Started using my Time Capsule as a base station; now Time Machine won't work

Dear community,
I had been using my Time Capsule just for Time Machine backups, but I recently switched to using it as an internet base station as well. Now I can connect to internet via Wi-Fi, but Time Machine no longer works (it throws a "backup disk cannot be found" error). I assume this is related to the fact that the name of my Wi-Fi network differs from the name that my Time Machine used to have back when it was only my backup disk. Does anyone have any ideas for how to get Time Machine working again, hopefully without losing all my backup history? Thanks for your help.
I am using a Time Capsule (circa 2012) and a late-2011 MacBook Pro with OS X 10.9.3.

This is just typical Mavericks behaviour.
You must find the hard disk for it. Poor Mavericks cannot find its own tail let alone a network device as complex as a hard disk.
Does anyone have any ideas for how to get Time Machine working again, hopefully without losing all my backup history?
Let me say, that killing your backups is harder than simple resets or changing functions. In fact the only way to wreck the backups is erase them deliberately from airport utility, or have TM working over a faulty link and corrupt them.
The issue is simply that the hard disk is lost. And Bo Peep doesn't know where to find it.
Step in and mount the hard disk manually.
In Finder.. use Go, Connect to server.
Type in AFP://TCname.local
Where TCname is the actual network name of the TC. (Hopefully you are now using short names with no spaces and pure alphanumeric.. in which case network name = name. If not then you need to translate the name to the network name.
So Fred Blog's Airport Time Capsule which you name it in the utility comes out.
fred_blogs_airport_time_capsule as network name. Spaces and apostrophe are illegal.
Let me encourage you to go back to the airport utility and rename the TC something sensible like TCgen4 (it is a gen4) and use TCwifi for the wireless name. Then the network name is at least something like the actual name.
So in my case I would type in AFP://TCgen4.local
Local is the default domain and using it can also help.
The caps are irrelevant.
The other and better way of doing it in Mavericks is use IP address of the TC if it is static. ie if the TC is main router it will have IP 10.0.1.1 by default.
Then you type AFP://10.0.1.1
You will be asked for the password.. type that in and keep it in your keychain.
(BTW you can discover the actual names of everything via the netstat scan from network utilities. In Mavericks Network Utilities has gone walkabout, so you will need to search for it in finder). You should see the actual network names of everything listed here. Along with MAC address and other info.
Now you can reset TM and point it at the TC disk which is already open in finder.
See info on TM reset here.
A4 http://pondini.org/TM/Troubleshooting.html
Please note when TM starts up it will show it is going to do a full backup.. this will not happen. It will discover the existing backup and then simply do incremental. (I hope!!) Nowadays with Mavericks nothing can be certain.
Good Luck.. !
Sorry I have made it over complicated.. Early morning here and not suitably caffeinated yet.
If you run into trouble post back.

Similar Messages

Time Capsule as Wireless Base Station...

I'll start with my current network map to give you the logistics - then ask my question. I think that might be easier!
My Time Capsule is currently connected to my ISP modem. Wireless capabilities are turned off. I then have an Asus router hardlined into the Time Capsule. It's in Access Point mode - and wireless is on. This setup works great for my purposes.
So now I'm wondering if I can turn the Time Capsule wireless on, and give it the same SSID as the Asus AP. Is it possible that it will also serve as a wireless AP itself? If so, is it as simple as creating a wireless network with the same settings as the Asus AP?
Thank you!

So now I'm wondering if I can turn the Time Capsule wireless on, and give it the same SSID as the Asus AP.
Yes, but in addition to giving the Time Capsule the same SSID as the Asus access point, you also need to give it the exact same setting for wireless security and same wireless network password.
Is it possible that it will also serve as a wireless AP itself?
Yes
If so, is it as simple as creating a wireless network with the same settings as the Asus AP?
Same SSID, same setting for wireless security, same wireless network password. Use the Automatic setting for Wireless Channels, or if you set channels manually, set each access point at least 3-4 channels away from the nearest other access point.
If the Time Capsule is in Bridge Mode now, keep it that way. If it is acting as the main router for the network, keep it that way as well.
With this type of setup, you will have what is known as a roaming network. Computers will automatically switch to the access point with the best signal quality as they "roam" from area to area.

