Start up sound idea s6000

I have a tablet Lenovo s6000 . when i full shut down and start up it makes start up sound. Is there a way to disabel that hard start up sound?
Solved!
Go to Solution.

Welcome to Lenovo Community! pertono
AFAIK, from my IdeaPad K1, the startup / shutdown sound could not be disabled. You could try your luck by setting the volume to 0 and shutdown. Then startup again to see if the sound is disabled,
Peter
W520 (4284-A99) | Samsung Galaxy S3 i9300 - Cyanogenmod 10.2 / GoogyMax Kernel
Give kudos to reward people for their assistance | Mark the thread solved if the solution works | Direct e-mail regarding technical problems will be ignored
=====================================
Dolby ; IdeaPad Slate Tablet ; Equalizer APO

Similar Messages

Wont Boot, but has start up sound

Imac G5, I push the power button, I hear the start up sound then I hear the end of the start up sound every 2 seconds or so...like it is stuck in a loop. Tried pram, safe mode, I even took out the hard drive, Still the same. Any Ideas?

I tied cd, power button works perfect, It does the Start up chime on the gray screen, then it sounds like it plays the very end of the start up chime every 2 - 3 seconds.. so it doesnt get through the post. so any keyboard short cuts are unavailable.

Start Navigation sound in Windows 7 64 bit dissappeared

? [size="">I have been scratching my head over this one.
[size="">After doing a clean install of Windows 7 64 bit on a new build this week, and installing a new X-Fi PCIe Titanium Fatality Pro, I found the start navigation windows sound was no longer there - I am talking about the brief sound you hear, that sounds like a click, when you click a link, double click a folder to open , etc. I could find the sound in windows sounds, but when I pressed test I could not hear it.
[size="">
[size="">After much trial and error, I discovered that I had to disable sound blaster enhancements, in the properties tab for speakers in the sound card settings. I now have that windows sound back.
[size="">When I enable sound blaster enhancements, it goes away, when I disable them, it is back to normal.
[size="">
[size="">Is this normal or unique to me?

Wow, that fixed? my problem also by disabling soundblaster enhancements. How were you able to figure that one out? I was trying to figure it'sout also many months ago when I first got windows 7 beta and couldn't do it. Anyway,
Seems like most people don't like this start navigation sound, but I do.
I don't like the fact of having to disable soundblaster enhancements also.
Have you noticed that if you change the windows theme to something else it will actually work?

My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this

My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?

a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.

I'm trying to sync a new i phone to i tunes. I get message that says cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?

I'm trying to sync a new iphone into i tunes. I'm getting a message that says that this iphone cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?

See Here...
AMDS for Windows
http://support.apple.com/kb/TS1567
AMDS for Mac
http://support.apple.com/kb/ht1747

When I went to turn the desktop on, the start up sound came on. Then the screen was white with an icon flashing. The icon is a file folder with a question mark on it. I cannot get it to fully turn on. HELP

When I went to turn the desktop on, the start up sound came on. Then the screen was white with an icon flashing. The icon is a file folder with a question mark on it. I cannot get it to fully turn on. HELP

Run a disk repair tool on the hard disk or install a new OS.
(59898)

My iMac won't boot, get a black screen with alarm sound, then gray screen with start up sound, then repeats

this problem started last fall after upgrading to Mavericks. If I shut down my computer (or restart) I have problems getting it going again. This is getting progressively worse. I hadn't shut down in over a month, forgot about this issue and shut down (which I used to do daily), so now I can't get my computer to boot. When I hit the power button I hear it starting, then a loud alarm sounds, then a long pause then start up sound with a gray screen with a progress bar. Once the progress bar fills, the screen goes black again for a bit. This whole process will repeat until I get frustrated and force - shut down by holding the power button. I have tried reseting the pram, starting up in safe mode, starting up with the command - R, starting up with my original install disc... none of it works. I'm at a loss! I do have an external hard drive that I have been using for Time Machine, but it's not recent because the disc needs repairs and I hadn't gotten around to buying a new HD to back up to first. Has anyone else had this problem? I really can't afford a big repair/replacement bill.

A long, steady, load tone followed by a progress bar can indicate it is trying to install a Firmware Update. Any other Tones would be multiple beeps and show an error code.
http://support.apple.com/kb/HT5860
You can also see a progress bar similar to booting into Safe Mode. However, the firmware update bar is thinner vertically than the Safe Mode bar.
http://support.apple.com/kb/ht1455
Either way, I would say something is wrong and it would be better evaluated at an Apple Store as Kappy points out.

HT3964 My MacBook Pro will not boot up. The screen remains dark although the the comput makes the characteristic start up sound. The sleep light is showing.

MY MacBook Pro will not boot upThe screen is dark, but the sleep light is on and it makes the characteristic start up sound.What is wrong?

There is always the forum for MBP
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

My start up sound is gone after I got the Maverick for my MacBook Pro. Is that supposed to happen?

I just uploaded Maverick onto my MacBook Pro and now the start up sound is gone. Is that supposed to happen?

Hmm.....I tryed that and there isn't anything that pertains to the start up sound. I guess I have to keep searching. Thanx for the help though.

Question re start-up sound

I have an iMac 10.6.8 how do you shut off just the start-up sound without turning off the muting volume
Thanks
Deej1

Silence Your Mac Boot Startup Sound Altogether
How to Mute the Mac Startup Sound
How to Disable the Mac Boot Chime Completely
How To Turn Off Startup Sound

Hello I got a iPad mini in January and speakers are started to sound right can you help

Hello I got a iPad mini in January and the speakers have starting to sound like they are not working propyl can you help thank you

Hi antony136,
Thanks for visiting Apple Support Communities.
If you are not able to hear clearly through your iPad mini speakers, start with the troubleshooting steps in this article:
iOS: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
Note that some steps refer to troubleshooting on an iPhone, but the steps can help with an iPad mini as well.
Regards,
Jeremy

Is there a way to shut off the start-up sound?

how do I turn off the start-up sound that plays when I turn on my macbook?

Try downloading Psst from www.macupdate.com. There is also another, called something like startupchime.prefpane or something like that. Look around macupdate using words like chime and startup chime, and you'll find a way.

Video started to sound awful when i've updated to iOS6, how can this be fix?

Hi,
Ever sine i've updated to iOS6 this October, the sound of my videos on my iPad started to sound awful. I'm using the default video player for iPad. It sounds like there's an echo, bass sounds has totally low quality and etc.
I tried removing the videos(music video) on my iPad then resync it but it still sounds different from before. I've tested the sounds in my mp3 (same song) still sounds as expected. So my sound setting and my headset are not defective.
Please teach me how can i fix this issue.
Thanks

What app are you using?
Do you get sound from the YourTube app
From other website?
I suspect a problem with the specific site you are using, not an iPod problem. Can you post a link to that site?

How can I disable start up sound?

how can I disable start up sound?

Welcome to the Apple Discussions!
http://www.silvermac.com/2006/mac-os-x-start-up-sound-volume-control/
It's a preference pane control that allows you to adjust the volume of the startup sound or disable it completely.
Hope this helps!
-Mike

Start up sound idea s6000

Similar Messages

Maybe you are looking for