Starting a project with 800x480

Is there anyway to start a project wi
th 800x480 resolution? Or is there a higher resolution of the same ratio
I can then export out at 800x480?
My issue is that I am trying to make a video made from screenshots off of a smartphone with this resolution. Obviously selecting 720 x 480 makes it so the images cannot fully fit the screen.  And there does not seem to be an option that has the same ratio as 800x480.
Appreciate any insight.

Welcome to the forum.
Unfortunately, there is no Preset to match your footage. PrE does not yet have PrPro's Desktop Preset, that allows customization, such as you need. Obviously, PrPro would be an option, albeit an expensive one.
One option would be to choose an HD Preset, such as 1440 x 720. The compromises would be that you would have black bars around the image. You could Scale up to match, say the sides, leaving letterboxing. Then, and depending heavily on how you need to deliver the output, you could use something like Flash (FLV), and crop in the output. Not all delivery schemes allow for that, so you will be limited.
Good luck,
Hunt

Similar Messages

  • Starting a project with a voice track

    I would like to start my project with a voiceover, but it seems that this isn't possible... is it?
    The video is basically going to be a collection of stills and text with a narrative and background music. But I want to start out by getting my spoken ideas recorded and then go from there. Is this possible in iMovie? Or will I have to record these voiceovers in Garageband, or another audio app, and then import them into iMovie?
    This is holding me up, so I hope someone can answer soon!
    Thanks....

    Welcome to the forum.
    Unfortunately, there is no Preset to match your footage. PrE does not yet have PrPro's Desktop Preset, that allows customization, such as you need. Obviously, PrPro would be an option, albeit an expensive one.
    One option would be to choose an HD Preset, such as 1440 x 720. The compromises would be that you would have black bars around the image. You could Scale up to match, say the sides, leaving letterboxing. Then, and depending heavily on how you need to deliver the output, you could use something like Flash (FLV), and crop in the output. Not all delivery schemes allow for that, so you will be limited.
    Good luck,
    Hunt

  • Started a project with the wrong format (plus another problem).  Am I screwed?

    I set up my project in 1080p 24 (23.98). Don't ask me what I was thinking, clearly I wasn't. I should have set it up as 720p 24.
    Instead of transcoding all my 720p 60 (59.94) work files by log and capture, I just started dragging and dropping them in to the timeline and they conformed automatically of course to the project settings. Well now I'm trying to use Red Giant's Denoiser 2 and it's coming up with that "Draft Mode" crap. So I tried nesting a segment and dragging that into a new sequence but making sure the sequence was at 24fps. Now when I right click on that nested clip and look at the properties it says it's at 24fps, but when I try to use the denoiser, it says it "needs sample."
    Did I utterly and completely screw myself here? Should I just chalk this one up to not using the denoiser and use it on my next project correctly? I have no idea how to keep everything sequenced, get all the individual clips properly saved to 24fps, and get the over all sequence in the correct 720p resolution.
    The only work-around that I could think up, is to export the entire sequence in 720p 24 through compressor, but I'm afraid of compromising the quality. I really don't know how to render it that way but keeping the original apple Pro Res 422 HQ format.
    Help! I'm about to lose my mind over here. I really put myself into a rookie pickle lol!

    Yah, rookie move I know. 
    They came from a canon DSLR, so they are H.264 files.
    I think I may have found another way to shoot this turkey.  It's going to take some work though.  I'll have to drag each clip from the browser window into a new timeline that is at the SAME frame rate as what I shot... 59.94.  Then I'll have to replicate the entire sequence editing although I'll have the punch in and punch out points already set.  Once everything is back in place the way I had it, and all my filters are applied (which will now work because the project is at the same framerate as the individual clips), then I can send the project to compressor and render it in 23.97 fps.
    The only thing I won't know how to do at this point is take my slow motion shots that have been conformed from 59.94 to 29.97 and get them into the project which will now be set at 59.97. 

