Start up sound changed.

Hi,
I recently sent my MBP to the depot for repairs.  After bringing it home, I noticed a change in the start up sound.  Instead of a chime, I hear a lagging sound, a slower rendition of a disk being read in the optical drive.  Unfortunately I couldn't hear this over all the chatter in the Apple store.  Is this normal?  Did this happen to other people?  Thanks!

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Similar Messages

  • Start Navigation sound in Windows 7 64 bit dissappeared

    ? [size="">I have been scratching my head over this one.
    [size="">After doing a clean install of Windows 7 64 bit on a new build this week, and installing a new X-Fi PCIe Titanium Fatality Pro, I found the start navigation windows sound was no longer there - I am talking about the brief sound you hear, that sounds like a click, when you click a link, double click a folder to open , etc. I could find the sound in windows sounds, but when I pressed test I could not hear it.
    [size="">
    [size="">After much trial and error, I discovered that I had to disable sound blaster enhancements, in the properties tab for speakers in the sound card settings. I now have that windows sound back.
    [size="">When I enable sound blaster enhancements, it goes away, when I disable them, it is back to normal.
    [size="">
    [size="">Is this normal or unique to me?

    Wow, that fixed? my problem also by disabling soundblaster enhancements. How were you able to figure that one out? I was trying to figure it'sout also many months ago when I first got windows 7 beta and couldn't do it. Anyway,
    Seems like most people don't like this start navigation sound, but I do.
    I don't like the fact of having to disable soundblaster enhancements also.
    Have you noticed that if you change the windows theme to something else it will actually work?

  • Rezound notification/alarm sounds change randomly

    Has anybody else noticed these sounds changing randomly?  I had an email arrive one night, and instead of my normal simply beep...it started randomly playing a podcast.  Needless to say, my wife is not amused with my new phone.  This morning, instead of being awoken by my typical song that starts off slow, and slowly builds...it randomly changed to a song that starts off with a loud screeching sound.
    Of course, now that I am outside of my return period, my wife is threatening to throw my phone across the room if it wakes her up in the middle of the night with a frightening sound again.  Any thoughts?  I know there are more people with this problem, as I saw it listed as one of the "other widespread" problems on the XDA forums (http://forum.xda-developers.com/archive/index.php/t-1342600.html).
    Any thoughts?

    Are all your notifications tones custom ones?  Are the custom tones saved in the following folder structure?  This is the default folders that I have found that Android defaults to looking in first after the system folders and will automatically add the tones to the proper selections lists.
    (Internal or the SD card memory):\media\audio\ringtones
    (Internal or the SD card memory):\media\audio\notifications
    (Internal or the SD card memory):\media\audio\alarms
    I did have a similar issue with my Thunderbolt after a system update.  I was finally able to clear the issue up by clearing all the data in the "HTC Sense" app.  I had to set up all my homescreens, wallpaper, and ringtones all over again.  It was worth the effort since it was wasn't full factory reset.  Of which I was planning to do if the data clearing didn't work.

  • MMacBook Pro (13-inch, Mid 2010) switches on but internal display remains off/black .There is no start-up sound and the fan starts off normal but after about Five minutes begins to run even faster

    Hi ,
    My MacBook Pro (13-inch, Mid 2010) switches on but internal display remains off/black .There is no start-up sound and the fan starts off normal but after about Five minutes begins to run even faster as if the machine is running a heavy load.It displayed a question mark some time back then a friend borrwed it ,he flashed the system and put windows 7.Then a few days pasted and now it wont display as stated.I have tried to Reset SMC and the Command + P + R + Power but still no response.Please assist?
    Regrads Josh

    I think your "friend" caused a problem (or two).
    I do not know what "flashed the system" means......
    Based on what was done, I would probably erase the HD and restore the system from a backup before the software changes were made.
    Barry

  • 6790 - start up sound

    Is there any way to turn off or change the start up sound on the 6790 slide?  I find it annoying.
    Thanks

    On some phones you have the provision for ON/OFF the startup tone.. Check in phone settings if its there.. else not possible...
    --------------------------------------------------​--------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

    Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen  and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine.  My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's.  On the non-working Ipods, the  Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
    any help is appreciated. Chris4sail

    Hello there, chris4sail.
    The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • When I went to turn the desktop on, the start up sound came on.  Then the screen was white with an icon flashing. The icon is a file folder with a question mark on it.  I cannot get it to fully turn on.  HELP

    When I went to turn the desktop on, the start up sound came on.  Then the screen was white with an icon flashing. The icon is a file folder with a question mark on it.  I cannot get it to fully turn on.  HELP

    Run a disk repair tool on the hard disk or install a new OS.
    (59898)

  • My iMac won't boot, get a black screen with alarm sound, then gray screen with start up sound, then repeats

    this problem started last fall after upgrading to Mavericks. If I shut down my computer (or restart) I have problems getting it going again. This is getting progressively worse. I hadn't shut down in over a month, forgot about this issue and shut down (which I used to do daily), so now I can't get my computer to boot. When I hit the power button I hear it starting, then a loud alarm sounds, then a long pause then start up sound with a gray screen with a progress bar. Once the progress bar fills, the screen goes black again for a bit. This whole process will repeat until I get frustrated and force - shut down by holding the power button. I have tried reseting the pram, starting up in safe mode, starting up with the command - R, starting up with my original install disc... none of it works. I'm at a loss! I do have an external hard drive that I have been using for Time Machine, but it's not recent because the disc needs repairs and I hadn't gotten around to buying a new HD to back up to first. Has anyone else had this problem? I really can't afford a big repair/replacement bill.

