Start Up Issue - Question mark folder flashes, then computer boots.

This is more of an annoyance than anything as the issue has not stopped my computer from booting. I haven't been able to find anything about this in support forums or online.
When I boot my macbook, the question mark folder thing flashes once, and then the apple logo comes up and the computer boots OK. However, it does take a few extra seconds to boot with this whole folder issue, anyone know what would cause that? I was thinking wrong start up volume but since it boots and thats the only volume (I checked and it's correct) I'm stumped. Any ideas would help.
Ben
Macbook Mac OS X (10.4.8)

Hello Ben.
Try deselecting and reselecting the startup volume and then restart.

Similar Messages

Grey screen, question mark folder flashing.

I have G4 powerbook with a grey screen and question mark folder flashing. I also have the Leopard dvd stuck in the slot. I tried the eject, and holding down mouse unsuccessfuly ejecting dvd. Any suggestions.

The flashing question mark means the system can't find anything to boot from. See this on the gray screen.

Question mark folder on restart but boots fine on cold startup.

I'm having an issue with restarting my macbook. Every time I *restart* from the OS, I get a question mark folder flashing. When I start from a cold boot, however, I boot into my drive just fine.
I have a MacBook Pro 13" late 2012 and I've replaced the HDD with an SSD. The SSD is a Kingston 240 gb. I can provide more information if necessary.
Please help! It's an avoidable issue but it bothers me and I'd like to have it fixed.

jchung1029 wrote:
After much research, I've found the solution.
My SSD is a Kingston V300 240gb SSD. For some reason, it has trouble with restarts but a firmware update fixed the issue. Do NOT reset the NVRAM/PRAM as it will keep your Mac from successfully booting into your drive. I had to wipe the drive and start over as the Disc Repair utility did not work either.
Thank you all that responded!
urgh that sounds a little icky. Are PRAM resets still broken?
Do you know if this is an issue with specific Mac models or generally with this disk model & Macs. I'd be contacting the vendors to see if it can be exchanged or refunded, I'd be concerned it could alter how other startup actions behave too, like target disk mode (hold T), the boot picker (hold alt), single user mode (cmd + s)… Without these troubleshooting becomes much harder.

G5 Startup issue - question mark folder

Hello -
I am using a PowerMacG5 Dual 2.3 ghz with 1GB RAM
OS 10.4.9
No partitions or anything - just one large hard drive.
It has started having an issue on startup :
For a second, it shows the Flashing question mark folder, then starts up as normal.
Not sure how long this has been happening, or what triggered it.
It runs fine otherwise, except for not recognizing its Airport card.
Latest Repair Permissions returns only the folllowing :
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
Owner and group corrected on ./private/var/log/secure.log
Permissions corrected on ./private/var/log/secure.log
Permissions repair complete
The privileges have been verified or repaired on the selected volume
But I want to avoid this becoming a larger issue - why would it be doing this Question Mark on startup and what can anyone recommend - clean install ? upgrade to 10.4.10 ? other ideas ?
Thanks

Hi infoAP-
It sounds like it may be looking for a startup disk, doesn't find what it is looking for, and resorts back to the system drive.
Take a look at your Startup Disk preference and make sure the drive of this particular mac is selected, unless you want it to boot from something else.
Luck-
-DaddyPaycheck

