Start up test failed. comupter wont start up on mini notebook

Computer crashed. No disc drive to recover.

Hi
I need the product number for the unit. Also, please go to the test logs and find out which component failed. I have a feeling that it is the motherboard or hard drive, but cannot be sure.

Similar Messages

[Hard Disk Test Failed] - HP ENVY 14-1260se Beats Edition Notebook PC

Hey, I've been getting "SMRT Hard Disk Error" messages recently and ran hard disk test. The results are: "Hard Disk 1 Full" (0305)"Hard Disk 1 SMART" (0301) I was wondering what hard drive should I purchase to fix these problems? Thanks!

Hi,
You can order a replacement set of Recovery Discs starting on the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Error in EMS - Test failed - BAM-00553: Resources start operation

All:
I am setting up a JMS Module with Foreign Server. I have created 2 Modules....the 2nd one is exactly similar as the first one.
I get an error: Test failed - BAM-00553: Resources start operation for destination jms/BAM01Topic failed when I do the Test for the EMS in BAM Architect.
I have restarted BAM Managed Server and also the WLS server...doesn't help.
Here are the config files:
This works:
<?xml version='1.0' encoding='UTF-8'?>
<weblogic-jms xmlns="http://xmlns.oracle.com/weblogic/weblogic-jms" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/weblogic-jms http://xmlns.oracle.com/weblogic/weblogic-jms/1.0/weblogic-jms.xsd">
<foreign-server name="BAM_EBIZ_FOREIGN">
<default-targeting-enabled>true</default-targeting-enabled>
<foreign-destination name="BAM_OM_EBIZ">
<local-jndi-name>jms/BAMEBIZTopic</local-jndi-name>
<remote-jndi-name>Topics/XX_OM_MONITOR_Q</remote-jndi-name>
</foreign-destination>
<foreign-connection-factory name="BAM_EBIZ_CF">
<local-jndi-name>jms/BAMEBIZTopicCF</local-jndi-name>
<remote-jndi-name>TopicConnectionFactory</remote-jndi-name>
</foreign-connection-factory>
<initial-context-factory>oracle.jms.AQjmsInitialContextFactory</initial-context-factory>
<jndi-property>
<key>datasource</key>
<value>jdbc/db/EBSAM</value>
</jndi-property>
</foreign-server>
</weblogic-jms>
This doesn't:
<?xml version='1.0' encoding='UTF-8'?>
<weblogic-jms xmlns="http://xmlns.oracle.com/weblogic/weblogic-jms" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/weblogic-jms http://xmlns.oracle.com/weblogic/weblogic-jms/1.0/weblogic-jms.xsd">
<foreign-server name="BAM001_FOREIGN">
<default-targeting-enabled>true</default-targeting-enabled>
<foreign-destination name="BAM001_EBIZ">
<local-jndi-name>jms/BAM01Topic</local-jndi-name>
<remote-jndi-name>Topics/XX_OM_BAM01_Q</remote-jndi-name>
</foreign-destination>
<foreign-connection-factory name="BAM001_EBIZ_CF">
<local-jndi-name>jms/BAM01TopicCF</local-jndi-name>
<remote-jndi-name>TopicConnectionFactory</remote-jndi-name>
</foreign-connection-factory>
<initial-context-factory>oracle.jms.AQjmsInitialContextFactory</initial-context-factory>
<jndi-property>
<key>datasource</key>
<value>jdbc/db/EBSAM</value>
</jndi-property>
</foreign-server>
</weblogic-jms>
Any help will be greatly appreciated.
Santanu