I BEG of you: How do I replace an Airport Extreme base station with a 4th-generation Time Capsule as the base station?

I'll be damned if I can figure this out. I have a new late-2012 iMac (OS 10.8.3) connecting to my LAN via Airport wi-fi. (It will be Ethernet-connected, as soon as a hole is drilled into my new work table, but right now the Ethernet cable doesn't reach.) My wife uses a 2011 MacBook Air.
The LAN consists of a flying-saucer-looking Airport Extreme connected by Ethernet to the modem, plus 2 old Airport Expresses. I have an Ethernet switch too, through which I've got a TV connected and a printer connected.
I bought a 4th-generation Time Capsule about a year ago, but couldn't figure out for the life of me how to replace the Airport Extreme with it. I became so incredibly frustrated that I hid it away in a closet until now. I just tried again, with the same results. I've got both Airport Utility 5.6 (to use with the old Extreme and Expresses) and Airport Utility 6.2. I was using version 6.2 to set up the Time Capsule... or to try to. Once again, I cannot for the life of me figure out how to do it! I tried so many different Ethernet wiring connections that I now cannot remember them well enough to describe them here.
I distinctly remember that, when I tried this a year ago with my wife's MacBook Air and Airport Utility 6.2, I was presented at one point with the question whether I wanted to replace an existing base station with the Time Capsule I was trying to set up, but this time I never was presented with that option.
Is there anyone who can, in essence, hold my hand and walk me through this process step-by-step? At this point I even need to be instructed what to wire to what. I feel like a total incompetent.
My MOST sincere thanks in advance for help!
(I hope Time Capsule is the correct forum for this question. I considered the Airport forum as well, but I don't want to cross-post.)
(And, just to complicate matters, after I get this done-- assuming I ever do-- I want to use the old Airport Extreme on the outside of the house to extend the range of my LAN to the back yard... but that's for another day entirely.)

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Am I right in thinking that you can't extend your network wirelessly with a time capsule unless your base station is an apple one?

My new time capsule will only allow me to extend my network via ethernet cable.
What I really want to do is use it wirelessly as an extension wirelessly.
The option is there (under other options in airport utility) but when I select it and move on it reverts back to create a new network.
Why is this?
Am I trying to achieve the impossible?
I have an airport express and that be added to my network wirelessly with no issue at all.
Please help
Russell

Can I just "join" the network with my time capsule like I have with my airport express?
Apple does not present this option....but, even if they did.....this would be the worst possible option to use for backups.
Can I use my airport express as a base (connected via Ethernet to the router) for my time capsule to extend from wirelessly?
Yes, you can. The AirPort Express would be configured to "create a wireless network"......then.....the Time Capsule could be configured to "extend a wireless network".
It is critically important that the Time Capsule be located where it can receive a very strong wireless signal from the AirPort Express in this type of setup. The more that you have line-of-sight between the AirPort Express and Time Capsule, the better your network performance will be and the faster that backups will occur to the Time Capsule.
A better option in terms of performance would be to connect the Time Capsule to your current modem/router using an Ethernet connection and have the Time Capsule "create" the network. Then, use the Express to "extend" the network.
Here, I am assuming that you have a new Time Capsule.

Time Capsule and AirPort Base Station (802.11n) Firmware 7.3.2 and the Apple support website link isn't working. Does anyone have it?

Hi,
I have a Win7 Premium and a Time Capsule bought around 2009. I'm using airport utility 5.5.3 and the TC has the 7.6.1 firmware. I can both wirelessly and using the ethernet cabl connect to the network but not to the hard drive (I get the netbios error lthough netbios is enabled). I have pretty much tried ALL the solutions that have worked for many people... too many to mention... the only thing that many people have claimed worked for the (albeit the posts are a bit old) is to revert to the 7.3.2 firmware which I cannot find.
http://www.apple.com/support/?artnum=305301 brings me to the default support page for apple products, so no joy there. this is causing my hair to go prematurely gray.
I am willing to try almost any solution you guys may suggest, but in addition: does anyone know where the 7.3.2 firmware can be found?
I don't need a book corner as I read most books in e-format...
thanks in advance.