    A long, steady, load tone followed by a progress bar can indicate it is trying to install a Firmware Update.  Any other Tones would be multiple beeps and show an error code.
    http://support.apple.com/kb/HT5860
    You can also see a progress bar similar to booting into Safe Mode. However, the firmware update bar is thinner vertically than the Safe Mode bar.
    http://support.apple.com/kb/ht1455
    Either way, I would say something is wrong and it would be better evaluated at an Apple Store as Kappy points out.

  • HT3964 My MacBook Pro will not boot up. The screen remains dark although the the comput makes the characteristic start up sound. The sleep light is showing.

    MY MacBook Pro will not boot upThe screen is dark, but the sleep light is on and it makes the characteristic start up sound.What is wrong?

    There is always the forum for MBP
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro

  • My start up sound is gone after I got the Maverick for my MacBook Pro. Is that supposed to happen?

    I just uploaded Maverick onto my MacBook Pro and now the start up sound is gone. Is that supposed to happen?

    Hmm.....I tryed that and there isn't anything that pertains to the start up sound. I guess I have to keep searching. Thanx for the help though.

  • Question re start-up sound

    I have an iMac 10.6.8 how do you shut off just the start-up sound without turning off the muting volume
    Thanks
    Deej1

    Silence Your Mac Boot Startup Sound Altogether
    How to Mute the Mac Startup Sound
    How to Disable the Mac Boot Chime Completely
    How To Turn Off Startup Sound

  • Hello I got a iPad mini in January and speakers are started to sound right can you help

    Hello I got a iPad mini in January and the speakers have starting to sound like they are not working propyl can you help thank you

    Hi antony136,
    Thanks for visiting Apple Support Communities.
    If you are not able to hear clearly through your iPad mini speakers, start with the troubleshooting steps in this article:
    iOS: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    Note that some steps refer to troubleshooting on an iPhone, but the steps can help with an iPad mini as well.
    Regards,
    Jeremy

  • Is it possible to play my guitar and have the sound changed to different instrument like a sax? Like an emulator.

    Is it possible to play my guitar and have the sound changed to different instrument like a sax? Have my Mac act as an emulator. I'm a guitar player, not a sax player, but I want a sax solo in my song. 

    You'd need a midi guitar for that. GarageBand does not create midi from audio. Use a different application, like Finale to create a midi file from your Guitar audio file.
    Or play the sax track using a midi keyboard or simply GarageBand's musical typing. You can use the track editor to add expression and articulation afterwards.

  • Is there a way to shut off the start-up sound?

    how do I turn off the start-up sound that plays when I turn on my macbook?

    Try downloading Psst from www.macupdate.com. There is also another, called something like startupchime.prefpane or something like that. Look around macupdate using words like chime and startup chime, and you'll find a way.

  • Video started to sound awful when i've updated to iOS6, how can this be fix?

    Hi,
    Ever sine i've updated to iOS6 this October, the sound of my videos on my iPad started to sound awful. I'm using the default video player for iPad. It sounds like there's an echo, bass sounds has totally low quality and etc.
    I tried removing the videos(music video) on my iPad then resync it but it still sounds different from before. I've tested the sounds in my mp3 (same song) still sounds as expected. So my sound setting and my headset are not defective.
    Please teach me how can i fix this issue.
    Thanks

    What app are you using?
    Do you get sound from the YourTube app
    From other website?
    I suspect a problem with the specific site you are using, not an iPod problem. Can you post a link to that site?

Maybe you are looking for

  • Cannot capture, but can do pretty much everything else with deck. What now?

    Hello everybody, I'm writing for the Gateway Media Center. We're basically a small group of students which handles anything video or TV related for a public school district, mainly the high school. Our main editing system (Mac connected to a MiniDV d

  • Scatter Plot Problem!!

    Hello everyone, I am quite new at Labview and I have a question regarding plotting 2d-array in a scatter plot. I would like to plot my data as a scatter plot, which I have done with the Waveform graph, and now I would like to find out the area with t

  • Issue in TO Confirmation

    Gurus I have an issue with Transfer order confirmation Error :Storage Unit already exists , Check your number range Can anyone pls help me out on how to resolve this issue It is very urgent BR Avinash

  • Does apple make a iPad dock, for the new iPads (lightening) ? Thx

    does apple make a iPad dock, for the new iPads (lightening) ? have looked 'everywhere' found some options but not an apple design (i.e. doesnt match my other apple docking stations). Any assistance would be appreviated. Thank you.

  • Password protect Mail on iPad

    Just got a brand new iPad.  Is there a way natively or via another app to password protect the Mail application?  I'd love to be able to let others use the iPad for internet browsing or games, but with Mail if you click it you can get right into all