Started to papc freezes cannot eject windos discrtition drive for windows  now

I startedgot  to partition my mac for windows installation used the step by step  got as far as where I would store windows there was no available place or could not go there due to format but my windows disc is now stuck in pc and wont boot

Power down & hold the Mouse button down while booting up to eject the Disc, hold Option or alt key at same time to bring up your boot choices.

Similar Messages

  • Standard Mac users cannot eject Flash installer drive image

    We recently distributed Flash to 130 macs and it defaulted for auto update. Whenever it auto updates, it mounts a flash player drive image to the desktop. Unfortunately all the users are standard users and they cannot eject the mounted drive image without an administrator logon. I have wasted hours logging into each computer to manually eject these drives. How can I reverse this behavior?
    We are using apple remote desktop

    Hello,
    Since your users do not have Admin rights to install software, you'll want to disable auto-updates on each machine.  The update settings are stored in the /Library/Application Support/mms.cfg file.  You'll want to make sure the AutoUpdateDisable and SilentAutoUpdateEnable settings are configured as follows:
    AutoUpdateDisable=1
    SilentAutoUpdateEnable=0
    This will disable ALL updates for these machines, as such, you'll want to distribute updates via some other mechanism to ensure your users have the latest secure versions when they're released.
    Enterprise deployment information is documented in the Adobe Flash Player Administration Guide for Flash Player | Adobe Developer Connection.
    Maria

  • Cannot load a FAx driver for a Hp Laserjet 1536dnf MFP on a HP Pavilion Elite e9220y Computer

    I cannot find a fax driver for this printer to install on my computer. 
    I have uninstalled and reinstalled the printer a couple of times It will print and scan but not fax.
    I reinstalled fron the orignal disk and off the HP website neither get me fax capablilites.
    I have gone to support and cannot find the drive on eith er the printer or computers web page at HP.Com
    Please let me know what to do.

    Hi @thesaneone4 ,
    I see that you are experiencing issues with the fax driver not installing. I would be happy to help you.
    Check the connections in the Device Manager for any printer entries, under Universal Serial Bus Controllers look for Fax LEDM or any unknown devices. Right click and try to update the driver. How do I get into Windows Device Manager?
    In the Devices and Printers window, what icons do you have for the printer showing?
    If you are still having issues, you will need to uninstall the printer software from the CD and unlock the hidden Admin Account when installing the printer software, to make sure there isn't any interference.
    Disconnect the USB cable.
    Uninstall the software by going to Start, Computer, right click on the CD and open it, then double click on uninstall.
    Then download and run the latest software. HP LaserJet Pro M1536dnf Multifunction Printer.
    Unlock Hidden Administrator Account and install the printer on this account:
    Go to your Start menu and under the 'search programs and files' box type CMD.
    CMD will populate as a search option above, just right click on it and 'run as administrator'.
    Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter.
    Next, close CMD and restart your computer.
    When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it.
    If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked.
    Under the Administrator account, install the printer software.
    Test the printer.
     To turn off the Admin account start back at step 1 and type in net user administrator /active:no.
    Please let me know the outcome.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HT1461 I have installed the Windows 8 on my MacBook using BootCamp, but I cannot install drivers for Windows now

    I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.

    Go back to Boot Camp: on the 2nd page you get this:
    Download the support software and as Windows is already installed uncheck the 2nd box.

  • I cannot connect to an update for windows for adobe premiere elements 9 ar to change my sign-in. it gives me an error message 400 saying photo shop is unavailable. this makes the second day.

    I cannot connect to an update for windows for adobe premiere elements 9 ar to change my sign-in. it gives me an error message 400 saying photo shop is unavailable. this makes the second day.

    This is a user to user forum, not Adobe support
    Select a topic, then click I STILL NEED HELP to start Premiere Elements Online chat
    -http://helpx.adobe.com/contact.html?step=PRE

  • Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

    I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver  I have the message that it is already up to date.
    I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

    Hi juigarashi,
    Microsofts automated troubleshooting service on the link below may help
    CD/DVD Repair
    Hope it works for you.
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Cannot Install Graphics Driver for windows 7 64 bit...

    Hi... I cannot find a suitable amd driver setup file for my windows 7 64 bit machine of HP.. Can anyone help??!!

    Hi:
    Please see my reply to your other post at the link below...
    http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Cannot-Install-Graphics-Driver-for-windows-7...

