Start up without prompting

Hello:
I turn my Z10 off and as I am looking at it, it turns itself back on.  It downloads without authorization, for example this message shows up after a reset, "this update contains files and applications specific to your region and wireless service provider." 
The page lists available wi-fi connections and offered the following 2 options: "Add" and "WPS".  I cannot "Add" because all the wi-fi networks are locked (besides, I don't want to join any wi-fi network for safety reasons).
I am stuck here and cannot move forward and use the phone for its intended purpose - to make phone calls.  
One morning I woke up, (at the time I had disconnected my home wi-fi) and the phone had downloaded 331MB of data.  How is this possible?
Why is my phone forcing me to download?  I cut off data because of security reasons and previous breach of my laptop and phones by an ex-boyfriend.  Must I absolutely download and use wi-fi?  I would prefer not to because I would like to have a very secure phone that does not dictate to me.  By the way, phone calls are dropped, there are clicks before a call is connected, lots of fuzzy noise, and this phone previously locked itself and showed an image that prompted me to plug the phone into my computer.  Why does my phone have a mind of its own?
Is my phone hacked?!?!

Hi vickers and welcome to the BlackBerry Support Community Forums!
From what you are indicating, it sounds like there was a software update available for your BlackBerry Z10. You may have started the update without realizing it and then turned off your Wi-Fi network, causing the device to download the update using your mobile network.
If you do not want to use data on your device, contact your wireless provider to have them cancel your data plan then make sure not to enable Wi-Fi.
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

  • IPod Nano 7g will jump songs randomly and start voiceover without prompting.

    This has been happening for about two days now. The iPod is fully charged and I have restored it several times. Without prompting and without pushing buttons, the iPod will start jumping to random songs, going back to the beginning of a song or podcast, and the voiceover will begin.

    In Settings > Music turn off Shake to Shuffle and Voiceover.

  • Shut Down Without Prompt

    Hello. I have a Mac Mini connected to a TV. Although I have a wireless keyboard and mouse for it, I usually use a remote, or connect via VNC. I would like to be able to shut it down by just pressing the power button,  like you can do on any PC, but instead,  when I push the button it asks me for confirmation. Is there a way to have it just do a clean shutdown without prompting me? Thanks.

    Hi Diane, follow these instructions to the letter, especially the part about leaving it in sleep mode without power for at least 5 hours:
    1) Plug in the power adapter and fully charge your PowerBook's battery until the light ring or LED on the power adapter plug changes to green and the onscreen meter in the menu bar indicates that the battery is fully charged.
    2) Allow the battery to rest in the fully charged state for at least two hours. You may use your computer during this time as long as the adapter is plugged in.
    3) Disconnect the power adapter while the computer still on and start running the computer off battery power. You may use your computer during this time. When your battery gets low, the low battery warning dialog appears on the screen.
    4) At this point, save your work. _Continue to use your computer; when the battery gets very low, the computer will automatically go to sleep._
    5) _Allow it to sleep for five hours or more._
    6) Connect the power adapter and leave it connected until the battery is fully charged again

  • Auto mounting disk drives on click without prompting root password

    I've installed Arch linux using the instructions given on the Beginner's Guide wiki.
    I want to auto mount a file system (partition) when I click on a partition from the default toolbar or from within nautilus, without prompting me to provide the root password for the system.
    I'm using 'gdm' as one of the DAEMONS entries to start the graphical environment in /etc/rc.conf
    Following the above mentioned wiki, I had deleted the '~/.xinitrc' file as it was mentioned in here.
    Now, how do I find(or regenerate) a backup copy of this above mentioned file, to add the line ''exec ck-launch-session"?
    Or, is there some other way to get the desired functionality working for me?

    As for the .xinitrc file:
    @skunktrader: This is exactly what I wanted, the '/etc/skel/' directory. Never realized that directory there. Thanks!!!
    @Mr.Elendig: Creating the file manually was too obvious. Thanks anyway!!
    As for my requirement:
    Even after placing the .xinitrc to my home directory and appending the line 'exec ck-launch-session gnome-session', I'm still being prompted for root authenication when trying to mount the partition from the desktop environment.

  • Safari goes to MacCleaner without prompting it.

    Safari goes to MacCleaner without prompting.  Is this a virus? How do I reset? Can Safari be deleted and reinstalled?  What is best way to get it to stop?

