Start up problem - failure code

I have a DV6 notbook XD261EA#ABU.
Fails to start up and keeps entering repair. done a start up test and got failure ID:
6C7B9L - 0005LU - XD0003G - 60RG03
Any idea what this is and what i can do?

Hi,
Shutdown the notebook.  Tap away at f10 as you start the notebook to enter the bios menu.  Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory.  Post back with the results - particularly the result of the HDD test.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Start up problem - blink code?

    Hello,
    I'm new here so apologies if I have not found an already answered topic.
    I have a HP dv7 Laptop (17.3'' 2009 model), and when fired up the screen is blank (not even lit), the num lock & caps lock flash simultaneously and continuously at an interval of approximately 3 seconds apart. I have been reading up on the 'hp blink codes', but as I interpret them, none of them apply to me...
    My understanding is that there should be a number of blinks/beeps then they should stop, and, should you wish the laptop to repeat the code to push the power key...
    Is there any sort of fault code for this, or even a resolve?
    Thanks,
    Chris
    This question was solved.
    View Solution.

    Hey Christopher-B,
    Unfortunately, it sounds like it might be the 1 blink patter which indicates a processor failure. The 1 blink pattern is just as you described: Blink, pause, blink, pause, blink, pause and so on. You may have already come across this document about blink codes before, but it will give you more information about this issue. 
    Does your computer ever start up properly or do you get the blink code every time? If it happens every time, it could be that the processor just needs to be reseated. Most likely, it will need to be replaced. 
    Let me know if you have any questions!

  • I am facing problem in starting ShellHWDetection service Error code 1075,please help

    I am facing problem in starting ShellHWDetection service Error code 1075,please help

    Shellhwdetection is a Windows service which stands for Shell Hardware Detection Service.
    It provides notifications for AutoPlay hardware events.
    System error code 1075 means "The dependency service does not exist or has been marked for deletion."
    Please run services.msc, then find Shell Hardware Detection Service, view its dependencies
    Make sure the three services are set to running "automatic" in Services.
    If this doesn't help, then run sfc to check if there're some missing or corrupted files in system.
    Yolanda Zhu
    TechNet Community Support

  • Errors Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35.

    Hi There,
    I'm getting the errors below and but I have not got any BSOD.
    The errors I'm getting in eventviewer are Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35.
    This is what the logs files says about each error.
    Pku2ulog:
    Unknown( 10): GUID=c36a26fb-03a9-d591-3984-dc17e4a48527 (No Format Information found).
    p2plog:
    Unknown( 89): GUID=fc9d5ca5-e6c8-627c-be74-e6e0a98bbf57 (No Format Information found).
    negolog:
    Unknown( 37): GUID=2553184f-6f2a-3198-ddb7-93ab1ad2d125 (No Format Information found).
    idlistenlog:
    Unknown( 10): GUID=418a567f-b393-1423-26aa-123149ef8882 (No Format Information found).
    homegrouplog:
    Unknown( 12): GUID=96f7a94a-4343-6ede-ff2b-dd1dafeed500 (No Format Information found).
    However, the 'Unknown(xx)' number changes times to times.
    Could you help me please?
    Thank you very much for your attention.
    Best Regards.

    Hi,
    If you have Home group set up, please go to Control Panel – Network and Sharing Center. Choose homegroup and sharing options and click “Leave the homegroup”.
    Juke Chou
    TechNet Community Support

