Start up screen with multiple Apples then "You must restart" message
MDD 1Ghz 10.5.8
Things started running slowly. Got a grayish screen with a black box saying that I need to restart (in a few different languages!). Restarted to a screen with the apple kind of split into pieces in 3 different locations on the screen, with 3 different spinners under each apple. After a while, the screen of grayness returns, saying I need to restart. Rinse and repeat. Same old same old.
Disk utility tells me the start up drive is unrepairable. Luckily, Disk Warrior builds a new directory, I save the info on the drive.
New HD installed. Installed new 10.5 from DVD. OK for a couple days. Freezes, restart - now it will only start up to a multi colored, almost lava lamp looking screen with a distorted image of the box you get when you restart and it asks if you want to report or ignore (buttons are inactive).
Haven't seen this one in the past posts, so I thought I'd put it out there for suggestions. Thanks.
the apple kind of split into pieces in 3 different locations on the screen, with 3 different spinners under each apple.
You lost horizontal sync or changed resolution. The screen was not locked in place so it re-drew that stuff so that it wrapped around and showed up in three different places. Not much to learn there.
Disk utility tells me the start up drive is unrepairable. Luckily, Disk Warrior builds a new directory, I save the info on the drive.
That's good for the fixing the Directory, but does not rule on whether the data in files is any good or not.
New HD installed. Installed new 10.5 from DVD. OK for a couple days.
I guess the data on the Hard Drive was NOT OK.
Freezes, restart - now it will only start up to a multi colored, almost lava lamp looking screen
That Setup Assistant screen should only appear when a file on the Hard drive called .AppleSetupDone has been deleted or is otherwise not accessible.
with a distorted image of the box you get when you restart and it asks if you want to report or ignore (buttons are inactive).
Crashing again so soon after a new Drive and System re-install is not good news. Difficult problems like this are often memory-related.
Do you have Apple Hardware Test?
Do you have any other memory test?
Have you re-seated the memories? This can remove corrosion.
Similar Messages
-
You * pop into my screen and say "Update to the latest, Firefox 4.0!!"
I do, and my old version is wiped out.
Then you show a message, "You can't use Firefox 4 with this version of Mac OS X"
Are you certified idiots!!
Why don't you check the version of Mac OS X before spamming my screen with your stupid exuberance, as I say, *!!
What do I do m]now that I lost all me passwords, etc., etc.??
''Edited for language - TonyE''You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
-
Web dynpro screen with multiple rows with columns that can be edited
Web dynpro screen with multiple rows with columns that can be edited individually:
Hi
I am busy creating a screen in web dynpro for ABAP which we would like to make available via Portal ESS (Portal 7).
I need to add 'n type of table (or almost something like Excel) or something in which someone can type a few paycode numbers (there should be lets say 10 blank rows in which info can be typed in and if I click on a button or so, more rows must be added if necessary. Then in the other colums stuff like amounts must be entered which one should also be able to edit then and there.
Can anyone assist in what I can use for this? There does not seem to be some existing element that I can use.
Help will be appreciated.
Regards
DebbieHi Debbie,
Whiel Creating table you need to be care full that use chose INPUT FIELD as the CELL EDITOR. Just guessing that if ur table is not editable u might have choosen TextView as default cell editor type.
check link for details on TABLE UI
[http://help.sap.com/saphelp_erp2005/helpdata/EN/b5/ac884118aa1709e10000000a155106/frameset.htm]
easy way is to first add UI ELEMENT TABLE to your VIEW, then right click over it & select create binding from context. After you have a pop up where you can select what columns you want what should be its cell editor etc.
Greetings
Prashant -
I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?
Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
IMac stuck at white start up screen with revolving gray wheel. What to do?
My iMac is stuck at white start up screen. I have been having problems
With iMac since installing snow leopard. The unplug/replug option
Doesn't help. Any suggestions?Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
My phone keeps displaying a white screen with the apple, then occasionally flicks to a blue screen, but won't turn on! HELP!! I have had it on charge all day and have tried plugging it in to my computer to sync.
Restore your software using iTunes.
Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings.
