Starting a car constantly is not good for the engine
So then should you leave the lap top on 24/7 or would it be better to shut it off when not used for more than 3 hours. Or is stand-by better for overnight rather than turning it off?
Great question wm...there is no one standard practice, all in the owners desire for either a rapid return to last used session, ability to flip open and process new items, essentially convenience. With the improvements made in the past years of integration of components, heat dissapation, better battery construction-ion style an improvement for sure, only the individual can decide.
He is something which can generally be stated: Where you live makes a difference-sand dust, high humidity, POWER OUTAGES/SPIKES.
Do you want to avoid viruses? Although you have a good AV product, the internet connection can allow hacker to get in riding the premise of allowing email to be consistently downloaded. Remember the automatic update cycle you created time line input? Keeping the unit cleaned-free of dust mites around fan and exhaust areas, unplugging external devices,and a number of other preventative measures can be listed. Individual does as one likes.
I know-so what does Defender do..I unplug the unit from house outlet just as an old school precaution. Seen too many of the LCD screens loose pixel ratio.
Similar Messages
-
I was copying files to my time capsule when it crashed when it was almost finished. Now I am stuck with a light grey folder I can not delete. I would´t care if it wasn´t for the fact the folder is 1 TB size and takes up too much space. I have tried turning on and of Hiding Files in Finder and what not with no success. So, how do I delete this folder. Remember, I am not extremely familiar with technical terms.
I recommend you erase the TC.. it is the easiest and fastest solution.
In Airport utility open the disk tab and select erase.. choose quick erase.. it will take less than 1min.
Start again but copy files in small amounts. -
I had my MBP near two finger length magnets and someone told me that its not good for computers! Anyone's opinions on this cause my computer seems fine?
Don't worry about it. The MBP has built-in magnets. Does magsafe power connector ring a bell? The motor inside of the hard drive has a magnet.
You would need an extremely powerful magnet to affect a hard drive. I'm sure the electromagnet they use at a scrap yard to pick up a car could do it.
A long time ago I tried to erase some floppy diskettes by placing a magnet directly against the outer cover of the diskette. It had no effect on the recorded data. -
My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?
Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Depot Sales - Goods issue not done for the delivery
Hello Experts,
I am trying to capture a Excise Invoice in the Depot Sales Process TCode - J1IJ.
I am getting the follwoing message - GI not done for the Delivery.
Process which we are following here is
Depot
SO - Delivery - Picking - Packing - J1IJ - Shipment creation - Shipment Planning - Loading Start - Shipment Start (Will do PGI) - Shipment end (Will create invoice & Excise Invoice).
Excise invoice is captured during MIGO at Depot.
Can you please suggest..
Thanks & regards
MaheshHi mahesh
Change the process to following manner
Depot
SO - Delivery - Picking - Packing - Shipment creation - Shipment Planning - Loading Start - Shipment Start (Will do PGI) - Shipment end -J1IJ(Will create invoice & Excise Invoice).
u r problem will be solved.
Regards
kedasu.a -
Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W. -
having problem w 3rd party software ., there tech advsed me to repair permissions before reinstalling software . However , querrie says repairing permissions is not good for system . whats up ,, help !!!
I've fixed the problem - I think.
I forgot I had the program "Little Snitch" installed on my computer. So I went into it and saw that it was blocking most of my connections for all the programs I use on a daily basis. Once I lifted the RULE to those certain programs - BAM - everything came back to life in an instant! -
Where can I find one of those soft silicone body covers (not hardshell) for the Mac Book Pro? And is this a good idea since Apple no longer makes them? I-phones use them now.
Personally I use the Speck hard case on both of my MacBooks and they are the greates! Look around on Amazon and eBay and you can find them for $30-40. I wouldn't really recomend a silicon case for a macbook, but it's your preference.
-
Simulation engine failed to start: A valid license was not found for simulation
Hi,
I'd like to run xsim by clicking "Run Simulation" in Vivado 2015.2 . However, in the Tcl console I see this error:
INFO: [Common 17-186] '/home/rob/xilinx-projects/bright_proj/bright_proj.sim/sim_1/behav/xsim.dir/ProgNetwork_behav/webtalk/usage_statistics_ext_xsim.xml' has been successfully sent to Xilinx on Mon Jul 13 16:01:02 2015. For additional details about this file, please refer to the WebTalk help file at /home/rob/sw/xilinx/xilinx-build/Vivado/2015.2/doc/webtalk_introduction.html.
