Starting a remote login through ABAP

Hello!
First of all, I am a beginner in ABAP :).
Now the question - I have registered a remote R/3 system in SM59 and the remote login works. Is it now possible to start the remote login for that particular system through an ABAP program? If so how do I do it?
Any links to tutorials, articles or code examples will also of course be helpful..
Bye!
Sameer

hi
see the below links
MM links:
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
SD links
detailed business flow of SD MODULE INCLUDING all major tables and field
Need material regarding the Genereal Business Flow of SD, MM, PP, FISL & CO
http://www.sap-basis-abap.com/sapsd.htm
http://www.sapgenie.com/abap/tables_sd.htm
http://help.sap.com/saphelp_46c/helpdata/en/8c/df293581dc1f79e10000009b38f889/frameset.htm
Check these pdfs:
SD Workflow:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSD/BCBMTWFMSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMLO/BCBMTWFMLO.pdf
rewards points if helpful
regards
sreeni

Similar Messages

  • [SOLVED] Does my system allow remote login through SSH?

    I installed openssh some time ago, to be able to connect to my phone's storage (phone is the server). I didn't configure anything, just installed the package and connected to my phone using nautilus. Now I'm wondering, is my computer a ssh server now? Because I don't want remote login to my computer at all. The documentation is a little confusing for me on this one.
    Last edited by kox (2015-06-21 12:44:41)

    No, that is just showing the grep process... I fit was running, you'd get
    └─╼ ps aux | grep ssh
    jason 563 0.0 0.0 13316 320 ? Ss Jun20 0:00 ssh-agent
    root 2256 0.0 0.1 40420 4996 ? Ss Jun20 0:00 /usr/bin/sshd -D
    jason 25006 0.0 0.0 10948 2312 pts/4 S+ 19:11 0:00 grep --color=auto ssh
    The preferred way to check would be to query the status of the service:
    ┌─[Shiv ~ ]
    └─╼ systemctl status sshd
    ● sshd.service - OpenSSH Daemon
    Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor preset: disabled)
    Active: active (running) since Sat 2015-06-20 07:28:25 NZST; 1 day 11h ago
    Main PID: 2256 (sshd)
    CGroup: /system.slice/sshd.service
    └─2256 /usr/bin/sshd -D
    Jun 20 07:28:25 Shiv systemd[1]: Started OpenSSH Daemon.
    Jun 20 07:28:25 Shiv systemd[1]: Starting OpenSSH Daemon...
    Jun 20 07:28:25 Shiv sshd[2256]: Server listening on 0.0.0.0 port XXXX.
    Jun 20 07:28:25 Shiv sshd[2256]: Server listening on :: port XXXX.

  • Remote login through a web service

    Can you set up a login process in a CFC so it can be used
    remotely through a
    web service? I would like to have my members be able to have
    their clients
    login to a section of my web site through their own web site.
    Is there anyplace I can find an example of this?
    Wally Kolcz
    Developer / Support

    <cfcomponent>
    <cffunction name="CLogin" access="remote"
    returntype="string">
    <cfargument name="username" type="string"
    required="true">
    <cfargument name="password" type="string" required="true"
    <cfset
    MM_redirectLoginSuccess="
    http://www.softproofs.com/clientarea/index.cfm">
    <cfset
    MM_redirectLoginFailed="index.cfm?login=failed">
    <cfquery name="MM_rsUser"
    datasource="#Request.MainDSN#">
    SELECT username,password,priv FROM clients WHERE
    username=#argument.username# AND password=#argument.password#
    </cfquery>
    <cfif MM_rsUser.RecordCount NEQ 0>
    <cftry>
    <cflock scope="Session" timeout="30" type="Exclusive">
    <cfset Session.MM_Username=#argument.username#>
    <cfset Session.MM_UserAuthorization=MM_rsUser.priv[1]>
    </cflock>
    <cfif IsDefined("URL.accessdenied") AND false>
    <cfset MM_redirectLoginSuccess=URL.accessdenied>
    </cfif>
    <cflocation url="#MM_redirectLoginSuccess#"
    addtoken="no">
    <cfcatch type="Lock">
    <!--- code for handling timeout of cflock --->
    </cfcatch>
    </cftry>
    </cfif>
    <cflocation url="#MM_redirectLoginFailed#"
    addtoken="no">
    <cfelse>
    <cfset MM_LoginAction=CGI.SCRIPT_NAME>
    <cfif CGI.QUERY_STRING NEQ "">
    <cfset MM_LoginAction=MM_LoginAction & "?" &
    XMLFormat(CGI.QUERY_STRING)>
    </cfif>
    </cfif>
    </cffunction>
    </cfcomponent>