  • Black Screen After Wakeup / Sleep failure code 0x00000000 0x1f006500

    Problem waking up from sleep on my mid-'09 MacBook Pro 5.4 running Lion. Bought new, under 2 years old. Upgraded RAM to 8GB and installed an SSD around Janurary this year. Problem started under Snow Liopard no more than a couple weeks back from today. Searched the web up and down for this, found a lot of people with the exact same issue, and tried quite a few suggestions.
    - changed settings to wake up on pressed keyboard instead of lid open
    - logged in under a different user
    - repaired permissions and checked disk (some permission fail to repair)
    - run extensive Apple's hardware test and memtest, together with AppleJack in single user mode (all passed, although Apple hardware test sometimes froze & I had to restart)
    - removed all side programs that use kext files, only leaving Google's
    - uninstalled istatpro, iAlertU and LittleSnitch
    - set not to wake up for bluetooth nor network
    - set fast sleep instead of hibernation so that RAM is not written to an SSD
    - switched RAM modules around. Sometimes after a hard reset my RAM is cut in half and shows either 4GB or 7.75GB instead of normal 8GB (only the second module slot is displayed as empty)
    - removed ethernet network settings (disabling it), restarted & added settings / reenabled it
    - SMC, PMU resets
    - deleted power management plist file
    Haven't tried hibernation when RAM is written to a disk but this is an absolute last resort...
    Now trying out the "SmartSleep" program / application.
    After every hard reset the login screen freezes (mosue works but no response from the keyboard) so I wait for a few minutes or restart the boot and wait a minute or so again.
    My plan now is to find a set of RAM modules somewhere to test and go into an Apple store for a check-up. I had AppleCare transferred from another laptop that expired on March this year. So I am not covered now. So far my Apple laptops haven't been all that reliable, it seems. This one went for nearly two years with no hardware problems - this could be the first one.
    Here is a full log extract of the problem area:
    Jul 27 23:09:39 Super-Bad-Dude kernel[0]: macx_swapon SUCCESS
    Jul 27 23:35:13 Super-Bad-Dude kernel[0]: hfs: cat_lookup_siblinglinks: getkey for 2389754 failed 2
    Jul 27 23:51:43 Super-Bad-Dude kernel[0]: 00000000  00000020  NVEthernet::setLinkStatus - not Active
    Jul 27 23:51:43 Super-Bad-Dude kernel[0]:
    Jul 28 09:12:55 Super-Bad-Dude kernel[0]: Wake reason: OHC1
    Jul 28 09:12:55 Super-Bad-Dude kernel[0]: Previous Sleep Cause: 5
    Jul 28 09:12:55 Super-Bad-Dude kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 6 of Hub at 0x4000000) may have caused a wake by issuing a remote wakeup (2)
    Jul 28 09:12:55 Super-Bad-Dude kernel[0]: wlEvent: en1 en1 Link DOWN
    Jul 28 09:12:55 Super-Bad-Dude kernel[0]: AirPort: Link Down on en1. Reason 4 (Disassociated due to inactivity).
    Jul 28 09:12:55 Super-Bad-Dude kernel[0]: en1: 802.11d country code set to 'X3'.
    Jul 28 09:12:55 Super-Bad-Dude kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    Jul 28 09:12:55 Super-Bad-Dude kernel[0]: HID tickle 24 ms
    Jul 28 09:12:56 Super-Bad-Dude kernel[0]: 00000000  00000020  NVEthernet::setLinkStatus - not Active
    Jul 28 09:12:57 Super-Bad-Dude kernel[0]: en1: 802.11d country code set to 'US'.
    Jul 28 09:12:57 Super-Bad-Dude kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    Jul 28 09:12:59 Super-Bad-Dude kernel[0]: MacAuthEvent en1   Auth result for: 94:44:52:70:30:88  MAC AUTH succeeded
    Jul 28 09:12:59 Super-Bad-Dude kernel[0]: wlEvent: en1 en1 Link UP
    Jul 28 09:12:59 Super-Bad-Dude kernel[0]: AirPort: Link Up on en1
    Jul 28 09:12:59 Super-Bad-Dude kernel[0]: en1: BSSID changed to 94:44:52:70:30:88
    Jul 28 09:13:00 Super-Bad-Dude kernel[0]: AirPort: RSN handshake complete on en1
    Jul 28 09:13:30 Super-Bad-Dude kernel[0]: nspace-handler-set-snapshot-time: 1311840811
    Jul 28 09:25:04 Super-Bad-Dude kernel[0]: hfs: cat_lookup_siblinglinks: getkey for 2392242 failed 2
    Jul 28 09:29:03 Super-Bad-Dude kernel[0]: nspace-handler-set-snapshot-time: 1311841745
    Jul 28 09:29:08 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff80230b7b20 (sessions; ret 22; type 2)
    Jul 28 09:29:08 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff80230b7b20.  dropping the event.
    Jul 28 09:29:09 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff802590a268 (chatsync; ret 22; type 2)
    Jul 28 09:29:09 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff802590a268.  dropping the event.
    Jul 28 09:29:09 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff802590a268 (chatsync; ret 22; type 2)
    Jul 28 09:29:09 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff802590a268.  dropping the event.
    Jul 28 09:29:10 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff802590a268 (chatsync; ret 22; type 2)
    Jul 28 09:29:10 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff802590a268.  dropping the event.
    Jul 28 09:29:14 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff80235be930 (Keychains; ret 22; type 2)
    Jul 28 09:29:14 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff80235be930.  dropping the event.
    Jul 28 09:29:14 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff80235be930 (Keychains; ret 22; type 2)
