Start up problem for CQ56-219WM

At start up red screen blinks with message press escape key for stop up menu. Performed all test which passed. Cannot perform a system recovery. Nothing happens

I have the same issue and can not figure out how to fix, Can you help me or let me know if it can be fixed

Similar Messages

Insyde BIOS for CQ56-219wm

I have a CQ56-219wm. It runs Insyde BIOS version F.14.
I went to the download page, but all that is available there is a UEFI version, sp51327, or an older one, sp50291. But both say they are UEFI.
I installed sp51327, but it did nothing to the actual BIOS. It seems to be a support platform for BIOS extensibility.
Where can I get the Insyde BIOS for this unit? I'm having hardware problems and the flash is my last hope.
Thanks.

Hi @paul1149
I grasp you are having some hardware problems and have updated the bios but there was no change. The sp51327 is the latest recommended bios update for your notebook.
I suggest you try restoring the bios.
Here is a link to assist you. Restoring the BIOS
As you are having a hardware issues you may want to test for hardware failures.
Testing for Hardware Failures (Windows 7, Vista)
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Start up problems for my pc

Desktop computer: Product no. KQ497AA-ABA
Operating system: Windows Vista
Question: Does anyone know how to fix startup issues when you have to push the button on the top of the computer to turn on and off a lot of times to get the computer to move from the blue HP screen (the one for escape to start, system recovery etc.) and load? Also, my computer will not stay on more than 10 or 15 minutes. It will shut off and try to restart, leaving it stuck on the blue screen again. I'd sure appreciate any help!
This question was solved.
View Solution.

Hi rosco112, i could'nt trace your product by the number you have posted, could you please find the number by the following instructios:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07555&lc=en&cc=il&dlc=en
Thanks, Adi.
I'm an HP Employee
-Please mark Accept As Solution if it solves your problem
-Please click the Kudos Thumbs up if you would like to say thanks

How much does it cost to get a webcam installed on a presario CQ56-219wm from HP?

Just Purchased a Presario CQ56-219wm, thought it had a webcam installed, obviously it doesn't ; fooled like many others. How do I get one installed from HP and how much does it cost? Where do you send the computer and how long does it take? Estimates coming from San Antonio, TX. Thanks

Hi ezpowell,
This laptop doesn't come with a webcam as a hardware item on the specifications. Did you see in the computer specifications that this laptop had a webcam installed?
Specifications for CQ56-219wm:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02636087&tmp_task=prodinfoCategory&cc=us&dlc=en...
If you need a webcam you can purchase one from several companies, and then install it to the laptop. Click the link below for some prices on webcams from newegg.com.
http://www.newegg.com/store/SubCategory.aspx?SubCategory=152&Tpk=Webcam
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Bios password started showing up on a presario cq56 -219wm laptop

I am working on a Presario CQ56-219wm which suddenly started asking for a bios pasword (Enter Administrator Password). If I hit enter 3 times, it give me the code of 82026917. I know this is a motherboard fault causing this, can some one please give me the code to get into this so I can reset the password in bios? Appreciate any one's help in advance.

Alright I am working on the same exact laptop (Compaq Presario CQ56-219WM) and I am also trying to get into the BIOS and it is saying the same thing (Enter Administrator Password) I don't have a password set up on this and I am the only administrator. After 3 times of guessing it then says (System Disabled 53546280) What do I do?

After seeing the production in London I purchased the whole sound track and it did not completely load. I've never had this problem Today I am downloading an album only to find out it's missing the voacals. Do I have to start just settling for this kinds

After seeing the production of Matilda in London I purchased the whole sound track and it did not completely load. I've never had this problem before so I just forgot about it. Today I am downloading an album only to find out it's missing the voacals. Do I have to start just settling for these kinds things. I'm feeling taken.

Hello MarkFKenny,
If you feel that there is an issue with a purchase made, you can report an issue with said purchase to the folks in our iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

I've had creative cloud installed and subscribed for more than a year. Recently I started getting problems and couldn't launch PS. This evening while trying to fix the problem I've managed to do something and now I can't launch either LR or PS. I get an e

I've had creative cloud installed and subscribed for more than a year. Recently I started getting problems and couldn't launch PS. This evening while trying to fix the problem I've managed to do something and now I can't launch either LR or PS. I get an error message about verifying my subscription when I click and get my subscription verified it ays "OK" and I clock to to application and then it jumps back to verification needed - and so it goes on and on and on and..