  • What Application in Master Collection Would I Start this Project With

    I have a web project that requires me to impliment a rich user interface that incorporates voice, video, animation using a carisol and accordian menuing system.  How would I organize that workflow: Use photoshop to create the images and the slices, import the images into fireworks and create the slices and initial css/html, then bring it into dreamweaver.  Use flex and ajax to create the carisol and accordian multimedia menuing structure.  or use another process?

    Well, to be honest, you could do pretty much everything on your wish list in Flash with action script.  I don't typically recommend Flash sites as they are not user or search engine friendly.  But you've got a lot on your list that Flash is  capable of handling.
    If you're new to DW, I suggest you work through a few tutorials first.  Do not use code generated by your graphics apps.  They are ok for quick comps, but the code is far too rigid and fragile for use in a production site. Slice your images in either PShop or FW and save for the web as images only.
    Taking  a Fireworks (or Photoshop) comp to a CSS based layout in DW
    http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt1.html
    Creating  your first website in DW CS4 -
    http://www.adobe.com/devnet/dreamweaver/articles/first_cs4_website_pt1.html
    Insofar as your menus and accordions  go, you can use DW's   Spry Menus and Panels.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • Please help i started my project video format 720HD resolution 12x720 rate 25p at last when i finish and burn to dvd the edges are cut off any one help please i am really in trouble

    please help i started my project with  video format 720HD, resolution 12x720, rate 25p.  at last when i finish and burn to dvd the edges are cut off and my logo cut off the screeen aswell any one help please i am really in trouble. thanks

    Sorry, but I don't know anything about that app.
    I did go to their Web site and I see they have a support link. Perhaps you can get help there or in their forum.
    If you are OK with a DVD with a basic menu, you could try the Share>DVD option in FCP.
    Good luck.
    Russ

  • Unable to start SSIS Projects : SQL Server 2008R2 Dev edition installed on top on SQL Express 2008 with Advanced Services

    Hello,
    I first installed SQL Serrver Express Edition 2008 with Advanced Services (As a part of some client's software)
    Now I have isntalled SQL Server Developer Edition 2008, by selecting ALL features and client tools.
    Now, with BIDS, I can start SSRS and SSAS Projects, but I can't start SSIS Projects.
    I am getting below error message :
    To design Integration Services packages in Business Intelligence Development Studio, Integration Services has to be installed by one of these editions of SQL Server 2008: Standard, Enterprise, Developer, or Evaluation. To install Integration
    Services, run SQL Server Setup and select Integration Services.
    Please let me know how do I resolve this issue "Without un-installing Express Edition installed earlier on my machine"
    Please help !
    Thanks
    DP

    This is a common pitfall with the SQL Express editions. It cannot co-exist. You
    need to un-install the "Express".
    What works is having a VM with Express Tools if I you (strangely) need them.
    Arthur My Blog

  • Trouble with iMovie '11 transitions and themes? I'm running Lion, Mac OS X and just noticed today that the transitions and themes don't seem to be working at all when I start new projects or try to add to old projects.  What is the solve here?

    Trouble with iMovie '11 transitions and themes? I'm running Lion, Mac OS X and just noticed today that the transitions and themes don't seem to be working at all when I start new projects or try to add to old projects.  What is the solve here?
    I've seen notes about clearing the cache but it seems that this is an older OS and I can't find the plist mentioned here because it's an older system.  http://www.youtube.com/watch?v=2cL9RuDV3Qc 
    Thoughts?  Anyone? 

    GUYS, I NEED HELP !
    ANYONE?

  • Help with Starting My Project [Project AM]

    I apologize in advance if this is not in the correct forum.
    //The next two paragraphs are a rundown of why I am doing this project and my previous experience with Java//
    Here's where my story starts, I've just started out a new year of school and I've been placed in a Computer Science (Higher Level) class, and it so happens that I am to be coding/programming in Java. I've worked with C++ in the past, and I've noticed that Java is quite similar, thankfully.
    This Computer Science class is a two-year course, at the end of the two years I will have an external assessment (IB dossier) due. This gives me tons of time to work on this project, if you haven't noticed by now it will be an on-going project.
    I know this project is going to take some time that's why I would like to start now.
    //End of Rundown//
    My project is called "AM" and in the end it will be an "instant messenger" (with your help of course).
    The first thing I would like to establish in this project is creating a server program to accept connections and a client to connect to the server (text based). I would like multiclient connections to the one server program.
    Now here's the question, what should I look into before starting this project, what Java technologies? What resources should I grab from the library or from the book store? Basically I'm asking where I should begin?
    If anyone has any suggestions or even some personal experience with writing a program like this please contact me. I would really appreciate it. Also source code would really help in learning this, but I can probably search that on my own, thanks.
    Message was edited by:
    am.aerebia