You should be able to restore your backup file after this procedure. If the problem comes back, you either have corruption in your backup file, or a serious hardware problem that should be looked at by a tech at the Genius Bar (make an appointment first). -
My 2007 MacBook Pro keeps receiving "you must restart you computer" screen upon start up
It all started when i was watching videos online and the screen froze. It did this a couple more times and in between these freezes the computer would occasionally freeze during start up while the gray wheel was spinning.
I was running lion. i decided to reinstall snow leopard (dont ask why) and upon doing so ran into a few troubles such as the compter saying my log in password was incorrect. after sorting all this the computer was fine for a day or so til it froze again, this time while watching a video from a usb flash drive.
from that moment on, i have not been able to get past the "you must restart your computer" screen. I have tried everything i have found in this forum that relates to my problem to no avail.
i have booted in safe mode, booted in terminal mode and checked the hd which is said to be ok, i have resest the ram, and i have tried to boot from install disk (both dvd and usb flash drive)
after i check the hd in terminal, i typed "exit" to reboot and received this message:
cannot get audit control port
Warning: audit space low <5% free
systemShutdown false
along with others
Please help. this computer is my life line and im way too broke to pay for repairs or god forbid a new oneCorrect. I mean wipe and install OS X clean. You should be able to install from USB drive or DVD. Restart your MBP and hold 'C' during starup.
http://support.apple.com/kb/ht1533
You can use the following startup key combinations with Intel-based Macs.
Keystroke
Description
Press C during startup
Start up from a bootable CD, DVD, or USB thumb drive (such as OS X install media).
Press D during startup
Start up in Apple Hardware Test (AHT).
Press Option-Command-P-R until you hear startup sound a second time.
Reset NVRAM
Press Option during startup
Start up in Startup Manager, where you can select an OS X volume to start from. Note: Press N to make the the first bootable Network volume appear as well.
Press Eject, F12, or hold the mouse or trackpad button
Ejects any removable media, such as an optical disc.
Press N during startup
Attempt to start up from a compatible network server (NetBoot).
Press T during startup
Start up in Target Disk Mode.
Press Shift during startup
Start up in Safe Boot mode and temporarily disable login items.
Press Command-V during startup
Start up in Verbose mode.
Press Command-S during startup
Start up in Single-User mode.
Press Option-N during startup
Start from a NetBoot server using the default boot image.
Press Command-R during startup
Start from Lion Recovery1 -
hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on. I Can`t press any button.My Mouse still works. Battery is charged. Alt-cmd-escape doesn`t work It even after a forced shutting off, the problem is the same. what should i do? Thank you for your help.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. The battery is distinct from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
I cannot get my MacBook Air to move from the gray start up screen with the Apple logo and spinning gear. Please help
I cannot get my MacBook Air to move from the gray start up screen with the Apple logo and spinning gear. Please help
-
Got Black "You must Restart" screen, won't boot after. only restart screen!
I was browsing craigslist when i got the slow creeping down "You must restart blah blah blah screen..."
After obliging the machine's wish and restarting, it started to boot as normal. After an unusually long boot cycle, i got the same Restart screen. I removed the battery and reset power management because of a post that I found with a similar problem. After that, it goes through the boot system and then just shuts down.
It just continually does the same thing. I believe i left my install discs at work, so am working without them.
I logged in to single user mode and ran fsck -fy , and found it to come back with this result:
** /dev/rdisk0s2
** Root file system
** Checking Journaled HFS Plus volume.
** Checking Extents Overflow file.
** Checking Catalog file.
Invalid sibling link
(4,36954)
** Volume check failed.
/dev/rdisk0s2 (hfs) EDITED WITH SIGNAL 8
:/ root#
anyone know what the **** is going on??
I can't run diskutil in single user and verbose shuts down when trying to boot.Not bickering at all. Are all discussions "bickering"?
Topher, let me get this straight. How does one determine something is wrong? DU? DW? Other Utilities? What if, after an A&I, these Utilities show nothing wrong? Still recommend an Erase and Install?
