Start up issues, need help!

So, my macbook pro wouldnt connect to the Internet last night, so I restart it, now at start up there is a loading bar (assuming it's an update) when the loading bar has filled the system just shuts down, this has happened numerous times since last night and I'm not sure what to do, any help would be greatly appreciated as I'm new to apple products.

It would be helpful if you indicated the EXACT MBP that you have and the OSX that is installed.
Ciao.

Similar Messages

Start up issues - need help desparately

i get a grey screen with the apple logo and spinning. then mbp just switches off.
I have attempt the leopard dvd boot. i couldnt run a repair with disk utility but it claims hard drive needs repairs with i verfiy.
does this mean its a hard drive failure or file corruption?
what i can i do? i ran through the instructions on the start up trouble shooter on the apple support site

You need to post in the MacBook pro forum.
http://discussions.apple.com/forum.jspa?forumID=1149
This is the iPod 5th gen forum.

Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started". I need help because i'm enable do download the new update. Thanks

Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started".
I need help, because i'm enable do download the new update.
Thanks

Type "Apple Mobile Device service" into the search bar at the top of this age by "Support" and read the resulting help articles.

Hi, Hi, Hi I have the old MacBook Pro. Upgraded to Mountain Lion which completely wrecked the system. So downgraded to Snow Leopard. The updated the combo update. Now stuck on blue screen at start-up. Need help. Greatly appreciated. Thank you.

Hi,
I have the old MacBook Pro. Upgraded to Mountain Lion which completely wrecked the system. So downgraded to Snow Leopard.
Then updated the combo update. Now stuck on blue screen at start-up.
Need help. Greatly appreciated. Thank you.

Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
      loads select your language and click on the Continue
      button. When the menu bar appears select Disk Utility from the
      Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status
      of the drive in DU's status area. If it does not say "Verified" then
      the drive is failing or has failed and will need replacing. SMART
      info will not be reported on external drives. Otherwise, click on
      the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
      from the drop down menu to one. Set the format type to Mac OS
      Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on
      the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

RSI Issue: Need help on IBM/Lenovo external keyboards w Trackpoint? Pic

Need help on IBM/Lenovo external keyboards w Trackpoint? Pic
I started my journey with Thinkpads on a T42, then T43.. then T61, X61T, R61 & T410 (bought for 2 cousins & they love it), W510 (dads new laptop). I may be a much recent convert but I swear by them now.
MAJOR ISSUE: Recently started feeling RSI (Repetitive Stress) & Carpal Tunnel symptoms (already doing stretches.. adjusted the desk.. & finding new adjustable LCD stand) since I am not using the Thinkpad directly... but using it docked with an External keyboard. Lot of Mousing as well. I'd like to go back to Thinkpad FEEL... or atleast have keyboard with a pointing device so my hands dont have to keep moving back n forth.
So, it would be great it some of my fellow T4x/T6x/X6x 'ers would guide me a bit on this... share their first hand experience, or what they've seen on these keyboards and feel free to point me to reliable sources of information.
Currently this would greatly be use with T61 - Adv Mini Dock - 30" XHD3000 LCD as shown in my signature below.
Anyone who has used or know something about one of these Thinkpad related keyboard (ideally both of these to give a comparative response).
Which of the following have you used?
How was the experience?
(Maybe point me to thread with peoples experiences)
If you've used several, which one do you prefer / recommend? Why?
At the moment I have a "slim" BTC 6200C desktop keyboard. It has laptop like scissor keyswitches, so I like it the slim notebook like profile.
The way I have positioned my 30" LCD I'd like to be able to keep the keyboard on my lap at times while on my chair and maybe on the desk at times.
ThinkPad Full-Size UltraNav USB Keyboard
The keyboard and trackpad of the IBM Lenovo Thinkplus USB Keyboard with Ultranav:
ThinkPad Travel UltraNav USB Keyboard
The travel version of the above:
Newer:
ThinkPad USB Keyboard with TrackPoint
A 2009 replacement for the previous one but not the full keyboard nor wireless:
Thinkpads:
T61 8892-02U: 14.1"SXGA+/2.2C2D/4G/XP|Adv Mini Dock|30" Gateway XHD3000 WQXGA via Dual-link DVI
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP
Dell:
Inspiron 9300: 17"WUXGA/NVidiaGeForce6800/2.2PM/2G/XP (old)

I had the same issue - had to go to voice command for a few weeks (sucked) wore wrist gards to keep things netural.
Everything went away when I changed to a USB keyboard with the Ultra nav (I use the track point and disable the pad).
I've been working like that for 6+ years now... no issues.
(as a side note, sleeping with wrist guards on helped heal me the fastest. I had neoprine, with a metal plate in them - from a local drug store)