Deepan,
Here are the exports for EMS
<?xml version="1.0"?>
<OracleBAMExport Version="2025">
<EMS Version="2" Name="FINISH_PAY_HIST" ID="8"^M
<EnterpriseMessageSource version="6"><Description><EMSType>EMST.ORACLE</EMSType><Location><Part1>weblogic.jndi.WLInitialContextFactory</Part1>
<Part2>t3://uslx46c.intranet.local:9001</Part2>
<Part3>jms/BAMEBIZTopicCF</Part3>
<Part4>jms/BAMEBIZTopic</Part4>
<Part5>aiujd16</Part5>
<Part6>###3aYwb6Ww68LmirhFwkn5I8wn7OxTPrkzUqM34Y6s1tI=</Part6>
<Part7>8</Part7>
<Part8>TEMP1</Part8>
<Part9/>
<Part10>/Test DO/FINISH_PAY_HIST</Part10>
<Part11>1</Part11>
<Part12>1</Part12>
<Part13>1</Part13>
<Part14>Yes</Part14>
<Part15/>
<Part16/>
</Location><Fields><Field System="0"><ID>DummyName</ID><Key>off</Key><ProvidersName>DummyName</ProvidersName><DisplayName>DummyName</DisplayName><Type>String</Type><MaxSize>0</MaxSize><PackingSpec Type="XML"><BatchNamespaceURI/><MsgNamespaceURI/><BatchNode/><RootNode>ORDER</RootNode><Path/><DTPattern/><DTLanguage/><DTCountry/><DTVariant/><Fields Type="Tags"><Field Key="true" Type="String"><Name>EXTRACT_WEEK</Name><DisplayName>EXTRACT_WEEK</DisplayName></Field><Field Key="true" Type="String"><Name>EXTRACT_TYPE</Name><DisplayName>EXTRACT_TYPE</DisplayName></Field><Field Key="true" Type="String"><Name>ORG_ID</Name><DisplayName>ORG_ID</DisplayName></Field><Field Key="true" Type="String"><Name>ORDER_NUMBER</Name><DisplayName>ORDER_NUMBER</DisplayName></Field><Field Key="false" Type="String"><Name>RECEIPT_TYPE</Name><DisplayName>RECEIPT_TYPE</DisplayName></Field><Field Key="false" Type="String"><Name>PAYMENT_TYPE</Name><DisplayName>PAYMENT_TYPE</DisplayName></Field><Field Key="false" Type="String"><Name>BUCKET_HIGH</Name><DisplayName>BUCKET_HIGH</DisplayName></Field><Field Key="false" Type="String"><Name>BUCKET</Name><DisplayName>BUCKET</DisplayName></Field><Field Key="false" Type="String"><Name>ELAPSED_TIME</Name><DisplayName>ELAPSED_TIME</DisplayName></Field></Fields></PackingSpec></Field></Fields></Description></EnterpriseMessageSource>^M
</EMS>
</OracleBAMExport>
<?xml version="1.0"?>
<OracleBAMExport Version="2025">
<EMS Version="2" Name="FINISH_PAY_HIST1" ID="9"^M
<EnterpriseMessageSource version="6"><Description><EMSType>EMST.ORACLE</EMSType><Location><Part1>weblogic.jndi.WLInitialContextFactory</Part1>
<Part2>t3://uslx46c.intranet.local:9001</Part2>
<Part3>jms/BAM01TopicCF</Part3>
<Part4>jms/BAM01Topic</Part4>
<Part5>aiujd16</Part5>
<Part6>###ojE/zWMN2kMfDgtjuKomSBqC7TiPgDCGT5rrmlH4yXs=</Part6>
<Part7>8</Part7>
<Part8>TEMP1</Part8>
<Part9/>
<Part10>/Test DO/FINISH_PAY_HIST1</Part10>
<Part11>1</Part11>
<Part12>1</Part12>
<Part13>1</Part13>
<Part14>Yes</Part14>
<Part15/>
<Part16/>
</Location><Fields><Field System="0"><ID>DummyName</ID><Key>off</Key><ProvidersName>DummyName</ProvidersName><DisplayName>DummyName</DisplayName><Type>String</Type><MaxSize>0</MaxSize><PackingSpec Type="XML"><BatchNamespaceURI/><MsgNamespaceURI/><BatchNode/><RootNode>ORDER</RootNode><Path/><DTPattern/><DTLanguage/><DTCountry/><DTVariant/><Fields Type="Tags"><Field Key="true" Type="String"><Name>EXTRACT_WEEK</Name><DisplayName>EXTRACT_WEEK</DisplayName></Field><Field Key="true" Type="String"><Name>EXTRACT_TYPE</Name><DisplayName>EXTRACT_TYPE</DisplayName></Field><Field Key="true" Type="String"><Name>ORG_ID</Name><DisplayName>ORG_ID</DisplayName></Field><Field Key="true" Type="String"><Name>ORDER_NUMBER</Name><DisplayName>ORDER_NUMBER</DisplayName></Field><Field Key="false" Type="String"><Name>RECEIPT_TYPE</Name><DisplayName>RECEIPT_TYPE</DisplayName></Field><Field Key="false" Type="String"><Name>PAYMENT_TYPE</Name><DisplayName>PAYMENT_TYPE</DisplayName></Field><Field Key="false" Type="String"><Name>BUCKET_HIGH</Name><DisplayName>BUCKET_HIGH</DisplayName></Field><Field Key="false" Type="String"><Name>BUCKET</Name><DisplayName>BUCKET</DisplayName></Field><Field Key="false" Type="String"><Name>ELAPSED_TIME</Name><DisplayName>ELAPSED_TIME</DisplayName></Field></Fields></PackingSpec></Field></Fields></Description></EnterpriseMessageSource>^M
</EMS>
</OracleBAMExport>

