Start Up Problems with new Lion OS X
Every since I installed Lion on my two Macs, 5-6 programs open up at start up. Have to go in and shut each one of them down before I can do anything else!
Anyone else have this issue? How do I fix this?
Thanks!
Amctr wrote:
Thanks Barney,
I'll try what you suggested but the "Resume" is opening up programs I have had opened since I installed Lion.
That's what Resume does. It reopens the programs and files that were open when you shut down.
Similar Messages
-
Email Problems with New Lion Software
I have recently upgraded my computer to the new Lion Software. My email now longer works and is constantly in freefall sending and receiving emails. Since I downloaded the software this problem has happened on and off but now its a permanent problem. I know its the new software that affecting my emails as all my other devices, my iphone and ipad pick emails okay. As a small business owner this is a huge problem.
Hi!
After the new upgrade of software, my iPod Touch has not been able to retrieve any emails from the different a/cs I hv, Yahoo, Starhub, Singnet. All I see is the 1st few lines preview & when I click on that same email to open, its totally empty. Never had this problem b4 the upgrade. -
I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.
At first I thought it might be because I was using simultaneously my old iPhone 4S so it somehow realized the emails where being pushed to another device and the it marked as read, this has nothing to do since I have deleted the email account from the iPhone 4SContact the email provider for assistance with their service.
-
I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.
at least that the operator has confirmed to me that he called me. I also have problems with either the start of the mac with the power off. I can not understand if it crashes or is just very very slow.
Finally, I have a problem with the external hard disck. I often said to have been ejected incorrectly (not true) and I start to restore the startup recovery disk because disk utility is ineffective from the normal operating system .. is a shocking thing, but how you reduced. in four years it had never happened. seem to have windows or worse. Wake up.
I am an Italian, alas, and then I would like an answer to my language because my € are the same as German French or English.You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface -
Can you assist us in a Start-up problem with the Z10's.
I have read a lot of complains with the Z10 starting-up and then got stuck at 98% completion. No further response after that!
For any further information please check the "BlackBerry Support Forum" on this same site.
Please respond or tel me who i can contact in this regard?
Thank you
Kobus69
Subject Title and beginning of post edited to reflect new topic.Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Some serious problems with Mountain Lion
Hi everyone,
I upgraded my mid 2010 15" MBP to Mountain Lion 2 days ago, and I have some serious problems with my machine now.
- Wifi problem: like many members 's machines, mine has problem to connect to the wifi after sleep or restarting, I had to wait 10 to 15 minutes for it to connected to my home network. Anh I tried to remove all of my settings in System Preferences/Network and added new connection. And now it cant connect to wifi anymore. I'm writing this article while sitting on the floor with my Ethernet cable plugged in my MBP. I connected to internet through a DSL modem and a Airport Extreme as a bridge and Access Point. I also tried to set up all of my network device but my MBP can't connect to the wifi still.
- Keyboard problem with Pages: I was very happy with the new iCloud syncing for Pages documents but after 5 minutes, I met a big problem with Mountain Lion. Whenever I type in Pages with Vietnames Keyboard( Mac OS X built in or from another developer: http://www.trankynam.com/gotv/ ), Pages stops working immediately. I can still drag the Pages's window around but can't type or do any editing. After that I have to force quit pages. It is really stupid that I'm writing a book in Pages and now I have to stop my working till apple fixes this ridiculous bug. I tried German Keyboard as well and Pages worked flawlessly. Do you hate Vietnamese, Apple?
- Messages problem: Since upgrading to Mountain Lion I couln't send or receive any messages. It worked perfectly in Messages beta.
Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
Apple, please test your software more before release it. I feel like I have no computer at the moment because I can't work, can't surfing the web wirelessly and can't communicate with my friends.HI,
- Messages problem: Since upgrading to Mountain Lion I couldn't send or receive any messages. It worked perfectly in Messages beta.
Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
What Messages to what type of Buddies or Contacts ?
This
I found out that the problem with my wifi was my MBP received automatically a ridiculous IP such as 169.254.170.0 instead of 192.168.1.4 as it should be.
WIll be part of the Issue as will be DNS issues.
mDNSresponder crashed with Handsoff! v1.5.3. After upgrading Handsoff! to v2.0.2, it works again.
In this case mDNSresponder also being stopped will stop DNS working.
I would guess if you have resolved these that you can Chat to people again.
4:33 PM Friday; July 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
My garage band will not work properly with new lion upgrade..HELP
My garage band will not work properly with new lion upgrade..HELP
I have tried to open old session i have done in garage band and many of the effects and instruments I have used will not show up. The system seems to have a bug.If the graphical user interface looks broken, that is quite often a problem of corrupted user preferences - have you tried to remove the preferences file, as described in the FAQ
http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
Here is again the short version:
Quit GarageBand, if it is running.
Open your User Library in the Finder. It is hidden in MacOS X Lion, so use the Finder's "Go" menu:
Finder > GO hold down the "Options" key, until the library appears in the menu, select it.
In the window that opens, open the folder "Preferences" and remove the file:com.apple.garageband.plist and com.apple.garageband.plist.lockfile
Then try again to run GarageBand and download the loops.
The preferences file stores all you user settings that you set using the "Preferences" panel in GarageBand, also the layout of the GarageBand window and the location of your recent projects. You will have to enter these settings again after removing the file.