    Jul 28 09:29:14 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff80235be930.  dropping the event.
    Jul 28 09:29:14 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff80235be930 (Keychains; ret 22; type 2)
    Jul 28 09:29:14 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff80235be930.  dropping the event.
    Jul 28 09:29:14 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff80235be930 (Keychains; ret 22; type 2)
    Jul 28 09:29:14 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff80235be930.  dropping the event.
    Jul 28 09:29:14 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff80235be930 (Keychains; ret 22; type 2)
    Jul 28 09:29:14 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff80235be930.  dropping the event.
    Jul 28 09:29:14 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff80235be930 (Keychains; ret 22; type 2)
    Jul 28 09:29:14 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff80235be930.  dropping the event.
    Jul 28 09:29:15 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff80235be930 (Keychains; ret 22; type 2)
    Jul 28 09:29:15 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff80235be930.  dropping the event.
    Jul 28 09:29:15 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff80235be930 (Keychains; ret 22; type 2)
    Jul 28 09:29:15 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff80235be930.  dropping the event.
    Jul 28 09:29:18 Super-Bad-Dude kernel[0]: add_fsevent: unable to get path for vp 0xffffff80235b4d90 (login.keychain; ret 22; type 9)
    Jul 28 09:29:18 Super-Bad-Dude kernel[0]: add_fsevent: unabled to get a path for vp 0xffffff80235b4d90.  dropping the event.
    Jul 28 09:30:20 Super-Bad-Dude kernel[0]: IOSurface: buffer allocation size is zero
    Jul 28 09:32:14 Super-Bad-Dude kernel[0]: IOSurface: buffer allocation size is zero
    Jul 28 10:12:42 localhost kernel[0]: Darwin Kernel Version 11.0.0: Sat Jun 18 12:56:35 PDT 2011; root:xnu-1699.22.73~1/RELEASE_X86_64
    Jul 28 10:12:42 localhost kernel[0]: vm_page_bootstrap: 1959200 free pages and 56032 wired pages
    Jul 28 10:12:42 localhost kernel[0]: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
    Jul 28 10:12:42 localhost kernel[0]: zone leak detection enabled
    Jul 28 10:12:42 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Jul 28 10:12:42 localhost kernel[0]: mig_table_max_displ = 72
    Jul 28 10:12:42 localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    Jul 28 10:12:42 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    Jul 28 10:12:42 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
    Jul 28 10:12:42 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Jul 28 10:12:42 localhost kernel[0]: calling mpo_policy_init for Sandbox
    Jul 28 10:12:42 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    Jul 28 10:12:42 localhost kernel[0]: calling mpo_policy_init for Quarantine
    Jul 28 10:12:42 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    Jul 28 10:12:42 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Jul 28 10:12:42 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Jul 28 10:12:42 localhost kernel[0]: MAC Framework successfully initialized
    Jul 28 10:12:42 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    Jul 28 10:12:42 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
    Jul 28 10:12:42 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Jul 28 10:12:42 localhost kernel[0]: PFM64 0xf10000000, 0xf0000000
    Jul 28 10:12:42 localhost kernel[0]: [ PCI configuration begin ]
    Jul 28 10:12:42 localhost kernel[0]: console relocated to 0xf10010000
    Jul 28 10:12:42 localhost kernel[0]: PCI configuration changed (bridge=3 device=1 cardbus=0)
    Jul 28 10:12:42 localhost kernel[0]: [ PCI configuration end, bridges 6 devices 18 ]
    Jul 28 10:12:42 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 13:08:12 Jun 18 2011) initialization complete
    Jul 28 10:12:42 localhost kernel[0]: Sleep failure code 0x00000000 0x1f006500
    Jul 28 10:12:42 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 60fb42fffef17f9a; max speed s800.
    Jul 28 10:12:42 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
    Jul 28 10:12:42 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jul 28 10:12:42 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    Jul 28 10:12:42 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    Jul 28 10:12:42 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    Jul 28 10:12:42 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    Jul 28 10:12:42 localhost kernel[0]: 2.4.0 Little Snitch: starting
    Jul 28 10:12:42 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    Jul 28 10:12:42 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    Jul 28 10:12:42 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
    Jul 28 10:12:42 localhost kernel[0]: BTCOEXIST off
    Jul 28 10:12:42 localhost kernel[0]: wl0: Broadcom BCM432b 802.11 Wireless Controller
    Jul 28 10:12:42 localhost kernel[0]: 5.100.98.75
    Jul 28 10:12:42 localhost kernel[0]: CoreStorage: fsck has finished successfully for lvg "9EE70322-2538-4C97-ABBF-840E47EC5495"
    Jul 28 10:12:42 localhost kernel[0]: thr 0xffffff801357da40 cs_thread_create thread=0xffffff8013beac68 arg=0xffffff8013bea800
