Start up problems, lenovo G480

When I turned on my computer it got the blue screen of death and then robooted and defaulted to Startup
Repair.
I dont,t have system recovery disc and image back up files.
The restore point was turn off and no restore point.
The Startup Repair utility runs and can't resolve the issue. 
I get the following error:
Problem signature:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unkown
Problem Signature 04: 21199505
Problem Signature 05 AutoFailover
Problem Signature 06: 10
Problem Signature 07: BadDriver
OS Virsion: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Hi,
You don't have any recovery media and backup, this is not recommended behavior.
Please try to start your computer into Safe Mode by pressing
F8 key to troubleshoot.
To boot into Safe mode, the detailed guide is below:
Start your computer in safe mode
http://windows.microsoft.com/en-in/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
If the issue gone in Safe mode, you can eliminate the default settings and basic device drivers as possible causes. If a recently installed program, device, or driver prevents Windows from running correctly, you can start your computer in safe mode and then
remove the program that's causing the problem.
If it persists, you could use Last Known Good Configuration
in the Advanced Startup Options screen to see if it could fixed.
In addition, if the system recovery tools installed on your hard disk, you could use
Repair Your Computer option to repair.
Otherwise, no method unless you get one recovery media from others to repair your installation.
Karen Hu
TechNet Community Support

Similar Messages

  • Lenovo G480 Problem: I cant Create a new Drive

    Hi everyone.. so my my laptop is a Lenovo G480 intel i3
    4GB ram
    My operating System when i bought this was Windows 7 Home Basic.
    So my problem is that my Local Disk C is 420 GB while my Local Disk D is only 25.4 GB
    So I want my disk D to have more space (atleast 150GB) so I could store all my Installers, Games, Music and Videos in there, but when i try to transfer the memory from C to D, it wont. I shrink 150GB from my Local Disk C and when i clicked on Local Disk D the option Extend Volume is not available. So i tried to create a new drive instead.. I right click the 150GB unallocated space and the only option available is Create Simple Drive (i think). then i agreed at all the options but in the end it would say Not Enough Space.
    I dont understand. So  I tried changing the Operating System to Win7 Ultimate but same problem.  Please Help Me I dont know what to do (and by the way it can also not be done when im installing Win7. The option Extend is also not present there or  Create new Drive)
    Solved!
    Go to Solution.

    you need not to go to diskmgmt.msc as you have already messed up enough with your HDD. now wipe out you system reserved, C and D partition (I mean all created partitions leaving the OEM reserved partition viz "LENOVO_PART") booting from windows 7 DVD. At one page there will be drive option when you see your all partitions. click that "Drive Option" and now delete one by one all partitions leaving "lenovo_part" one untouched.
    now create your required partitions of your size. system reserved partition of 100 MB will be automatically created when you create your first (C) drive.

  • Lenovo G480 LCD screen dark spot problem

    HI,
    my Lenovo G480 LCD screen have dark spot problem can I send it to sevice centre to warranty?

    Hi willson,
    Welcome and Thanks for posting in the Lenovo Community,
    Am sorry to hear about the issue that you’re facing,
    Kindly check the below contact numbers for the service support:
    Malaysia
    IDEA-branded and
      B, C, E, G, H, K, N, Q, V, Y Series Products
    1-800-22-0116
    9AM - 6PM
      Monday - Friday
      9AM - 3PM
      Saturday
    Thanks and Best Regards,
    Soha
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo g480 graphic card heat problem

    my lenovo g480 comes with a nvidia geforce gt 630m 2gb 
    when i run games like left 4 dead 2 and dragon nest i get an average temp of 85-95 degree celcius
    maximum reading of 96 degrees.....
    i fear that my laptop will be cooked man... 
    please help me solve this
    even when its idle its around 60 degrees.....

    Hi and welcome to the community
    I advice you to clean the fans and the heat sink fins very thouruoghly. I myself clean them every six months.
    Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
    If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

  • Lenovo Thinkpad T60 with start up problems

    I have a Lenovo Thinkpad T60 with start up problems.  In order to get the computer to start up, I have to unplug it, remove the battery, re-insert the battery and turn it on, once it starts the start up sequence, I can plug in the power cord.
    If I plug the cord in before I push the power button, all of the lights go out, and it does nothing. 
    I have tried several power supplies, and a new battery, even though the old battery seems to work.
    All of the updates are applied, including the latest bios update.
    The computer seems to work normally unless it goes into standby, then it just turns off.
    Any ideas what could be causing this?
    T60, 2623 KEU, Windows XP SP3

    Hello,
    Did you replace the primary battery which snaps into the back, or the internal CMOS/RTC battery inside the unit?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Web-Cam does not work on Lenovo G480, PLEAS HELP!!