    You are welcome.
    You may want to be more careful of the sites you use for downloads. There are a number of them that have recently started loading a bunch of crappy adware into their download. So when you install the download it is installed to your Mac along with the stuff you wanted. A site to check into about download sites to boycott is http://www.thesafemac.com/boycott-cnets-download-com/

  • Java Web Start 1.6 fails to start application without Java Consol on Vista

    Hi All,
    I've faced with problem related to starting my application in IE 7 on Vista SP1 using Java Web Start (JRE 1.6.0_12 and 1.6.0_13). I suppose that issue appears after 11th update of JRE 1.6 since it works fine before.
    There were set settings to indicate initial and maximal size of the Java heap in the JNLP file.
    Application consist of 2 JAR files and they are signed with the same certificate.
    When user tried to start application there is no any activity after accepting certificate. After starting application javaw.exe just disappeared from processes list without any message or error.
    When I changed default setting in Java Control Panel to show Java Console, I noticed that the application began to start. But it's not a solution of the issue, since all customers cannot be required to turn on Java console.
    I believe this is a bug in JRE as the application starts with Java console and doesn't without it.
    When I browsed the web looking for the solution or an advice I found Release notes for 1.6.0_014 where it was said that 6u14 Java Web Start failed to launch and notifies that JARs were not signed, if an insecure Java system property was specified in a sandbox JNLP file. In spite of that 14th updated wasn't used and there was no notification I tried to start application without settings for the Java heap and it worked.
    Could someone help me with advice, since the application cannot be started with default heap size settings.
    Thanks in advance.
    Edited by: vovanst on Jul 28, 2009 8:06 AM

    Hi,
    as the 6u15 just arrived and the above mentioned bug should've been fixed (though I was unable to verify through the release notes), the error is still in there.
    We have no timestamped jars, neither ours nor the bouncy castle ones, all certs are valid, ours is self signed.
    6u13 runs, 6u14/6u15 won't.
    I followed the instructions here: http://bouncycastle.org/devmailarchive/msg10415.html to no avail.
    The bcprov.jar is wrapped in its own jnlp and referred as extension from the "main" jnlp.
    The interesting parts of the stack trace are these:
    Caused by (via getCause): java.lang.SecurityException: JCE cannot authenticate the provider BC
         at javax.crypto.Cipher.getInstance(DashoA13*..)
         at javax.crypto.Cipher.getInstance(DashoA13*..)
    Caused by (via getCause): java.util.jar.JarException: Cannot parse https://localhost:8443/deploy/bcprov.jar
         at javax.crypto.SunJCE_c.a(DashoA13*..)
         at javax.crypto.SunJCE_b.b(DashoA13*..)
         at javax.crypto.SunJCE_b.a(DashoA13*..)
         at javax.crypto.Cipher.getInstance(DashoA13*..)
         at javax.crypto.Cipher.getInstance(DashoA13*..)
    For me it seems there's a problem with resolving the url of the bcprov.jar, which would explain the lack of a delay which normally occurs when JCE verifies the signature of the bcprov provider classes. The error pops up almost instantly.
    I'm clueless what to do now. Did Sun really achieve to completely destroy JCE provider functionality in Javaws, forcing us to use an alternative implementation?
    Patric

  • How to auto-store files without prompting 'save as'. Adobe X/Adobe X Pro

    We have a database program that we have a lot of dokuments on. We have a option to print all documents on each case, and we want to "print" all these documents (word 2003) to the PDF printer and store the files on a pre-defined adress (Example: C:\Users\UserName\Documents\StoreHere\)
    We have the "Printer" set as PDF printer as standard, so every time we press print we are prompted to where we want to print the said .doc file. So how to we avoid the prompting and make a setting a standard?
    This is OK when its 1-5 files, but when we have 1000 .doc files, things gets very tiresome.
    TL;DR: Print .doc files to PDF reader which will auto store any and all .doc files as .pdf files into a pre-defined adress without prompting "save as".

    You posted in the wrong place. This is the Reader forum and the Adobe PDF printer is a part of Acrobat...
    But anyway, to do that right-click the printer and select Printing Preferences, then go to the "Adobe PDF Settings" tab and click on the Browse button next to the "Adobe PDF Output Folder" drop-down. Select the folder where you want the files to be saved and click OK.
    That should do it...

  • "...reverting changes.": I get this in VISTA 64 bit vm and always auto restart prior start complete, without let me do anything... well?

    Updates were not configured correctly. reverting changes.
    I get this in VISTA 64 bit vm and always auto restart prior start complete, without let me do anything... well?

