Start Up Problems with too full Mac Air

I cant restart my Mac Air after the batterie whent flat after i got message about Start Up Memory Too Full. What do i do now.

You may be able to boot in safe mode by holding down the shift key at the startup chime.
Empty the Trash if you haven't already done so.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.

Similar Messages

  • Start up problems with G5 I-Mac

    My I-mac G5 is refusing to start. It variously goes to a screen with a question mark, alternating to a folder icon, eventually gets to the grey apple screen and progress indicator, stays on this screen for approx 3 - 5 minutes before the cooling fan cuts in and then it shuts itself down. I've done a hardware test - all okay and have tried to re-install the operating software off the discs, but when I get to selecting the destination drive to load the OS, there is no destination to select and the continue button is blanked out. Any suggestions??

    Your Hard Drive is not necessarily dead.
    Have you tried starting up in safe mode, by holding down the S key on start up?
    Before you go to the extremes of replacing it try DiskWarrior [http://www.alsoft.com>, which comes as a boot up CD. In many cases I have found it gets things going again and/or at least helps you get everything off the drive. TechTools Pro [http://www.micromat.com/index.php?option=com_frontpage&Itemid=104] can also help especially with a thorough HardWare check but is not as effective at getting HDs back up and running. Do NOT ever use Norton's Utilities!
    Have you tried finding the drive, repairing it and mounting it from the Disk Utility on your installation DVD? When you start up in the DVD's installer you can switch to the copy of Disk Utility which is on the DVD.
    Have an external bootable Hard Drive (FireWire & some USBs) ready to backup everything from the drive, just in case you only get one shot at this.
    When/if you get access to your drive, use Disk Utility to select the Drive (not the "volume" which is on the drive). Down the bottom of the Disk Utility window then will be a report on the status of the drive, including the S.M.A.R.T. status which is supposed to give you early warning of any hardware problems.

  • I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop

    I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So, sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop, the result is a black screen appears with no responding to anything from pressing the keyboard to pressing the touchpad. It takes few minutes for the laptop to open again and then a message appears saying that there was a problem with the lock security.
    What is happening exactly?

    It sounds like your sleep timers are set to too low of a value.  Go to System Preferences -> Energy Saver and set both timers to longer times.  The computer sleep timer should be a longer time than the display sleep timer.

  • Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

    Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

    when I launch Photoshop CC, I get an error message
    and what exactly is the text of that error message?

  • Problems with current version of AIR. Won't load and also can't uninstall

    I have recently purchased a new Mac and loaded the most recent version of AIR but now when I try to run it I keep getting the following message
    This application requires a version of Adobe AIR which cannot be found.
    Please download the latest version of the runtime from
    http://www.adobe.com/go/getair,
    or contact the application author for an updated version.
    I am also getting this message when I try and run the uninstaller so I can I can try and re-install.
    Does anyone have any suggestions?
    Thanks.

    I had AIR 3 on my MacBook Pro before I updated it to Lion. I use AIR 3 to run McMillan Study guides Master your CDCs. when I updated my mac to lion and tried to run the application the application couldn't find AIR 3 on my mac. So I uninstalled it and tried to install it again. when I tried to install it the installer program doesn't open. please help me this program is crucial for my upgrade training. 
    From: lisachao <[email protected]>
    To: A1C PD <[email protected]>
    Sent: Monday, October 24, 2011 12:35 PM
    Subject: Problems with current version of AIR. Won't load and also can't uninstall
    Re: Problems with current version of AIR. Won't load and also can't uninstall created by lisachao in Installation Issues - View the full discussion
    Is this the error you are getting when you are installing AIR 3.0?  Or is this the error you are getting after you've already installed AIR 3.0 and attempting to run AIR applications?  If it's the latter, which applications are you trying to run?  Can you please send us your logs so that we can investigate further?  Thanks!
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3987820#3987820
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3987820#3987820. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Installation Issues by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problem with MacMail on MacBook Air - mail with 32MB attachment appearing in "recovered messages" folder every 12 seconds

    Problem with MacMail on MacBook Air
    3 days ago I failed to send a mail with a large (32MB) attachment - and it is no longer in my outbox, draft mails or sent file.
    BUT a copy of this same mail now appears every about 15 seconds in my "recovered messages" folder
    I noticed when I received a system error saying I had a disk almost full issue - there were over 580 copies of the mail with 32MB attachment in the "recovered messages file"
    I deleted them all, and deleted the Trash
    BUT the message still keeps re-appearing every 15 seconds or so.  So I keep deleting them.
    Since then I have not been able to receive mail (altho' I am able to send) and Mail is VERY slow
    I am running MAC OS X 10.6.8
    I am running Mail version 4.6 (1085)