    Hello,
    I have a Lenovo G480 (20165), and my built-in Web-Cam is not working.
    When I enable it by pressing Fn+Esc the little light by the Web-Cam turns on, then shuts off after a second.
    So I downloaded the Lenovo Easy Capture, and when I open the software, I get a message saying "Failed To Open Camera".
    And when I turn on my laptop, the little light comes on for a short moment, then the light shuts off.
    I don't know what to do, It's a brand-new laptop and I've never been able to get the Web-Cam to work, not even on Skype.
    I would REALLY appreciate the help. Thank you!

    Have you installed camera drivers from the us support site? Try reinstalling them
    Win 7
    http://download.lenovo.com/consumer/mobiles/0qca12ww.exe
    http://download.lenovo.com/consumer/mobiles/0lca12ww.exe
    Win 8
    http://download.lenovo.com/consumer/mobiles/0qca08w8.exe
    http://download.lenovo.com/consumer/mobiles/0lca11w8.exe
    Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
    If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

  • Lenovo G480 webcam not working

    hello, im having trouble with my notebook, after upgrading it to windows 8.1 64bit, i can't use my webcam, and there is no imaging device under the device manager, i tried to installing the driver Camera Driver (Bison, Liteon, Chicony) from support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g480-notebook, there are no driver for OS windows 8.1, so i tried with the OS windows 8 version, in the middle of installation, after extracting package, and hitting install button, nothing happen, i've waiting for couple of minute, there are no signs that this process is start, or done. and try to restart it, hope the drivers is installed, but still no change 

    Have you tried enabling your webcam through Pressing the FN key on the keyboard and then the Esc key?
    FN+Esc while you are looking at your camera... This will enable the camera so that it will work.

  • Lenovo G480 lcd darker on right side.

    Dear All, 
    Greetings
    Some days ago my laptop's screen got a bit darker on right side.
    Now its more dark & it looks like different. Its pixels also show different colour. On an external monitor gives a perfect picture. But LCD has problem.
    Please help..!!
    Lenovo G480 and graphic adapter is of Nvidia.
    Regards  

    hi hm_khawaja,
    Welcome to the Lenovo Forums.
    If you boot into the BIOS (F2) and you still see that one side of the LCD is darker than usual then your conclusion about the LCD being the problem is correct as the backlight on that corner is most likely malfunctioning.
    If the unit's still under warranty, I recommend that you contact lenovo and report the issue. Otherwise, you may need to replace the entire LED screen.
    See page 106 of the HMM for a list of compatible LCD panels
    - Link to picture
    Item:
    http://www.laptopscreen.com/English/model/IBM-Lenovo/FRU~18200156/
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • HELP!!! on Lenovo G480 Model Name: 20156

    Hi Good day!
    Newbie here.
    I just bought my new laptop Lenovo G480 with pre-installed operating system of Windows 7 starter.
    Now, I upgrade my windows 7 starter  to windows 7 home premium and not doing the clean install.
    What happen is i use the windows upgrade anytime, copy the product key that i saw in the web and paste it to the upgrade anytime. The product key that i copied failed. So what I did is, I restart it, and when it boot up the windows is already upgrading to windows 7 home premium. After the setup, I copied the activation key for the product key that I copied and  windows upgrade anytime accepted it. Now my windows 7 home premium says is it is activated and genuine.
    Take note that I disabled the automatic update, as I'm afraid that microsoft might detect that my windows is not genuine.
    Before i did the upgrade, i made a backup system with the use of onekey rescue system and save the backup to my built-in hard disk drive.
    Now that I'm in win7 home premium, if I press the onekey rescue system button, will I get back to my previous os which is win7 starter without activating it? because I also don't have activation key for it, as i bought the laptop with pre-installed os.
    Can you guys please advise me what to do?
    I am really scared right now, I know I'm stupid and I don't want to waste my money because of what I've done.
    Reply will be truly appreciated.
    Thanks.