This is like the "permissions" debates of yesteryear. My analogy was and is the same. I keep an elephant stone in my house. It wards off elephants. Not one elephant since I bought that stone.
A lot of people around here seem to have this type of thinking as regards someone else's data, time, and effort. It's not that complicated. -
Need help with MacBook. "You must restart your computer..."
So I just got a new MBP 13" back in April. Then a few weeks ago, I started getting these "You must restart" crashes out of nowhere. They weren't really specific to any task I was doing, but I noticed it happened most either while browsing the internet, or directly when opening the lid after it slept over night. It was just a bunch of random Kernal Panics that didn't really point to one specific thing. I suspected Google Chrome, but after an uninstall (deleting complete Chrome folder) and reinstall, still happened. Then just removed Chrome altogether and went to Safari, still happened.
Went to the genius bar and they did a few things that didn't work and said that they wanted to do a fresh install next. I hadn't backed up my system, so I bought an external, picked up my MBP, and took it home and did it my self. I backed up, then did a full reformat of the hard drive and did a fresh install of Lion. Restored my stuff from my backup. All was well for almost 2 days. Then bam, it happens again.
So I thought maybe I may have restored whatever software problem was there before I reformatted? But then I decided to test the RAM I put in it. About a week after I bought the MBP, I upgraded to 8GB. Got it from Newegg. Here is the specific RAM I got: http://www.newegg.com/Product/Produc...82E16820233215. Did a memtest over night, passed! But was still getting the problem. So I took the RAM out and put the factory RAM back in, and the problem hasn't happened since. And it's been about 5 days. Before, it was happening everyday, sometimes up to 3 times a day.
So I guess it's safe to assume that the RAM was the issue? Even though it passed the memtest? Only thing is, how do I go about getting them to warranty it? What do I tell them? Do you guys think that was even the problem or do you think it will happen again?
I can't get the apple hardware test to work. First, my computer shipped with no DVD's, so it has to use the internet. When it tells me to select my wireless network, my network isn't even showing up on the list. I tried typing it in manually and that didn't work either. Tried rebooting my router. Didn't work. So I tried using MyWi from my iPhone and that showed up immediately. But after it connected, it did nothing. It just displayed the grey spinning globe. Then gave me an error "apple.com/support -1005D" which gives me absolutely nothing when I search it.
The weird part is that when I'm using the computer normally, it connects to my network immediately upon booting. Why is the internet retore function not able to see my network?
I remember when I was trying to do the fresh install, my network wasn't showing up immediately either. It took about a minute to show up, while all my neighbors' networks were showing immediately. It also takes a long time for my Mac to see my Windows PC's on the network after it boots or wakes from sleep.
Here are some of the Kernel Panic reports:
"Interval Since Last Panic Report: 124573 sec
Panics Since Last Report: 4
Anonymous UUID: 170F68EE-C873-41B6-BBCF-EFEA6EF64179
Fri Aug 31 14:50:18 2012
panic(cpu 3 caller 0xffffff80002c473a): Kernel trap at 0xffffff8000292dc0, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff8408084a90, CR3: 0x0000000069057043, CR4: 0x00000000000606e0
RAX: 0xffffff8007fbeb68, RBX: 0xffffff800804b4d8, RCX: 0xffffff8408084a90, RDX: 0xffffff80008bc820
RSP: 0xffffff80f02c3cf0, RBP: 0xffffff80f02c3d10, RSI: 0x0000000000000001, RDI: 0xffffff800804b4d8
R8: 0x0000000000000001, R9: 0xffffff8013513aa8, R10: 0x0000000000000000, R11: 0xffffff80002da800
R12: 0xffffff8007f20558, R13: 0x0000000000000000, R14: 0xffffff800804b4d8, R15: 0xffffff80008bc740
RFL: 0x0000000000010202, RIP: 0xffffff8000292dc0, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0xffffff8408084a90, Error code: 0x0000000000000002, Faulting CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff80f02c39a0 : 0xffffff8000220792