LCD monitor display issue, need help

I have a strange problem with my LCD display, it goes like this:
When I first boot up the mac and the wallpaper appears on the display the image looks perfect, all the tones are right etc, but as the startup progresses, programs loading etc, the display changes suddenly, becomes too bright in the highs, too dark in the lows, and over-saturated in between. Its looks horrible.
I have just discovered that I can correct the issue by going into system prefs, display, selecting the options tab (next to Display and Color) and turning overscan on, then back off, voila, all fixed.
Looks great.
Thing is I have to do this every time now that I start the computer, and Im wondering if anyone knows what causes this issue and if theres anything I can do as a more robust solution.
The kicker is I have the same problem with a viewsonic LCD on my secondary machine (Powermac G5, Osx 10.4), right at the beginning of startup it looks great then suddenly all goes wrong, too dark/light over-saturated. Its as if the image has been blended with itself in multiply mode a la photoshop.
And on my second machine there is no option for overscan so I cant use my quick fix.
Is overscan a feature of the OS or the monitor?
The worst part is I need these displays to work correctly because Im a graphic designer, I need my colors to look right so I can do my job, and while I could go buy a $1000 monitor its not possible atm, and Id kinda like to know why this problem occurs. So if I do buy a different I can be assured the problem wont rear its ugly head again. But I dont think the problme is the monitor. I think its something to do with the communication between the display and the computer.
The monitor can display correctly, and does for a brief moment, then it all goes very wrong. Ive spoken to NEC and they werent much help but Ill be trying them again today too.
But again, I thinks its the computer, not the monitors as I can reproduce the issue swapping out monitors.
I hope Ive described it adequately,
Thanks in advance for any help forthcoming, this is very frustrating and is causing me endless headaches.

Mattdp,
I am currently having the same problem with my 20" cinema display. Did you ever find a long term solution? Apple states that the PowerMac G5 is legacy with no support available, and suggested a reset the PRAM. I did so to no avail. I too have 10.4.11 and thus no "overscan" to turn off. This is my wife's primary computer for her photography business, and the color issue needs to be resolved as quickly as I can find the answer.
Is there a possible solution through the terminal?
Rick

Spry Menu Bar issue, NEED HELP...???

Here is the coding for a menu bar that i created with CS3, for some reason i am having an issue when i open the web page in IE, on firefox and safari it looks fine, the menu drops down to sub menu's fine, but for some reason when i open it in IE, the submenu's show on the very top of the page rather than right below the menu itself, please check my coding and see if there is an issue???
i ran compatability and there are no issues shown.
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - Revision: Spry Preview Release 1.4 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    cursor: default;
    width: auto;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: 10.4em;
    float: left;
    background-image: url(tab2.png);
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    z-index: 1020;
    cursor: default;
    width: 8.2em;
    position: absolute;
    left: -1000em;
    text-decoration: underline;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
    left: auto;
    background-image: url(../tab1.png);
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
    width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
    position: absolute;
    margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
    left: auto;
    top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
    display: block;
    cursor: default;
    padding: 0.5em 0.75em;
    color: #FFFFFF;
    text-decoration: none;
    border-left-color: #0063bd;
    border-right-color: #0063bd;
    border-right-width: 3px;
    border-left-width: thin;
    font-family: Calibri;
    font-weight: bold;
    font-size: 19px;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
    color: #000000;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
    color: #000000;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarDown.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarRight.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarDownHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarRightHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
    display: inline-block;
    f\loat: left;
    position: relative;

Hey gramps, thanks for the info, i have updated my spry framework to 1.6.1 but the problem is still the same, i recreated my menu with the new 1.6 and it still doing the same thing, the submenu's are like vertically reversed... ugh need help.
here the new code
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    cursor: default;
    width: auto;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: 10.4em;
    float: left;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    z-index: 1020;
    cursor: default;
    width: 8.2em;
    position: absolute;
    left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
    left: auto;
    background-image: url(../tab1.png);
    line-height: 18px;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
    width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
    position: absolute;
    margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
    left: auto;
    top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
    display: block;
    cursor: pointer;
    padding: 0.5em 0.75em;
    color: #FFFFFF;
    text-decoration: none;
    font-size: 19px;
    font-family: Calibri;
    font-weight: bolder;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
    color: #000000;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
    color: #000000;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
    display: inline;
    f\loat: left;

Concurrent crystal license timeout Issue, need help.