Here are two other examples of this happening..
I expected more from Apple.
https://discussions.apple.com/thread/6919109
https://discussions.apple.com/thread/6683814

Please how can i fix my DVD problem for window 7 cq56

how can i fix my DVD problem for cq 56 107 SA windows 7? it is selecting disc.

What is the problem... can you please tell us in detail???
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Cq56-219wm boot disk for new hard drive

I replaced my hard drive in my cq56-219wm laptop. the screen says, "No bootable device --insert boot disk and press any key. I dont have a disk. How can I download the proper disc and try that?

Bill.
Recovery Kit here.
https://h10025.www1.hp.com/ewfrf/wc/mediaOrder?softwareitem=640123-001&cc=us&dlc=en&lc=en&os=4063&pr...
Or here.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Compaq Presario CQ56-219WM keyboard frequently misses letters when I am typing

When I am typing on my Compaq Presario CQ56-219WM I frequently miss letters and spaces. I have a USB keyboard plugged in, but the missing letters happens on both the laptop's keyboard and the USB keyboard. I did not notice this issue happening before I installed a Plugable USB 2.0 Universal Laptop Docking Station. However, I am a bit baffled since this problem happens even when the docking station is not connected and I am just using the integrated notebook keyboard.
I use Windows 7 Home Premium.
Would someone be able to tell me what to do, if anything, to resolve this issue? It's really frustrating to have to constantly spell check to try and catch the errors!

Hi MrsJP. Try updating the BIOS in your notebook. Go to this link http://goo.gl/rk8CV and select which version of Windows 7 you are using and click next. It will display all downloads available for your notebook, including the BIOS update.
Here http://goo.gl/wTZr6 is a document that will hopefully answer any questions about finding and updating/installing your BIOS.
Please let me know if this fixes your issue or if you need anything else.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Start up problems, including from installation disc.

Hello everyone in the Apple ether, I need your help!
I have a powerpc based iMac G5 at home that I set up for my mum to use once I bought my macbook. I finally managed to win her over with talks of how much easier it would be for her to manage her photos in iPhoto, and everything was going really well. I recently came home after my final year at uni and some travelling to find that the computer is taking a long time to start up. This can be in both the grey apple loading screen but also once it logs in it can take a long time to display anything over than the desktop background, and even once it displays other items any attempt to open anything just results in a spinning wheel icon. At the worst case it has taken about 20 minutes to get going.
Once it has fully booted, the machine doesn't appear to be working any slower than normal. I tried using disk utility in mac OSX and verifying permissions etc and that didn't do anything. I then tried googling the problem and came across this article on the apple web site. http://support.apple.com/kb/TS1417
Starting in Safe Mode did not resolve the issue so after backing everything up I tried starting from the installation disc. This is not something I have ever done before and as someone that never really delves beneath the surface of her machines I was a bit scared of doing it. But I put the disc in and restarted and held down C just after I heard the chime, and shortly after it all went wrong. The screen went grey and all I could see was the image you get when it crashes (you know, the power sign with text over it saying you need to restart) with lines of code all down the left of the screen. I took a photo of the screen on my camera so can give details of the code if you need them. The last line said
Kernel version:
Darwin Kernel Version 8.8.3: Wed Oct 18 22:00:38 PDT 2006; root:xnu-792.15.4.obj-4/RELEASE_PPC
panic: We are hanging here...
After a few minutes on this screen the fan started working overtime and after about 5 minutes of that I just turned it off using the power button on the back. The machine has since started up normally (ie slowly) but is working fine.
So I was wondering if anyone had any ideas how to fix the slow start up problem without booting from my install disc, or indeed if anyone could suggest why I can't boot from my install disc? Thanks very much for your time and help.