0xffffff80f02c3a20 : 0xffffff80002c473a
0xffffff80f02c3bd0 : 0xffffff80002da0cd
0xffffff80f02c3bf0 : 0xffffff8000292dc0
0xffffff80f02c3d10 : 0xffffff8000294e69
0xffffff80f02c3d40 : 0xffffff80002825c1
0xffffff80f02c3dc0 : 0xffffff800026d220
0xffffff80f02c3f40 : 0xffffff80002c3fbb
0xffffff80f02c3fb0 : 0xffffff80002d9ff1
BSD process name corresponding to current thread: Google Chrome
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 200157839921
last loaded kext at 153113231450: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f80844000, size 241664)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.8
com.waves.driver.soundgrid 2.0.0
com.Cycling74.driver.Soundflower 1.6.2
com.digidesign.iokit.DigiDal 10.1.3f53
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.0f3
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleMikeyDriver 2.2.0f3
com.apple.driver.AppleHDA 2.2.0f3
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.42
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.5f11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d0
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleLPC 1.5.8
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.5f11
com.apple.driver.AppleUSBTCKeyEventDriver 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.3
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 530.4.20
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleSDXC 1.2.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleUSBUHCI 4.4.5
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.8
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 193.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.driver.AppleIntelCPUPowerManagement 193.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.0f3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleHDAController 2.2.0f3
com.apple.iokit.IOHDAFamily 2.2.0f3
com.apple.iokit.IOAudioFamily 1.8.6fc17
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleSMC 3.1.3d8
com.apple.driver.IOPlatformPluginLegacy 5.0.0d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.IOPlatformPluginFamily 5.1.0d17
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.2
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleThunderboltDPInAdapter 1.8.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.5f11
com.apple.iokit.IOBluetoothFamily 4.0.5f11
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.0
com.apple.driver.AppleThunderboltNHI 1.5.5
com.apple.iokit.IOThunderboltFamily 2.0.0
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.6
com.apple.iokit.IOStorageFamily 1.7.1
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Unable to gather system configuration information.Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 1.68f98
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.198.4.20)
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7"
Interval Since Last Panic Report: 24737 sec
Panics Since Last Report: 1
Anonymous UUID: 170F68EE-C873-41B6-BBCF-EFEA6EF64179
Sun Sep 2 11:02:04 2012
panic(cpu 0 caller 0xffffff80002c473a): Kernel trap at 0xffffff8000291966, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff8408069d0c, CR3: 0x0000000000100000, CR4: 0x00000000000606e0
RAX: 0x0000000074800000, RBX: 0x0000000000000029, RCX: 0x00000000000042ed, RDX: 0x0000000074000000
RSP: 0xffffff80ef5e3840, RBP: 0xffffff80ef5e38f0, RSI: 0x0000000000000001, RDI: 0xffffff80d1c2b5d4
R8: 0x0000000000000008, R9: 0xffffff80ef5e37f0, R10: 0xffffff7f81aa1130, R11: 0x000000012b0f2900
R12: 0xffffff8408069cd0, R13: 0xffffff8000696de0, R14: 0xffffff80008bcb40, R15: 0x000000000017dcb5
RFL: 0x0000000000010003, RIP: 0xffffff8000291966, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0xffffff8408069d0c, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80ef5e34f0 : 0xffffff8000220792
0xffffff80ef5e3570 : 0xffffff80002c473a
0xffffff80ef5e3720 : 0xffffff80002da0cd
0xffffff80ef5e3740 : 0xffffff8000291966
0xffffff80ef5e38f0 : 0xffffff8000617794
0xffffff80ef5e3c40 : 0xffffff80002cc768
0xffffff80ef5e3c60 : 0xffffff80002bb119
0xffffff80ef5e3cf0 : 0xffffff80002cc589
0xffffff80ef5e3d50 : 0xffffff7f81acbbad
0xffffff80ef5e3d80 : 0xffffff7f81acf220
0xffffff80ef5e3da0 : 0xffffff800064e800
0xffffff80ef5e3de0 : 0xffffff80006678a9