White screen, question mark folder flashing

Okay, yes I know there are tons of forms on this, but I haven't been able to get much from them.
My boyfriend has an iMac, one of the original ones. It hasn't been used for a while, so we aren't sure which OS X it is running.
The mac boots up, but comes up to the wonderful white screen with the flashing question mark folder.
We don't have the install disk, and cannot purchase one.
I've removed, cleaned and reinstalled the RAM. I've tried unplugging, holding power for 5 - 10 seconds & restarting, also restarting using CMD/OPT/P/R. All of which haven't gotten me anywhere.
I've read up a bit, being the possibilty the hard drive and screen aren't connected, I've considered taking it apart, but I'd like to save that bit of work for last resort.
I'm currently reading the option of downloading the OS X version it needs and using a USB or external hard drive. Now don't get me wrong, I'm pretty good with computers, but Mac's are out of my realm, so I need some help with this.
I had a standard "LaCie" external hard drive, and my windows 8 PC.
I'm not sure if the Mac runs PPC or Intel (is there any way to tell, not being able to use the computer?)
What OS X version would I download, doesn't have to be the newest, but the newest version that would be compatiable with both Intel and PPC?
What commands would I use to access and begin the install from the external hard drive?
If anyone can assist with those questions, would be very greatful.
Or if you have any other ideas that might work, I'm open for trying just about anything.
** We do not have an apple store, or authorized seller within a minimum 6 hour drive, so that's out of the question.
** I'm only looking for options of things that I can try. If I run out of options we will be sending it away. I want to try what I can before we get into the costly expenses.

It is hard to make any suggestions without knowing what model the iMac is..?
Look on the bottom of the stand for the EMC and/or serial #.........
see > Where can I locate the EMC Number on my Mac @ EveryMac.com
I'm not sure if this helps, but all Early 2006 thru 2009 Intel iMac models can use the $20 retail Mac OS X 10.6 Snow Leopard Upgrade DVD for the purpose of upgrading, testing, repairing, and installing OS X if your original install disc's are missing.
No, your windows formatted LaCie external Hard Drivel will not help you in any way at this point.
Another thing that you might try is the > Apple Hardware Test, because the test resides on the internal hard drive of the early models.

Question mark folder at startup, safe boot not working

Last night my iMac froze up, Force Quit didn't work, and I used the Power button to shut it off. When trying to restart, it was getting stuck at the grey Apple.
I tried unplugging the peripherals and restarting; zapping the PRAM and restarting; safe boot and restarting. Safe boot did it.
I then ended up going through those steps a few more times as my iMac starting freezing up again. One of those times I changed all my applications in the dock that were set to launch at login to not do so, wondering if that was somehow causing a problem. I also took a folder of recent items I'd created, mostly a LOT of PDFs of newspaper articles, burned it to a DVD and deleted the folder to free up more memory if that was part of the problem (I'm running out). I then restarted from the Apple menu and it shut down through safe boot and then restarted without safe boot and did so just fine. I ran Disk Utility and very few if any permissions needed repairing. And it was operating OK for a bit and then froze up again.
Now I'm getting the question mark folder at startup and safe boot isn't working. What should I be trying next? Lion Recovery with Command-R? I'm relatively new to Lion, but it had been working OK for me for a while now.
What other things should I try? Would Target Disk mode possibly work from the MacBook I'm using now, which doesn't have Lion installed?

The question mark folder usually means that the
firmware could either not find a valid operating
system to boot, or, it could not find a hard disk
with an operating system on it.
Have you tried booting to Lion Recovery? If
you can, then go into Disk Utility and do a
Repair Disk on your OSX volume. If the
OSX volume is not showing up, you may need
to do a reformat and re-install.
Since it is a 24" iMac (from your description) it was
a pre-Lion Mac. If you still have the original install
disks, try booting with it and use Disk Utility from it
to see if the hard drive is working.
Try this first before making a road trip.

Flashing world icon, sad mac & question mark folder

Hi. Since installing 10.4.3 my system won't boot. I downloaded and installed the update then restarted the machine, the screen go's dull grey and then a square icon with the world inside it start to flash, a few seconds after that a sad mac/question mark folder flashes then the system appears to start. The disk spins up, the Apple logo appears then after a few more seconds the disk graudually grinds to a halt and the system shuts itself down. Why would this be happening, someone told me that it sounds like it's trying to netboot (whatever that may be) How can I resolve this issue and get my system back? Thanks.