My computer will not start up. the message diplaying says 'startup test failed'. any tips??

my computer will not start up. the message diplaying says 'startup test failed'. any tips??

Hi,
Do you know which test your notebook failed? If you don't know, try the following.
Shutdown the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Color LaserJet MFP M476nw Fax Test failed

I bought a new LaserJet M476nw, but my fax test fails everytime through the laserjet setup and HP utilities software. The Laserjet is connected on a network and using Vista.
I have a dedicated fax line connected from the jack to the icon with the jack on the back of the laserjet. I can hear dial tone on the fax line when connected to a phone. I have called the fax line and it is rings normally and no answer. I also tried connecting a phone to the laserjet phone icon, while the fax line is connected to the laserJet, I can hear the dial tone from the phone.
I do not know what else I should do to get the fax test to pass, so I can start faxing on this new machine. Any suggestion is appreciated.
Mike
This question was solved.
View Solution.

Actually this problem is now solved.
It was a brand new machine, so since I really didn't have any data so I did a restore default. It rebooted and now it passes.

Pavilion G6-1203ey: Hard Disk Test FAILED, but can still boot into Windows

Hello
I have HP Pavilion G6-1203ey laptop. After installing Windows (7 ultimate, 64 bit) and some drivers on it and after several restarts, it hanged at Windows logo and I had to turn it off with power button. Then after turning it on, it gave me the option to repair problems which are preventing it from starting up, from there I let it to restore the computer to an earlier restore point and after a restart the Windows was working again. After that I decided to do a hard disk check just in case.
The Hard Disk Self Test ended up with a message: Hard Disk 1 Full (305). Then I installed HP Unified Extensible Firmware Interface (UEFI) Support Environment and did hard disk from there. I chose the comprehensive test from the options, but it finished fairly quickly (in ~1 minute) with the following output:
Testing Drive: 1
Hard Disk SMART Check : PASSED
Hard Disk Short DST : FAILED
FAILURE ID : PTTU22-5T774L-MFPV4K-60S003
PRODUCT ID : A5Q15EA#B1R
Hard Disk 1
Hard Disk Test : FAILED
A bit more background:
The previous owner told me that the original HDD was faulty which is why he replaced it with this one last year. He said that other than that there has been no problems with the laptop. The Windows is working right now and this HDD is quite new so I would not have expected any problems with it, but the results from the previously mentioned tests seem troubling. Is there a reason to worry?
Thanks
This question was solved.
View Solution.

Hi Alnuir,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I read your post and looked into the failure ID that you posted regarding the failed Short DST test. That error is indicating a hard disk failure meaning that if it hasn't failed it might soon. If everything is working I would considering backing up your data on a regular basis just to be safe. You could have a local technician take a look at the hard drive to see how close it is to full failure.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Hard disk test failed on HP Pavillion dv6-1100eo notebook

I have a HP Pavilion dv6-1100eo Entertainment Notebook PC (P/N: NR597EA) with Vista 32-bit. Unfortunately no warranty left in and general I have been very happy with this notebook.
However suddenly Wondows would not start up - and it did not even find Startup Recovery partition on the harddisk. As I wasn't sure if this Startup Recovery was on hard disk or not - I ordered System Recovery DVDs for this Scandinavian language version.
These disks did not work - so I figured I have probably not done my homework before ordering those disks.
Then I ran system Diagnostics (even if I have a old BIOS version F.03). On the diagnositics - both Quick and Full Hard disk test failed during the first 1% of the scan.
Is there anything that can be done - or is the only option new hard disk? In case - what hard disk is recommended that is not too expensive - as I don't want to invest too much into a soon 3 year old notebook.
I recently bougth an external harddisk (1 TB) based on USB connection. Can that be used bypassing internal HD. In this way I would increase HD capacity and not invest anymore into this notebook - since I already have the recovery DVDs
It is probably only a time question before I will buy a new HP notebook - that is why I don't want any long permanent fix of this problem.
This question was solved.
View Solution.

