Start-up issue HELP ME PLEASE! ASAP
At start up computer goes to blue screen that says:
Esc=boot menu> F1=Setup>F10=system recovery>
Than immediately goes to a black screen that says:
Reboot and select proper Boot device
Or insert Boot Media in selected Boot device and press a key_
I pressed f1 n looked to see if a hardware was detected n in second channel device 1: it says WDC WD800BBect. So I'm assuming it detects a hardware. Idk I saw that on up website I'm confused n not computer programmer need assistance asap. Please help me
Here is what I would do if I were you:
I have seen one or two of these types of errors get resolved by ...
- unplugging the power cord
,-pressing the power button on the pc for 5 seconds while the computer is already off
- opening the case and unplugging the hard drive power and IDE/SATA cables
- Reconnecting power and turning it on and wait for an error to appear.
- turn off
-unplug power cord
- reconnect cables to the hard drive
- reconnect power
- turn on and hope for the best.
- if it magically works again, replace side panel... make sure to create a set of recovery discs.
More than likely though, you will either need to reformat the hard drive (if you can access it) or replace it. Either way, if you want to keep your computer and you need to restore/replace the hard drive - you will need HP recovery discs to get the original software build on the PC. Alternatively, you could install a fresh operating system that meets its minimum system requirements.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.
Similar Messages
-
Too large java heap error while starting the domain.Help me please..
I am using weblogic 10.2,after creating the domain, while starting the domain,I am getting this error.Can anyone help me.Please treat this as urgent request..
<Oct 10, 2009 4:09:24 PM> <Info> <NodeManager> <Server output log file is "/nfs/appl/XXXXX/weblogic/XXXXX_admin/servers/XXXXX_admin_server/logs/XXXXX_admin_server.out">
[ERROR] Too large java heap setting.
Try to reduce the Java heap size using -Xmx:<size> (e.g. "-Xmx128m").
You can also try to free low memory by disabling
compressed references, -XXcompressedRefs=false.
Could not create the Java virtual machine.
<Oct 10, 2009 4:09:25 PM> <Debug> <NodeManager> <Waiting for the process to die: 29643>
<Oct 10, 2009 4:09:25 PM> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<Oct 10, 2009 4:09:25 PM> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>Thanks Kevin.
Let me try that.
Already more than 8 domains were successfully created and running fine.Now the newly created domain have this problem.I need 1GB for my domain.Is there any way to do this? -
Hi we've had a lynksys wireless BEFW11S4 for some time. The computer im on at the moment and our laptop are running fine wireless, but we now have another computer which doesn't have a wireless network card, but ive connected directly to the router and it still doesn't work. Ive tried to set up a new connection to o avail what am i doing wrong. Also tried connecting to a small home network and the computer doesn't even register as its own workgroup computer? That might not make sence but if it does please help.
make sure that when you connect your pc to the router, the correct port on the router will lit up. if not, try changing cables. if it lights up, check your IP address. do it by going the DOS prompt (start>>run>>type "cmd" or "command" then click ok). on the dos window, type "ipconfig". you should get an IP address with the range of "192.168.1.xx". if not, reply again to this thread.
-
I need TECHNICAL SUPPORT ASAP PLEASE.
My phone is locked -accidentally
The Find my phone is disabled - I think.
I am having chest pains and need to call family for help. This is my only way out make a call on my phone. No camera on this first model of iPadAt this point your data is already gone. YOu will have to proceed with the restore. However if you backup on a regular basis, once the restore is done, you will have the option to restore from itunes or icloud.
If you don't have a backup, then sorry you won't be able to restore your data back. -
Font Rendering Issues-Help Required Please
In the past week, any Google search on Firefox or Chrome (but not Opera) gives me results where the fonts look gappy. Sometimes there are additional dots above the letters. I uninstalled and reinstalled Firefox from scratch in case an add-on was at fault but even with a clean install I am still seeing the issue. I checked my font settings and do not have any minimum font size set. I have allow pages to choose their own font ticked.
I've uploaded an image where I can see some correctly rendered text and some gappy looking text (not from a Google search but a Mozilla query). It also happens when commenting online sometimes, during typing it will be gappy but it will show properly once submitted. Any ideas for a fix would be warmly welcomed and I can give more examples if that would help. Although it's not Firefox related, I did restore all defaults in Chrome and it didn't fix the issue there either.
I uninstalled the most recent Windows Update since the problem is recent but it didn't change anything. I'm not sure if browsers would even look to my computers fonts.hi Auds77, this is probably caused by microsoft update kb3013455 which can cause font rendering issues on vista:
<blockquote>After you install security update 3013455, you may notice some text quality degradation in certain scenarios. The problem only occurs on systems that are running Windows Vista SP2 or Windows Server 2003 SP2. Microsoft is researching this problem and will post more information in this article when the information becomes available. </blockquote>
<sup>reference: https://support.microsoft.com/kb/3013455</sup>
one option may be to [http://windows.microsoft.com/en-us/windows/remove-update#1TC=windows-vista roll-back this particular update] for now until there is a fix by microsoft or you could also look if there is a [[Upgrade your graphics drivers to use hardware acceleration and WebGL|graphics driver update]] available on the website of the vendor (intel/amd/nvidia) which might also resolve this problem in some cases. -
Hi basically I have for a while receive my new bank card and I have reentered the details in my apple ID account and now it's saying I can't purchase any apps because there's a billing problem with the previous purchase! Because of This I can't update or purchase any apps what do I do? Help please!
you'll need to download and install the plugin JRE. Then you may have to goto the tools/Internet Options menu to select the new plugin as the default plugin.