Model# A1302
When I do the "firmware update" I have no options except:
other
as a former IT, I have exhausted all options I think except for rolling back the firmware.
The apple site isn't down but the page: http://www.apple.com/support/?artnum=305301
which has the link for the 7.3.2 firmware takes me to the default support page.
On another note (for anyone who has run into this problem and recognizes the symptom), when I submit the password on the apple popup that says "network disc detected, enter password" the pop up pauses for a good minute (not responding) before the #53 error with the netbios comes on. I have also turned off the McAfee firewall and tested it... no joy.
Thanks for your help in advance

Time Capsule / AirPort Extreme Base Station Firmware Update 7.5.1 download?

Hi, I went to this page (link below) hoping to find the firmware download link but can't find it. All I see is the software update. I need the firmware update 7.5.1 for Airport extreme. Can someone send me the correct link?
Thanks,
Mike
http://support.apple.com/kb/DL965

Hi Mike,
according to the page you linked, this firmware update is only applicable *"for late 2009 AirPort Extreme and Time Capsule"*
There seems to be no direct download link. Maybe to avoid confusion.
Do you have one of those ?
If not this won't work.
If yes, then use these instructions http://support.apple.com/kb/HT1218 to update using the Airport Utility (which you should update to 5.51 before).
Hope it helps
Stefan
Message was edited by: Fortuny

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Since latest update to airport extreme im getting 10 unknown base station and time capsule items showing in airport utility as a network. when able to "forget" them they initially drop off but soon return. how do i get them deleted and stay that way

since latest update to airport extreme im getting 10 unknown base stations and time caps showing up as though they are a part of my network. sometimes i can "forget" them and they will disappear initially but soon return. i need and want only my connection inside my home . any ideas. i have done a factory reset and set up a new network but they continue to show up.

I'm not convinced that the problem lies in Airport Utility. This same thing was happening to me, nearly exactly as you describe it. The thing is that with me, the problems clearly started when I updated the firmware in my Airport Express (n). That's when all the wacky stuff started happening. Sometimes it would show up in AU, sometimes it didn't and even if it didn't, I could still access the internet through it.
But as you said, the problems got really bad when another Express (b/g) was put on the network with it. Even when it did work, the (b/g) would make it impossibly slow.
You know more about this than me, and clearly have more patience if you've restarted the network fifty times. I gave up at about ten.
In any case, your solution is more of a work around and if you're still having that slow connection problem, I'm not sure you've got it. But thanks for your reporting of this. At least I know I'm not crazy.

Can I use Time Capsule and LaCie at the same time?

Can I use Time Capsule and LaCie at the same time?

stephaniefromarlington wrote:
Before I answer your questions, let me first just say thank you so much for your amazing patience and helpfulness. Whether or not we get to the bottom of this, I am very, very grateful to you.
We will get to the bottom of it, and you're quite welcome. Don't feel you ought to know all this stuff -- none of us were born with it!
By the way, in answer to your original question, yes, you can use the Time Capsule while backups are running. There's no conflict at all.
1) Estimated size of full backup: 205.94 GB
2) My LaCie has available: 11.04 GB of 359.95 GB
That's part of the problem right there; 360 GB is a bit small to back up 206 GB. Ordinarily, a Time Machine drive should be 2-3 times the size of the data it's backing-up, so Time Machine can keep a reasonable "depth" of old backups for you.
It looks like Time Machine is trying to do a fairly large backup, and there just isn't enough room for it.
But something doesn't quite add up. Time Machine should have deleted all but your most recent backup, trying to make room for the new one. But that would mean there should only be a bit less than 206 GB on the disk, not 360.
A clue may be lurking in your logs. Use the widget in #1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.