  • ABAP Database XIP must be started on remote server

    Hi All
             while starting the SAP through startsap.
    startsap
    Checking XIP Database
    ABAP Database is not available via R3trans
    Starting SAP-Collector Daemon
    This is Saposcol Version COLL 20.95 700 - AIX v11.65 5L-64 bit 090118
    Usage:  saposcol -l: Start OS Collector
            saposcol -k: Stop  OS Collector
            saposcol -d: OS Collector Dialog Mode
            saposcol -s: OS Collector Status
    The OS Collector (PID 184746) is already running .....
    saposcol already running
    ABAP Database XIP must be started on remote server
    while checking through the command R3trans -d
    output is
    R3trans -d
    R3trans: Command not found.
    scpa01:scpadm 3> r3trans -d
    r3trans: Command not found.
    scpa01:scpadm 4> R3trans -d
    This is R3trans version 6.14 (release 700 - 25.10.10 - 11:48:42).
    unicode enabled version
    --- Unicode interface [nlsui1.c line 1842] pid = 197118 time = 1320146698:
    Cmdline : R3trans -d
    Function dlerrorU16 :
    Array err_msgU length MAX_ERROR_LN is too small.
    --- Unicode interface -
    End of message -
    2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/XIP/SYS/exe/run') or dbms_type ('ORA')"
    R3trans finished (0012).
    What could be the error. Can anybody be help in this regards.
    Thanks
    Regards
    Ravi

    Hi sunny
      Output of trans.log is
    cat trans.log
    4 ETW000 R3trans version 6.14 (release 700 - 25.10.10 - 11:48:42).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 02.11.2011 - 09:49:50
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Wed Nov  2 09:49:50 2011                                                  90  0.000090
    4 ETW000  [dev trc     ,00000]  db_con_init called                                                        22  0.000112
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                                                 37  0.000149
    4 ETW000  [dev trc     ,00000]  Loading DB library '/usr/sap/SCP/SYS/exe/run/dboraslib.o' ...             33  0.000182
    4 ETW000  [dlux.c      ,00000]  *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/SCP/SYS/exe/run/dboraslib.o") FAILED
    4 ETW000                          "errno=8, Exec format error"                                          1616  0.001798
    4 ETW000  [dbcon.c     ,00000]  *** ERROR => Couldn't load library '/usr/sap/SCP/SYS/exe/run/dboraslib.o'
    4 ETW000                                                                                52  0.001850
    2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/SCP/SYS/exe/run') or dbms_type ('ORA')"
    here it is written that maybe someone has set the invalid values for DIR_LIBRARY. we have upgraded the Oracle 10.2 to 11.2 & only changed in the scripts with values having 102 to 112 (/oracle/XIP/102_64/lib) to /oracle/XIP/112_64/lib) . i have again copied these files and changed it again and also checked the permission of these files & environment of sidadm also.
    thanks
    Regards
    Ravi

  • Error msg like :ORACLE not started when login through SQL Tool

    Hi All,
    When i login through SQL TOOL (either sysdba/system/scott... any user) the error msg like ORACLE not started ....
    so i check the services from controlpanel->administraive tools->services ->Oralceservice<dbname> service ... so in this service is in manual & starting but not started.....
    This happen becoz i stated in manual first time & now i change it then it display as strating not started.....
    pls. if u have any solution related to this service infrom me...
    Thx

    Make your instance service in the windows services as auto start. However, if it show starting not started, just stop and start again. Otherwsie, shutdown your windows and start it again.
    Jaffar