Hi,
Sorry to say, but you won't be able to install or boot Vista from the external HDD, so if you need to get the notebook working, you're going to have to replace the internal drive.
The drive on the link below is an example of one that would be fine for your notebook.
500Gb Hard Drive
The procedure to replace the Hard Drive starts on Page 57 of your Maintenance & Service Guide.
Once done, simply use your Recovery DVDs to reinstall the Operating System on the new drive.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Massive stability issues - Disk Utility repair failed, hardware test failed

Hi,
I am having massive stability issues. The installer will not install anything, programs are quitting randomly, and it is getting very annoying!
I read through a lot of posts and I have attempted to:
Repair my disk using the install cd: but that failed.
I did a Hardware test: but i had an error relating to fonts (?), couldn't see anything on the screen and I couldn't do anything.
Is there something else I could do that I haven't tried?
I have had my PB for a little over a year and have had no issues like this before. All of these issues seemed to start when I was playing a game and it suddenly just quit; I then couldn't go back into the game or re-install the game.
Help!!
12" Powerbook G4 1.5Ghz Mac OS X (10.4.6) 768 RAM

Hi, Dan.
You wrote: "Repair my disk using the install cd: but that failed."That's a big problem. You won't get very far until the problems noted by Repair Disk, the function I presume you ran based on your description, are sorted out. It's possible the hard drive has failed.
If the Apple Hardware Test failed, that's another significant problem. If it produces messages you can read that describe the failure, write them down. The machine may need to be serviced by an Apple Authorized Service Provider.
As to your next steps, first run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified to see what's up with your disk and if anything can be done to correct that.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

HP Pavilion DV7; System will not boot; Memory Test Failed using Advanced System Diagnostics

Not sure exactly how, but I managed to contracted several variants of the nasty Rovnix virus and now my system will not even boot into Safe Mode after trying to restore to several different restore points. Enabled bootlogging, but not sure how to retrieve the log.
Currently am able to get into HP Advanced Diagnostics and began Start-Up Test. Test failed on Memory Module:
Failure ID: Q0AE6C-5LS79T-MFH15G-406N03
Any next steps or directional assistance would be greatly appreciated. Thank you in advance!

Hello @GarrettBishop,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook computer has failed a memory test in the advanced system, and I would be happy to assist you in this matter!
Since the Failure ID has come up with Q0AE6C-5LS79T-MFH15G-406N03, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Apple hardware test failed

I have a 3 1/2 year old MacBook Pro 2.6 GHz. Suddenly I started getting kernel freezes....your computer need to shut down.... Sometimes I get the same message at upstart. Sometimes the screen starts blinking and them freezes with grey/green lines down the screen. The Apple hardware test failed with failure code: 4VCD/1/40000003: VideoController. I can start from the restart in hardware test.
Any suggestions out there?? Anything a non apple technician can do?

The service shop said they couldn't do the graphic card test, so they believe it isn't covered by the repair program. But they said the card is the problem, just not that problem

SQL Developer Connection Error: Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection

Hi, I'm running the following setup:
Mac OS X 10.8.4
Virtual Box 4.2.16 r86992
Oracle Developer Days (don't know the version, just downloaded it)
SQL Developer 3.2.20.09
Networking is host-only, I tried bridged but that doesn't make a difference for the problem at hand. I can ping my virtual box just fine, telnet to port 1521 looks good too:
$ ping 192.168.56.101
PING 192.168.56.101 (192.168.56.101): 56 data bytes
64 bytes from 192.168.56.101: icmp_seq=0 ttl=64 time=0.449 ms
^C
--- 192.168.56.101 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.449/0.449/0.449/0.000 ms
$ telnet 192.168.56.101 1521
Trying 192.168.56.101...
Connected to 192.168.56.101.
Escape character is '^]'.
asdf
asdf
Connection closed by foreign host.
When I create a new connection with sql developer, with the same hostname / IP (192.168.56.101), Port 1521 (didn't change that) and SID orcl, basic connection type, it can't even connect, throwing the error mentioned in the subject:
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
I have looked at various threads in the forums here but I'm still stymied why the connection seems to be ok, yet sql developer has problems with it. If I create an ssh tunnel so sql developer only has to connect to localhost it works:
ssh -L 1521:192.168.56.101:1521 -l oracle 192.168.56.101
Message was edited by: 2a2e67cd-b5b2-4229-9fa6-21f5dfe0760d

