Start up takes several minutes to load, need to correct the problem?

Product # VM222UA#ABA
Windows 7
No error message
No changes made to computer

Test the hard drive and memory modules, post back any errors
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00439024&tmp_task=solveCategory&cc=us&dlc=en&la...

Similar Messages

Suddenly FF has started to take several minutes to load from the Icon. Thunderbird still loads instantly. I am using Microsoft OS

I use Vista Microsoft OS and have FF and Thunderbird icons installed. Over the last through weeks the FF Icon has often taken several minutes to load the front page. Thunderbird still loads fairly much instantly.
The problems became more noticeable following a recent MS upgrade

Have Windows Updates been applied? See my note about this
https://twitter.com/imorrish/status/491020435039854592
Look at the URL in the search results. It may have invalid character in which case you can use this fix
http://blogs.msdn.com/b/spses/archive/2014/06/30/sharepoint-2013-the-search-results-with-5c-the-character-will-become-double-encoded-and-causes-broken-links.aspx
Regards,
Ian
http://sps.cloudapp.net
Regards, Ian Internet Sites running on SharePoint 2013 http://j.mp/sp2013sites

OSX 10.9.5 start up takes several minutes to connect to internet

My mac mini has now got a faster boot up time since having a SSD installed. However, I have noticed it takes several minutes for it to connect to the internet. Under Login Items, I use to have my NAS setup to connect a drive on start up. But, I always received the error "There was a problem connecting to server." I removed it.
What I have tried so far:
Upgraded from 10.8.5 to 10.9.5, that didn't change anything.
I have a Airport Extreme router (7.6.4) and even swapped it out for a Linksys router to see if that was the issue. That didn't matter.
All new ethernet cables for the router and mac mini.
Firewall turned off on OSX. I have since turned it back on since that didn't change anything. I do have Little Snitch running too.
Any other suggestions would be greatly appreciated.

Welcome to the Apple discussions.
When you say your machine is near capacity ... you want to keep at least 10% of your hard drive empty for systems usage. Less than that and the system slows way down.
One thing you can do is to use this tool to see what your largest files are on your system - move data to an external hard drive and delete, or just delete unused/un-needed data: http://software.filefactory.com/Mac/WhatSize_10-3-91.html
You might also run MacJanitor to run the daily/weekly/monthly scripts, which sometimes don't run automatically: http://personalpages.tds.net/~brian_hill/macjanitor.html. Some have found using a utility like OnyX can help with disk space. OnyX is available from http://www.titanium.free.fr/pgs2/english/download.html . Note OnyX does the same thing MacJanitor does, plus much more.
You can use Monolingual to delete the languages you know you'll never use from the operating system - depending on choices it can save over 1GB. Choose language options carefully, as you can muck things up if you rush through it: http://monolingual.sourceforge.net/
This FAQ is good reading on maximizing disk space: http://www.thexlab.com/faqs/freeingspace.html

Firefox takes several minutes to load

It takes several minutes for Firefox to load every time I log in. Takes longer if computer is started. Have troubleshot everything I could find with no avail. It's getting old and all that I have read I can't believe Mozilla has not heard and fixed this problem.
== This happened ==
Every time Firefox opened
== I think it was when I updated.

The question certainly isn't solved. I have no trouble with speed when entering sites - it's just when first trying to enter Mozilla. I tried IE this morning as a test and was into the home page in a few secomds. Moxilla 8 takes about a minute and a half. Version 3.6 loads immediately. I previously tried vers 8 a couple of weeks ago and web sites took a long time to load. This was not a problem after using vers 3.6 for a while and then re-downloading vers 8. I am still frustrated by the slow load up time it takes to get to the home page and believe this may be something the system administrators need to fix..

Firefox 3.6 takes several minutes to load under windows 7 ultimate 64 bit

Firefox was working fine on windows 7 x64. Then I loaded some shell extensions to allow symmmbolic links to fies as my SSD was filling up and I wanted to move some applcation data off the system drive. This caused problems with acronis backup so I unloaded the extensions and reinstalled acronis. Not everything works as before except that firefox takes 3 minutes to load. When initiated it shows up in the processes on process explorer as running but doesn't show up as an applicationrunning for three minutes or so.
Have tried unlintstalling and reinstalling firefox, allowing it through my firewall and using the prefetch option in the shortcut without success.

Yeah i have done that a couple of times. When i navigate through the disk it doesn't even let me run setup.exe, so i installed from bootcamp64.msi. Then after 3.0 installs, i try to update to 3.1 and after the nvidia install, it just quits. When i use my version tracker it says that boot camp is in version 3.0, and it shows an update for 3.1 in software update. Now when i go to uninstall programs, it shows boot camp 3.1 is installed.
As far as the audio, i have tried that as well. If i manually put a driver into that device, it fails on every reboot. It only shows working on Microsoft High Deff Audio Drivers( and it actually dosnt even work, it just glows red on my head phone jack.)
Im stumped.

