Start up programs and running programs folder??

Where can I go to disable start up programs and view any programs that are running in the background??

The checkbox only has to do with hiding and not hiding an app on startup--although results vary.
Deleting it, on the other hand, should have stopped it from loading.
Check in you user/Library/LaunchAgents or user/Library/StartupItems for anything Entourage or Microsoft. However, I don't know why they would put something in there if they are using the Login Items.

Similar Messages

  • HT5639 if i use boot camp to establish windows on my Macbook pro can i then install a windows program and run it without another software ie parallels?

    Can I use a windows program such as QuickBooks on my macbook pro 15inch with only using boot camp or do i need to have another program?

    Boot Camp is everything you need to run a Windows application.
    Boot Camp allows you to install Windows in a second volume, so you can start up there and run all your Windows apps without needing any Mac OS X app. It's true that OS X apps like Parallels or VMware Fusion allow you to use your Boot Camp partition in Mac OS X, but it looks like you don't want that

  • Debug and run programs in virtual machine

    hi everyone
    how are you
    i want to know if there is any way to debug and run programs on visual studio to a virtual machine with a specific operating system i`m using visual studio 2013 ultimate in 64 based windows 8.1 system
    thanks

    but can you explain to me how can i configure remote debugger to run and debug to a virtual machine
    You treat the VM as though its any other real machine on your network.
    See the article I linked.
    im using Vm workstation 11 and windows xp running on it
    It's been a while since I used VMWare WS and I have a vague
    recollection that it may have some special facility for debugging with
    VS - but I never used it.
    also i want to know if i can run and debug to another computer on the same network
    Yes, you can - if the OS is supported by the version of VS you're
    using.
    Dave

  • When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

    When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

    Did you install BC drivers on the Windows side?

  • Problem with permissions, running programs and installing programs.

    I've been having trouble installing and running programs. Whenever I try to install a new program I have to make sure to right-click and select "Run as Administrator", which is something that didn't happen before. And while running programs, sometimes
    they don't work well (i.e. dropbox alerts me that it cannot run because of permission issues; calibre needs to run with Administrator level, otherwise it won't open my ebooks; the list goes on).
    I tried using the elevated command prompt and typin secedit
    /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose to reset the permission settings, and it does not work (it tells me that some ignorable warnings occured).
    There's only one account in this machine and it has administrator level.
    Any thoughts?

    1. First of all, it is a bad habit to work with administrator account only. Use standard user account where programs allows for it.
    2. For third party programs contact respective support/forums. Some programs are not written in right way and may need admin account. I would avoid such programs.
    3. Elevated rights (Run as Administrator) is natural enhancement that comes with Windows version 6.x
    4. If you want to play risky role, disable UAC (not recommended). Step-by-step is here:
    http://www.petri.com/disable-uac-in-windows-7.htm#
    Regards
    Milos

  • My MAC Mini requires reentering password after an unspecified time and running programs are interrupted

    My MAC Mini at unspecified times switches to require reentering the password  and running programs are interrupted.
    I do not find a way in Preferences to correct this.  Software  OS X 10.9.5 (13F34)

    From the menu bar, select
               ▹ System Preferences... ▹ Security & Privacy
    If there's a closed padlock icon in the lower left corner of the preference pane, click it and enter your login password when prompted.
    Click the Advanced button and, in the sheet that opens, uncheck the box marked
              Log out after … minutes of inactivity

  • Driver programs and print programs

    please give the imp print programs and driver programs of these print  programs?

    Driver programs varies, you can use standard ones or customise it.
    For Example, Some Driver programs related to FI, start with RF*
    Goto SE38 ,RF* press F4 , read the description.
    Select documentation of desired driver program and you can see the corresponding form name to it and use of the program.
    Reward points if useful.
    Regards,
    SaiRam

  • How to interchange data between Java Program and C++ Program

    I constructed a java program using netbeans IDE that has ability to connect with a respective DLL; I want to connect and interchange data between my java program(.jar) and VSC++ program(.exe) through DLLs.JNI uses single Dll to invoke C/C++ function in native manner,In order to increase the efficiency I tried to connect and interchange primitive data types between Java program and C++ program using that DLL(JNI implemented).
    Unfortunately C++ program cannot obtain data values that has been changed by Java Program.For example - If I declare a global int variable in DLL,java program can catch that int variable and can update it but If I run my C++ program(exe) loading same DLL simultaneously it cannot receive the updated value of that int variable declared in the DLL.
    Therefore I need a solution to share/Interchange at least primitive data and their respective values between a JAVA and C++ Program using JNI (in spite of date transferring through Sockets).JAVA TO C/C++ & C/C++ to JAVA using DLLs.
    (TWO WAY COMMUNICATION)
    JAVA.jar  <=> <JNI> <=> DLL <=> [Connector Program C/C++] <=> C/C++ .exe
    PLEASE HELP ME!! THANK YOU

    What in the are you trying to say? What does "filled into the servlet mean?" Is the map somewhere outside the servlet? In a different process? Are you asking how to extract data from a map? Something else?
    Sorry, but your question makes no sense.