  • Parallel Processing through ABAP program

    Hi,
    We are trying to do the parallel processing through ABAP. As per SAP documentation we are using the CALL FUNCTION STARTING NEW TASK DESTINATION.
    We have one Z function Module and as per SAP we are making this Function module (FM)as Remote -enabled module.
    In this FM we would like to process data which we get it from internal table and would like to send back the processed data(through internal table) to the main program where we are using CALL FUNCTION STARTING NEW TASK DESTINATION.
    Please suggest how to achieve this.
    We tried out EXPORT -IMPORT option meaning we used EXPORT internal table in the FM with some memory ID and in the main program using IMPORT internal table with the same memory ID.  But this option is not working even though ID and name of the internal table is not working.
    Also, SAP documentation says that we can use RECEIVE RESULTS FROM FUNCTION 'RFC_SYSTEM_INFO'
    IMPORTING RFCSI_EXPORT = INFO in conjunction with CALL FUNCTION STARTING NEW TASK DESTINATION. Documentation also specifies that "RECEIVE is needed to gather IMPORTING and TABLE returns of an asynchronously executed RFC Function module". But while creating the FM remote-enabled we cant have EXPORT or IMPORT parameters.
    Please help !
    Thanks in advance
    Santosh

    <i>We tried out EXPORT -IMPORT option meaning we used EXPORT internal table in the FM with some memory ID and in the main program using IMPORT internal table with the same memory ID. But this option is not working even though ID and name of the internal table is not working</i>
    I think that this is not working because that memory does not work across sessions/tasks.  I think that the
    IMPORT FROM SHARED BUFFER and EXPORT TO SHARED BUFFER would work.  I have used these in the past and it works pretty good.
    Also,
    here is a quick sample of the "new task" and "recieve" functionality.   You can not specify the importing parameters when call the FM.  You specify them at the recieving end.
    report zrich_0001 .
    data: session(1) type c.
    data: ccdetail type bapi0002_2.
    start-of-selection.
    * Call the transaction in another session...control will be stop
    * in calling program and will wait for response from other session
      call function 'BAPI_COMPANYCODE_GETDETAIL'
               starting new task 'TEST' destination 'NONE'
                   performing set_session_done on end of task
        exporting
          companycodeid             = '0010'
    * IMPORTING
    *   COMPANYCODE_DETAIL        = ccdetails
    *   COMPANYCODE_ADDRESS       =
    *   RETURN                    =
    * wait here till the other session is done
      wait until session = 'X'.
      write:/ ccdetail.
    *       FORM SET_session_DONE
    form set_session_done using taskname.
    * Receive results into messtab from function.......
    * this will also close the session
      receive results from function 'BAPI_COMPANYCODE_GETDETAIL'
        importing
           companycode_detail        = ccdetail.
    * Set session as done.
      session = 'X'.
    endform.
    Hope this helps.
    Rich Heilman

  • Remote login in SM51 Fails / ECC 6.0 / HP-UX / Oracle 10

    Hi All,
    We had a cluster, 4 physical servers / 14 SAP Instances / HP-UX - Oracle 10G /  ECC 6 EHP 3.
    Basically we have a general RFC problem in the system. You can reproduce it simply in transaction sm51: In most of the instances whenever you try to change to an instance that has the same instance number than the one you are logged on at this moment, you will come back to this instance, e.g.:
    you are logged on at host1_SID_01, start sm51 and try to change to the instances:
    host2_SID_01,
    host3_SID_01 or
    host4_SID_01
    (or you try to display the system log or other). You will see (System - Status) that you don't change to these instances but will stay on host1_SID_01.
    We found the SAP Note 662895 - Remote login using SM51 Fails. In this note they refer to the error: "Transaction termination 14 025".
    Now we have this error (we upgraded from SAP 46C with another error in sm21).
    The problem is that we really donu2019t understand exactly what they want to do in the SAP Note 662895:
    Summary
    Symptom
    Remote login in SM51 by double-clicking R/3 instances fails
    Solution
    You can use transaction SM51 to log in to another application server using RFC, without entering a password. Server "A"
    Server "A"                                          Server "B"
            <--Remote logon via RFC   <--
    GUI
          sm51
    Double-click on the server B entry --->
    If host name "B" was entered on server "A" as the gw/alternative_hostnames profile parameter, the local SAP gateway from server "A" is used when you log on to server "B". This results in the syslog message "Transaction termination 14 025".
    The same error occurs if you try to open a new external mode on server "A".
    Who is the origin server? Host A? Host B? In fact sometimes you can go from A to B and vice versa. So changing the gw/alternative_hostnames parameter doesn't appear to be a solution.
    I would appreciate some tips about this Note / Problem.
    Best Regards,
    Erick Ilarraza