Lost connection to one of my Airport express units. Serial number 44500WQV0. Message in Airport Utility is to use Version 5.6 to configure base station. I have version 6.3.1. Both airport express units bought at same time few years ago.

Hello all.
Lost my connection to one of two airport express units. Both purchased few years ago. Use them to stream music to house speakers via WiFi. I have v6.3.1 of Airport Utility. Message says to use v5.6 to reconfigure this base station.
How do I do that, please?
Mahesh

You can use the following workaround to install AirPort Utility 5.6 on a Lion or Mountain Lion Mac:
Be sure to read the caveats at the end.
Lion / Mountain Lion's package installer will refuse to install superseded versions of AirPort Utility. Instead you will need to use a package extractor such as Pacifist or unpkg. Pacifist is shareware, unpkg is free.
Download Pacifist here: http://www.charlessoft.com/
Download unpkg here: http://www.timdoug.com/unpkg/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
Open Pacifist and from its File menu, navigate to the package and open it.
Click the "reveal triangles" until you see AirPort Utility 5.6.app:
Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
The most recent version of AirPort Utility included with Mountain Lion should be used to configure 802.11n - capable AirPort Base Stations. Make no attempt to delete it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist. Use the older version only as necessary for older AirPort Base Stations that cannot be administered any other way.
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
Keep in mind that Apple's decision to abandon support for the original AirPort Express and AEBS was for reasons known only to them. Remember that you are using obsolete equipment, should some future OS X feature not work for you.

Airport Time Capsule stop send wireless signal, Airport Time Capsule stop send wireless signal

After instaling several times, alway after a while the wireless router stop sending the signal, or does not start up like in the morning, especially from a windown computer.
Out house have several computers in Windows and Mac, iphones and ipads and itouch mac book pro,
How come the router will not start up after a "night of rest"

Unfortunately, a solid amber is light is not a good sign.
Try a complete Factory Default Reset on the Time Capsule using the steps below. This procedure will not affect any of the data that you have stored on the internal hard drive.
Power off the Time Capsule for 15-20 minutes or longer
Hold in the reset button on the back of the Time Capsule first, and keep holding for an additional 9-10 seconds while you simultaneously plug the power back in to the Time Capsule
Release the reset button after the 9-10 hold period and allow a full minute for the Time Capsule to restart
The Time Capsule light should normally stay solid amber for about 30 seconds and then change to a slow, blinking amber light, indicating that the Time Capsule has been reset and it can now be reconfigured.
If you try the Factory Default Reset a few times and the light stays solid amber, unfortunately the hard drive has failed, or there is an internal power supply issue with the Time Capsule.
You should take the Time Capsule to an Apple Store.....if you have one in your area.....or contact Apple Support directly to discuss your options.
http://www.apple.com/support/contact/
If the Time Capsule is out of warranty or not covered by AppleCare, Apple will not offer repairs but there are some shops that specialize in this type of repair. See this link for more details:
Apple Time Capsule Repairers

My Time Capsule has quit backing up - now spends all it's time "preparing". I've tried the Apple suggestion of a reset which does not help. All indicators seems to be OK. Running OS 10.5.8 on G4 Powerbook, Time capule is 1st gen I believe. Any ideas?

My Time Capsule has quit backing up - now spends all it's time "preparing". I've tried the Apple suggestion of a reset which does not help. All indicators seems to be OK. Running OS 10.5.8 on G4 Powerbook, Time capule is 1st gen I believe. Any ideas?

Hello,
Thanks for your message, I have attempted to repait the permissions as tou suggested. The first time this produced a long list of exceptions and took quite a while, however although it said "Permissions repair Complete" when I ran it again there were still about 20 exceptions, I have repeated the procedure and this is unchanged. The Time Capsule now does not spend hours "Preparing", but the backup attempt fails after a few minutes with the error message "The backup volume could not be mounted." Any further ideas would be appreciated. When I use Disk Utility I can't see the Time Capsule volume, if I could I'd be tempted to re-format it and start from scratch.

