Start up won't go to windows 7
When I turn on my computer instead of going direct to Windows, it starts wih a picture of this hand throwing up programs! You have to hit escape then go to start windows. I spent all day yesterday running BIOs and they all passed. How do I get it to start regularly again??
Thanks
K
Hi kayda, sorry to hear that you are having issues with your computer booting straight into Windows. Are you getting any kind of error messages when you see these three screens? What is the exact model of your computer? I know it's a Pavilion but can you please tell me the exact model of Pavilion that it is please? Is it possible to take a screen shot of these three screens that you see? Please get back to me at you earliest convenience and I will be happy to assist you with your issue.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP
Similar Messages
-
Safari 4.0.3 Starts but won't display any windows properly
Since accepting the update to Safari 4.0.3 this morning, Safari starts but will not display any windows, just the main application menu bar.
Trying new window has no effect and launching a history item either has no effect or safari crashes complaining that the crash could have had something to do with
libcooliris.dylib
I therefore removed /Library/InputManagers/Cooliris but this made no difference.
History flow displays but won't launch any windows and strangely Menu>History>Home opens a window but there are no tabs nor URL nor search bar, but there is only the history bar. The window is all grey including where the page should be.
Trying to open other history items in this window changes the title, but no page contents are displayed.
I also tried reinstalling 4.0.3. from the Apple website, but this made no difference.
Have you any idea what I could try next?
ThanksDeleted all from /Library/InputManagers and problem solved.
I did have the following:
Cooliris
QuicKeysIM
Saft
DeliciousSafari
SIMBL
TabExpose
Not sure where the problem was, but did find the following in the log after running permissions fix in Disk Utility:
17/08/2009 11:09:01 Saft[275] Error loading /Library/InputManagers/QuicKeysIM/QuicKeysIM.bundle/Contents/MacOS/QuicKeysIM: dlopen(/Library/InputManagers/QuicKeysIM/QuicKeysIM.bundle/Contents/MacOS/QuicK eysIM, 265): no suitable image found. Did find:
/Library/InputManagers/QuicKeysIM/QuicKeysIM.bundle/Contents/MacOS/QuicKeysIM: GC capability mismatch
17/08/2009 11:09:01 Saft[275] Error loading /Library/InputManagers/Saft/SaftLoader.bundle/Contents/MacOS/SaftLoader: dlopen(/Library/InputManagers/Saft/SaftLoader.bundle/Contents/MacOS/SaftLoader, 265): no suitable image found. Did find:
/Library/InputManagers/Saft/SaftLoader.bundle/Contents/MacOS/SaftLoader: GC capability mismatch
17/08/2009 11:09:01 Saft[275] Error loading /Library/InputManagers/TabExpose/TabExpose.bundle/Contents/MacOS/TabExpose: dlopen(/Library/InputManagers/TabExpose/TabExpose.bundle/Contents/MacOS/TabExpo se, 265): no suitable image found. Did find:
/Library/InputManagers/TabExpose/TabExpose.bundle/Contents/MacOS/TabExpose: GC capability mismatch
17/08/2009 11:09:01 Saft[275] Error loading /Library/InputManagers/DeliciousSafari/DeliciousSafari.bundle/Contents/MacOS/De liciousSafari: dlopen(/Library/InputManagers/DeliciousSafari/DeliciousSafari.bundle/Contents/M acOS/DeliciousSafari, 265): no suitable image found. Did find:
/Library/InputManagers/DeliciousSafari/DeliciousSafari.bundle/Contents/MacOS/De liciousSafari: GC capability mismatch
17/08/2009 11:09:01 Saft[275] Error loading /Library/InputManagers/SIMBL/SIMBL.bundle/Contents/MacOS/SIMBL: dlopen(/Library/InputManagers/SIMBL/SIMBL.bundle/Contents/MacOS/SIMBL, 265): no suitable image found. Did find:
/Library/InputManagers/SIMBL/SIMBL.bundle/Contents/MacOS/SIMBL: GC capability mismatch
What does this mean and what can I do to fix it?