Hi Ali,
This may be of varoius reasons..
Is the database that you are connecting on the same PC?
You have specified Hostname: localhost.
If not please replace it with the IP of that server.
Else please check whether the database listener is started or not. if not please start the listener.
Check the SID by tnsping command.
Hope this will help you..
Thanks
Ashok

SQL Developer: Failure -Test failed: IO Error: Got minus one from a read ca

SQL Developer: Failure -Test failed: IO Error: Got minus one from a read call
Hi,
I am sorry I know this is probably most frequently asked question, but I have no idea what I should be searching for.
I looked up the error above to see if i could find a solution, but unfortunately I did not.
Right Let me start of with I am a Total Noob.. well it terms of having to install Oracle 11g myself.
In my University they hosted a database, and assigned us a User & pass thats how I have been using SQL Developer,
but since I am not longer a university student. I need to use Oracle Database.
So I downloaded Oracle 11g Enterprise Installed it on my laptop that i don't use much.
Name the Database: Rudu
It did all the installation, and seemed to have succeeded, I went on to the https://localhost:1158/em (Though am not sure why em? whats the deal with that? I thought it would be https://localhost:1158/Rudu) anyways....
Logged in using the System user.
Went to Users and created a user called: RUDUHR
Thought yeah its working... went on to my other laptop opened up SQL Developer.
Created Connection with the following Settings
Con Name: RK
User: RUDUHR
Pass: TEST
Con Type: Basic
Role: Default
Hostname: 192.168.0.8
Port: 1158
SID: Rudu
It don't work though Why is that??????
192.168.0.8 is laptop that has oracle 11g installed and running.
I even tried using SYSTEM user to connect, but same error
also tried changing SID to em, it made no difference I keep getting the error Status: Failure -Test failed: IO Error: Got minus one from a read call
So ya am clueless... LOL I only know how to create tables and stuff not how to configure a Database.
and just so you know I did forward the port on me router to correct laptop.

It don't work though Why is that??????
192.168.0.8 is laptop that has oracle 11g installed and running.
It is because you don't read documentation.
1158 is the default port for Enterprise Manager
1521 is the default port for Sqlnet.
Your port number is incorrect.
Needless to say, you can create your tables in EM too.
As per the Forums Etiquette post (first link when you get to this page) it is recommended you read documentation before asking Yet Another Doc Question.
Sybrand Bakker
Senior Oracle DBA

Thinkpad T410 SSD Smart Test Fail

About 2 weeks ago started getting this Windows error message
The following hard disks are reporting failure:
Disk Name: SAMSUNG MMCRE28G8MXP-0VB
Volume C:\
Ran Lenovo Solution Center Hardware scan and everything passed except the SSD, here are the results.
Result code: WHD00F001-WI3X4K
SMART status test - Failed
Targeted read test - Passed
Random seek test - Passed
Funnel seek test - Passed
Drive Info
Firmware: VBM1EL1Q
Size: 119.24GB
Partition: MBR
Any ideas? I can't find anything anywhere on this error.

Welcome to the forum!
Sounds like a failing SSD, but there have been reported one too many false positives of this nature...
Download and run HD tune to check the condition of the drive.
http://www.hdtune.com/
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Test failed BAM-00553 Error when integrating B2B with BAM