Hi,
My company is using crystal enterprise 10 with 18 concurrent user license.
However, we often hit out of crystal license issues.
Does time to wait for exporting crystal reports to excel/pdf takes up licenses?
Does time to wait for crystal report to be printed or viewed on the web browser takes up licenses?
We all know that user sessions take up user licenses. 1 user login take up 1 license.
Does crystal pruning job takes up user licenses too?
Need help urgently, much appreciated.

Hi Daren,
Support on Cystal Enterprise 10 has expired. Make sure that your users are actually logging off and not just closing their browser.
One user can take up multiple licenses by not logging off or opening multiple browsers to view multiple reports. Scheduled jobs that are running do not take up license, but a user veiwing a historical instance does take up a license.
In your metrics tab in the Cyrsatl Management Console -> Servers-> cms you should be able to see the active number of sessions- system connections are backend connections between the servers and these do not take up any licenses.
Best Regards,
Jadie

T400 LCD dim issue - Need help!!

I'm having a LCD dim issue with a T400. Have changed the LCD panel, LCD cable and systemboard but still having same issue. If i removed the lcd card, then the display is working fine. I've tested the lcd card in another working unit and it's working as well (means the lcd card is working). I use a working lcd card and plug into this T400 but LCD still dim.
I've try to switch the problematic lcd cable and lcd panel to a working systemboard and it kills the systemboard. Have try to switch a few things but still unable to find the root cause. Urgently need help on this. Any advice will be appreciated.
Model : 6475-RM5

hey bhoh
i suggest uninstalling your current graphic card driver, let windows install its own generic drivers and see if that makes any difference
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Stuttering flv playback issue- need help asap

We need help asap. Have a project is due to deliver today (5/14).
We have a video to go on a dvd-rom, live action with Motion Graphics behind.
When output is done thru Projector the Motion Graphics stutter as they scroll.
Here is more technical info:
Stuttering flv playback issue:
Prores 422 timeline 29.97fps 1280x720 output from fcp using current settings.
Mov file is approx 7gb, plays relatively smooth on a mac pro with no raid.
Frame by frame analysis shows all frames are present with no jumps tears or skips.
Tried several output paths, programs and settings to create a smooth flv file to no avail.
We adjusted data rates from 2k, 3.5k, 4k and 8k, no luck
We adjusted keyframe rates from low to all frames, no luck.
We tried cs3 flash encoder, cs5 media encoder, squeeze ect, same results.
Playback in the flash projector seems to choke slightly no matter what we do.
Have also posted in the Director Forum.
Any help much appreciated!

Here are a few ideas off the top of my head:
Try playing the file using a different xtra, sometimes different ones will work better. If you have Director 11.5, there is a native flv playback xtra.
You can build a player easily in Flash using the flvPlayback component, then bring that into Director as a swf.
Once you have the video in Director, try making the member Direct To Stage (DTS). If it is already DTS, try making it not DTS.
Make sure the video is not transparent, and nothing in Director overlaps the video... in fact, when the video is playing, nothing should be moving at all, and try to keep the amount of code that is running to a minimum.
Try lowering your video's data rate further or try using a different codec.
Using VBR (Variable Bit Rate) compression often makes the video appear to play smoother.
Try compressing the flv with different software. FFMpeg, for example, is free and does a very good job, often better than the Flash Video Encoder that comes with Flash/Creative Suite.

IMAC NOT STARTING! I NEED HELP BADLY!

so one day i had left with my imac G5 on, maybe some programs open, and while i was away our power went out, so the imac was turned off without correctly powering down obviously, when i turned it back on it took forever and never even reached the screen where you sign into an account...
it stays on this blue screen forever and never starts up all the way. i tried putting the install disk in and it ignores it, it runs or atleast i can hear it trying to, but nothing happens. ive correctly turned it off, pushing the button until it shuts down, but ntohing works. i cant get on my mac! this *****! i need help and asap.
HELP ME PLEASE!
-Hayley
Message title was edited by: Host

So i have the back off now, and i see how that button works, i pressed it once with the power cord out, just messing around, so now i dont know what im suppose to do...
i put the power cord in and this green light shows up inside, but then i dont know how to power it up with the back off, while pressing that button, i dont even know, i need help!
please help!
lol
-Hayley

Narrow down start up issue need experienced/knowledgeble Mac Expert

Hi,
I have spoken with two level 2 mac specialists and both have concluded that I am having a 3rd party software issue with my Mac Pro 3.0. The issue is it takes 5 minutes for my Mac to boot up from start up/restart. Here is my question; in OS9 to narrow down an issue I could simply drag an Extension on to the desktop and restart to see if the issue continued. Since this issue that I am having is a 3rd party conflict in start up is there a way to remove or 'disable' 3rd party software so basically the system thinks it's not there so I can narrow this issue down to who is the problem child? I really don't want to trash all my 3rd party software to figure this out.
I have recently done a Archive and Install from the install CD 10.5 and the start up was fine. Then when I update to 10.5.4 or 10.5.5 the long start up issue is back. So I am concluding that something is not 10.5+ compatible.
Look forward to someone knowing the answer to my question.
Thanks.