Apple TV (Gen 2&3) takes several hours to load a movie from the iTunes Library

I know this had been discussed before, but a went through all posts that I could find and never found a solution. I will list below everything I have tried and if anyone else has ANY ideas I would be extremely greatful to hear them! To reiterate the issue any time I try to play a movie from MY iTunes library it takes several hours before it will even start playing. Now, to what I have already tried...
1. I cycled my router first and after that didn't work I completely took it back to default settings. My router is an Apple Airport Extreme
2. I completely uninstalled iTunes and then reinstalled it with full library, and then I also tried with just one movie in my library that I know used to work. My home computer is a Windows 7 PC.
3. I restarted my Apple TV, and also bought a Gen. 3 Apple TV and tried it new out of the box.
4. I have tried to stream on both WiFi and hooked up to an Ethernet Cable.
5. I have tried with all firewalls turned off on the PC and router.
6. I have ended home sharing on all devices and restarted home sharing on just the Apple TV and PC.
7. I have turned off all devices using WiFi in the home.
That is all I can think of off hand so if you have any other ideas please do not hesitate to chime in so I can try something else. Do know that my Apple TV used to not have any issues and worked great since I irst purchased the Gen. 1 Apple TV.
PLEASE HELP!!!!!!!

I have the same problem. I just purchased the Apple TV software 5.0. Apple TV is working other than downloading movies. I have been trying to download one movie for the past two days. I have a wireless network, using AT&T DSL. I have tested the connection using the test option in the Settings area of the Apple TV, which passes.
I have also tried rebooting my Apple Tv and turned off all other wireless options. I am able to download Netflix movies using the PS3 without a problem, why not on my Apple TV. I hope I didn't just purchase this device to stream music and photos.
I hope someone has a solution to this problem.
By the way I just upgraded my modem and router (Airport Extreme).
Thanks for the help!!!!

I am having difficulties loading pages. For example: I am on the powerschool web site looking at my child's grades. I want to get into a specific class and the page either takes many minutes to load or I get the error message that the page can't load. He

Can't get into specific class grades. It's not just here though; many pages load and load and load taking an extremely long time only to get an error message.
== URL of affected sites ==
http://ps.hibbing.k12.mn.us/public/home.html

Hello, could this be it?
Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality
http://support.apple.com/kb/HT5559

TS1702 I download the app eNotify to my iPhone 4 but have not being able to linked to my Gmail account. Keep giving me the notice that user or server is not correct. What I need to correct the problem?

I download the app eNotify to my iPhone 4 but could not linked to my Gmail account. Give me notice that user or server given is incorrect. It instructed me to go to phone settings and make correction but not working still. I need help. I"m not savy in technology.

Hello there! You can contact Verietas Support at [email protected] The most usual error for gmail is that user name is NOT the full email address. You just want to enter the stuff BEFORE "@gmail.com". Good luck!

How can I resolve an issue where webpages take several minutes to download? Other computers working on the same home network take not time at all.

Firefox would not load webpage despite there being an active internet connection to the computer. I know this because firefox loaded on another home computer without any issues. I reset the ip address on the computer in question through cmd.exe and this helped the issue to an extent however it take several minutes to load webpages. I can also advise tha Internet Explorer suffered exactly the same issue and it gave me an error message early when unable to load webpages, that a remote firewall may be blocking the connection. It suggested to configure the firewall to allow connections thru TCP port 80.

Hello ,
Can you please post your ADSL stats by following this direct link; http://192.168.1.254/index.cgi?active_page=9116 << it only works if you have a Home Hub 2.0+ and remember to type your password in.
Also we need a speedtest Use this link http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 as it will also help you diagnose and give you a list of solutions afterwards, it does incorporate the http://www.speedtester.bt.com one though as well.
It sounds to me that you have a low profile, with your stats we can see if you've been having disconnections which makes the exchange raise your Noise Margin to try and increase your stabibility, but at a cost of speed, it may have been that your sync speed has recovereed, but not your IP Profile.
Here are some helpful (I actually did find them helpful!) tips from BT: http://bt.custhelp.com/app/answers/detail/a_id/35079 up to you whether you want to read those tips, because I did actually find them helpful.
Can you comfirm that you have no noise on the line. Really a test by dialling 17070 and pressing option 2 for the quiet line test should be completed in the Master Socket with no other devices connected to the line. ANd also do you have a master socket with a split faceplate that you can unscrew the bottom half, if so behind there is a hidden 'test socket', it disconnects all your internal wiring so just to make sure its not a fault inside your premises.
Regards Edd
Check your Line
BT Speedtester

When I rent a movie using Apple TV, it takes several hours to load and then I select watch later. When I go to my rented movies and try to watch it , it starts loading all over again. This can't be normal. Is there something that I am doing wrong?

When I rent a movie using Apple TV,it takes several hours to load. At this point, I opt to watch later. When I try to watch the movie, it starts loading again and tells me that it will be ready to watch in one hour forty four minutes. This can't be normal. Is there something I am doing wrong? Any suggestions.