    Jul 28 10:12:42 localhost kernel[0]: thr 0xffffff801357da40 cs_thread_create thread=0xffffff8013beaee0 arg=0xffffff8013bea800
    Jul 28 10:12:42 localhost kernel[0]: rooting via boot-uuid from /chosen: 8AAB677E-1234-3FCA-A115-09A923BB759D
    Jul 28 10:12:42 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Jul 28 10:12:42 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/OWC Mercury Extreme Pro SSD Media/IOGUIDPartitionScheme/X X X@2/CoreStoragePhysical/CoreStorageGroup/X X X@s0
    Jul 28 10:12:42 localhost kernel[0]: BSD root: disk1, major 14, minor 4
    Jul 28 10:12:42 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 12953088 to: 16393216 (joffset 0x37e000)
    Jul 28 10:12:42 localhost kernel[0]: jnl: unknown-dev: journal replay done.
    Jul 28 10:12:42 localhost kernel[0]: Kernel is LP64
    Jul 28 10:12:42 localhost kernel[0]: hfs: Removed 53 orphaned / unlinked files and 3052 directories
    Jul 28 10:12:43 localhost kernel[0]: NVEthernet: Ethernet address 60:fb:42:f1:7f:9a
    Jul 28 10:12:43 localhost kernel[0]: AirPort_Brcm4331: Ethernet address 00:26:bb:18:46:7c
    Jul 28 10:12:43 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    Jul 28 10:12:43 localhost kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    Jul 28 10:12:45 localhost kernel[0]: Created virtif 0xffffff8015054000 p2p0
    Jul 28 10:12:45 localhost kernel[0]: NVDANV50HAL loaded and registered.
    Jul 28 10:12:45 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    Jul 28 10:12:45 localhost kernel[0]: Previous Shutdown Cause: -128
    Jul 28 10:12:45 localhost kernel[0]: DSMOS has arrived
    Jul 28 10:12:46 localhost kernel[0]: jnl: disk2s3: replay_journal: from: 24017408 to: 5658624 (joffset 0x6ff000)
    Jul 28 10:12:46 localhost kernel[0]: macx_swapon SUCCESS
    Jul 28 10:12:46 localhost kernel[0]: 00000000  00000020  NVEthernet::setLinkStatus - not Active
    Jul 28 10:12:48 Super-Bad-Dude kernel[0]: nspace-handler-set-snapshot-time: 1311844369
    Jul 28 10:12:48 Super-Bad-Dude kernel[0]: en1: 802.11d country code set to 'US'.
    Jul 28 10:12:48 Super-Bad-Dude kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    Jul 28 10:12:48 Super-Bad-Dude kernel[0]: AppleLMUController found an AG vendor product (0x9cb1), notifying SMC.
    Jul 28 10:12:48 Super-Bad-Dude kernel[0]: MacAuthEvent en1   Auth result for: 94:44:52:70:30:88  MAC AUTH succeeded
    Jul 28 10:12:48 Super-Bad-Dude kernel[0]: wlEvent: en1 en1 Link UP
    Jul 28 10:12:48 Super-Bad-Dude kernel[0]: AirPort: Link Up on en1
    Jul 28 10:12:48 Super-Bad-Dude kernel[0]: en1: BSSID changed to 94:44:52:70:30:88
    Jul 28 10:12:49 Super-Bad-Dude kernel[0]: AirPort: RSN handshake complete on en1
    Jul 28 10:12:49 Super-Bad-Dude kernel[0]: en1: DAD detected duplicate IPv6 address fe80:0005::0226:bbff:fe18:467c: NS in/out=1/1, NA in=0 inx=0
    Jul 28 10:12:49 Super-Bad-Dude kernel[0]: en1: DAD complete for fe80:0005::0226:bbff:fe18:467c - duplicate found
    Jul 28 10:12:49 Super-Bad-Dude kernel[0]: en1: manual intervention required
    Jul 28 10:12:49 Super-Bad-Dude kernel[0]: en1: possible hardware address duplication detected, disable IPv6
    Jul 28 10:12:53 Super-Bad-Dude kernel[0]: nstat_lookup_entry failed: 2
    Jul 28 10:12:56 Super-Bad-Dude kernel[0]: jnl: disk2s3: journal replay done.
    Jul 28 10:13:02 Super-Bad-Dude kernel[0]: hfs: Removed 0 orphaned / unlinked files and 888 directories
    Jul 28 10:18:51 Super-Bad-Dude kernel[0]: hfs: cat_lookup_siblinglinks: getkey for 2392900 failed 2
    Jul 28 10:23:00 Super-Bad-Dude kernel[0]: 00000000  00000020  NVEthernet::setLinkStatus - not Active
    Jul 28 10:23:00 Super-Bad-Dude kernel[0]:
    Jul 28 10:23:13 Super-Bad-Dude kernel[0]: Wake reason: EC LID0
    Jul 28 10:23:13 Super-Bad-Dude kernel[0]: HID tickle 0 ms
    Jul 28 10:23:13 Super-Bad-Dude kernel[0]: Previous Sleep Cause: 5
    Jul 28 10:23:13 Super-Bad-Dude kernel[0]: wlEvent: en1 en1 Link DOWN
    Jul 28 10:23:13 Super-Bad-Dude kernel[0]: AirPort: Link Down on en1. Reason 4 (Disassociated due to inactivity).
    Jul 28 10:23:13 Super-Bad-Dude kernel[0]: en1: 802.11d country code set to 'X3'.
    Jul 28 10:23:13 Super-Bad-Dude kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    Jul 28 10:23:14 Super-Bad-Dude kernel[0]: 00000000  00000020  NVEthernet::setLinkStatus - not Active
    Jul 28 10:23:41: --- last message repeated 1 time ---
    Jul 28 10:23:41 Super-Bad-Dude kernel[0]:
    Jul 28 10:24:09 Super-Bad-Dude kernel[0]: Wake reason: EC LID0
    Jul 28 10:24:09 Super-Bad-Dude kernel[0]: HID tickle 0 ms
    Jul 28 10:24:09 Super-Bad-Dude kernel[0]: Previous Sleep Cause: 5
    Jul 28 10:24:10 Super-Bad-Dude kernel[0]: 00000000  00000020  NVEthernet::setLinkStatus - not Active
    Jul 28 10:24:12 Super-Bad-Dude kernel[0]: en1: 802.11d country code set to 'US'.
    Jul 28 10:24:12 Super-Bad-Dude kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    Jul 28 10:24:17 Super-Bad-Dude kernel[0]: MacAuthEvent en1   Auth result for: 94:44:52:70:30:88 Auth timed out
    Jul 28 10:24:19 Super-Bad-Dude kernel[0]: MacAuthEvent en1   Auth result for: 94:44:52:70:30:88  MAC AUTH succeeded
    Jul 28 10:24:19 Super-Bad-Dude kernel[0]: wlEvent: en1 en1 Link UP
    Jul 28 10:24:19 Super-Bad-Dude kernel[0]: AirPort: Link Up on en1
    Jul 28 10:24:19 Super-Bad-Dude kernel[0]: en1: BSSID changed to 94:44:52:70:30:88
    Jul 28 10:24:20 Super-Bad-Dude kernel[0]: AirPort: RSN handshake complete on en1