Hi,
We used the following link to integrate B2B with BAM.
Oracle Fusion Middleware User’s Guide for Oracle B2B 11g.
Monitoring Instance Message Data With Oracle BAM
http://docs.oracle.com/cd/E15586_01/integration.1111/e10229/b2b_bam.htm#CFHJIBHC
server is running on linux machine..
we got the following error when we create Enterprise Message Sources and try to start it.
Name: B2B_EMS
Owner: weblogic
Created: 1/23/2012 9:02:17 AM
Last modified: 1/25/2012 8:37:43 AM
Status: Test failed - BAM-00553: Resources start operation for destination jndi/jms/bamqueue failed.
Initial Context Factory: weblogic.jndi.WLInitialContextFactory.
JNDI Service Provider URL: t3://soahost:9001.
Topic/Queue Connection Factory Name: jms/BAMAQQueueCF.
Topic/Queue Name: jndi/jms/bamqueue.
JNDI Username: .
JNDI Password: .
JMS Message Type: TextMessage.
Durable Subscriber Name (Optional): .
Message Selector (Optional): .
Data Object Name: /Samples/B2B/B2BDO.
Operation: Insert.
Batching: No.
Transaction: No.
Start when BAM Server starts: Yes.
JMS Username (Optional): .
JMS Password (Optional): .
Please suggest with the solution, also provide with any of other sample which defines B2B and BAM Integration.
Regards
Shankar

Hi,
We used the following link to integrate B2B with BAM.
Oracle Fusion Middleware User’s Guide for Oracle B2B 11g.
Monitoring Instance Message Data With Oracle BAM
http://docs.oracle.com/cd/E15586_01/integration.1111/e10229/b2b_bam.htm#CFHJIBHC
server is running on linux machine..
we got the following error when we create Enterprise Message Sources and try to start it.
Name: B2B_EMS
Owner: weblogic
Created: 1/23/2012 9:02:17 AM
Last modified: 1/25/2012 8:37:43 AM
Status: Test failed - BAM-00553: Resources start operation for destination jndi/jms/bamqueue failed.
Initial Context Factory: weblogic.jndi.WLInitialContextFactory.
JNDI Service Provider URL: t3://soahost:9001.
Topic/Queue Connection Factory Name: jms/BAMAQQueueCF.
Topic/Queue Name: jndi/jms/bamqueue.
JNDI Username: .
JNDI Password: .
JMS Message Type: TextMessage.
Durable Subscriber Name (Optional): .
Message Selector (Optional): .
Data Object Name: /Samples/B2B/B2BDO.
Operation: Insert.
Batching: No.
Transaction: No.
Start when BAM Server starts: Yes.
JMS Username (Optional): .
JMS Password (Optional): .
Please suggest with the solution, also provide with any of other sample which defines B2B and BAM Integration.
Regards
Shankar

[WPSL]Windows App Certification Kit Test Fails, binary is built in debug mode

Hi,
Windows phone 8.1 App fails Windows App Certification Kit test (WACK Test).
It is producing below error in Debug configuration test,
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
Impact if not fixed: Windows Phone Store doesn’t allow a debug version of an app.
How to fix: Please make sure the app isn't linking to any debug versions of a framework and it is built with the release configuration
And i got a solution like,
Universal Apps (And Silverlight 8.1 Apps) have a different certification requirement. You cannot publish assemblies built in debug mode.
You'll need to contact the NuGet authors of ICSharpCode and ImageTools and have them provide you with a version built in release mode.
How to proceed with this solution. I'm very help full if any solution provided.
Thanks and Regards,
Ranjit.

Hi Franklin,
Thanks for your replay. I created my package in 'Release' mode only.
Actually my project in windows phone 7.1 and i upgraded it to windows phone 8.1. In "Release" mode i created my build, but i'm having this error in WACK(Windows
App Certification Kit) test.
I'm able to run my App in windows phone 8.1, but if i submit it to store then will be rejected definitely.
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
The WACK test fails in debug configuration test, for "Phone.Controls.dll "
it is built in debug mode.
There should be a solution like, how to convert .dll to release mode.
Please help me in this.
Thanks
Ranjit.
Hi ranjit,
>>Actually my project in windows phone 7.1 and i upgraded it to windows phone 8.1
Okay, this may be due to the upgrading process, could you tell us what the detailed version of your Visual Studio is(for example: Visual Studio 2013 Update 4)?
You may need to create a new Windows Phone 8.1 Silverlight project and try to upload it to Store, if this problem can be resolved, I think this should be related to the upgrading process, you may need to start from scratch by recreating a WP8.1 SL project.
To exclude environment facts, I would also suggest you retesting it on a new machine with the latest IDE.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Start up test failed. comupter wont start up on mini notebook

Similar Messages

Maybe you are looking for