I'll now try to load the addins one by one to locate the problem. -
With Windows 7 Home Premium, whenever I start iTunes, I get a message that colors have been reverted to Windows Basic because iTunes won't support my Windows Aero configuration. Is there a fix for the incompatibility? I don't mind the color changes, but I'm having an external speaker problem that could be related to the incompatibility (at random times--usually several hours after start-up, my external speakers--connected via my Samsung Central Station's wireless docking station and computer-installed dongle--shut off and won't play until I restart. I've investigated other options, but iTunes may be the problem.) Thanks.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Indesign CS6 won't install on Windows 7 64bit via GPO
Good afternoon,
I created a installation of Indesign CS6 with application manager enterprise 3 to deploy to computers via the active directory.
It installs correctly without issue to Windows XP x86 machines however won't install to Windows 7 x64 machines.
When the computers starts it trys to install but fails and proceeds to the login screen. The following information is left in the Windows event log.
Has anyone else had this problem and more importantly know how to solve it?
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 13/08/2013 9:44:23 AM
Event ID: 1085
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer: WIN7TEST
Description:
Windows failed to apply the Software Installation settings. Software Installation settings might have its own log file. Please click on the "More information" link.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1085</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-08-12T23:44:23.375831000Z" />
<EventRecordID>9482</EventRecordID>
<Correlation ActivityID="{B74A3709-81F6-4B73-AA1F-9B610874B7EA}" />
<Execution ProcessID="384" ThreadID="1324" />
<Channel>System</Channel>
<Computer>WIN7TEST</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">3961</Data>
<Data Name="ProcessingMode">1</Data>
<Data Name="ProcessingTimeInMilliseconds">41590</Data>
<Data Name="ErrorCode">1603</Data>
<Data Name="ErrorDescription">Fatal error during installation. </Data>
<Data Name="DCName">\\AYR.burdekin.qld.gov.au</Data>
<Data Name="ExtensionName">Software Installation</Data>
<Data Name="ExtensionId">{c6dc5466-785a-11d2-84d0-00c04fb169f7}</Data>
</EventData>
</Event>
Log Name: System
Source: Application Management Group Policy
Date: 13/08/2013 9:44:23 AM
Event ID: 108
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: WIN7TEST
Description:
Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was : %%1603
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Management Group Policy" />
<EventID Qualifiers="0">108</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-08-12T23:44:23.000000000Z" />
<EventRecordID>9481</EventRecordID>
<Channel>System</Channel>
<Computer>WIN7TEST</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data>Software changes could not be applied. A previous log entry with details should exist.</Data>
<Data>1603</Data>
</EventData>
</Event>
Log Name: System
Source: Application Management Group Policy
Date: 13/08/2013 9:44:23 AM
Event ID: 102
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: WIN7TEST
Description:
The install of application Adobe InDesign CS6 from policy Global-Application-Adobe InDesign failed. The error was : %%1603
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Management Group Policy" />
<EventID Qualifiers="0">102</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-08-12T23:44:23.000000000Z" />
<EventRecordID>9479</EventRecordID>
<Channel>System</Channel>
<Computer>WIN7TEST</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data>Adobe InDesign CS6</Data>
<Data>Global-Application-Adobe InDesign</Data>
<Data>1603</Data>
</EventData>
</Event>Hi Abhijit,
I am able to install InDesign CS6 manually on the machines from the CD/DVD however when trying to install it via GPO or running the msi using the msi exec commands it doesn't install and leaves the above errors in the event log.
The installation was made using the same CD/DVD and the installation works on the Windows XP clients and software other than InDesign CS6 will install to the Win 7 64-bit machines via GPO.
Cheers, -
Photosmart C4680 software won't install in Windows 8.1 64 bit
Photosmart C4680 software won't install in Windows 8.1 64 bit. The installer starts, then never does anything. I see it in Task Manager consuming resources forever:
Here is the version I am trying to run:Hey!