  • Cannot get Boot Camp drivers (for Windows XP) installed

    I've partitioned my Time Machine HD for the 32GB/FAT format of Windows XP/Home Edition w/SP2. The installation of Windows proceeded OK. However, after installing Windows, ejecting the W-Install disc, and inserting my MAC OS X Leopard disc, the "setup.exe" file does not open. If I start up in Windows, I cannot open the Opt. Disc drawer since the BC drivers are not installed; if I insert the OS X disc in the drawer, then restart in Windows, the "setup.exe." file does not open.
    Where do I go from here to install the Boot Camp drivers for Windows? These drivers are needed for 'normal' Windows operation, and are required in order to install the Boot Camp update. Any suggestions would be appreciated.

    Hi David,
    while you are in Windows and have the Leopard DVD inserted, can you access the content of it using the Windows Explorer ?
    or maybe this hint on MacOSXHints can help you access the Windows Content of your Leopard DVD while in OSX http://www.macosxhints.com/article.php?story=20080708145453136
    If so, you can try to copy the Windows Content onto a USB Memory Stick and use it to install the drivers.
    Good Luck
    Stefan

  • Cannot Partition 3TB Internal Drive for Bootcamp

    I have read a number of threads and tried a number of things from various websites to get my iMac to use Bootcamp, but no luck. It was so easy with my MacBook Pro. :^/
    The basic problem is that when I start with a single, internal 3TB drive with a brand, new clean install of Yosemite, I get the message:
    The startup disk cannot be partitioned or restored to a single partition.
    The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.
    To get past this I go into Disk Utility and resize the partition from 3TB to 2TB. This allows me to get past this screen and have Boot Camp partition the drive. Note that it shows the drive as 2TB and I divide it equally with 1TB for Mac and 1TB for Windows.
    In the Windows installer the first thing you notice is that there are five partitions, and that the Windows partition is 1.8 TB, it having grabbed the empty space for itself. It complains that it cannot use the partition as it uses the GPT Partition Style, so I click the Format option to have it format as NTFS. But it still complains that it cannot use the partition because of its style.
    Going back into the Mac OS and using Disk Utility, I try and reformat the partition to ExFAT and it starts to, but fails indicating that it is not supported for Core Storage.
    I have been through this cycle several times now. I thought the issue previously was because of an older version of OS X. I then upgraded and found the same issue. So in order to change the partition style I finally wiped the drive using Disk Utility from a bootable USB and reinstalled Yosemite cleanly.
    If I missed a step or option somewhere I am willing to wipe the drive again. I just need to know what to change. Here is the current state of my drive:
    > diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *3.0 TB     disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Internal                1.0 TB     disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:          Apple_CoreStorage                         2.0 TB     disk0s4
       5:                 Apple_Boot Boot OS X               134.2 MB   disk0s5
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *7.8 GB     disk1
       1:                 DOS_FAT_32 WININSTALL              7.8 GB     disk1s1
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                            GSP1RMCPRXFRER_EN_DVD  *3.3 GB     disk2
    > sudo gpt -vv -r show /dev/disk0
    gpt show: /dev/disk0: mediasize=3000592982016; sectorsize=512; blocks=5860533168
    gpt show: /dev/disk0: PMBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 5860533167
           start        size  index  contents
               0           1         PMBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  1954418960      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      1954828600     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      1956098136        1960        
      1956100096  3904170888      4  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      5860270984      262144      5  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      5860533128           7        
      5860533135          32         Sec GPT table
      5860533167           1         Sec GPT header
    >
    sudo fdisk /dev/disk0
    Disk: /dev/disk0 geometry: 97451/255/63 [1565565872 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 - 4294967294] <Unknown ID>
    2: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    4: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    Any help that can be offered would be greatly appreciated. Thanks in advance.
    Dale