0xffffff80ef5e3e20 : 0xffffff800062e5e6
0xffffff80ef5e3e70 : 0xffffff8000635a0d
0xffffff80ef5e3eb0 : 0xffffff800062b664
0xffffff80ef5e3ef0 : 0xffffff800062b80b
0xffffff80ef5e3f30 : 0xffffff800063b330
0xffffff80ef5e3f70 : 0xffffff800063b1d4
0xffffff80ef5e3fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.driver.AppleACPIPlatform(1.5)[BA70CBE6-1F7C-3374-A30F-F6BF00DAB521]@0 xffffff7f81ac2000->0xffffff7f81b19fff
dependency: com.apple.iokit.IOACPIFamily(1.4)[A87503EC-9C34-3613-9A86-7296B23BC344]@0xfffff f7f80822000
dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f808d5000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 24816756331457
last loaded kext at 135997606362: com.apple.driver.AppleProfileTimestampAction 85.2 (addr 0xffffff7f80b26000, size 16384)
last unloaded kext at 274799488699: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f80ae7000, size 65536)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.8
com.waves.driver.soundgrid 2.0.0
com.Cycling74.driver.Soundflower 1.6.2
com.digidesign.iokit.DigiDal 10.1.3f53
com.apple.driver.AppleIntelProfile 85.2
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleMikeyDriver 2.2.0f3
com.apple.driver.AppleHDA 2.2.0f3
com.apple.driver.AGPM 100.12.42
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.driver.AppleSMCPDRC 5.0.0d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.iokit.IOBluetoothSerialManager 4.0.5f11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d0
com.apple.driver.AppleLPC 1.5.8
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.5f11
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleIRController 312
com.apple.iokit.SCSITaskUserClient 3.2.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.3
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AppleSDXC 1.2.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AirPort.Brcm4331 530.4.20
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.8
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 193.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.driver.AppleIntelCPUPowerManagement 193.0.0
com.apple.driver.AppleProfileTimestampAction 85.2
com.apple.driver.AppleProfileThreadInfoAction 85.2
com.apple.driver.AppleProfileRegisterStateAction 85.2
com.apple.driver.AppleProfileReadCounterAction 85.2
com.apple.driver.AppleProfileKEventAction 85.2
com.apple.driver.AppleProfileCallstackAction 85.2
com.apple.iokit.AppleProfileFamily 85.2
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.0f3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleHDAController 2.2.0f3
com.apple.iokit.IOHDAFamily 2.2.0f3
com.apple.iokit.IOAudioFamily 1.8.6fc17
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleSMC 3.1.3d8
com.apple.driver.IOPlatformPluginLegacy 5.0.0d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.IOPlatformPluginFamily 5.1.0d17
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleUSBBluetoothHCIController 4.0.5f11
com.apple.iokit.IOBluetoothFamily 4.0.5f11
com.apple.driver.AppleThunderboltDPInAdapter 1.8.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.4
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.0
com.apple.driver.AppleThunderboltNHI 1.5.5
com.apple.iokit.IOThunderboltFamily 2.0.0
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.6
com.apple.iokit.IOStorageFamily 1.7.1
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 1.68f98
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.198.4.20)
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3"
"Sun Sep 2 11:08:09 2012
panic(cpu 0 caller 0xffffff80002c473a): Kernel trap at 0xffffff8000293858, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff840804ccc8, CR3: 0x000000008196e054, CR4: 0x00000000000606e0
RAX: 0xffffff8007f95678, RBX: 0xffffff8007f2e5c8, RCX: 0xffffff80008bc8c0, RDX: 0x0000000000000270
RSP: 0xffffff80ef5b3d80, RBP: 0xffffff80ef5b3da0, RSI: 0xffffff800804bac0, RDI: 0xffffff80008bcb30
R8: 0xffffff840804ccDefinitely has to be the RAM. Reinstalled the Corsair 8GB Ram about 24 hours ago and the problem has already happened twice back to back, where as it hadn't happened for a week when I reinstalled the factory RAM. Here are the two new errors. The second one happened right after rebooting from the first crash. Still can't get AHT to run. Getting a -1006D error.