Regards
Léonie -
I Have a problem with newer catalyst version 4.7 and 4.8..sometimes the screen goes totally black,it's like the montitor goes into sleep mode or screensaver.
This can happen at startup or after while the only thing i can do is to restart the computer by turning it off(or reset).
With cat 4.6 and the drivers before everything works fine.
I tried fastwrites on/off(no good)
Disable Vpu recover(no good)
Raise agp voltage to 1.6V(no good)
I also tried asus own driver but the same thing happens.
However i came to think of if there is anything i should change in power managment in bios because the comp won't wake up from sleep mode when pushing on the keyboard or moving the mouse(this is with cat 4.6 wich works great otherwise)
I hope someone have an answer to my mysterious problemQuote
Originally posted by Ycore
This is my exact problem. Computer has been running ROCK solid for the last few months with 4.7 catalysts. I install the 4.8's, reboot, load up Doom 3, and the computer hard locks within seconds of 3D mode being activated. Reboot, run 3dmark2001, and again, hard lock within a few minutes into the demo (screen goes black into power savings). At this point I figure it's a problem with the 4.8's, so I reinstall the 4.7's, fire up Doom 3, and IT FREEZES AGAIN.
At this point, I'm loathing my decision to mess with my vid drivers at all, and wondering how come the vid card has started to lock up in 3d.. I start messing with all sorts of settings.. Finally, tuning the AGP speed from 8X to 4X totally resolved the freezes.
QUESTION: WHY ALL OF A SUDDEN DID 8X AGP STOP WORKING???
AMD 64 3200+
K8T-NEO
Antec 430W PSU
ATI RADEON 9600 PRO AGP
SB LIVE
1GB CORSAIR C2 DDR (2x512)
Lite-ON DVD/CD+RW
Windows XP SP2
I have never got my 8x AGP to work, its always hard locks when I use it...dunno why I don't really care. When I upgrade to a pure 8x AGP card i might if it still happens. Actually if it continues to happen there is a good chance I will get rid of this board and get the nforce probable. But at any rate, setting AGP to 4x has always fixed every video card problem I have had since putting this computer together. So try that I suspect it will fix your problem as well.
Also note that we have very similar setup's so try it and let us know if that works out for you. -
Start-up problem with hp pavilion dv6t-7000: "Boot Device Not Found. Hard Disk (3F0)" error
I started getting start-up problems with my hp pavilion dv6t-7000. It happens intermittently.
The boot error is:
Boot Device Not Found
Please install an operating system on your hard disk.
Hard Disk (3F0)
F2 System Diagnostics
For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Problem with new version 4.3.2 apps not working " after update to the new version "
Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards -
I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
I'm trying to learn how to correct wifi problems with new iPad. It is the wifi only, 64GB model. I want to be able to use it at work, where we have a great wifi network. I can usually connect to our network with no problem, but after an hour or so my iPad loses the network. When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network. My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi.
I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question. I can't think of any other methods that are available to an end user to correct the problem.
I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms.
Can anyone offer any advice here? This is quite frustrating.No problem! Have a read at this most interesting article which has special significance as regards your models!
http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
created by Texas Mac Man in Using iPad - View the full discussion
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom ;) -
List of Problems with new Web Mail
List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code. -
Hi everybody. I have recently started having problems with iCal (Version 2.05 (1069). Events that I thought I had deleted appear in Print Preview and Print Outs. Likewise Events that I have not deleted have disappeared from my calender (Month View) but appear in Print Preview and Print Outs. I see that there have been similar problems with Events disappearing especially in Month View. I wondered how print preview seemrd to be picking everything up deleted or not, and what the solution may be?. First time of Posting. I hope I haven't embarassed myself.
Hmmmm.
At the very least there must be a "com.apple.ical.plist"...iCal would not function without it.
Click on the Finder icon in the dock
Click on Go > Home
Double-click Library
Double-click Preferences
Look for a file called "com.apple.ical.plist" and remove it to the trash. -
Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....
I suggest you contact Adobe tech support or their Mac forums for assistance.
Maybe you are looking for
-
How can I change to a higher frame rate than 12 FPS?
Just got a good deal on a 15 in MACBOOK Pro running Yosemite with the latest Quicktime and iMovie. Is the best frame rate I can get out of this HD camera 12fps? I can't find anywhere to change it in QT or in IMovie. MacBook Pro with Retina display, O
-
How do I get all music from my iPod classic to itunes on my computer?
How do I get all music from my iPod classic to itunes on my computer? I was able to "authorize" the purchased music (40 songs) to download to laptop but I can't select my entire library (1500 songs) to download to laptop!
-
How to apply hyper link for a particular cell in the column?
Year 2001 2002 2003 2004 I wanna apply Hyper link for 2001 only! How to achieve this? Can we apply no. of hyper links for a column?
-
I I tried to sync all the songs in the library of the music folder, when I did my usual sync , I got a message saying Some of the items in the Itunes libery. Including "彩虹的微笑". Were not copied to the Iphone. "User's Iphone" because they could not be
-
(SOLVED)How do I make a system snapshot?
Hi, The latests udev scare has shown me two things: you can rely on the community to fix this (thanks Tobias!) and a good backup/snapshot is worth its wheight in gold. What manual do I read/study/understand to make a system snapshot before upgrading?