    All sorts of ways. Nothing here helped. Went into the store and the consensus is a faulty / failed logic board. Although on my first visit I was sent back home because the company doesn't support self installed SSDs, on my second visit Alex and his manager have graciously agreed to replace be part and weave the fee for me despite expired AppleCare. This is great. I am chuffed. Problem solved, hopefully. Thanks to Apple &amp; it's professional and efficient staff.

  • Firefox will not open because of this error message...[JavaScript Application] Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref]

    when this error box opens the only way to close it is to shut the firefox process

    Some how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
    firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none

  • Error in getValue: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getComplexValue]" nsresult: "0x8000ffff (NS_

    This error keeps popping up every couple of minutes.
    Error in getValue: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getComplexValue]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: chrome://socialfixer/content/prefman.js :: <TOP_LEVEL> :: line 18" data: no]

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Windows 7 Startup Problem - Error code 0x490

    Hey, I recently successfully installed Windows 7 on my laptop that also has Windows Vista. I was playing around with it for a few hours last night, shut off the computer and went to bed. I woke up, started it successfully and played around with it some more. Then, I shut it off again, and, a few hours later, turned it back on and, when I click on Windows 7, I am now receiving an error message telling me I did not install properly and to run a Repair with the install disc.
    I did this and it said it found a problem and to "restart immediately" by clicking finished (it does not restart immediately, I have to click finish and then click restart). It also states that if the problem wasn't solved it would run the repair automatically. I restart it, it boots up and does the same thing. I ran the repair again and checked the detailed list of errors. It lists off a bunch of successful tests completed and then at the bottom it says:
    "Boot manager generic failure 0x000000e
    Root cause found:
    Boot manager failed to find OS Loader
    Repair action: File Repair
    Result: Failed. Error Code = 0x490
    Time taken : 7099 ms
    Repair Action: Boot configuration data store repair
    Result: Failed. Error code = 0x490
    Time Taken: 171ms
    Repair action: System Restore
    Result: Completed Successfully..."
    And that's it. I was getting the same error message when I had failed to install it correctly, but I fixed it (I think by resetting my BIOS). So, does anyone know how to fix this?
    UPDATE:
    When I select windows 7, it gives me instructions (which I followed, they are the steps I mentioned above) and at the bottom it says:
    "Info: The boot selection failed because a required device is inaccessible"
    I assume this means that it cannot access my partition for some reason...? If so, why not? Thanks!