Sorry for the drop-off from the thread, I must have missed your response, I apologize.
When it comes down to the actual installation and issues revolving around that; it is no longer an HP printer issue. It is an MSI (Microsoft Installer) issue.
For MSI support, I recommend for you to call Microsoft Technical Support at 1-800-642-7676.
Best of luck and let me know the outcome if you think of it. Have a great day!
I worked for HP. -
Boot Camp Assistant won't read my windows 7 professional installation dvd, HELP!!
Hi Guys,
For some reason Boot Camp Assistant won't read my Windows 7 Professional x64 Installation DVD? It appears in Finder, however there is only 1 readme.txt file on the disc in Finder. I had Boot Camp set up and working on my Macbook for almost a year but had to remove it and start again, so I can't understand why all of a sudden it can't seem to load any Windows DVD's? I even tried my Windows 7 Home Premium disc but again, the same message keeps popping up that I need to insert my installation disc and wait a few seconds for it to be recognised
Can someone pretty, pretty, possibly please help me out here in some way?Hi Guys,
For some reason Boot Camp Assistant won't read my Windows 7 Professional x64 Installation DVD? It appears in Finder, however there is only 1 readme.txt file on the disc in Finder. I had Boot Camp set up and working on my Macbook for almost a year but had to remove it and start again, so I can't understand why all of a sudden it can't seem to load any Windows DVD's? I even tried my Windows 7 Home Premium disc but again, the same message keeps popping up that I need to insert my installation disc and wait a few seconds for it to be recognised
Can someone pretty, pretty, possibly please help me out here in some way? -
Edge Code CC won't load, blank window
I've just downloaded Edge Code via Creative cloud, but when I open up the application the only thing I get is a blank white window titled index.html.
I cant type in it, I don't get any toolbars or menus or anything. Not even the "about Edge Code" From the "Edge Code" menu shows anything.
What can I do?
I have a 2,6 Ghz Intel Core i7 MacBook Pro Retina
16 GB RAM (1600 Mhz DDR3)
NVIDIA GeForce GT 650M 1024 MB
OS X 10.8.4I used Comodo. But I can't remember the steps I'm afraid. Sorry I couldn't be of more assistance.
/Johan
21 nov 2013 kl. 21:29 skrev David Alcala <[email protected]>:
Re: Edge Code CC won't load, blank window
created by David Alcala in Edge Code CC Preview - View the full discussion
Hi Kojoman - Can you let us know what antivirus software you were running and the exact steps to reproduce the problem?
Thanks,
David Alcala
Edge Code QE
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5863286#5863286
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5863286#5863286
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5863286#5863286. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Edge Code CC Preview at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
HP1320 won't duplex with Windows 7
I've downloaded HP Windows 7 64 bit drivers from your website and all duplexing options in preferences are checked and still printer won't duplex using Windows 7 Professional. It worked fine under Windows XP. What's the fix?
Let's set a static IP address for the printer so that the software is not chasing a changing IP:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know this, enter the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank. Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Creative Zen V Plus won't sync with Windows Media Player 11?
My Zen V Plus won't synchronize with Windows Media Player . I plug it into the USB, then an error message pops up in WMP that says "WMP has encountered a problem and needs to close" but if I just move the window aside WMP works fine. I then click 'sync" and it says "preparing to sync" but doesnt move beyond that. I have synced with WMP before, this problem has recently started occurring. I have all the firmware updates on my player, I don't know what is causing this problem.
Stricker: As our disclaimer on several different parts of this forum and the register/sign up page states:
[color="#FF0000">
"These forums are primarily intended for user interaction. Read more."
The moderators and administrator can not do technical support here, we are only here to enforce the rules (like not cursing.)
Gi'ven the problem you describe, it would seem your best bet at this point would be to contact Customer Support. I doubt there is much the users here could help you with given your problem. If email support hasn't answered, did you get the automated reply? If so, did you reply to it's You won't get an advisor till you reply to the automated email, otherwise it is assumed the automated system solved your problem.