    I'm sorry I used the one key recovery to backup my system and saved it to my built-in hard disk drive.

  • Actulización de BIOS Lenovo G480

    He intentado actualizar el Bios de mi Lenovo G480 , pero al momento de ejecutar me envía el siguiente error: ERROR 255 - TDK library initialization failed! El BIOS fue descargado de la paágina oficial de Lenovo. Mi sistema operativo es Windows 8, 64 bits.  No se que hacer porque el BIOS que trae de fábrica provoca probelmas de encendido. 

    Hola: Tengo un notebook lenovo G480  de 64 bits y actualice el sistema operativo de windows 8.1 a windows 10, el problema es que al tratar de reproducir audio los parlantes externos no lo hacen, pero si conecto los auriculares estos se oyen ; ¿Será un problema técnico? o ¿Hay alguna otra razón y solución?. Además se me ha desintalado el controlador Dolby Advancer Audio y el sonido por ende no es el mismo al que tenía anteriormente, existe ya una actualización de DOLBY para windows 10 de 64 bits ? Gracias  y saludos cordiales  

  • Increasing VRAM lenovo g480

    Hello everyone! I came here because I wanted to increase my dedicated video ram (VRAM) in my lenovo g480. Acording to what I have read, the laptom has I think only 32mb of dedicated RAM, and wanted to increase that value a bit more. I have already tried to see into my BIOS settings, but unlike other BIOS I have seen, there's no option for change the amount of VRAM avilable. So I wanted to know, is there ANY way I can change the VRAM, either by using comand prompts, programs, BIOS modification, etc? If not, I have to say that I'm very disappointed on the lack of control Lenovo gives to the user of their own computers. PS: I have 12 gb of ram, an intel i7 3612 QM with intel HD4000 integrated graphics card, and windows 8.1 single language. 

    Hi Henry,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that your G480 Laptop is displaying BSOD (Blue Screen Of Death) error while turning the computer ON, I suggest you to perform the Flee-Power and BIOS reset. Below are the steps to check and resolve the issue:
    Remove the battery and any other peripheral device connected to the computer.
    Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.
    If the issue persists even after performing Flee Power then resetting BIOS to its defaults should resolve the issue
    Now access the BIOS menu press F2 when the Lenovo logo appears on the screen while the computer is starting up.
    Then to reset the BIOS to its defaults click on “F9” Key and select YES.
    Now click on “F10” Key to save the changes that are done in BIOS, the computer should automatically restart. Please check if the issue persists.
    Hope this helps!!!
    Do post us back if the issue still persists.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Any Advice to Fix/Enchance Lenovo G480 Webcam Video Quality?

    Lenovo G480-5801, 2332
    Intel B960M, I can't find my Lenovo type on website, so I just assume everything is just the same like other G480 type.
    Just purchased recently, it cames with 2GB RAM only, at first very slow
    After upgrading to 8GB everything is great.
    But there still a problem with Webcam though, and because of that I had to purchase a webcam for video chat.
    for comparison
    Built-in WebCam
    Logitech C170
    Yes I know, I'm not expecting it's going to be good like C170 that, but at least I do expect the image viewable, and it's not, is that normal?
    also about Mic built-in, no one can hear what I'm saying because lot's of noise/echo, and I have to disable it and use Mic from C170.
    Thank you.

    hi senthil_naga,
    In addition to Catt's suggestion, have you tried adjusting the brightness/contrast setting of your camera under Skype?
    See this guide in reference:
    Adjusting Webcam Video Settings in Skype
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

    I started getting start-up problems with my hp pavilion dv6t-7000‏.  It happens intermittently. 
    The boot error is:
       Boot Device Not Found
       Please install an operating system on your hard disk.
       Hard Disk (3F0)
       F2 System Diagnostics
       For more information, please visit: www.hp.com/go/techcenter/startup
    Could a faulty BIOS update cause this problem?
    Anyone else who may have experienced a similar problem?
    I'd appreciate any help about this problem.  Thanks.

    Hi
    Please find the link given below might help you to fix your issue.
    Resolve Boot Device not Found Error Message
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Start up problems, including from installation disc.