    This is an example if the partitions are
    GPT1 = MBR1 = EFI
    GPT2 = MBR2 = OSX
    GPT3 = MBR3 = Recovery HD
    GPT4 = MBR4 = BOOTCAMP.
    You will need to pick the correct order based on how you format the 3TB disk. Any GPT entry beyond the 2TB address will not be a part of the MBR.
    Rebuild MBR to match the new GPT information thus resetting the Hybrid MBR. Use defaults for other questions (like partition codes). The only values that need modifications are the Boot flags and step 6. Accept all other defaults that Gdisk offers.
    Sudo gdisk /dev/disk0
    P  (Print list of parts)
    R   (Recover)
    H (chooses Hybrid)
    Partitions numbers to be hybridized: 2 3 4
    Y (Good for GRUB question)
    N (part 2 boot flag)
    N (part 3 boot flag)
    Y  (part 4 boot flag make NTFS bootable partition)
    W  (Write the new MBR)
    Y    (Yes! write the new MBR)
    Reboot
    Here is an example of the Q&A (when using partitions 2 3 4) ...
    Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): Y
    Creating entry for GPT partition #2 (MBR partition #2)
    Enter an MBR hex code (default AF): Press Enter/Return
    Set the bootable flag? (Y/N): N
    Creating entry for GPT partition #3 (MBR partition #3)
    Enter an MBR hex code (default AB): Press Enter/Return
    Set the bootable flag? (Y/N): N
    Creating entry for GPT partition #4 (MBR partition #4)
    Enter an MBR hex code (default 07): 07
    Set the bootable flag? (Y/N): Y

  • Re: Cannot find a Mouse Driver for my P300-156 which is now running Windows 7

    Hi,
    I have just recently upgraded my Satellite P300-156 Laptop from Vista to Windows 7 32bit (I am not particularly computer literate and had no idea that this wonderful new operating system might not run properly on modern laptops).
    Have had a nightmare, as when starting the computer the screen is oversized and the mouse and keyboard don't work. It is a bit intermittent - occasionally it does work. I have had long conversations and numerous scans done by Microsoft and it now appears that the problem is the drivers are not loading up correctly. When we looked at the Device Manager we could see little yellow Exclamation marks (bangs as he called them) bext to the Display Drivers and the Mouse and Other Pointing Device Drivers.
    My Windows engineer had a look on this website and could not locate a driver for the Mouse and Other Pointing Devices. Does anybody know if there is one out there? I cannot believe I may not be able to utilise Windows 7 on this laptop and may have to go back to the agony of using Vista. It seems crazy.
    Hope somebody may be able to help.
    Many thanks.

    Hi Deborah23,
    As far as I know Satellite P300-156 belongs to PSPC4E series. So I have checked official Toshiba website and I cant find Windows 7 32bit drivers. Now you have to options:
    1.You try Vista 32bit drivers as Jeka wrote. From my own experience I can say that the most Vista drivers also work on Windows 7 so its worth a try!!!
    2.You try Windows 7 32bit drivers from other P300 models. That means if you search without model number, you can find all Windows 7 32bit drivers. Maybe they work on your model too because the most P300 models are similar:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Notebook > Satellite > Satellite P Series > Satellite P300 > Windows 7 32bit

  • Cannot (re-)install itunes (64) for windows 8. get error 7 (Windows error 193)

    I've used itunes for itunes for quite some time before making some hardware change (cpu and motherboard).  The OS, like before, is Windows 8. But now each time that I try it seems to install up to and including the final "finish" in the process.  After that it gives me the above msg suggestint that I rinstall.  After a START of the computer there are complains about "apple" routines that cause problems.
    I hope that there is an itunes user who n help.
    Zeeghee (Siegfried Schulte, [email protected])

    Hello Zeeghee,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/ts3074
    Best of luck,
    Mario

  • Cannot establish connection - JDBC driver for MS SQL server 2000

    Hi,
    We are facing problems in connecting to SQL server 2000.
    We have installed the latest version of the driver from followin link and following
    https://websmp108.sap-ag.de/msplatforms    > SQL Server > JDBC Driver for MS SQL Server (Version 3.70.10)
    We have given the following entries in our communication channel:
    JDBC Driver : com.microsoft.sqlserver.jdbc.SQLServerDriver
    Connection:  jdbc:sqlserver://<SQLserver IP>:1433;databaseName=production_info
    Please let us know the procedure to find if the JDBC driver for SQL 2000 is installed from our SAP XI.
    ERROR DETAILS:
    Error during database connection to the database URL 'jdbc:sqlserver://<SQLserverIP>:1433;databaseName=production_info' using the JDBC driver 'com.microsoft.sqlserver.jdbc.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://<SQLserverIP>:1433;databaseName=production_info': SAPClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver'
    Please help.
    Regards,
    Rehan