"Thu Sep 13 23:12:57 2012
panic(cpu 0 caller 0xffffff80002c473a): Kernel trap at 0xffffff8000292d8b, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffffc005e411f0, CR3: 0x00000000549db04f, CR4: 0x00000000000606e0
RAX: 0xffffffc005e411e8, RBX: 0xffffff800804d9a0, RCX: 0xffffff800ab0d640, RDX: 0xffffff80008bc820
RSP: 0xffffff80efed3d00, RBP: 0xffffff80efed3d20, RSI: 0xffffff8009ee7780, RDI: 0xffffff800804d9a0
R8: 0xffffff80008bc8d0, R9: 0xffffff8009757580, R10: 0xfffffe8059403440, R11: 0x000000000022864a
R12: 0xffffff800804d9a0, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0x000000000000001f
RFL: 0x0000000000010202, RIP: 0xffffff8000292d8b, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffffc005e411f0, Error code: 0x0000000000000002, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80efed39b0 : 0xffffff8000220792
0xffffff80efed3a30 : 0xffffff80002c473a
0xffffff80efed3be0 : 0xffffff80002da0cd
0xffffff80efed3c00 : 0xffffff8000292d8b
0xffffff80efed3d20 : 0xffffff80002807b3
0xffffff80efed3d90 : 0xffffff8000281116
0xffffff80efed3dc0 : 0xffffff8000281494
0xffffff80efed3df0 : 0xffffff8000282206
0xffffff80efed3e20 : 0xffffff8000273d87
0xffffff80efed3f10 : 0xffffff8000274a3a
0xffffff80efed3f40 : 0xffffff8000547c02
0xffffff80efed3f60 : 0xffffff80005ccfe8
0xffffff80efed3fb0 : 0xffffff80002da5e9
BSD process name corresponding to current thread: Google Chrome He
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 23247177354249
last loaded kext at 4541081786167: com.apple.driver.AppleUSBCDC 4.1.17 (addr 0xffffff7f80818000, size 16384)
last unloaded kext at 4647563536520: com.apple.driver.AppleUSBCDC 4.1.17 (addr 0xffffff7f80818000, size 12288)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.9
com.waves.driver.soundgrid 2.0.0
com.Cycling74.driver.Soundflower 1.6.2
com.digidesign.iokit.DigiDal 10.1.3f53..."
Thu Sep 13 23:16:26 2012
panic(cpu 2 caller 0xffffff80002c473a): Kernel trap at 0xffffff8000293cf1, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffffc01ffb6528, CR3: 0x000000011a1ad078, CR4: 0x00000000000606e0
RAX: 0xffffffc01ffb6500, RBX: 0xffffff800804e2e8, RCX: 0xffffff8003e03a98, RDX: 0x0000000000000ed2
RSP: 0xffffff80ef5f3290, RBP: 0xffffff80ef5f32b0, RSI: 0x0000000023ae758e, RDI: 0xffffff800367e9e8
R8: 0xffffff80008bcaa0, R9: 0xffffff80080165a8, R10: 0xfffffe816b7feb30, R11: 0x000800000018970a
R12: 0xffffff80025fe000, R13: 0xffffff800804e2e8, R14: 0x00000000001013d2, R15: 0xffffff800367e9e8
RFL: 0x0000000000010246, RIP: 0xffffff8000293cf1, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffffc01ffb6528, Error code: 0x0000000000000000, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80ef5f2f40 : 0xffffff8000220792
0xffffff80ef5f2fc0 : 0xffffff80002c473a
0xffffff80ef5f3170 : 0xffffff80002da0cd
0xffffff80ef5f3190 : 0xffffff8000293cf1
0xffffff80ef5f32b0 : 0xffffff8000293e5b
0xffffff80ef5f32d0 : 0xffffff80002943d6
0xffffff80ef5f3d10 : 0xffffff8000280825
0xffffff80ef5f3d80 : 0xffffff8000281116
0xffffff80ef5f3db0 : 0xffffff8000281494
0xffffff80ef5f3de0 : 0xffffff8000282206
0xffffff80ef5f3e10 : 0xffffff8000273d87
0xffffff80ef5f3f00 : 0xffffff8000274a3a
0xffffff80ef5f3f30 : 0xffffff8000547c02
0xffffff80ef5f3f50 : 0xffffff80005cd61b
0xffffff80ef5f3fb0 : 0xffffff80002daa13
BSD process name corresponding to current thread: mdworker
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 197025147712
last loaded kext at 52304942535: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f81876000, size 28672)
last unloaded kext at 192294063887: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f80ae7000, size 65536)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.9
com.waves.driver.soundgrid 2.0.0
com.Cycling74.driver.Soundflower 1.6.2
com.digidesign.iokit.DigiDal 10.1.3f53..." -
My Imac is showing gray screen with red line when booting and restarts again
My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help
The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode -
Did anyone else have a 'you must restart your computer' screen today?