Good luck,
DaleMessage Edited by Dale-CL on 04-6-2007 0:43 AM -
How to start a application with a login window?
hi there
does anyone have any idea on how to start an application with a login window? a login window is the first frame or window to be displayed when an application starts running. and only correct login id and password have been entered the real application will start. any sample out there? thank you.You can start a new thread by making a thread object and passing it an implementation of a runnable object. Runnable has just one method, public void run(), this is was gets executed in a second thread. perhaps the code you would use would look something like this.
<code>
// set up thread for login window
new Thread(new Runnable() {
public void run() {
// construct your login window here
// when you are done processing the
// password....
if(goodPassword) {
authorized = true; // a global variable
notifyAll(); // don't forget this
else {
System.exit(42);
}).start();
// control does not stop this code gets executed while
// the above thread is running.
// Set up main program here. This is done in the
// backround.
while(!authorized) {
synchronized(this)
{ wait(50); }
// now when the user logs in this frame pops
// up real quick.
myFrame.setVisible(true);
</code>
Hope you can figure it out.. good luck :) -
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793259]''
I installed Adobe dlm add-on and now Firefox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME! I do not want to use IE! I presume it has something to do with Adobe DLM as ever since then it is not working.I had this problem for a couple weeks as well and it was extremely frustrating considering we use firefox for all our company tasks. Here is the solution:
First of all if you have no bookmarks you want to save, then go directly to step 7. If you want to save your bookmarks first, then follow these steps.
1. Shut down the computer
2. Reboot and open firefox
3. Go to Task Manager, right click firefox.exe, and click END PROCESS TREE
4. WAIT 30 SECONDS! Then Double-click the shortcut to try and open firefox again
5.Repeat steps 3 and 4 until firefox finally opens (trust me, eventually it will)
6. Once it finally opens, backup your bookmarks,
7. Download a copy of firefox from there website
8. Uninstall from programs menu and make sure to check the box REMOVE ALL COMPONENTS
9. install the new copy and BOOM! it works
If it doesn't work, you're an idiot. If you don't want to reinstall firefox, then you're out of luck. Good Luck! -
I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes
Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.
Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari -
HP OfficeJet J6410 won't install under Windows 8
Hello to you all,
Two days ago, I bought a new notebook for my daughter. She needs it for her study. It's the HP Pavilion TouchSmart 11-e000ed.
Again, just like the situation I wrote about before in this topic over here (link: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind... the OfficeJet Printer J6410 won't install under Windows 8.
Now this is what I've done before the problem occured:
- I made a username and password for her,
- I activated Windows 8,
- I made a recovery-point,
- I took my external DVD writer, installed Office 2007 Home and Student for her (o.k, I know it's old, but it's very o.k - and legal copy -. for her study, used it myself as well and still do, and never any complaints about that one), and activated it,
After that and restarting the notebook;
- the notebeek activated USB 2.0 (it does that automatically at first use),
- installed XPS2OneNote (to use for Office OneNote 2007),
- installed SaveAsPDF&XPS,
- removed Norton Internet Security (I never use it, I use something else for that purpose, but was - and still am - planning to install that on a later moment),
- I made sure the notebook can access the server we have here at home, and made a share for her.
After that I used the OJ_AIO_J6400_Full_Win_WW_140_408.exe file (Dutch, but I'll translate the text in English).
From this point on I will describe as precisely as possible what happened
- - the program extracts some files, no problems there,
- - when the first screen appears, I pressed 'Install',
- - a bar appears, and after that another pop-up that says tha you must allow all HP processes. I pressed 'Next',
- - system is controlled, and after that one must agree with the licence agreements. I checked the box, and pressed 'Next',
- - the system is prepared for installation and - yes! - there it comes... an error message.
The error message says:
C:\users\<username of my daughter.\AppData\Local\Temp\7zS0FF0\Setup\de..
Please not that this is a different message than the one I got before, as I described in my posting before, (link again: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind...