Hi Francine thanks for your input. If I'm not mistaken the Shift key is 'Safe Mode' and that is great but I need to either remove one 3rd party software package at a time or be able to add one at a time until I find the ugly step child. And I don't think Safe Mode will allow that.
I did try the Verbose mode which was pretty cool to see however once it kicks on the video card and goes to the blue screen that is the transition screen after the Apple and before the desktop I lose the verbose read out and at the blue screen is where it hangs for 4 minutes. So unfortunately that didn't work. I really need to know if I can take out a key 'Component' from a specific folder that will not allow a 3rd party to register and then if it's not it simply place it back in the folder and that software is back in business. I am amazed that with today's technology first, that the computer doesn't tell you what the issue is and second that no one has come up with a way to trouble shoot when things do go as planned. Sigh. Any other recommendations? Anyone....Bueller....Bueller?

Odd mail issues, need help

A couple of things I need help with.
1) Mail constantly goes offline and pops up a dialog box asking for my password. I enter my password in the box and hit okay and it doesn't take. I can hit cancel and put mail back online but that's a pain. What is causing that and how do I fix it?
2) People send me mail and then about 30 min later I get the same email again. This problem doesn't happen with every email, just some.
I have no mail rules on. and I run virus software and it's fine.
Can someone please help me on this. Thanks!
1.25 GHz PPC G4 / 20" Mac OS X (10.3.9) 768 MB DDR SDRAM, iSight camera, Wacom Tablet

Open /Applications/Utilities/Keychain Access, choose Keychain First Aid from the application menu, and proceed to repair the keychain. If that doesn’t work, you may try removing the password entry from the keychain and letting Mail create it again.
Also, in Mail open Help > Mail Help and read the article titled “Mail keeps asking for my keychain password”, in case it applies to you. There is a related article titled “My password is not saved” that you may also want to read, but beware that the last suggestion provided there (deleting the mail account) is wrong and could cause irretrievable data loss if this was a POP account.
Note that Mail doesn’t always correctly report what the problem really is. If Mail can connect to the server but cannot log into your mail account for some reason, it’ll ask for your password, regardless of whether that’s really the problem or not. Don’t keep entering the password every time, because that’s not the problem (click Cancel instead, and take the account back online afterwards).
What’s the time interval chosen in Mail > Preferences > General > Check for New Mail? If it’s set to Every minute, try changing it to Every 5 minutes.
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
Also, try using a different method to connect to Internet, if possible, or connecting the computer to Internet as directly as possible, i.e. bypassing any routers that might be present, using an ethernet cable instead of wireless, etc., and see whether that makes a difference.
BTW, if you’re using Mac OS X 10.3, as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Mac OS X 10.3 & earlier forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

Mouse cursor freezes a few seconds after start-up? Need help!

Laptop: Samsung Series 9
OS: Windows 8.1
Problem: since booting up my computer today, my cursor will freeze about 30 seconds after boot-up. Prior to this, I'll be able to move my cursor for a few seconds as I normally would, but then I will inevitably see the blue loading circle next to the cursor
and then my cursor will be frozen in place. I can still use my keyboard/everything else functions regularly. I decided to boot up my computer in safe mode and my cursor works fine. Clearly then, there must be some software/start-up issue?
I should note that I used my laptop fine yesterday night. When I booted it up today my cursor froze and I saw the restart prompt that said windows will restart on its own in 1 day to update. So I updated/restarted and the problem persists.

Hi,
Mostly, this issue is caused by third party services or programs conflict problem.
Please use Clean Boot to troubleshoot:
How to perform a clean boot in Windows 8.1, Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
In addition, please check and install the mouse driver from the vender official website.
Karen Hu
TechNet Community Support

HP NC2400 Drive cable issue : need help

Can someone please send a picture of what an installed zif harddrive drive for an NC2400 looks like ? Does it go topside up or down ? How does the cable look when installed ? Need help. Does anyone have a spare harddrive cable ?
Any help would be much appreciated!!
Bill C.

This manual shows the drive with the metal side Up
http://h10032.www1.hp.com/ctg/Manual/c00741440.pdf
Service manual here, it does not show the cable as a separate part of part number
Click Me
You will need to contact HP parts
http://partsurfer.hp.com/ContactUs.aspx

Start up issues, need help!

Similar Messages

Maybe you are looking for