    The easiest way to go about this is to use Sockets. You could also look into using RMI

  • Cannot Start a new project with a mapped network drive

    When I try to start a new project with Encore and save the file to our network cluster (An Isilon Server), I get a file not found error message. When I try to do this to a local drive, it works just fine. None of the other Adobe products (Photoshop, Illustrator, After Effects) have this problem with this network drive.
    Greg Glaser

    Yes, it worked on the local drive, and also to a Windows Networked Server that was not the Isilon. Even after creating the project and moving it to the Isilon, it was generating error messages after a few minutes of use. The Isilon is using a BSD variant of Linux and Samba. The really strange part is the all other Adobe products from the Production Suite work with this server without any problems at all.

  • Is it possible to link data across different/multiple PWA sites leveraging Master Project with the Subprojects feature?

    A couple different questions /similar scenarios
    1) Is it possible with Project Server 2010 to have several sites (http://server/pwa1 and
    http://server/pwa2 for example) communicate and build a Master Project at a third (or X) site (http://server/pwa3)
    2) Is it possible with Project Server 2010 to have several sites (http://server/pwa1 and
    http://server/pwa2 for example) communicate and build a Master Project at one of the original sites (http://server/pwa1 (for example))
    OR is there a better way to do this/more preferred way to do this. 
    We found this (http://social.technet.microsoft.com/Forums/projectserver/en-US/2379c3f2-6c80-46d7-8eac-3bc2ccb2d908/master-projectsubproject-with-sites-in-pwa-2010?forum=projectserver2010general)
    but its not what we're looking for
    3a) Issue/Example -
    We want to set up a site (http://server/pwa100) for just the president of the company - all the schedules of the subsites (/pwa99 + /pwa98) create a feed into an integrated master schedule/master project with subprojects(located
    in /pwa100). 
    3b-1) We also want to set up sub sites (http://server/pwa99 and
    http://server/pwa98) for each division VPs (and specific other people). These two sites would only allow specific user's project files to be viewed by each other...
    Can their project files have linkages between the two project sites (/pwa99 and /pwa98)? Meaning if user1 logs in to /pwa99 can he see a project file (given that they have permission) from /pwa98 in the same instance?
    3b-2) Can they see the project file in ProjPro and/or PWA ???
    3c) is it possible to have:
    + /pwa100 (pres)
    ++/pwa99 & /pwa98 (two vps)
    +++/pwa97 & /pwa96 & /pwa95 & /pwa-etc (minions)
    each rolling up to the next level (level 3 rolls up to level 2 which can roll up to level 1)

    kbwrecker,
    I agree with Dale. Having multiple sites will make this difficult to set up. 
    Not knowing how your Custom Groups/Categories have been set up, have you looked into using the "Project Permissions" feature to share projects. These permissions are 'additive' to the category permissions, so you could start out with people looking at the
    projects they are authorized to via categories, and then let them share/add people as needed basis. This will also satisfy the requirement of not-loading the projects with resources..
    And finally, the department and categories need not align, except that when projects from one dept are shared t another dept resource, the visibility of custom fieds will be affected.
    Hope I did not go off on a tangent there :)
    Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com
    Meant to get back to this earlier - your answer is close (because its what we currently do..sort-of)
    From my understanding of this issue the users are separated by department and can only see specific projects; however, when they try to share departments between users (so they can see their projects (dept a sees dept b projects)) this works - but there
    is a bigger issue/main issue.  
    main issue: when dept B adds a new project dept. A cannot see the new project in dept B.
    This can be eliviated by removing the user/s and re-adding them to the permission structure of the deptment but overall doing this several times based on user/s and projects being added it gets to be cumbersome and just plain annoying.
    Any help/additional thoughts would be great