Try holding down option (alt) at boot to get the open firmware boot selection screen then select your internal drive as the book disk. After start up completes (if it does) go to System Prefs/Startup Disk and reselect the internal disk, restart and it should be fine.

Question mark folder then smiley face on start up

There is an ibook 1ghz g4 on ebay that says upon start up it has the question mark folder and then a smiley face upon startup. What does this mean could be wrong with it?

rick:
I wouldn't purchase an iBook G4 that starts out with an issue. These computers have been subject to a number of logic board issues since their release. Buying a pig in the poke may be ok if you are sure there's a pig in there. With this machine if the problem is a matter of a failed internal HDD, and you knew that for sure it might be worth it to purchase and replace the HDD. As it is, you have no idea what is going on and whether the computer can be repaired or how much it would cost if it could be repaired.
cornelius

Recently securely erased imac, boots up to question mark folder.

So i securely wiped my partitions lastnight, and when it was done it created a new partition called "untitled" so i thought that was ok and i could change it later. guess not. because i stupidly shut off my computer and turned it back on, it went to the question mark folder flashing. so i turned it off again and tried CMD SHIFT R. didnt work. i dont know what to do and i dont have a recovery DVD for Mavericks

First of all, hold the Option (Alt) key while your computer is starting, and if you see Recovery HD, choose it. Then, reinstall OS X Mavericks.
If it doesn't work, hold Command, Option (Alt) and R keys while your Mac is starting up and reinstall OS X. If you installed Lion or Mountain Lion in the past, the oldest OS X version will be installed instead of Mavericks, so you may have to upgrade Mac OS X

Question mark folder on startup, Question mark folder on startup?

Have startup problem with question mark folder flashing on startup. How do I fix it?

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

MacBook Pro hard disk upgrade shows question mark folder

I recently bought a 1TB hard disk for my teenaged daughter's MacBook Pro.
I formatted it, used Carbon Copy Cloner to clone the existing drive. I even made sure to create the recovery partition.
I restarted while holding the option key and chose the new drive. It booted fine so I checked in System Preferences to make sure it was selected as the boot device.
I opened the case and swapped the drives. Put it back together and restarted only to see the question mark folder!
I tried booting while holding the option key and now I get the choose a network prompt.
I am desperate and hate the thought of disappointing my daughter. It used to be that I was her hero who could fix anything now I'm the guy who asks too many questions and doesn't put enough money on her debit card. Granted she busts her butt getting awesome grades and I was upgrading her drive so she could continue her video yearbook for her school. So I shouldn't complain but it would be great to be her hero again.
BTW, I am not a newbie to the tech world but I don't do nearly as much in the Apple arena as I do in the PC world. Then again I've been a senior tech in the industry sine before IBM had a PC. In fact, my first real work was on a 6502 processor that used the same machine code as the Rage of the day, the Apple ][. All that to say I usually can find my way around a problem but this one has me stumped.
I appreciate any assistance offered.
Thanks,
Thom

I tried to reboot with the option, command P. And R keys pressed. I heard the ding several times it still showed the question mark! I also tried the shift option and it only displayed the network selection. Also I tried to press C so I could boot from USB and it didn't work either.
If I cannot get this to work I fear my only other choice is to use a FireWire enclosure. This isn't a good option as my daughter does mostly movie work and iMovie has this terrible "feature" that forces all movies to be stored in one place. It sure would be handy if it allowed movie projects to set the storage location individually. I suppose I could simply move all the movies to the drive and try to find a way to point all iMovie projects to the external drive.
Unfortunately, my daughter is one of those Mac users who isn't savvy enough to use anything but the default settings. Heck I've tried to explain to her that she ought to get rid of the big files once she has done her work. That's why her drive is always full.