    Hello everyone in the Apple ether, I need your help!
    I have a powerpc based iMac G5 at home that I set up for my mum to use once I bought my macbook. I finally managed to win her over with talks of how much easier it would be for her to manage her photos in iPhoto, and everything was going really well. I recently came home after my final year at uni and some travelling to find that the computer is taking a long time to start up. This can be in both the grey apple loading screen but also once it logs in it can take a long time to display anything over than the desktop background, and even once it displays other items any attempt to open anything just results in a spinning wheel icon. At the worst case it has taken about 20 minutes to get going.
    Once it has fully booted, the machine doesn't appear to be working any slower than normal. I tried using disk utility in mac OSX and verifying permissions etc and that didn't do anything. I then tried googling the problem and came across this article on the apple web site. http://support.apple.com/kb/TS1417
    Starting in Safe Mode did not resolve the issue so after backing everything up I tried starting from the installation disc. This is not something I have ever done before and as someone that never really delves beneath the surface of her machines I was a bit scared of doing it. But I put the disc in and restarted and held down C just after I heard the chime, and shortly after it all went wrong. The screen went grey and all I could see was the image you get when it crashes (you know, the power sign with text over it saying you need to restart) with lines of code all down the left of the screen. I took a photo of the screen on my camera so can give details of the code if you need them. The last line said
    Kernel version:
    Darwin Kernel Version 8.8.3: Wed Oct 18 22:00:38 PDT 2006; root:xnu-792.15.4.obj-4/RELEASE_PPC
    panic: We are hanging here...
    After a few minutes on this screen the fan started working overtime and after about 5 minutes of that I just turned it off using the power button on the back. The machine has since started up normally (ie slowly) but is working fine.
    So I was wondering if anyone had any ideas how to fix the slow start up problem without booting from my install disc, or indeed if anyone could suggest why I can't boot from my install disc? Thanks very much for your time and help.

    It appears you experienced a kernel panic which is hardware related. A few suggestions for you to try:
    Except for the keyboard & mouse, disconnect all devices from the computer & try the suggestions mentioned in the following:
    http://docs.info.apple.com/article.html?artnum=106805 Mac OS X: "Broken folder" icon, prohibitory sign, or *kernel panic* when computer starts
    User Tips: Kernel Panics
    ==============
    Boot up from your Tiger or Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose *"Disk Utility"* from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the *"repair disk"* button in the right hand section of the window.
    Once this process has been completed restart your computer and run *repair permissions* from Disk Utility.
    * If Disk Utility (from the install DVD or HD)is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
    =============
    How much HD space is left on the iMac?
    How much RAM is installed?
    ==============
    Which "model" & "generation" G5 iMac does your mother have?
    Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
    http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
    You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
    Thank you

  • I had an iphone 4 and when I downloaded the IOS7 started having problems. Gone the phone keypad, could not type more names of my contacts in the phone search. I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of yo

    I had an iphone 4 and when I downloaded the IOS7 started having problems. Gone the phone keypad, could not type more names of my contacts in the phone search. I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of your phone contacts it takes to open or write

    dedegodoy wrote:
    I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of your phone contacts it takes to open or write
    What does that mean? What is your technical support question?

Maybe you are looking for

  • How to pass a value to a variable at the time of scenario execution

    Hi All, I need to develop a ODI scenario, wiht below requriments. I have to move data from flat file to Target DB. flat file name is not consistent, we have to pass file name at the time of scenario excution. Could any of help me how to build this OD

  • Ipod 4th gen.Wont turn on.

    My ipod touch 4th generation took water damage from a small cup of water. As soon as the water had contact with the ipod i dried it out and turned the ipod off. Now it will not turn on. Iconnect it to the charger or pc and it will show the black scre

  • Differences between the "Adobe Acrobat Versions 7 and 9"

    Dear Adobe Support Team, I need to know the differences between the "Adobe Acrobat Versions 7 and 9". I have worked with Acrobat 7 and have used the same script after installing Acrobat 9 for Automation Testing with QTP for validating pdf. The object

  • How to save a FORM as DATABASE

    Hello everyone I am using forms 9i with Database 9i and 9iAS . I want to save a form as database . In previous version we had the option so save as file or database . We were able to set it under tools- preferences . But in forms 9i I don't find it a

  • Create AAC version not showing in Library

    I have converted many files to AAC but they are not showing up in my library.  Besides dragging and dropping ONE at a time from the file itself, how do I get them to show in the library?  iTunes 10.5.1