It appears you experienced a kernel panic which is hardware related. A few suggestions for you to try:
Except for the keyboard & mouse, disconnect all devices from the computer & try the suggestions mentioned in the following:
http://docs.info.apple.com/article.html?artnum=106805 Mac OS X: "Broken folder" icon, prohibitory sign, or *kernel panic* when computer starts
User Tips: Kernel Panics
==============
Boot up from your Tiger or Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose *"Disk Utility"* from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the *"repair disk"* button in the right hand section of the window.
Once this process has been completed restart your computer and run *repair permissions* from Disk Utility.
* If Disk Utility (from the install DVD or HD)is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
=============
How much HD space is left on the iMac?
How much RAM is installed?
==============
Which "model" & "generation" G5 iMac does your mother have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you

Start up problems with G4 powerbook

hello all,
My Powerbook appears to start up fine, but about 3 mins after my desktop appears the system freezes. I can open applications in the first few mins but no mater what I do after a couple of mins the spinning ball appears. When this happens I can't even use the keyboard commands such as force quit.
What I find particularly odd, is that when the computer freezes it continues to sound like its processing something, but the only thing I can do is shut down the computer and restart it.
There is plenty of space on the hard drive and I do regular disk utilities and use mac janitor, so there appears to be no clear hardware or software problems.
Any suggestions as to what wrong would be very welcome!
Thanks!

Activity Monitor is a good place to start.
Can you relate the problem to your starting up a particular application?
What happens if you log in and don't start any applications for, say, 5-10 minutes?
Have you been getting crash reports when you log back in? You might try to use that three minutes to look at the most recent crash log (in ~/Library/Logs/CrashReporter/). Whatever application's log is most recent may point you in the right direction.
Also, you can access the console log through the Console utility (in the Applications/Utilities folder). That may tell you what was the last thing your Mac thinks it was doing.
Let us know what you find.

What is the Firefox start page looking for when it tells me I'm not using the most current version and need to update Firefox? The check for updates button says my version is up to date, but the start page disagrees. Is there a setting I need to adjust?

Okay: My start page is the one Google provides: http://www.google.ca/firefox?client=firefox-a&rls=org.mozilla:en-US:official and frequently it has a note underneath the search box that "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" But when I check for updates on the About Firefox window, it says my Firefox is up to date. So what is the start page looking for? Is there some setting I need to adjust? Or is this a Google marketing ploy to get me to switch to Chrome?

I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
I hope this helps some people.

Start a workflow for a list item that was created by someone else

What settings do I need to change so that I can start a workflow for a list item created by another user?
I have a SharePoint 2013 workflow (let's call it LSR Status Workflow) that is associated with a list (called
LSR List). When a user creates an item in the LSR List, it automatically starts the
LSR Status Workflow. That is what I wanted, but sometimes I make changes to the workflow (via SharePoint designer) and then I would want to terminate the existing workflows that are running and restart them.
When I try to start a workflow for anyone other than a list item that I created, I get the following error:
Retrying last request. Next attempt scheduled in less than one minute. Details of last request: HTTP NotFound to https://publishing.web.company.com/sites/mysite/_vti_bin/client.svc/web/lists/getbyid(guid'1f844b8f-19aa-4587-bcc2-dfb7085f36b5')/Items(31)
Correlation Id: 8efc5304-f0a3-90f6-8ece-6875bf811869 Instance Id:
60c83aae-5c25-4ee8-9c85-c64958ba701e
Then when the workflow is finally suspended after it keeps retrying, it reports the following error:
RequestorId: 8efc5304-f0a3-90f6-0000-000000000000. Details: An unhandled
exception occurred during the execution of the workflow instance.
Exception details: System.ApplicationException: HTTP 404
{"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["36"],"SPRequestGuid":["8efc5304-f0a3-90f6-9bbd-d18d4d90af1b"],"request-id":["8efc5304-f0a3-90f6-9bbd-d18d4d90af1b"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4551"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Tue,
10 Feb 2015 22:36:44
GMT"],"Set-Cookie":["BIGipServerpublishing-blv-80-pool=2825582466.20480.0000;
path=/"],"Server":["Microsoft-IIS/7.5"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at
Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext
context) at
System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at
System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)
If I created the list item, I can stop it and restart it without any problems, but this is not the case for list items created by someone else.
What settings do I need to change so that I can start a workflow for a list item created by another user? I am the owner of the SharePoint site and am able to make changes to permissions if needed.

You don't need to re-do the fields. If you create a new version of the PDF
file just open the old one and use the Replace Pages command to insert the
pages from the new version over the old ones. This will give you a new
version of the file, with the existing form fields still in tact. Of
course, you might need to adjust their location and/or size, but at least
you won't have to start all over again...
On Thu, Jan 22, 2015 at 11:59 PM, Laura Holancin <[email protected]>

Start up problem for CQ56-219WM

Similar Messages

Maybe you are looking for