    Also here's the log before it happened. As you can see there is no activity from 9:48 to 10:00 am when the sound occurred.
    23/02/2014 9:48:12.792 am ntpd[52]: FREQ state ignoring -0.145411 s
    23/02/2014 9:48:15.258 am WindowServer[96]: _CGXHWCaptureWindowList: No capable active display found.
    23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000280
    23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319378: AirPort_Brcm43xx::powerChange: System Sleep
    23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319390: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
    23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
    23/02/2014 10:00:04.000 am bootlog[0]: BOOT_TIME 1393167604 0
    23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
    ASL Module "com.apple.appstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".

  • Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

    I started getting start-up problems with my hp pavilion dv6t-7000‏.  It happens intermittently. 
    The boot error is:
       Boot Device Not Found
       Please install an operating system on your hard disk.
       Hard Disk (3F0)
       F2 System Diagnostics
       For more information, please visit: www.hp.com/go/techcenter/startup
    Could a faulty BIOS update cause this problem?
    Anyone else who may have experienced a similar problem?
    I'd appreciate any help about this problem.  Thanks.

    Hi
    Please find the link given below might help you to fix your issue.
    Resolve Boot Device not Found Error Message
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Problem with facetime for mac

    hello guy! I've got a problem with facetime for mac.My sister has a I-pod touch fourth generation with factime but i cna't phone her a message come on my mac.It say "xxx can't receive facetime's calls"!Can you help me??

    Thanks, Dah•veed.
    I did see mention of using Google Public DNS while I was searching the forums prior to posting, but to be honest didn't think it was a DNS-related problem.
    However, to rule it out I've set the prefered DNS servers on my router to Google's, but FaceTime still disconnects after 4-5 seconds when calling between me and my brother-in-law.  It doesn't matter who initiates the call.
    As a test, before I made the changes to my router, I logged into FaceTime as him on my MBP and tried calling myself on my iMac, and that was successful.
    The same test between the two iMacs when they were here was unsuccessful, so now I'm definitely thinking it's something on the '08 iMac.
    Now I just need to figure out what...

  • Problem with Twitter for Mac notifications

    Hello,
    I have a strange problem with Twitter for Mac. On both my home and office Macs. New posts appear in app window but there aren't any notifications even though notifications are set in preferences to show in both dock and menubar. Perhaps anyone noticed similar strange behaviour? I didn't find anything similar on Twitter forums.
    Thanks in advance.

    Solved by
    Dr.AvituvOct 20, 2014 11:09 PM
    go to Terminal and post this:
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/support/lsregister -kill -seed
    if it doesn't have that specific directory try this:
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -seed
    once the scanning is done (can be short or long, depends on how heavy your system is) RESTART the computer.
    when you're back, go to Apple>system preferences>extensions.... guess who's there.
    I hope it helped.
    The Doctor.
    iMac, OS X Yosemite (10.10)
    To restore Actions extensions for good and other stuff
    THANKS!

  • Problem with installation of Adobe Air 2.6

    Hi,
    I've got a problem with installation of Adobe Air 2.6 under Mageia 2 Linux. The installation stops with an error. Here's the install.log:
    [Adobe AIR Application Installer:8550][ERR] Application Installer end with exit code 7
    [setup:11894][INFO] Runtime Installer begin with version 2.6.0.19170 on Linux x86
    [setup:11894][INFO] Commandline is:
    [setup:11894][INFO] No installed runtime detected
    [setup:11894][INFO] Relaunching with elevation
    [setup:11894][INFO] Launching subprocess with commandline /tmp/air.HmUPbw/setup -ei
    [setup:11894][ERR] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="/tmp/air.HmUPbw/build/opt/Adobe AIR/Versions/1.0/Resources/rpmbuilder error : symbol not found: parseSpec, /usr/lib/librpmbuild.so: undefined symbol: parseSpec error : + umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ exit 0;+ umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' /tmp/air.HmUPbw/build '!=' / ']';+ rm -rf /tmp/air.HmUPbw/build;++ dirname /tmp/air.HmUPbw/build;+ mkdir -p /tmp/air.HmUPbw;+ mkdir /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ true;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe;błąd: Nie odnaleziono pliku: /tmp/air.
    HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml" errorID=1]
    [setup:11894][ERR] Runtime Installer end with exit code 7
    How can I solve this problem? Thanks in advance for help.