    I've tried all these repair fixes and they went through and where done but it didn't repair the problem. I bought a 3TB USB 3.0 hard drive and backed up my system. Then the backup program formated the hard drive which I didn't want it to do that. It tried
    doing a restore and came up with an error at about 55%. Some how I got it to install Windows 7 and did updates. I don't remember if I restarted it just yet. When I did do a restart it started the problem again. So I don't know if I ever got it working the
    one time. I did install several programs and went to install one driver and think that may have caussed the problem because it was for NT and not Windows 7 64 bit. When I did get the right driver and installed it I noticed it changed how it looked on the device
    manager. I don't know if the device driver I added was the cause of the problem, it was for an external hard drive using a eSATA board. There are bois on the board and that comes up when the computer is starting. I took everything I installed out of the compter
    even took out the mSATA board out. The repair message says that it booted fine but something happened and gives the 0x490 error code. I've notice this seem to be a rather big problem. When I tried running check disk it couldn't run in the repair program. I
    also tried runing Check NTFS and that gave me the same messaage, couldn't run the program in repair. There's a lot of  programs that won't run in repair. I've tried booting up to go to the DOS prompt but never got there and it went into repair. There's
    a blue screen of death that goes by real fast. I used the start up menu when you press F8 to stop on errors and it stopped one time at the blue screen where I copied down the numbers. Many restarts and finally I got it to stop after the blue screen and it
    was the same numbers as the first time. Not sure what to do with those four numbers. I'm wondering if they are from each CPU. What's real odd if I was able to boot up to several versions of Linux and the computer runs fine. It's just starting up in windows
    7 is the problem. I haven't been able to run the boot menu program to see what it was doing. My computer has been down 180 days now but works fin in Linux. So I've been using the Linux OS program to search for help. I spend days reading the same fixes and
    never find anything new to try. I used a Linux Boot Repair program and it didn't change anything. Well, going to boot up to the Boot Repair program and see if that makes a difference. That comes as an ISO file that's 600megs. The first boot repair program
    was part of another OS disk.

  • Exception... "Component returned failure code: 0x80004003 (NS_ERROR_INVALID_POINTER) en boucle avec Firefox 9

    Since I ave installed Firefix 9, my error console is filling itself with the following message :
    Erreur : uncaught exception: [Exception... "Component returned failure code: 0x80004003 (NS_ERROR_INVALID_POINTER) [nsIDOMLocation.href]" nsresult: "0x80004003 (NS_ERROR_INVALID_POINTER)" location: "JS frame :: chrome://fvd/content/af.js :: <TOP_LEVEL> :: line 21" data: no]
    This, whatever website I visit including html pages on my computer!
    And I couldn't find a way to reinstall Firefox 8

    Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode

  • Firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none

    I restored my computer to earlier time and I did an other restore but to latest time and since then every time I click on Firefox short cut this window comes up with the same cod and I can not turn it off unless turn off or restart my laptop, I did delete the Firefox few times and reinstalled it but did not change anything, still I get the same cod,
    Error on switching in renew:
    NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref]
    id: none

    Some how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
    firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none