    Hello, thanks a lot for your replyes.
    Abhijeet Siras, the command /etc/ping <host> works prefectly.
    Sergo,
    Exactly we have 3 host each one with 4 dialog instances. 1 host with 2 dialog instances and one host with the central instance.
    Not all  instances have this problem, only the following combination:
         Origin                     Destination
    host4_SID_01    - >     host1_SID_01
    host2_SID_03    - >      host3_SID_03
    host1_SID_01    -->  host3_SID_01
    host1_SID_02   -->     host3_SID_02
    host1_SID_03   -->     host3_SID_03
    host1_SID_04   -->     host3_SID_04
    host2_SID_01   -->     host3_SID_01
    host2_SID_02  -->     host3_SID_02
    host2_SID_03  -->     host3_SID_03
    host2_SID_04  -->     host1_SID_04
    host2_SID_04  -->     host3_SID_04
    host3_SID_04  -->     host1_SID_04
    host4_SID_01  -->     host1_SID_01
    host4_SID_02  -->     host1_SID_02
    host4_SID_02  -->     host2_SID_02
    host4_SID_02  -->     host3_SID_02
    The problem is between *_NUMBER to *_NUMBER!
    For example from Dialog Instance 3 running on host 2 to Dialog Instance 3 running on host 3
    For example host4_SID_01 means the Dialog Instance 1 running on host 4.
    Best Regards,
    Erick Ilarraza

  • What is the best way to remotely login to another Mac?

    My mother & I recently decided to take the plunge from the PC world to Apple world.  I have an MBP w/ OS X 10.8.2, and she has the same w/o the recent OS upgrade (10.7.?).  While we're both still at the bottom of the learning curve, I'm a little further ahead and am constantly running over to her place to trouble shoot/assist her with the transition.  I've been researching ways to remotely login to her computer and am now more confused than when I started.  Can anyone point me in the right direction?  I basically want to be able to login to her system and takeover as if I were on site.  And, while I don't know if my research, thus far, has brought me any closer to a solution, it has raised a few questions:
    1)  Do I simply want to go with 3rd party sofware like Logmein and will the free versions be sufficient or are they just trial offers?
    2)  Or is ARD my best option and am I right in assuming we'd each have to pony up the $80 for installs on both MBPs?
    3)  Some of the discussions talk about much more expensive ARD fees with multiple licenses.  Am I correct in assuming these are meant for network administrators and wouldn't be necessary for my purposes?
    4)  I noticed a free VCN version available from the App Store but came accross posts which seem to indicate possible security issues.  Are these valid concerns and does ARD address them?
    5)  Will I run into problems because we're using different OSs?
    6)  I attempted to follow instructions for an "ssh" remote login that I found by doing a search of 'remote login' under the Apple Support.  But when a password was requested, I didn't seem to be able to enter one into the command line.  Again, I'm new to Macs, but the cursor didn't move when I entered characters, so I was left wondering whether characters were being entered or whether this is Appple's '*****' feature used to guard passwords.  Either way, after 3 attempts, my efforts were repeatedly terminated.  Unfortunately, I'm not even sure I was entering a valid password as the article I'm referring to didn't specify how to set a password.  I used a VCN password I had set up under the Remote Management option in the Sharing utility under System Preferences.  I'm assuming this was the password they were looking for but couldn't be 100% sure as the instructions I followed were not related to "ssh" logins nor were they from Apple Suppot.  Anyway, is this "ssh" login worth pursuing and does it function independently or does it only work in conjuction with ARD?  If it is a stand alone solution, where can I go for better guidance?  The Apple Support link I used was:  http://support.apple.com/kb/PH1112.
    7)  Being recovering Windows users, we both have MS Office for Mac 2011 which has MS's Remote Desktop Connection app.  But from reviewing a few posts, it looks like that comes with it's own set of issues.  It also kind of defeats the purpose as I'm trying to wien myself off of MS.  But if someone out there has experience and suggests this as the "ultimate" solution, I'm willing to listen.
    I know I've babbled on quite a bit and I don't actually expect anyone to take the time to answer all of my questions.  But I'm hoping I might get a collective answer, and more importatnly, I'm really hoping to narrow the field and get generally guidance on the best Mac-to-Mac remote login solution.  Thanks in advance for any advice.