    I pause vm --- what else can do?
    I tried apply vista updates... initially

  • Itunes opens without prompting

    itunes opens without prompting. I do not click on it it just opens

    Have you tried to disable the option "Open safe files after downloading" in Safari?

  • How do I prevent auto-login? I never EVER save passwords, yet FF logs me into gmail without prompting for login.

    I never save passwords - never have, never will. Using evil IE, Gmail works correctly in that it prompts me for ID and password for each new browser instance. Yet when I open gmail with FF, it goes straight to my inbox without prompting for ID or password. I use gmail in "always secure" mode. Cookies are enabled, of course, just did not expect my password to be saved and loaded from a cookie. How can I rectify this problem?
    == This happened ==
    Every time Firefox opened

    I have this issue too. I have never asked to be "always signed in" with gmail, yet sometimes it will sign me in automatically when I open my Firefox browser. I try clearing everything I can clear ( even though I've said NOT to save my password or sign in automatically), but it still happens. It's not even consistent - sometimes it will happen and sometimes not. This is very frustrating. I share my computer and I do not want automatic sign in anytime! >:o(

  • Report execution without prompting user id

    Hi,
    Is it possible to execute the report using Query designer/Web Application designer without prompting for User Id and password for selected queries?
    If possible, please let us know.
    Thanks in advance.

    Hi,
    This is possible with workbook and by creating a macro which has the auto logon code. Create a workbook on the query and you need to create a macro and call the function 'sapBEXgetConnection'.
    With this you can specify the user id and password to workbook and when ever workbook is refreshed the logon will be done automatically for specified user id and password and data will be retrieved.
    Hope this gives you an idea.
    Regards
    Akhan

  • My I Mac does not start properly without pressing option and apple keys ,and it freezes

    My I Mac does not start properly without pressing option and apple keys ,and it freezes

    Try any of the following:
    http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM  
    Disconnect all devices from the computer then do the following:
    Boot up from your Snow Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
    If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
    Troubleshoot the spinning beach ball/freezing & crashing 

  • How to chage Workspace Start Page without installing Reporting and Analysis

    Hi:
    any one know how to chage Workspace Start Page without installing Reporting and Analysis?
    thanks

    Not totally sure what you are asking but if you want to change the start page for users/groups have a read of - http://download.oracle.com/docs/cd/E17236_01/epm.1112/bpmui_admin/frameset.htm?assigning_default_preferences.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How  to chage Workspace Start Page without installing Reporting and Analys?

    Hi:
    any one know how to chage Workspace Start Page without installing Reporting and Analysis?
    thanks

    Not totally sure what you are asking but if you want to change the start page for users/groups have a read of - http://download.oracle.com/docs/cd/E17236_01/epm.1112/bpmui_admin/frameset.htm?assigning_default_preferences.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How do you move a track region in Garage Band to a new starting point without altering the existing length of the track?

    How do you move a track region in Garage Band to a new starting point without altering the existing length of the track? Thanks.

    What exactly are you trying to do? You can drag any region by grabbing it in the middle of the upper area with the highlighted name of the region. However, if you move it towards the end of the track, the length of the track will get longer, to accommodate the extra part of the region. DO you want to speed up the region, to shorten it or do you want to trim it? You can simply grab the right margin of the region and drag it, to make the region shorter.

Maybe you are looking for

  • Third Party Process Issue

    Hello Friends, Need Your Inputs for below issue" in third party process: SO is created with 2 line items, -->PR-->PO--> Vendor delivers only 1 item and MIRO is done for it, But During Creation of Customer invoice Both Line items are considered in the

  • Creating a backup of a hard drive continuously

    Hey, I'm thinking of getting another hard drive which would be for backing up my entire hard drive. I'm not sure whether I'd want this to backup continuously (i.e. if I downloaded a file, it would go straight to both hard drives) or backup at certain

  • How to draw a JPanel in an offscreen image

    I am still working on painting a JPanel on an offline image I found the following rules : - JPanel.setBounds shall be called - the JPanel does not redraw an offline image, on should explicitly override paint() to paint the children components - the C

  • Can i get my purchased music on a new pc?

    I've recently gotten a new computer, and want to put my purchased music on the new itunes on that new computer. is there a way to do this?

  • I need to reinstall Adobe.

    I have been having a lot of problems with my Adobe program.  I would like to reinstall it but I don't see where the original file is.  I purchased online, and don't see the link in my email receipt or in my account here.  Am I looking in the wrong pl