Nonehteless, I assumed that, as before, the problem was with the C+++, just like before. That is why I made the following steps:
- I used the OJ_AIO_J6400_140_408_Scrubber program, run L4 4 times.
- I looked for the KB2565063 update, but it isn't there anymore. So, instead, I ran all updates there are until the system said that there are no updates to be found,
- After that I took the old installation disk that came with the OfficeJet J6410 printer, and (tried to) ran hpsetup.exe. It doesn't do a thing! Literally!!
- after that I tried to run the the OJ_AIO_J6400_Full_Win_WW_140_408.exe file again. No success. I got the same error as before (see above, the ..\7zS0FF0\Setup\de.. thing again.
So, what to do now?
Anyone got some helpfull tips for me? I would really appreciate your feedback / help.
Thank you in advance,Hi again,
No, it didn't work. And, the solution you offered neither.
This is what I've done.
After downloading the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file, I tried to install it.
It failed. I got an error message similar to the one before.
'C:\users\<username of my daughter.\AppData\Local\Temp\7zS57DB\Setup\de.'
I tried to ran the scrubber again, and the CCCUninstaller and tried again.
Same error message occured.
After that I tried to look for the KB2565063 file again. Found it this time and ran the vcredist_x64 file.
I rebooted the system, tried to run the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file again.
Same error message ocuured.
So, after that, I followed the steps you proposed.
Step 2 - searching for hpoins*.dat --> no results found.
Step 3 - searching for hpwins*.dat --> no results found.
Step 4 - I ran the Run Dialog box and typed MSIEXEC /REGSERVER (with AND without the extra space between ('MSIEXEC /REGSERVER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /REGSERVER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /REGSERVER. Check if you typed the name correctly and try again'.
Step 5 - I ran the Run Dialog box and typed MSIEXEC /UNREGISTER (with AND without the extra space between ('MSIEXEC /UNREGISTER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /UNREGISTER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /UNREGISTER. Check if you typed the name correctly and try again'.
So... conclusion: NOTHING worked.
My ideas for a possible solution didn't work, and neither did your ideas for a possible solution.
Reason why I want it to work is because of the HP Solution Center. If I can not install it with the software from the original installation disk, or the software that one can download from the HP site (the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file that is), than I have no HP Solution Center. That would be a pity, for I am sure my daughter would really love the use and ease of the program, and would really use it a lot for her study.
What's next? What else can I try to solve the problem?
Got any more idea's or helpful hints?
Thanks in advance, -
After starting Creative Cloud just a white Window appears, no Apps or something else Windows 8.1, more uninstallation and re-install didn't bring a solution. I have had installed Photoshop CC Trial Version, but had to re-boot the system, so I lost the Software. After re-installing the Creative Cloud Desktop appeared just a White window. I tried to delete the file of OOBD in AppData but no reaction. It still appears as a clear window.
See if the following helps:
https://forums.adobe.com/thread/1249756
Maybe you are looking for
-
I can't remember my Apple ID password or my security question answers. When I try to reset my password it wants to send it to my e-mail address but I can't get the e-mail because I don't know my security answers or the password. How do I reset passwo
-
WEBIs based on SQL univers don't work anymore in BI 4.1 SP2
Hello, Since we've upgraded in BI 4.1 SP2 patch4, we can't use anymore WEBI based on SQL univers (see messages below). Same problem with patch 6. But it works with Rich Client. Do you have a solution ? Thanks in advance Regards, Nicolas
-
Help, I have forgotten my Skype sign in details.
I've forgotten my Skype sign in details can you help? This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the po
-
After installing Yosemite, all office for mac 2011 apps crash after opening
Using 2013 MBP, installed Yosemite Friday and when opening Word, Excel, Powerpoint, & Outlook, they open for 5 seconds and then error out and crash. Any ideas? Thanks
-
WebDynpro Mobile - Table not rendered with PIE Client
Hello experts, I want to create a WebDynpro Mobile application. In this application I have a table which is bound to three Context Attributes with the type String. In a standard browser, that table is displayed correctly. But when I am using the PIE