    Hi gregory,
    It is a big subject, and the following article sets out various options.
    http://www.macworld.com/article/1152611/remoteaccesintro.html

  • Remote system through apis

    Hi,
    How I can create one record in a MDM repository to a specific remote system already existing in MDM through ABAP APIS
    Regards,
    Sammy

    Hello,
    I do not know the specifics for APIS, but in general in MDM, you need to first create the record and then to syndicate it using the port associated to the remote system. This will generate the remote key for the remote system required.
    I hope that helps,
    Alejandra

  • Creation of IDOC through abap program.

    hello all,
    I hav created idoc through abap program. I hav used FM 'Master_idoc _distrribute'.this program creates an idoc but giving status 30. can any one tell me how to get status 03. I hav already created port, Logical sys,partner no.,distribution model.
    My Program is as follows:
    ABLES : CRMD_ORDERADM_I,CRMD_ORDERADM_H,CRMD_SCHEDLIN.
    DATA : S_CTRL_REC LIKE EDIDC OCCURS 0 WITH HEADER LINE,"Idoc Control Record
           ORDER_NO TYPE CRMT_OBJECT_ID VALUE '5000000032'," SEGMENT ORDER DATA
           PRODUCT TYPE CRMT_ORDERED_PROD VALUE 'SRV_01',
           QUANTITY TYPE CRMT_SCHEDLIN_QUAN VALUE '1.000'.
    DATA : ZORDER LIKE ZORDER_NUM OCCURS 0 WITH HEADER LINE.
    DATA :  T_EDIDD LIKE EDIDD OCCURS 0 WITH HEADER LINE.     "Data Records
    DATA :  T_COMM_IDOC LIKE EDIDC OCCURS 0 WITH HEADER LINE. "Generated Communication IDOc
    CONSTANTS :
    C_ZRZSEG1 LIKE EDIDD-SEGNAM VALUE 'ZORDER_NUM'.
    PARAMETERS :  C_MESTYP LIKE EDIDC-MESTYP DEFAULT 'ZORDER_IDOC2', "Message Type
                  C_RCVPRT LIKE EDIDC-RCVPRT DEFAULT 'LS',          "Partner type of receiver
                  C_LOGSYS LIKE EDIDC-RCVPRN DEFAULT 'BSNL_OUT',
                  C_RCVPOR LIKE EDIDC-RCVPOR DEFAULT 'A000000006',
                  C_SNDPOR LIKE EDIDC-SNDPOR DEFAULT 'SAPBCD0000',
                  C_SNDPRN LIKE EDIDC-SNDPRN DEFAULT 'BCDCLNT100',
                  C_IDOCTP LIKE EDIDC-IDOCTP DEFAULT 'ZORDER2',
                  C_SNDPRT LIKE EDIDC-SNDPRT DEFAULT 'LS'.          "Destination System
    ***START-OF-SELECTION
    START-OF-SELECTION.
      PERFORM GENERATE_CONTROL_RECORD.
      PERFORM SEND_IDOC.
    *&      Form  generate_control_record
    FORM GENERATE_CONTROL_RECORD .
      S_CTRL_REC-RCVPOR = C_RCVPOR. "Receiver Port
      S_CTRL_REC-MESTYP = C_MESTYP. "Message type
      S_CTRL_REC-IDOCTP = C_IDOCTP. "Basic IDOC type
      S_CTRL_REC-RCVPRT = C_RCVPRT. "Partner type of receiver
      S_CTRL_REC-SNDPOR = C_SNDPOR. "SENDER PORT
      S_CTRL_REC-RCVPRN = C_LOGSYS. "Partner number of receiver
      S_CTRL_REC-SNDPRT = C_SNDPRT. "Sender Partner type
      S_CTRL_REC-SNDPRN = C_SNDPRN. "Sender Partner Number
    APPEND S_CTRL_REC.
    ENDFORM.                    " generate_control_record
    *&      Form  send_idoc
    FORM SEND_IDOC.
    ZORDER-ORDER_NO = ORDER_NO.
    ZORDER-PRODUCT = PRODUCT.
    ZORDER-QUANTITY = QUANTITY.
    APPEND ZORDER.
    T_EDIDD-SEGNAM = C_ZRZSEG1.
    T_EDIDD-SDATA = ZORDER.
    APPEND T_EDIDD.
      CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
        EXPORTING
          MASTER_IDOC_CONTROL            = S_CTRL_REC
        TABLES
          COMMUNICATION_IDOC_CONTROL     = T_COMM_IDOC
          MASTER_IDOC_DATA               = T_EDIDD
        EXCEPTIONS
          ERROR_IN_IDOC_CONTROL          = 1
          ERROR_WRITING_IDOC_STATUS      = 2
          ERROR_IN_IDOC_DATA             = 3
          SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
          OTHERS                         = 5.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ELSE.
        COMMIT WORK.
        LOOP AT T_COMM_IDOC.
          WRITE:/ 'IDoc Generated - ', T_COMM_IDOC-DOCNUM.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    " send_idoc
    I hav created segment , basic type,message typealso and release also .I also linked them.
    Plz help me.
    Hemlata