I leave my imac on 24/7. This am, I switched from my wifes user profile to miine, checked my email, got done, closed mail, and was going to open my browser (firefox) and the screen dimmed (like before going to screen saver) and then a gray message box about 3" X 4" with the circular power icon image in light gray background came on in the center of the screen, saying "You must restart your computer-please hold down your power button until computer shuts down (paraphrased). Nothing was going to allow me to do anything else (no cursor movement with the mouse, esc did nothing)so I powered down, and let it restart. Seems ok, I just want to know if anyone else has ever seen or experienced this happening. What entity would facilitate this restart? Apple? My ISP? Some spyware?
OK....I used the 'maintenance' utility, and ran scripts, repaired permissions, etc. When my computer restarted, I went to my wifes profile, ran 'disk utility' to repair permissions on her profile. Then I opened her browser and cleared her data, ie search cache, website cache, everything except her logon data. When that was done, I went back to my profile, and opened the browser. I'm at that point now, and all seems to be well. But then it seemed well when this first occured. Any guesses as to why this happened or what might have caused it to happen? A program conflict? A visit to a data-mining webpage? I know that some will tell you (or me) that macs are supposedly immune to viral or malware attacks, but there also are those who will argue that it is impossible to protect any computer, even a mac, from all infections. So, part curiosity and part pessimism create a curiosity. Any input would help.
Thanks. -
I am trying to buy help on my candy crush game but I keep getting this pop-up? Unable to Purchase. This item for an app that was purchased by a different Apple ID. To buy this item with this Apple ID, you must first purchase the app. My daughter set up this game on my Iphone. I am on level 65 and don't wont to start over if I don't have to.
Any suggestions?If it was indeed purchased with a different apple ID then there is no work around for what you want! You can try signing in with your daughter's apple ID and password and update the app and purchase whatever you want then log back in with your apple ID. This may work!
-
ipod touch..when I plug in to laptop, itunes comes up and I get this message. "Itunes could not connect to thehe Ipod because it is locked with a passcode. You must enter your passcode on the ipod b/4 it can be used with Itunes" It is stuck on the cord/itunes screen and cannot go any further...HELP
Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.
Maybe you are looking for
-
How can I install snow leopard on 2010 MacBook Pro that has no os?
I purchased a 2010 MacBook Pro on eBay and it was delivered with no operating system. It has disk utility recovery, but the choices listed don't apply. I don't have an time machine backup, nor can I restore Mavericks. I bought a copy of Snow Leopard
-
Updating My Video Driver. NEED HELP!!!
Hey there! I want to start out by saying I am in no way "tech-savey" so if you can help me out in any means, a step by step process, or a relaitively simple answer would be GREATLY appreciate! Currently, I am playing a video game on my laptop (T61 Th
-
Ora-02287 error in insert statement
Hello. I'm trying an insert query like that: insert into table(a,b,c) values ((select seq.nextval from dual), 'b-value', 'c-value' And I get that error. How can I solve it?
-
Java code to check system of another PC
i would like to check the system (i.e. CPU name, CPU speed, etc) of another PC from my PC. How will I do it? Currently, I can check the system of a PC if I launched my java application on that PC. But now, I want it to be checked via network. Can you
-
How can I show additional tab rows when using many open tabs?
How can I show additional tab rows when using many open tabs?