INFO: [Common 17-206] Exiting Webtalk at Mon Jul 13 16:01:02 2015...
run_program: Time (s): cpu = 00:00:08 ; elapsed = 00:00:10 . Memory (MB): peak = 6669.582 ; gain = 0.000 ; free physical = 763 ; free virtual = 18006
INFO: [USF-XSim-4] XSim::Simulate design
INFO: [USF-XSim-61] Executing 'SIMULATE' step in '/home/rob/xilinx-projects/bright_proj/bright_proj.sim/sim_1/behav'
INFO: [USF-XSim-98] *** Running xsim
with args "ProgNetwork_behav -key {Behavioral:sim_1:Functional:ProgNetwork} -tclbatch {ProgNetwork.tcl} -log {simulate.log}"
INFO: [USF-XSim-8] Loading simulator feature
Vivado Simulator 2015.2
ERROR: [Simtcl 6-50] Simulation engine failed to start: A valid license was not found for simulation. Please run the Vivado License Manager for assistance in determining which features and devices are licensed for your system.
Please see the Tcl Console or the Messages for details.
However, if you look at the attached image, you'll see that my installed licenses include the license name "Simulation".
Why is Vivado complaining about "Simulation engine failed to start: A valid license was not found for simulation" ?
Thank you,
Rob
Hi Rob,
The reason for the license error is: Hostid mismatch. i.e., the hostid of the machine is different from the hostid in the license file.
I observe that the license file is generated with hostid: 52540019ee7e. You can cross check your hostid of the machine by running the command: lmutil lmhostid
You can rehost the license file using the steps mentioned in the section "Rehost or change the license server host for a license key file" in the following user guide: http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_5/irn.pdf
Thanks,
Vinay -
Hello,i have a problem with my gift card here in switzerland,when i want to redeem the cod says that the code is not good for i tunes....and i buy the gift card from the shop...any idea? thx
I have one of these http://store.apple.com/us/personalize/itunes?product=M9949
but the credit on it is 30 chf....i try to reddem into itunes and after all the steps i recive a message that says"the serial code is not good...." i don t know why say this.... -
Position 1000001 not available for the start date of the infotype record
Dear Experts/Gurus,
I am getting the following error message "Position 1000001 not available for the start date of the infotype record" while trying to upload employees HR Master data in PA40.
I know the reason why because the position is created on 01.05.2009 & employee DOJ is 01.02.2006 both are mismatch & the position date has to be changed earlier date than DOJ but i don't know how to do.
Please let me know how to sort out this issue asap.
Rgds,
VikrantDear Friend,
Use PP02, select the position no, select infotype 1000 (Object), select planning status & validity(date) and then use the copy function to change the start date.
Regards,
Aks -
The value is not allowed for the field Cross-plant CM
Hello All
When i copy material in refernce to existin gone. I am getting this message
"The value is not allowed for the field Cross-plant CM"
I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
Any help will be good...Thanks in advance...Hi,
Please check the check box in front of the field config material is checked?
If so then this material is configurable material
A material that can have different variants.
For example, a car can have different paint, trim, and engines.
Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
Please check
BR
Diwakar -
Good for the skid rest their house is good for
good for the skid rest their house is good for our ears inner hours so you might want to look into I'll Leif you're someone who doesn't want to go to the medical grade skin care line at you Finesse Face Serum with much rather have medium and lime price why this is a very good luck period I some lip balms your slurs your fees are com the first one is by and then disco-author Mel cold cream I love this the reason why I love this one first Sunday know I have died out completely but isn't so well nicely but had alittle shimmers you didn't want to %uh wearer let's say I.http://eyebornfacts.org/finesse-face-serum/
Hello,
I am not a PC security expert but that software looks pretty suspicious to me. If you google the name of the software there are a large number of posts from people asking how to remove it and suggesting that it has been installed without their consent.
I suspect that it is adware which hijacks the users browser home page / default search, displays adverts and generates revenue for the owner. It is possible that it also causes other security issues.
I don't know enough about that software to feel confident in telling you that you '''should''' remove it (especially if you are getting value from the service it offers) but I will say that I wouldn't feel comfortable having it running on my own machine.
If you like the software then by all means keep it but I do suggest running a range of antiviurs / malware removal tools. These will run alongside your existing anti-virus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
If any of these flag easylifeapp as a problem then I suggest removing it.