Flashing Question Mark Folder on Start-up

I recently starting having administration issues with my Mac Mini.
I went to update to OS 10.5.7 and when the administrator box came up asking for my password, my name was missing. After putting in the correct information, was unable to update, but received the message what my clue to password was.
Anyway, I performed a safe startup, changed the password and tried again. Same issue as before. So I started up from the Start Up Disk, and ran Disk Utilities and verified the disk and repaired any permission issues. When I started up my Mac Mini from the hard drive, I still did not have my administrator password working.
At this point, the start-up ping is gone.
I reset the Pram and had the same issue. So, I saved all important files to an external hard drive and tried to do a clean install. I was unable to do the clean install.
I removed the hard drive from my Mac Mini and installed it into a friends Mac Mini. I had complete control of my computer with no administrator password issues, the ping was there, and I could reload all saved items and still not have any issue no matter how I started up the computer. I then performed a complete erase and reinstall and still had no problems.
I reinstalled the hard drive into my Mac Mini, and I now have the Flashing Question Mark Folder with gray screen on start-up and no ping. Can't fire wire to start up, can't clone, can't start-up from disk, safe mode, etc..
Any ideas would be helpful. Most likely I will be going to the Apple Store and seeing what they can do.

generally, the flashing folder mark means it can not find the startup drive.
if you hear those kind of noises your hard drive is most likely dead. while this is almost certainly true you can try booting from the install DVD and see if the drive is visible in disk utility. if you can't insert the DVD try this. reboot and hold option at the chime. this should boot you into startup drive manager. there you should be able to insert the DVd and choose it as the startup drive. boot from the DVd and once past the language screen start disk utility from the Utilities menu at the top. see if it detects the internal drive. if it does, try repairing it. if it doesn't the drive is dead.

Flashing question mark folder at start, broken CD drive, warranty Q's.

Hello! Thanks for reading.
Okay, so here's the background: I was just chilling around the house yesterday with my macbook, and it freezes, with no response from the touchpad or keyboard. I figure no problem, and just turn it off and on again. And then thats when I got the flashing question mark folder.
So I hopped on my family's PC to do some research, hoping to be able to fix it myself. Turns out the best way to fix it is to pop in the disk that came with the computer during start up... which I can't do because my disk drive is broken. I also tried other things, like pressing various keys (ctrl + option + p + r, or something like that)... and that didn't work.
The disk drive broke when I was at school, and as it was finals week, I had no time to get my computer to a genius bar. Then I moved quite a distance (see below), a process which has taken up most of my summer and made me quite busy to the point it has taken my macbook pretty much dying on me to get it to a genius bar. Gah.
So I guess I have a lot of questions now.
My computer is JUST a year old, by give or take a week or two.
I bought my computer from an authorized U.S. reseller in Japan while I was living there (I live in the US now, which I definitely wasn't expecting a year ago)... and no contact from apple came to buy apple care. Is it possible that because of the circumstance under which I bought my computer, that apple may still cover any repair or replacement fees under the warranty?
Also, I made an appointment at the local genius bar. Will that be free?
Also, does anybody have any other suggestions about how to get my computer up and running away from the **** that is the question mark folder?
Much thanks! I appreciate your time.

You made 2 big mistakes. 1) Apple may or may not contact you about AppleCare (sometimes I've gotten a postcard or email and other times I've not) but it is up to you to buy it before the 1 year mark. 2) whether it was convenient to get the computer repaired at the time or not, you should have contacted Apple to get the issue in the computer. If you didn't, Apple has no reason to believe it happened after the warranty ended.
You are going to foot the bill for the repairs

Flashing question mark folder OS X 10.6.8. Issue is not the drive itself.

Received flashing question mark folder on a MBP5,5 running 10.6.8. Removed the drive and was able to boot on same machine with the drive plugged in as external USB. Any idea as to what the issue may be? It's not the drive itself. Bad connector? Going to update the drive to mountain lion this weekend to see if that resolves anything.

Actually, it is the drive in some way.
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Start Up Issue - Question mark folder flashes, then computer boots.

Similar Messages

Maybe you are looking for