IPS Modem to Vonage router to Time Capsule to Airport Express. Now I want to add a guest network.

I want to set up a guest network.
I understand that there can only be one main router and the others should be in bridge mode to set the guest network feature on the Time Capsule.
If I set the Time Capsule from bridge mode to "DHCP + NAT" then I lose my internet.
Since I think the Vonage router is set as the main router how can I swap that function with the Time Capsule or perhaps that cannot be done.
Please let me know what I should try or whether to give up.
Thanks.

Thanks. I understand you want to "swap" your Vonage box with your Time Capsule. That will require re-enabling the Time Capsule's DHCP and NAT as you already attempted and explained in your original post, connecting the Time Capsule directly to your modem, and installing the Vonage box "downstream" of the Time Capsule by connecting it to a Time Capsule LAN port.
I assume you using your Mac wirelessly, that you have cable Internet (as opposed to DSL, FiOS, satellite, or office / school wired LAN), and that right now everything is working including your Vonage telephone service. If any of that is not correct, stop here and let me know.
You should also print these instructions, since you will be unable to communicate with either your Mac or your phone until you are finished and everything works correctly. If all else fails you may have to begin all over again with a "hard reset" of both your Time Capsule and the Vonage box and reconfigure them completely. Any Time Machine backups already completed will not be affected though.
Then:
Power down your cable modem: unplug it from the wall receptacle.
Disconnect the Ethernet cable linking the Vonage box and the Time Capsule. Set it aside for now.
Disconnect the Ethernet cable end attached to the Vonage box's blue port, and connect it the Time Capsule's WAN port instead.
Take the cable you set aside and connect the Vonage's blue port to one of the three Time Capsule's LAN ports.
Power up your modem and wait a moment or two for it to complete its startup sequence.
On your Mac, open AirPort Utility and reconfigure your Time Capsule's Router Mode to "DCHP and NAT" as you did previously. Update and allow a moment or two for it to reset.
Verify that you can use your Mac to load web pages and that your Time Machine backups continue to occur as usual.
Should something not go as expected and you need to make changes, be absolutely certain to power down your modem before changing what you connect to it.
Next:
The following Vonage video will illustrate the remaining steps particular to the Vonage box: Set Up Vonage Box With Router
Review their tutorial and make sure all its instructions make sense for what you have. If something doesn't, write back and I'll try to figure it out.
... how to make the vonage router a bridge.
Unless you want to use the Vonage box's LAN (yellow) port to connect an additional wired computer or other network it's not necessary to reconfigure it as a bridge. The Vonage's router will just remain unused.
If you want to do that though, you must log in to the Vonage box's configuration web page. Its address will be assigned by your Time Capsule, sequentially: for example if your Mac's IP address is 10.0.1.2 your Vonage box might be 10.0.1.3 or something along those lines. You may have to experiment to find out what it is (see Note below). Once you find it though, you will be presented with a login page resembling the following:
Its default User Name is router and so is its password. Click Go to log in.
Once there, navigate to Basic Setup > Local Network Setup, and change DCHP Server to No as in the following:
Click Apply and you're done.
Note: just like all non-portable network devices, it makes sense to assign the Vonage box a static IP address: Basic Setup > Connect to the Internet, and change Connect Using to Static IP Address. You'll have to fill in the fields using addresses appropriate for your network.

My mac can't find time capsule, my mac can't find time capsule

my mac can't find time capsule, my mac can't find time capsule

I listed the commands.. that is how you manually mount the disk.. follow exactly the commands I gave you.
In finder use top menu, go, connect to server.
Type in the following.
AFP://TCname or AFP://TCIpaddress (obviously you replace with the actual name or the actual IP address).
If that fails..
try
SMB://TCname
Here is the screenshot.
tardis4 being the name of my TC.
It should then ask you for your credentials.
And it should remember them in the keychain and be able to then get TM to connect.

Started using my Time Capsule as a base station; now Time Machine won't work

Similar Messages

Maybe you are looking for