If it's taking several hours then that is likely due to your internet connection. You can verify at speedtest.net
6mbps required for instant 720P
8mbps for 1080P
You can switch to SD in the settings (which only requires 3mbps)
You can also check istumbler or netstumbler for interference
Make sure you are on your ISPs DNS
The reloading is normal. There is no accessible storage on ATV. The small flash is used for caching streamed content, if you access other things or turn the device off it will be flushed.

Start of integration builder takes several minutes

I have a similar problem as described in this topic.
Re: Visual Administrator Tool does not load 100%
When I start the integration builder it takes only a few moments until the logon dialog displays. But after entering the logon information it takes at least 5 minutes to load. And opening the first development object (interface, mapping etc.) takes also a few minutes.
I have this problem since updating my XI test system. Integration Builder of my XI prod system works fine.
XI Test:
XI Version: 3.0 SP 15
J2EE Version: 6.40 PatchLevel 100627.313
XI Prod:
XI Version: 3.0 SP 13
J2EE Version: 6.40 PatchLevel 88028.313
I have set the value MaxThreadCount to 150 as suggested in the thread mentioned. This has no effect on my problem. Of course the J2EE server was restarted.
I have no idea how I ca fix that problem.

> Hello Gil,
>
> OK, I've two things to mention:
>
> P4 protocol and bindHost. There were some problems
> reg. that, please refer to SAP Note: 883943. The
> bindHost value should be 0.0.0.0, especially, if the
> host has multiple network cards.
We have sp15 on our XIT and the problem with bindHost should be fixed. O course we have checked that. BindHost is set to 0.0.0.0 .
> JDK 1.4.2_10 is not recommended by SAP. Please refer
> to SAP Note: 716604. This JDK caused some problems
> during installation; the problems were related to
> database access.
>
We use java 1.4.2_10 on both systems, XIT and XIP. We had no problems during the installation. We had a going live check on our XIP 3 weeks ago. Java version was checked as ok.

Javascript (in Firefox 3) takes several minutes to start working when computer wakes from sleep, Mac OSX 10.5.8

Whenever I wake my Mac from sleep, with Firefox having been left running, some parts of Firefox take several minutes to start working again. These include switching between open tabs and any website functionality that uses javascript, eg gmail. This has gone on through many updates of Firefox. If I quit Firefox immediately on waking the Mac and restart it, everything is OK.

The following worked for me:
http://support.mozilla.com/en-US/questions/684867
"Problem: I had the same problem but with mac osx 10.5.8, Firefox 3.6.6 sometimes prints and sometimes does not, but the preview was always blank and I could not save to pdf file.
Solution: I downloaded Firefox 3.5.10, installed it on my desktop and opened it, tried print preview and it worked, quit Firefox 3.5.10 and ran 3.6.6 and voila! print preview is working fine and I can save to pdf fine.
I guess running 3.5.10 fixes the profile in a certain way. I have no idea how that happened but it worked."

IMac will not start following OS X 10.9.4 update - takes 30 minutes to load and then turns off

iMac will not start following OS X 10.9.4 update - takes 30 minutes to load with spinning wheel and progress bar and then when it appears to be finished it powers off?

Thanks for the suggestion - this was the 1st thing I tried but it does not appear to work either. I'm still getting the 30 minute spinning wheel and slow moving progress bar on a grey background - even if I try to start the iMac in 'safe' mode!

Yaourt takes several minutes before start downloading

Hello everyone, I'm having a problem when I want to deal with any package in AUR repo using yaurt. It takes several minutes before start downloading.
For example:
$:> time yaourt -Ssa package-query
aur/package-query 1.1-2 [installed] (1656)
Query ALPM and AUR
aur/package-query-git 20120121-1 (198)
Query ALPM and AUR
real 1m5.524s
user 0m0.287s
sys 0m0.053s
Any suggestion???
Thanks in advance!!
*sory for my englsh, I'm from Argentina. ;D
Last edited by emab73 (2012-11-20 16:14:55)

I know it doesn't answer your specific question but you could experiment with another AUR helper. Or just use makepkg.

Opening Excel 2010 files from Explorer takes several minutes

I am running Excel 2010 on Windows 7. For the last year I have had no problems, but today I find that if I try to open any file from Windows Explorer (e.g. by double-clicking it), or from an item pinned to the Task Bar, it takes several minutes to open Excel.
If I open Excel directly it opens very quickly. I can also open any of the "problem" files in an instant when Excel is open (e.g. from the Recent Files list or from the File...Open dialog). All of the files in question are on the local hard
disk.
I don't have this problem with MS-Word.
I saw another post here which recommended unchecking the "Ignore
other applications that use Dynamic Data Exchange (DDE)" option, but I didn't have this option set in the first place.
Does anyone have any other suggestions for fixing this?

Double click an excel file, when the excel loading window appears, start Task Manager, terminate the excel process, then re-open the excel file to test if this issue goes away.
Also someone resolved this issue by installing an add-in. Have a try.
File->options->Add-ins->Select "Excel Add-Ins" in Manage list box and click button "Go..." ->Tick the add-ins that you want and click button "OK"
http://excel2007-slow-open-file.blogspot.in/

Start up takes several minutes to load, need to correct the problem?

Similar Messages

Maybe you are looking for