to mount  sda2 (which is my route partition)  Any ideas on how to fix this?  I NEED suspend. 
    Other than that I'm getting great performance, especially with my fstab options set in place.
    Last edited by DarksideEE7 (2010-10-28 23:40:08)

  • I want to program iPhone applications, want to start learning from scratch. Where do I start?

    I have wanted to program for a long time and now I have a mac I want to begin on the wright track. Which language should I start learning and what others will I need in the future? I started learning c++ awhile back but wasn't sure if it was the right language for iPhone development so stopped till I could afford a mac as I couldn't be an iPhone programmer without a mac anyway. Any advice to put me on the right track would be brilliant and much appreciated. Also I heard learning design is a major aspect, when should I learn this or should it just be picked up through learning a language. And I should add I don't want to go to college or university as I am doing this as something ontop of my full time job. Thanks

    iPhone Developer Beginner Resource Guide
    ...and I hope you're still not using 10.4.11 - Snow Leopard is minimum now.

  • Suspend to RAM with KMS enabled and ATI Radeon XPRESS 200M

    Per this thread, I added the file to /etc/X11/xorg.conf.d to disable glx in order to continue booting with 'nomodeset' to disable KMS after today's updates.  I've always had to boot with 'nomodeset' so that suspend/resume will work properly (I get a black screen/freeze on resume from suspend to ram). However, with this fix, my screen redraws are happening MUCH slower than before the update. Anyone have KMS enabled AND suspend/resume working with an:  ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)?
    Thanks,
    Scott
    Last edited by firecat53 (2010-11-26 18:40:22)

    Ok, sorry for a delay -- long weekend...
    Suspend + KMS have been working starting sometimes in the 2.6.35 series.
    My guess as to why you can't suspend, is your BIOS/motherboard, nothing else.
    Anyway, here is the info:
    ~$ /usr/sbin/lspci
    00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
    00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
    00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
    00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
    00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
    00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
    00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
    00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
    00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
    00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
    00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    05:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
    05:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
    ~$ head /var/log/pm-suspend.log
    Initial commandline parameters: --quirk-dpms-suspend
    --quirk-dpms-on
    --quirk-vbestate-restore
    --quirk-vbemode-restore
    --quirk-vga-mode3
    --quirk-vbe-post
    Tue Nov 30 19:58:21 EST 2010: Running hooks for suspend.
    Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
    Linux bluemoon 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 06:44:11 UTC 2010 i686 Mobile AMD Sempron(tm) Processor 3000+ AuthenticAMD GNU/Linux
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
    :: wlan_wpa_supplicant down [BUSY] [DONE]
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
    Unloading kernel module b43...Done.
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    kernel.acpi_video_flags = 0
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Tue Nov 30 19:58:24 EST 2010: performing suspend
    Tue Nov 30 20:57:03 EST 2010: Awake.
    Tue Nov 30 20:57:03 EST 2010: Running hooks for resume
    Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
    /usr/lib/pm-utils/sleep.d/95led resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
    Reloaded unloaded modules.
    /usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
    :: wlan_wpa_supplicant up [BUSY] [DONE]
    /usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    Tue Nov 30 20:57:20 EST 2010: Finished.
    Kernel command line: root=/dev/disk/by-uuid/8d834d14-8413-481a-9f69-3fd20dc25773 ro radeon.modeset=1
    ~$ pacman -Q xf86-video-ati
    xf86-video-ati 6.13.2-2
    ~$ cat /etc/X11/xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    EndSection
    Section "ServerFlags"
    Option "DontZap" "on"
    EndSection
    Section "Monitor"
    Identifier "LCD Panel"
    EndSection
    Section "Device"
    Identifier "Radeon XPress 200M"
    Driver "radeon"
    Option "EnablePageFlip" "on"
    Option "EXAPixmaps" "on"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Radeon XPress 200M"
    Monitor "LCD Panel"
    EndSection

Maybe you are looking for

  • LR 5.7 - won't update. Error 404

    I have LR 5.7 on a windows 64 bit architecture machine, running windows 8.1 pro. My LR is bought & properly registered.    Opening it tells me the latest updates are availabe (no doubt something to do with the new LR CC) I am diected to Digital photo

  • Is there a BUG in Aurora under solaris 5.8?

    Mr Ravi is Aurora module certified for solaris 5.8 ? i put the maximum values for java_soft_sessionspace_limit and java_max_sessionspace_size (2147483647 for both) and i still get the Aurora Assertion failure at eox.c:187 we really need to use oracle

  • MobileMe publishing issue

    Hello there, my Aperture is publishing my galleries at homepage.mac.com/membername instead of the new MobileMe Gallery address (gallery.me.com/membername). Any ideas of why and how to fix it? In Aperture preferences there's no option to switch betwee

  • Ipad mail issues....

    Hi all, I have been using my ipad Mail account for two different hotmail accounts and an academic one too. Only issue is I can't seem to be able to create sub folders on my ipad. Does anyone know how you can do this? Doing it on my academic account (

  • LR2 - multiple image exif doesn't work, in Grid View

    In Grid View, I need to place the same information in EXIF Label and Caption fields in multiple selected images. It doesn't matter if I select them all first and then type the information, or enter it into one image, select the others, and then paste