Start-up problem keys won't work

Hello out there,
I have another start-up problem with a G5 2.0 GHz (7.2).
I can't use any start-up keys (such as holding c oder s).
I can't reset PRAM. Starting from CD works only when I unplug the hard drive. The keyboard works fine than.
Any suggestions?
Thanx
Thorsten
all from G3 to G5   Mac OS X (10.4.9)  

I found an answer by myself.
Holding the power button after switching on brings you to the open firmware.
Now you can type:
reset-nvram [enter]
reset-all [enter]
After that the startup keys worked again.
Sometimes it's useful to refine your search

Similar Messages

  • Page Up and Down keys won't work - have tried everything

    My Page Up and Down keys won't work. I've tried hitting F7, the Fn key, checked that the "Always use cursor keys to navigate" box is not selected in the Advanced Options tab and made sure that the "Use autoscrolling" tab is selected. I tried uninstalling and re-installing Firefox, tried hitting buttons F1 through to F12 and then checked that accessibility.warn_on_browsewithcaret is set to 'true'.
    It also won't work in Internet Explorer - I have no idea what else to try. My Up/Down arrows are working, just not the Page Up/Page Down buttons. Please help, this is driving me nuts. It's only just started happening; I've never had a problem with it before!

    What is the value of the pref [http://kb.mozillazine.org/accessibility.browsewithcaret accessibility.browsewithcaret] on the about:config page?
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Hi, iPak II user.  Two keyboard keys won't work, and the picture goes haywire sometimes, flashing itself, bak to old stuff, typing in the safari line, all this going on vey fast.   Any fixes out there?

    Hi, iPak II user.  Two keyboard keys won't work, and the picture goes haywire sometimes, flashing itself, bak to old stuff, typing in the safari line, all this going on vey fast.   Any fixes out there?

    Sounds like it could be a hardware problem.
    Try a restart or reset to see if that helps. If not, contact Apple Support.
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • Arrow Keys Won't Work on Many Websites

    On many game sites, the arrow keys won't work at all, so I'm not able to play. The hardware is fine, they work fine in email and Word, just not on the game sites. Do I have a setting wrong? I've checked everything (I think....)
    Thanks!!!

    The arrow keys are working for me in the game on http://www.ezone.com/games/jazzy/gamecode.htm. The arrow keys work slugishly for me in the game I tried on www.freeonlinegames.com/play/3350.html. The third sight seems to require registration so I did not try it.
    Freeonline games was more responsive for me using Firefox, you might want to give this browser a try and see how it behaves.

  • HT1379 Some keys won't work?

    What causes some of my keys not to work?

    You'll need to provide some additional information .... what keys won't work, what is running on the system when that happens, does it only happen after an event, like waking from sleep or ? If you reboot or shut your system down and restart does that fix it for some period of time?

  • My backspace key won't work

    My backspace key won't work and I just changed the language from Norwegian to English. I don't know if it's a context, but please help me! I need to use InDesign. bav

    Strange, can you attach a USB KB to test if it's the OS or not?

  • My 8 key won't work when I press it to put in my password, what can I do?

    my 8 key won't work when I press it to put in my password, what can I do?

    Presumably you are connecting it from the *Dock Connector.* In this case, the controls on the car stereo should be controlling the iPod and the iPod's controls are disabled.
    If you are using the car's connection interface, consult the car manual to find out how to control the iPod. If you are using an adaptor between the iPod and car, ask the adaptors installer or manufacturer.
    Phil

  • I purchased a new keyboard and the volume keys won't work now.  How can I fix this?

    I recently purchased a keyboard, with the numbers to the side, and now the volume keys won't work on the keyboard.  Do I need to reset something? 
    Thanks in advance!

    If the keyboard you purchased is an Apple model MB110LL/B -
    Apple Keyboard with Numeric Keypad - English (USA) - Apple Store (U.S.)
    ...then -

  • Upgraded OS from Windows 2000 to XP, now my Registration Key won't work

    Any reason why my registration key won't work when I upgraded my OS from Windows 2000 to Windows XP? Oh, and I also upgraded the QuickTime application.

    QuickTime 6.5 registration will not work with QuickTime 7.
    You'll need to purchase a new "Pro" key or revert to QT 6.5 Pro.

  • "E" KEY won't work without "Shift KEy"

    ThE "E" kEy on my KEyboard won't work unlEss I hold down thE "Shift" kEy as wEll, hEncE thE Capital Es in this post. ThE samE thing happEns with anothEr kEyboard pluggEd into thE USB port. ThE kEyboard viEwEr shows this. I assumE it is softwarE rElatED, somEthing to do with kEyboard assignmEnts but I can't find thE answER. Any hElp grEatly apprEciatED. I am running OSX 10.5.8 with currEnt updatES. I can't tEll you whEn thE problEm startEd as I just got thE computEr running aftEr REpairing thE DC in card. I bought thE computEr not running.

    Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
    (49732)

  • Fn F7 keys won't work in BootCamp on MBP

    I'm trying to use a projector with my MBP to teach CAD in BootCamp. The problem is that I can't mirror my screen when using bootcamp, like I can in OS X. I can get an extension of my screen, but can't display the contents of my screen on the projector.
    Normally you would use the fn F7 keys to toggle through the display options, but in Windows XP the fn F7 won't work.
    Does anyone have any ideas? A remapping program for MBP? Please Help.
    Brett

    Have you tried the windows way (right click on desktop > properties > settings and uncheck Extend my Windows desktop... ?
    Hope this helps...

  • Convenience keys won't work...

    When I lock my BB Curve 9300, I can't unlock it. All 3 convenience keys (right, left and mute) won't work. PLEASE HELP!!! I have to take the battery out to get it to unlock

    lillbitt67 wrote :
    When I lock my BB Curve 9300, I can't unlock it. All 3 convenience keys (right, left and mute) won't work. PLEASE HELP!!! I have to take the battery out to get it to unlock
    Hello lillibitt67
                               To rule out any Software issue I prefer you should Reload your Device Software and see if that helps otherwise you need to contact your Service provider for repair.So please try it first.
    KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Arrow keys won't work

    another question. my arrow keys work when using word, email, etc.. but won't work during other tasks such as going up and down folders, etc ...

    Hi, are you still having problems with this?

  • Few keys won't work after coffee spill

    I realize this subject has been beaten to death because I have done searches here and Google multiple times but I can't seem to find a precise answer for my problem. Yesterday, around noon, my daughter spilled some coffee on the keys of my aluminum 13" Macbook. I wiped it off immediately and powered the laptop down. I read some tutorials on removing the keys so I decided to do that and wipe up some of the spilled coffee from under the keys. I put all the keys back and I turned my computer on this morning only to find that none of my keys worked, but the mouse pad still works fine. I plugged an external keyboard in and continued to log in. I opened Word and began typing and about 1/2 of my keys began to work. The "L" key opens up Spaces instead of typing the letter "L". So, a few questions:
    Is it possible I didn't clean the keys good enough and that is why some of them are not working?
    Is my Macbook, late 2008 aluminum 13" considered a unibody style?
    I'm having trouble finding information on my specific Mac body style. I'd like to search for some tutorials on how to get a better view point of the keyboard to see if I can clean it a little better. I am prepared with the fact that I may need to buy a new keyboard. Also, I live about 4.5 hours from the nearest Apple store so that is out of the question. Thank you in advance for any help.

    hi, calleasto
    sorry to hear about this mishappen. I recognize it, since it happened to me a few years ago, also my daughter pooring thee (not coffee - but the difference is marginal - ) into an external keyboard. I took it apart and cleaned and dried it very carefully, but never got it working again. This was an external keyboard.
    a similar failure occurred to other people with they laptop keyboards (and to me, without "using" any liquid). I presume - without knowing really the interiors of the laptop keyboards - that (1) they are read out in a kind of matrix (sensitive bars arranged in rows and (almost) columns corresponding to keys), which needs two layers of contact strips; and that (2) the layers are separated by plastic sheets.
    Your diagnostics seems to imply that
    1) there are still bad contacts (might be liquid where it shouldn't be);
    2) the contact point has shifted ;
    The latter could perhaps be due to liquid shifting the pressure away from the point where it should be applied.
    What i would do:
    Give the keyboard much time for drying - perhaps by removing the keys again. But there is always the chance that the temperature of the coffee, and the residues are causing troubles and might cause some keys not to function properly.
    I think (i am not sure !!) you have a "unibody": i think it is "unique " in the sense that it has no screws (except at the bottom) - and no Firewire outlet. I have never opened my MB, but the only way i see for opening it is from the bottom (there are 4 screws at mine) - but i do not know whether it is advisable to open it. I would check via Phone with Apple before doing anything myself.
    Hope this helps.
    Thomas

  • The Up Arrow Key Won't Work!

    Whenever I try to use the up arrow key on my MBP, it doesn't respond. For example, on any application I use, it won't work. But, for some reason, whenever I play Empire At War, it works perfectly.
    What should I do?

    To be honest there is a lengthy process involved. If you are able to call APPLE support. try that. If not let me know and I will continue.

Maybe you are looking for

  • Error message log in session method of ALV report,

    In ALV report please let me know: 1) In session method: where all error messages are stored,I know that error messages are stored in a log file, so please tell me where is it stored. 2)transaction method: How to handle error messages in transaction m

  • Retrieving report resultset information

    Hi. I have a form1 and a report1 on the same page. The report1 shows the results of a query based on the selections made within the form1. On my report1 I want to have one of the columns in the result set to link to a another report2. The problem is

  • Ipad 3 version hotspot

    Where do I find the option to make my ipad 3 a hot spot? I have a 64GB iPad3 with a verzion celluar plan. I do not see the setting in the settings menu at all.

  • Slow finder save as...

    When I save out of Mac Mail often there is a very long delay before the save as window pops up. Same happens in Photoshop. Any bright ideas how to speed things up?

  • Update backend table from WebDynpro?

    Hi, I need to create entries in the backend table HRUS_D2.  I found that the FM used for this table is RH_UPDATE_SUBST_LIST_SERVER. I want to write a Java WebDynpro application display all the fields on the webpage which represents above table and up