    Hi Chris,
    We have used the same because we have downloaded the driver from following location
    https://websmp108.sap-ag.de/msplatforms ;   > SQL Server > JDBC Driver for MS SQL Server (Version 3.70.10)
    I have tried with both "com.microsoft.jdbc.sqlserver.SQLServerDriver"; and "com.microsoft.sqlserver.jdbc.SQLServerDriver";, but still I am facing the same error.
    Service market place has given the driver as "JDBC Driver for MS SQL Server (Version 3.70.10)", is there a way to find out if it is for 2000 or 2005?
    Thanks for your reply.
    Regards,
    Rehan

  • Cannot see Inetnet explorer 8 for windows xp

    hi all,
    In wsus, I cannot see windows internet explorer 8 for windows XP". I cannot see options update rollups in the left side of wsus.
    synchronizing is working fine.
    this is WSUS 2012 server. I also cannot see in windows update catalog also. so I cannot import.
    what can be the reason.
    thank you in advance.
    --parkar
    UAE

    Is it in Declined status?
    It is KB944036, and it *used* to be visible, but maybe it has been archived (WinXP is about to reach EOL...)
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/bbe32955-3f0d-44d0-b98f-ab1159d3eb5a/deploying-ie8-as-a-software-update-using-sccmwsus?forum=configmgrsum
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Cannot download the Bluetooth Driver for the IdeaPad S10

    I am building a new Windows XP Pro image for our S10s and I cannot download the Bluetooth Driver from http://consumersupport.lenovo.com/lenovo/Drivers/list.aspx?CategoryID=924
    I have been trying for four days, and used both Firefox and IE. It gets about halfway through, then says "The Source File Cannot Be Read"
    Can they re-upload the Bluetooth Driver?
    Thanks!
    ThinkPad T61 15 Widescreen with nVidia Quadro graphics 6459CTO
    Windows 7 Enterprise and Windows XP Pro

    hey mbhockey13, maybe you can refer to my page http://forums.lenovo.com/lnv/board/message?board.id=ideaPad&thread.id=4483 to solve your bluetooth driver problem, thanks for crash74 that already solve my problem
    blackpepper 
    with
    black lenovo s10
    2 gb mushkin 
    black razer pro click mobile

  • Cannot get HttpClient to work for Windows Phone 8.1

    I am new to development and trying to create a basic Windows Phone App that uses HttpClient with no success. I keep getting an unhandled exception. I get the same error whether using my own code or the downloadable sample RSS Reader:
    'RSSreader.exe' (CoreCLR: DefaultDomain): Loaded 'C:\windows\system32\mscorlib.ni.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\Data\SharedData\PhoneTools\AppxLayouts\a8b3abf4-4e2b-49c8-ac1e-14aadef54813VS.Debug_AnyCPU.Steven\RSSreader.exe'. Symbols loaded.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.RUNTIME.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\WinMetadata\Windows.winmd'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.RUNTIME.INTEROPSERVICES.WINDOWSRUNTIME.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.DIAGNOSTICS.DEBUG.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.COLLECTIONS.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.THREADING.TASKS.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\System.Runtime.WindowsRuntime.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.XML.XDOCUMENT.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.XML.LINQ.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\SYSTEM.XML.NI.DLL'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\en-US\mscorlib.debug.resources.dll'. Module was built without symbols.
    A first chance exception of type 'System.Exception' occurred in mscorlib.ni.dll
    'RSSreader.exe' (CoreCLR: .): Loaded 'C:\windows\system32\en-US\System.Xml.debug.resources.DLL'. Module was built without symbols.
    A first chance exception of type 'System.Xml.XmlException' occurred in SYSTEM.XML.NI.DLL
    The program '[2432] RSSreader.exe' has exited with code 0 (0x0).
    I am not sure what I am missing. I have searched but cannot seem to find the root cause of my issue. Any assistance would be greatly appreciated.

    A first chance exception of type 'System.Xml.XmlException' occurred in SYSTEM.XML.NI.DLL
    That line is your culprit. Whichever method is calling your code to parse the XML from the feed, wrap it in a try/catch.
    In your catch, do a System.Diagnostics.Debug.WriteLine(e.Message);
    If you're running this from the emulator, check whether your emulator has internet connectivity. If you're running from your phone, check the same.
    If all else fails, you can try adding the HttpClient NuGet libraries to your project (This MAY fix the issue if it's not already loaded)

Maybe you are looking for