-
I have a year old ibook g4. When I try to start it up it gets past the gray screen and then goes to the next page with the loading bar. It then loads very slowly gets to the end and freezes. I have tried reseting the pmu, and nothing. It will not let me start up in safe mode and i put the cd in and held down "C" on start up and still nothing. Any suggestions? Any help will be greatly appreciated.
One other thought, even though you reset the PRAM, there's an outside chance the NVRAM need to be reset manually.
Do this:
Restart the machine, holding down at the same time the Apple/Option/O/F keys.
When the command line appears, type in reset-nvram and press return. Next, type in reset-all, pressing the Enter key again.
The machine will now reboot. If all is OK, you'll get to the Log-in screen. Otherwise, you definitely have a hardware problem, which could the HD or Logic Board. -
R7950 TF 3GD5/OC BE ISSUES HELP ME PLEASE
I have two of these cards, one worked fine no worries at all. Would run max at games on 70 no issue at all, added another today and it cuts out at 67degrees, now i ran a test individually as the crossfire wasnt working.
The new card seemed to be the issue it cut out at 67, i went back to my old card and now that does exactly the same
1 old card worked fine
2 added new card and xfire wouldnt run past 67 degrees
3 removed old card and tried only new card, wouldnt get past 67 degrees
4 tried old card and that wont get past 67 degrees now
CANT PLAY any games at all. HELP :(
running a test on GPUZ it works fine running on 100% or 95% stress test as its not getting over 67 degrees
GPU temp 65
VRAM 1 65
VRAM 2 68
GPU LOAD 96%CPU doesnt get over 47 degrees in full use.
As for the PSU worked fine yesterday if its broken its developed a fault since adding an MSI card -
so, just read the title, there's not much that i can say about this..it ****** me off. who else has had this problem..should i just sell it and buy a new one..or is it because of the update? I'd appreciate the help and maybe some step by step instructions on how to get it working if you guys wouldn't mind.. thanks
contact itunes support
-
I cant start up my powerbook.
When i start up in single mode i get following message:
WARNING - blocks on volume Macintosh HD not allocatet!
error truncting data fork !No, I was not able to repar running disk utility:
Result was:
"Checking HFS Plus volume.
Checking Ectents Overflow file.
Checking Catalog file.
Incorrect size for file temp 1968149
(It should be 0 instead of 2663)
Incorrect size for file temp 1968379
(it should be 0 instead of 102)
Incorrect size for file temp 1968947
(It Should be 0 instead of 110197)
Incorrect size for file temp 1970988
(It should be 0 instead of 102)
Incorrect size for file temp 1970989
(It should be 0 instead of 102)
Incorrect size for file temp 1971411
(It should be (it should omstead pf 855)
Incorrect block count for file error_log
(It shoul be 257 instead of 240)
Volume check failed.
ERROR: The underlying task reportet failure on (-exit 9972)
Repair attempted on 1 volume
0 HFS volumes repaired
1 volume could not be repaired"
Neither was I able to reinstall the OS X -
IPad issues HELP QUICK PLEASE!!!
HI THERE!
I HAVE RESET AND RESTORED MY IPAD. I HAVE A VODAFONE MICROSIM BUT IT IS NOW SAYING NO SERVICE. HOW CAN I REGISTER IT TO GET A SERVICE!!????
PLEASE REPLY QUICKLY!Call Vodafone and don't type in ALL CAPS. We don't appreciate being YELLED AT.
-
I have an iPhone 6. For the first two weeks my bluetooth worked fine but then started having issues. Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls. The radio continues to play. Please help!
Hello there, Srushevics.
It sounds like you may be having issues with the connectivity of your iPhone with the Bluetooth in your vehicle. The following Knowledge Base article offers up some great steps for troubleshooting that Bluetooth connectivity with your iOS device:
If you can’t use a Bluetooth accessory or car kit
To resolve the issue, you'll need to first sign in to iCloud and review your devices:
Sign in to iCloud on your iOS devices and Macs with OS X Yosemite (available this fall).
On one of your devices, tap Settings > Bluetooth and look under My Devices. You'll see all devices that are connected to Bluetooth, but make sure that you see your Apple devices that are signed in to iCloud and are using iOS 8 or OS X Yosemite.
Sign out of your iCloud account from any devices that you don't want to use. To sign out of iCloud on an iOS device, tap Settings > iCloud > Sign Out.
Then, remove any inactive devices from iCloud:
Sign in to iCloud.com.
Select Find My iPhone.
Select any devices that aren't active anymore.
Wait for Find My iPhone to stop trying to find the inactive device.
You should see the option to remove this device from your account. Select it to remove the device.
After following the steps above, restart the device with the issue. Then try to use it with your Bluetooth accessory.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!
Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace -
When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?
Hello, ksb2.
Thank you for visiting Apple Support Communities.
We are investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Cheers,
Jason H. -
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444)
Maybe you are looking for
-
Aside from Pages not importing Word (from a Mac) properly when there's columns involved I have another column problem. I'd like to find a way to make a document that has two equal side-by-side columns, lets call them Column A on the left and Column B
-
Can anyone tell me how to reset my username and password from a free 9i version that i have downloaded. do i have to download the database again or what?
-
Can't add PCI-GPIB board in Windows 2000.
Installed software: NI-DAQ v6.9.2 NI-488.2 v1.7 MAX v2.2.0.3010 After physically installing the PCI-GPIB board and booting, Windows 2000 recognized the card and configured it such that it shows up in Device Manager. Device Manager shows "This device
-
Failed to read description. error code 2
failed to read description. error code 2
-
Can I download Yosemite on my desktop iMac intel core 2 duo 10.5.8?
Can I download Yosemite on my desktop iMac intel core duo 2. 7 , 1. Version 10.5.8. Or is it too old to update to the latest software?