  • Missing hard drive space after aborted attempt at sharing iMovie project with YouTube

    So, recently I tried sharing an iMovie project with YouTube.  I clicked on the project in my project library, then selected share with YouTube from the drop down menu.  I chose to share it as a HD 720 project.  At this point, I had 27 GB of free hard drive space. After the project was converted (or whatever it's called, a process which took about half an hour, and which left me with about 6.5 GB of hard drive space), but before the project was actually exported or shared with or uploaded or published to YouTube (the second step), I saw that it was going to take three hours to upload, so I decided I wanted to share it as a non-HD video, in order to save time and space on my HD.  I cancelled the upload.  I then deleted the project in my imovie projects folder (since it now had the HD logo beside the name), intending to just start over and share the project in 960x540.  Thing is, after deleting every trace of it I could find in iMovie, in my Documents Folder, in my Movies folder, and in iTunes, I only reclaimed 4 GB of space on my hard drive (leaving me with 10 GB).  So what happened to the missing 17 GBs, and how can I get them back?  Also, the amount of space used in order to share that project just seems excessive to me, so I realize that something else might be going on here.  Thoughts?  Suggestions?  Comments?
    Thanks.

    You're in the wrong forum.
    https://discussions.apple.com/community/ilife/imovie

  • I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

    I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
    I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
    thanks!

    Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
    Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
    You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

  • Project with profit center was not created for entire period

    Hi everybody,
    I need a help with a problem here.
    The alert mesage "project with profit center was not created for entire period" was displayed.
    Then I searched for the creation dates and the profit center was created before the project gets its firsts postings. Therefore, some line itens don't exist in profit center (ledgers).
    My two questions:
    The first one, is it possible to input line itens in a retroactive way?
    Everytime I need to use the project master data this alert is displayed. How can I fix avoid this message?
    Thanks,

    Hi,
    Regarding your issue, it is theoretically possible to reverse all settlements up to the start of the project and then to settle again it
    is a must to check in standard if the profit center is valid from the project start date onwards.
    Check the attached note 1048945.
    The system generates error message KM700 ('Profit center <PRCTR> does not exist for <date>') when you enter a profit center on a project definition if the profit center is not valid in the entire period between the basic start and the basic finish date of the project definition . However, only one warning message should only be generated in this case.
    regards
    Waman

  • In P6 version7 not able to copy project with the baseline.

    Hi,
    In P6 version 7 it is not able to copy project with the baseline. It copies only the schedule.
    Please help.
    regards,
    Baber.

    Tried the solution from another thread but did not work completely (as warned) - the workaround didn't quite work for me either:
    https://discussions.apple.com/thread/1398462?start=0&tstart=0
    Ended up taking a backup, did a fresh install, created the account as the first one so that it gets the same UID as the other Mac (on which my account was the first) and restored my data - was painful but finally on track.

  • WebDynpro for java project - with 2 languages

    Hi,
    I have WD project with 2 languages(xlf translation) :English and Hebrew.
    The project have one Application.
    I want to create Role with 2 iViews : The first one with The application in Hebrew and the second one the application in English,
    the differences between the iviews is in the "Logon Language" iview property, the first one set to Hebrew the Second one to English.
    My problem is that if i navigate to the Hebrew iview ...the English iview is shown in Hebrew to,
    After logoff/login If i navigate to the English iview the Hebrew iview is shown in English to,
    Any suggestions how to use 2 iviews of the same application in a diffrent language ???
    Thanks,F.F

    Hi F.F.,
    if you use the Web Dynpro in the Portal, the application is not change the language if you has start the application on time.
    You must close the portal (all browser sessions) and start the application in the new language.
    If you want to try that without the portal you can load the application direct, means the link you got if you deploy it and select run.
    At the end of the url please add sap-locale=<locale>  sap-locale=EN or sap-locale=HE than you will see the translations.
    That the language switch is not supported in the Portal is bug since 2006.  You must start the login with the new language. Only than it will work.
    regards
    Gunter.

Maybe you are looking for