    I'm not certain that Mageia 2 Linux is supported.  This Release Notes page and this Install Help page don't mention Mageia, just
    Fedora Core 12, Ubuntu 9.10, OpenSUSE 11.2.
    Roy

  • Start-up problem with the Z10

    Can you assist us in a Start-up problem with the Z10's.
    I have read a lot of complains with the Z10 starting-up and then got stuck at 98% completion. No further response after that!
    For any further information please check the "BlackBerry Support Forum" on this same site.
    Please respond or tel me who i can contact in this regard?
    Thank you
    Kobus69
    Subject Title and beginning of post edited to reflect new topic.

    Hi
    Please find the link given below might help you to fix your issue.
    Resolve Boot Device not Found Error Message
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • I have problems with office for mac  screen resolution, specially with excel

    I have problems with office for mac  screen resolution, specially with excel ?

    For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
    We are talking about Office:Mac 2011, right?

  • Hi everyone. I have just started having problems with iCal.  Events that I thought I had deleted are appearing on Print Preview and on print outs. Likewise Events which I have not deleted have disappeared from my calenders, but appear in print preview.

    Hi everybody. I have recently started having problems with iCal (Version 2.05 (1069). Events that I thought I had deleted appear in Print Preview and Print Outs. Likewise Events that I have not deleted have disappeared from my calender (Month View) but appear in Print Preview and Print Outs. I see that there have been similar problems with Events disappearing especially in Month View. I wondered how print preview seemrd to be picking everything up deleted or not, and what the solution may be?. First time of Posting. I hope I haven't embarassed myself.

    Hmmmm.
    At the very least there must be a "com.apple.ical.plist"...iCal would not function without it.
    Click on the Finder icon in the dock
    Click on Go > Home
    Double-click Library
    Double-click Preferences
    Look for a file called "com.apple.ical.plist" and remove it to the trash.

  • I have a problem with my new ipad air 64g with cellular. When I off my ipad for a long period of time ( around 2 hours), my ipad air freeze. Nothing is showing on screen with any button except by pressing reboot (home   on/off button)

    I have a problem with my new ipad air 64g with cellular. When I off my ipad for a long period of time ( around 2 hours), my ipad air freeze. Nothing is showing on screen with any button except by pressing reboot (home   on/off button). Anyone out there can help. Thanks.

    I have a 64GB iPad Air WiFi+Cellular (Verizon), and I don't see the issues you are describing.  First I would suggest that you update your iPad to the newest iOS update.  If that doesn't help, then you may want to schedule an appointment at an Apple Genius Bar.  If you go this route, I suggest that you let the iPad sleep for long enough for the problem to arise before you go to your appointment.

  • I just heard a news report that there is a problem with malware in mac computers that came through a recent java update. Is this true? If so, what should be done about it?

    I just heard a news report that there is a problem with malware in mac computers that came through a recent java update. Is this true? If so, what should be done about it?

    As usual those "news" reports mangled the facts and got most of the story completely wrong. This particular attack did not arise through a Java update, it was distributed through a fraudulent Flash download popup window, or malicious websites that Safari is designed to block.
    If you run Java on your Mac you may be vulnerable to this malware. If you do not run Java there is no risk. If you routinely keep your Mac up to date with Software Update the risk is greatly reduced.
    Shut off the mass market junk that masquerades as "news" and read this to learn some real facts:
      https://discussions.apple.com/docs/DOC-3271

Maybe you are looking for

  • IPod Touch 1st generation doesn't sync notes any more

    I have a 1st gen iPod Touch and 2 iPhones (4 and 4S). I use the iPod mainly for the gym, so I write my routines on the notes app. Now that I have updated my Mac to Mountain Lion and notes are out of Mail app, they don't sync. Does anybody know if the

  • Install error on Siebel 8.1.1

    I have seen a couple of posts from people who have had the same error as we are geting when installing Siebel 8.1.1 on Windows 2008 with SQL Server 2008. However, there has never been a post as to how the problem is resolved. We have 4 Siebel Servers

  • Itunes can't sync contacts due to disconnect

    Has anyone had this happen? I try syncing all my contacts and I get this. Itunes could not synch this Ipod because it has been disconnected. I can't get it to pass this point. It is still connected. Any help is appreciated. I do have the most recent

  • Sharing the Internet with Macs and PCs

    Hi there. I have a brand new Airport Extreme router working fantastically with my iMac. My roommate is on a PC and has a d-link DWA 130 USB wireless network adapter. I have a broadband cable connection set up via DHCP. If the network is set up withou

  • Comand line argument for updating .air applications

    Hi all, Please help me regarding the issue while updating the .air application silently using command line argument -update -silent -location <%INSTALLDIR%> "Location of .air file". For the fresh installation I used the following cmd line arguments -