  • What is difference between report programming and dialog programming?

    hi,
    what is difference between report programming and dialog programming? plz provide some example code
    bye

    ABAP programming
    Basically reports are used to read database and represent the results in lists.
    Reports are collections of processing blocks that the system calls depending on events.
    We can use reports to evaluate data from database tables.
    Reports are stand alone programs and controlled by events.
    A report itself never creates events
    steps in report:
    Processing the selection screen
    Reading the database
    Evaluating the data and creating lists
    Outputting a list.
    1st u write simple logics, after that u can enhance the code as step by step.
    http://venus.imp.mx/hilario/Libros/TeachYrslfAbap4/index.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
    http://www.sapdev.co.uk/reporting/reportinghome.htm
    Dialog Programming
    Structure of a Dialog Program
    A dialog program consists of the following basic components:
    Screens (dynpros)
    Each dialog in an SAP system is controlled by dynpros. A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
    The screen layout fixed in the Screen Painter determines the positions of input/output fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
    ABAP/4 module pool
    Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
    All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
    Check this link for basics.
    http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
    Check this link for Dialog Programming/Table Control
    http://www.planetsap.com/Tips_and_Tricks.htm#dialog
    Check this SAP Help for Dialog Program doc.
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
    Check this SAP Help link for Subscreens.
    http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
    Check this link for subscreen demo program.
    http://abapcode.blogspot.com/2007/05/demo-program-to-create-subscreen-in.html
    Also check this link too.
    http://abapcode.blogspot.com/2007/06/dialog-programming-faq.html
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
    http://sap.mis.cmich.edu/sap-abap/abap09/sld004.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ccf35c111d1829f0000e829fbfe/frameset.htm
    http://abapprogramming.blogspot.com/

  • Difference between conversion program and Interface program

    Hi All,
    Can any body tell me what's the exact differenct between conversion program and Interface program?How will we will classify an object whether it is converion or Interface?
    Thanks&Regards
    Mahesh

    hi,
    conversion program is your migration- or mapping- program to convert data in the format of the SAP-Interface
    example:
    -(customer)conversion program for vendors ZFKMIGR01 creates a file in the format of interface RFBIKR00
    with the foll. structures
    BGR00
    BLFA1
    BLFB1
    BLFBK
    hope that helps
    Andreas

  • Difference between DIALOGUE programming and SCREEN programming

    Hi,
      Please tell me the difference between dialogue programming and screen programming
    jomon

    hi
    -          A transaction is dialog program that change data objects in a consistant way.
    A dialog program must fulfil the following requirements
    -          A user friendly user interface.
    -          Format and consistancey checks for the data entered by the user.
    -          Easy correction of input errors.
    -          Access to data by storing it in the data bases.
    screen progarmming means.dialogue programming contains.
    -          Screens (Dynpros)
    -          Each dialog in an SAP system is controlled by dynpros.A dynpros consists of a screen
    And its flow logic and controls exactly one dialog step.
    -          ABAP/4 module Pool.
         Each dynpro refers to exactly one ABAP/4 dialog program .Such a dialog program is also       called a module pool ,since it consists of interactive modules.
    regads
    praveen

  • Unable to load and run program in DDR from SDK

    Hello all,
    I'm starting to work with Zynq and I'm quite a noob in this field.
    I generated a system for a ZC702 board in which the connections to the DDR memory and the GPIO are correct.
    When I try to run a "Hello world" example that writes such words via serial, I'm facing the problem that I can just run it from the internal ram on the Zynq, not from the DDR. I will try to explain this with more detail.
    When I set the on-chip memory (initial address is 0x00000000) on the linker script and I run the program, the XMD console shows this:
    XMD% Processor started. Type "stop" to stop processor
    User Interrupt, Processor Stopped at 0x00101104
    Processor Reset .... DONE
    Downloading Program -- D:/50_EXPs/080715/Zynq_702_projects/zynq_book/zynq_book.sdk/hello_world_gpio/Debug/hello_world_gpio.elf
    section, .text: 0x00000000-0x0000191b
    section, .init: 0x0000191c-0x00001933
    section, .fini: 0x00001934-0x0000194b
    section, .rodata&colon; 0x0000194c-0x00001963
    section, .data&colon; 0x00001968-0x00001ddb
    section, .eh_frame: 0x00001ddc-0x00001ddf
    section, .mmu_tbl: 0x00004000-0x00007fff
    section, .init_array: 0x00008000-0x00008007
    section, .fini_array: 0x00008008-0x0000800b
    section, .bss: 0x0000800c-0x0000802f
    section, .heap: 0x00008030-0x0000842f
    section, .stack: 0x00008430-0x0000a02f
    Download Progress.10.20.30.40.50.60.70.80.90.Done
    Setting PC with Program Start Address 0x00000000
    As you can see, al the addresses are correct. In this moment, the processor executes the program and everything is fine.
    Then, if I select the DDR memory (initial address: 0x00100000) on the linker script generation, the console shows:
    XMD% Processor started. Type "stop" to stop processor
    Software Breakpoint 0 Hit, Processor Stopped at 0x000015bc
    Processor Reset .... DONE
    Downloading Program -- D:/50_EXPs/080715/Zynq_702_projects/zynq_book/zynq_book.sdk/hello_world_gpio/Debug/hello_world_gpio.elf
    section, .text: 0x00100000-0x0010191b
    section, .init: 0x0010191c-0x00101933
    section, .fini: 0x00101934-0x0010194b
    section, .rodata&colon; 0x0010194c-0x00101963
    section, .data&colon; 0x00101968-0x00101ddb
    section, .eh_frame: 0x00101ddc-0x00101ddf
    section, .mmu_tbl: 0x00104000-0x00107fff
    section, .init_array: 0x00108000-0x00108007
    section, .fini_array: 0x00108008-0x0010800b
    section, .bss: 0x0010800c-0x0010802f
    section, .heap: 0x00108030-0x0010842f
    section, .stack: 0x00108430-0x0010a02f
    Download Progress.10.20.30.40.50.60.70.80.90.Done
    Setting PC with Program Start Address 0x00100000
     But the program is not run and the processor is like "blocked".
    There is just one scenario in which this second configuration works, and it's when the on-chip memories were previously loaded with the first configuration. This could indicate that the program counter is not pointing to the DDR, but to the on-chip memory. Then, when I select the DDR, if there is nothing on the memories of the chip, it does not execute anything.
    Does anyone have any idea of what's exactly happening and how to fix it?
    Thanks in advance!
    Ignacio.