  • Component returned failure code: 0x8000ffff

    Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.lockPref]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: prefcalls.js :: lockPref :: line 109" data: no
    Didn't have this error until incorporated mozilla.cfg file. One of the settings must be causing this and I can't figure out which.
    Here is cfg info:
    ''# Mozilla Global Preferences
    /* This file is to set and lock default preferences.
    * Locate the settings in the prefs.js you want to make global and
    * copy them here. To lock the setting change the Pref to
    * lockPref.
    lockPref("accessibility.browsewithcaret", false); //dont' use cursor keys to navigate within pages
    defaultPref("accessibility.typeaheadfind", true); //Search for text when I start typing
    defaultPref("accessibility.typeaheadfind.flashBar", 0); //don’t flash toolbar when text is found
    lockPref("general.autoScroll", false); //don't use autoscrolling
    lockPref("app.update.auto", false); //disable automatic update
    lockPref("app.update.enabled", false); //disable updating Firefox
    lockPref("browser.bookmarks.restore_default_bookmarks", false); //restore default firefox bookmarks
    defaultPref("browser.cache.disk.capacity", 1048576); //cached settings
    defaultPref("browser.cache.disk.smart_size.first_run", false); //cached settings
    defaultPref("browser.cache.disk.smart_size_cached_value", 1048576); //cached settings
    lockPref("browser.download.useDownloadDir", false); //don't use download directory-always ask
    defaultPref("browser.download.manager.retention", 0); //remember downloads
    lockPref("browser.feeds.showFirstRunUI", false); //disable initial RSS intro
    defaultPref("browser.formfill.enable", true); //don't remember forms and search bar
    lockPref("browser.fullscreen.autohide", false); //always show URL and tab bar
    lockPref("browser.history_expire_days", 30); //clear history after 30 days
    lockPref("browser.history_expire_days_min", 30); //minimum 30 days to keep history
    lockPref("browser.link.open_external", 1); // open pages in new tab
    lockPref("browser.link.open_newwindow", 1); // open pages in new tab
    lockPref("browser.places.importBookmarksHTML", false); //don't import bookmarks
    lockPref("browser.places.importDefaults", false); //don't import other default settings
    lockPref("browser.rights.3.shown", true); //don't show copyright notice
    defaultPref("browser.search.suggest.enabled", true); //disable search suggestions
    lockPref("browser.shell.checkDefaultBrowser", false); //disable default browser check
    lockPref("browser.startup.page", 1); //show homepage at startup
    lockPref("browser.startup.homepage", "http://intranet.domain.com"); //home page URL
    pref("browser.tabs.autoHide", false); //always show tab bar
    defaultPref("browser.tabs.insertRelatedAfterCurrent", false); //load new tabs last
    defaultPref("browser.tabs.loadBookmarksInBackground", true); //new tabs in background
    defaultPref("browser.tabs.warnOnClose", false); //Warn when closing multiple tabs
    defaultPref("browser.tabs.warnOnOpen", false); //don't warn on opening multiple tabs
    lockPref("browser.taskbar.previews.enable", true); //enable taskbar previews
    defaultPref("browser.urlbar.autoFill", true); //enable URL autocomplete
    lockPref("config.lockdown.disable_themes", true); //disable themes
    lockPref("general.smoothScroll", true); //Use smooth scrolling
    lockPref("general.warnOnAboutConfig", true); //display warning prompt
    defaultPref("layout.spellcheckDefault", 1); //Check my spelling as I type
    lockPref("mozilla.widget.raise-on-setfocus"); //disable focus stealing
    defaultPref("mozilla.widget.raise-on-setfocus", false); //don't focus new tabs
    lockPref("network.automatic-ntlm-auth.trusted-uris", "proxy,domain"); //sites that are allowed to automatically authenticate via NTLM
    lockPref("network.cookie.lifetimePolicy", 2); //keep cookies until I close Firefox
    lockPref("network.cookie.prefsMigrated", true); //don't prompt to migrate cookies
    lockPref("network.negotiate-auth.delegation-uris", "proxy");
    lockPref("network.negotiate-auth.trusted-uris", "proxy"); //sites that are permitted to engage in SPNEGO authentication with the browser
    defaultPref("network.http.max-connections-per-server", 32); //sites for which the browser may delegate user authorization to the server
    defaultPref("network.http.pipelining", true); //enable HTTP pipelining
    defaultPref("network.http.pipelining.maxrequests", 7); //max http requests
    defaultPref("network.http.pipelining.ssl", true); //always enable HTTPS pipelining
    defaultPref("network.http.proxy.pipelining", true); //enable HTTP pipelining
    pref("network.proxy.type", 4); //auto-detect proxy settings
    lockPref("pref.privacy.disable_button.view_passwords", true); //Disable the Show Passwords Button
    lockPref("privacy.donottrackheader.enabled", true); //no targeted ads
    lockPref("privacy.item.formdata", true); //clear saved form data
    lockPref("privacy.item.offlineApps", true); //clear offline apps data
    lockPref("security.enable_ssl3", true); //Use SSL 3.0
    lockPref("security.enable_tls", true); //Use TLS 1.0
    defaultPref("security.warn_entering_weak", false); //warn when about to view a page that uses low-grade encryption
    defaultPref("security.warn_viewing_mixed", true); //warn when about to view an encrypted page that contains some unencrypted information
    defaultPref("security.warn_entering_secure", false); //warn when about to view an encrypted page
    defaultPref("security.warn_leaving_secure", true); //warn when leave an encrypted page for one that isn't
    defaultPref("security.warn_submit_insecure", true); //warn when submit information that's not encrypted
    lockPref("signon.rememberSignons", false); //don't remember passwords
    lockPref("toolkit.telemetry.prompted", false); //don't show send info to mozilla prompt
    defaultPref("view_source.wrap_long_lines", true); //enable line wrapping
    lockPref("xpinstall.whitelist.required", true); //Warn when sites try to install add-ons''

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Since the latest update, when I open Firefox , I get an "Exception..."Component returned failure code: 0x80004005....skype..ff_extension/content/browser Overlay.js

    Within the past few days when there was a Firefox update, every time I start Firefox, I get the following message (shortened in the middle): Exception..."Component returned failure code: 0x80004005...skype_ff.extension/content/browser Overlay.js"
    When I clicked on a link on the US Bank website, I received [Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [ISkypeFfExtension.Initialize]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chrome://skype_ff_extension/content/browserOverlay.js :: <TOP_LEVEL> :: line 9" data: no]
    In both cases, if I click OK, the process I requested then takes place. What do I need to do?

    If you're having this issue open Firefox, go to Tools on the Firefox tabs at the top of your browser window, and click on Add-ons. This will take you to your Add-ons page. Click on Extensions on the right side of the screen and scroll down to the Skype extension add-on. Click on "Disable" to disable this extension. Once this extension is disabled your problem should be fixed. In my case it repaired the problem.