I hope that helps. -
Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
May 14 2014 18:34:29
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu -
XML File not Found for the Container BC4J.cpx
Hi,
Have following error when I start a BC4J-JSP/Struts application (with Embedded and standalone OC4J) :
500 Internal Server Error
oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container BC4J.cpx
oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition(java.lang.String)
DefinitionManager.java:751
oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition()
DefinitionManager.java:793
void oracle.jbo.mom.DefinitionManager.initManager()
DefinitionManager.java:137
void oracle.jbo.uicli.mom.JUMetaObjectManager.<init>()
JUMetaObjectManager.java:57
oracle.jbo.uicli.mom.JUMetaObjectManager oracle.jbo.uicli.mom.JUMetaObjectManager.getJUMom()
JUMetaObjectManager.java:131
oracle.jbo.common.ampool.SessionCookie oracle.jbo.http.HttpContainer.findSessionCookie(javax.servlet.http.HttpSession, java.lang.String, java.lang.String, java.util.Properties)
HttpContainer.java:541
boolean oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(oracle.jbo.html.struts11.BC4JActionMapping, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
BC4JRequestProcessor.java:222
org.apache.struts.action.ActionMapping oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
BC4JRequestProcessor.java:124
void org.apache.struts.action.RequestProcessor.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
RequestProcessor.java:234
void org.apache.struts.action.ActionServlet.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
ActionServlet.java:1292
void org.apache.struts.action.ActionServlet.doGet(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
ActionServlet.java:492
void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
HttpServlet.java:740
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
HttpServlet.java:853
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
ServletRequestDispatcher.java:721
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
ServletRequestDispatcher.java:306
boolean com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.ApplicationServerThread, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletRequest, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
HttpRequestHandler.java:767
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(java.lang.Thread)
HttpRequestHandler.java:259
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run()
HttpRequestHandler.java:106
void EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run()
PooledExecutor.java:803
void java.lang.Thread.run()
Thread.java:484
Then I make a Reload and it's ok.
I have a Workspace with two Projects :
BC4J.jpr for Businnes Components
Web.jpr for JSP Struts
In /classes I have the file Web.cpx, but no BC4J.cpx.
From which does this name come ? Can I change this name ?
Thanks
YvesI found this on Metalink...
JBO-26001: NoXMLFileException
Cause: Could not open the named XML file for read.
The following is from Note 137429.1. Hope this helps.
Raja.
JBO-26001: NoXMLFileException
Cause: Could not open the named XML file for read.
Action: 1. Make sure that the file is present. In particular, if the file is to be found in a zip/jar file, make sure that the Zip/JAR file is included in the CLASSPATH.
2. This error is also reported if the name of the XML file does not match the object Name specified in the XML file. If the file system support case insensitive file names (e.g., Windows NT), make sure that the file name matches the object Name in the XML file in case-sensitive fashion.
3. For a .JPX file, this error is reported if the JPX file is missing the JboProject XML tag. Check the JPX file to make sure that the valid tag is in there.
4. One XML file may be extending another XML file (specified by the Extends element in this XML file). This error is reported if the base XML file is not found.
5. When loading the XML file for a package (JboPackage tag), this error is reported if some unexpected error occurs while loading a containee.
In all of the above cases, a more descriptive message may be printed on Diagnostic. If you are not seeing Diagnostic messages, you can run your application with Diagnostic turned on, as in "java -Djbo.debugoutput=console ...", to see Diagnostic messages.
Maybe you are looking for
-
How can I disable local file access security check?
Windows 7 Firefox 3.6.16 I would like to disable the security check used for blocking access to local files.
-
How to convert indesign document's data into the xml file
Hi all, First let me explain what exactly i am trying to do. just i want to ge all page items data (type,frame etc ) from a document and i want to convert all those data into my xml structure . now i am able to get page item's data from a document .
-
Scheduled date not matching std dates defined
Dear all, We are facing scenario where when we create process order in the system, The system automatically assign dates of operation to be completed ( Earliest & Latest ) while in recipe we have defined std time for that particular phase. So my quer
-
I am running a LabView executable which calls a DLL created in LabWindows/CVI. I get an error message when it tries to call PanelFunc (one of the GUI callback functions) that the dll is missing the .uri. How do I include a .uri when I create the .d
-
FCPX crashed and I reported it here. Tom Wolsky suggested I trash prefs, perform an fsck, reboot and redownload FCPX from the App store. The reboot was okay but Safari will not let me access the App Store to redownload FCP. I'm running 10.6.8 but the