    Hello Ignacio,
    Are you able to step through at all with the debugger to see if it gets stuck somewhere in particular?
    As a test of DDR setup itself, what happens if you link to OCM but do some pointer access directly to DDR (maybe write 0xdeadbeef to 0x10000000, readback 0x10000000, then print it)? Does it work okay?

  • Can I hook up my G4 to my G5 and run programs off it?

    I got the new G5 and I have the Digi001, but the sound card wont fit into the G5 so is there a way I can connect my G4 to my G5 and run Pro Tools and use the Digi001 while it's attached to the G4? Right now I have the two computers connected through the ethernet port and i can access files on the G4 but when I try to open a Pro Tools file it says there is an error.

    The main thing is I can't run Pro Tools and the Digi001 interface on my G5 cause it wont take the sound card. I only have one monitor and no space to hook up to computers with two monitors, keyboards etc. so i just want to hook up the computers to each other and run the program and interface from the G4 on the G5. i'm not trying to get a performance boost i just want to use the $800 Digi001 program again.
    You can't use the G4 hardware on the G5 at all.
    (X-Grid optimized software like VisualHub sends a large "task" to the other computers processors to do and then it comes back to the master machine)
    All you can do is remote control the G4 from the G5 using software like Apple Remote Desktop or a similar product like VNC. The other machine will be in a "window" on the first. Use a Ethernet network for this and a Firewire network to transfer files in a public folder if ARD won't let you copy/paste/transfer files. (I think the new version does)
    You can share the monitor, kb and mouse between the G5 and G4, one machine at a time using a physical KVM switch. Then share a network connection (Ethernet/firewire) and a public folder to transfer files between the two machines. This can grow tiresome if your switching between the G4 and G5 constantly.
    I think remote control would be the best choice and ARD the best software for it's ease of use, security and integration with Mac OS X. If the G4/G5 won't boot without a monitor, kb or mouse then you'll need to add a KVM switch for those times when you need to boot the machines. Else your going to wear out your ports/connectors.

  • After downloading and running program to install keeps saying file is corrupt. I have used this on computer before and had crash and am trying to reinstall. Have 2.? gh dual core processor with 4megs ram and a 320 gb hard drive using windows 7 64bit.

    After downloading and telling program to run it will not open the firefox install utility keeps saying file is corrupt. I had a computer crash and having to reinstall all of my programs. I have a 2.? Gh dual core processor running windows 7 64bit, which I had before, with 4 megs ram and a 320 gb hard drive so I know I have the system requirements.
    == This happened ==
    Every time Firefox opened
    == today 5/24/10 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    This can be caused by anti-virus software/ real time scanners. Please try to disable your anti-virus software real time scanner and try again. Do not forget to enable it after the download is complete!'
    See http://kb.mozillazine.org/Unable_to_save_or_download_files (Disable virus scanning in Firefox preferences - Windows)

  • Opening file to automatica​lly open and run program with input file

    My program has the ability to save and open a text file with a custom extension.  How do I make the system in which the program is being installed to recognize this file to open the program, AND how to I gather the input file in my program and load it.
    Thanks
    Solved!
    Go to Solution.

    Ok I have found on a different thread how to setup/register the file path association in the classes root.  What I don't understand is how my program will know what the input file is.  For example, the reg setting is C:/.../MyProgram.exe %1
    When my program loads, is the %1 in the argc/argv part of the main thread? And if so, how do I debug/test this?
    Thanks

Maybe you are looking for