  • I keep getting the following error message when using Firefox: Component returned failure code: 0x80040111 (NS_ERROR_NOT_AVAILABLE) [nsIDOMJSWindow.setTimeout]

    Whenever I leave a close a tab the error message - Component returned failure code: 0x80040111 (NS_ERROR_NOT_AVAILABLE) [nsIDOMJSWindow.setTimeout] - appears. Sometimes multiple copies of the same message appear

    It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

  • Start up problems, including from installation disc.

    Hello everyone in the Apple ether, I need your help!
    I have a powerpc based iMac G5 at home that I set up for my mum to use once I bought my macbook. I finally managed to win her over with talks of how much easier it would be for her to manage her photos in iPhoto, and everything was going really well. I recently came home after my final year at uni and some travelling to find that the computer is taking a long time to start up. This can be in both the grey apple loading screen but also once it logs in it can take a long time to display anything over than the desktop background, and even once it displays other items any attempt to open anything just results in a spinning wheel icon. At the worst case it has taken about 20 minutes to get going.
    Once it has fully booted, the machine doesn't appear to be working any slower than normal. I tried using disk utility in mac OSX and verifying permissions etc and that didn't do anything. I then tried googling the problem and came across this article on the apple web site. http://support.apple.com/kb/TS1417
    Starting in Safe Mode did not resolve the issue so after backing everything up I tried starting from the installation disc. This is not something I have ever done before and as someone that never really delves beneath the surface of her machines I was a bit scared of doing it. But I put the disc in and restarted and held down C just after I heard the chime, and shortly after it all went wrong. The screen went grey and all I could see was the image you get when it crashes (you know, the power sign with text over it saying you need to restart) with lines of code all down the left of the screen. I took a photo of the screen on my camera so can give details of the code if you need them. The last line said
    Kernel version:
    Darwin Kernel Version 8.8.3: Wed Oct 18 22:00:38 PDT 2006; root:xnu-792.15.4.obj-4/RELEASE_PPC
    panic: We are hanging here...
    After a few minutes on this screen the fan started working overtime and after about 5 minutes of that I just turned it off using the power button on the back. The machine has since started up normally (ie slowly) but is working fine.
    So I was wondering if anyone had any ideas how to fix the slow start up problem without booting from my install disc, or indeed if anyone could suggest why I can't boot from my install disc? Thanks very much for your time and help.

    It appears you experienced a kernel panic which is hardware related. A few suggestions for you to try:
    Except for the keyboard & mouse, disconnect all devices from the computer & try the suggestions mentioned in the following:
    http://docs.info.apple.com/article.html?artnum=106805 Mac OS X: "Broken folder" icon, prohibitory sign, or *kernel panic* when computer starts
    User Tips: Kernel Panics
    ==============
    Boot up from your Tiger or Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose *"Disk Utility"* from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the *"repair disk"* button in the right hand section of the window.
    Once this process has been completed restart your computer and run *repair permissions* from Disk Utility.
    * If Disk Utility (from the install DVD or HD)is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
    =============
    How much HD space is left on the iMac?
    How much RAM is installed?
    ==============
    Which "model" & "generation" G5 iMac does your mother have?
    Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
    http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
    You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
    Thank you

  • By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.

    By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.

    Sometimes the Adobe servers used for the updates can get busy and it’s necessary to try a couple of times. Also make sure you don’t have a firewall which may be blocking the connection. It sometimes helps to temporarily disable internet security/anti-virus software. Because the Organizer is shared by both programs it often helps to do the PSE update first, followed by the PRE update in that order.
    Select the 12.1 update for PSE from the updater dialog and ensure everything else is unchecked.  Quit PSE and PRE if you have it running and then start the update.
    If PSE updates properly to 12.1 repeat the process for PRE.

Maybe you are looking for

  • User not displaying in Hyperion Planning 11.1.1.3

    Hi All, i have create users in Shared Services and assign provison on Planning application. after this i log in to planing when i m trying to assign access on perticuler dimention Assign Access>>add Access under this user and group tab user is not di

  • Transfer data from dot net to sap system

    Hi gurus! please , help me out , i wanna transfer data from dot net to sap system. i have no idea abt it. Points can be given sure!!!!!! Rahul Deshmukh

  • Oracle Delivers Truncating Report

    I have a report showing data with totals being sent out by Oracle Delivers. So far report has been sent out with all information including totals. Over past few days the report was sent out with no totals. For some reason that is being truncated or o

  • I just bought an iPhone 4s. Siri is not on it, how do I activate Siri

    How do I get Siri on my iPhone 4s, it is not there.

  • Notification at start

    Hi, Something happened to my Dreamweaver. I have two (or more) problems. first; every time I open the program a notification appears (see att. no.20.11.png) and then every time I try to open a document from my site I am working on, this occurs (see a