    Hi Hemalatha,
    Just call this Progream RSEOUT00 from your Zprogram and pass the basic parameters like IDOC number, Basic type,Partner number etc.
    You can check the parameters by executing the Program RSEOUT00.
    This Program will change the status of your IDOC 30 to 03.
    Thanks.
    Note:Reward Points if you find useful.

  • Is there a way to access remote login and screen sharing logs?

    I have a very high suspicion that my macbook air has been accessed through remote login. Here's what happened. I closed my macbook air, letting it sleep, and left my house. After coming back I found it logged into the Guest account (which I didn't know was enabled). Remote login, Remote sharing and file sharing were enabled but I disabled them. I can't remember enabling them but maybe I did.
    I am also on a local network with about 8 other devices connected. I looked through /private/var/log/system.log but couldn't find anything concrete. I have yet to log out of the guest account and have connected to another internet connection just to be on the safe side. 
    My other user account is passworded and I could switch back to it from guest.
    So if my macbook was accessed through remote login, is there a way to tell from what IP address it came from?
    Please help me get to the bottom of this.

    May 20 13:03:44 XXXXXXXX-MacBook-Air.local loginwindow[51]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    May 20 13:03:44 XXXXXXXXMacBook-Air.local loginwindow[51]: USER_PROCESS: 51 console
    May 20 19:11:14 XXXXXXXXXXX-MacBook-Air.local loginwindow[51]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    I guess if it did happen it would have said so. Thanks anyway.

  • Can't download files -even the support center's remote login appl won't download;  web sites like USA Today will not open; etc.

    This all started by certain sites not opening, like USA Today; Intellicast.com.  Installed Maverics yesterday successfully and the web sites very briefly worked and then starting failing again.  Called tech support and couldn't download their remote login code.  From Safari's viewpoint thought there might be a problem with Adobe Flash.  So deleted that and then tried to download the installer code from Adobe and that wouldn't download.  Suggestions would be appreciated.

    Firefox can find plugins in several locations, but Firefox 21 changed the location of the "shared" plugin folder so older installers like the Microsoft Windows Media Plugin no longer drop the DLL file in the correct location.
    There apparently are two ways to address this:
    (1) Change a Firefox preference so that Firefox checks the old location. Here's how:
    (i) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (ii) In the filter box, type or paste '''plugins''' and pause while the list is filtered
    (iii) Double-click '''plugins.load_appdir_plugins''' to switch its value from false to true.
    This will take effect after you restart Firefox.
    (2) Copy the plugins folder to the new location. Here's how on Win 7 64-bit:
    Open a Windows Explorer window to:
    C:\Program Files (x86)\Mozilla Firefox
    Right-click and copy the '''Plugins''' folder
    Double-click the '''browser''' folder to open it
    Right-click and paste
    Right-click the new copy of '''Plugins''' and rename it to '''plugins'''
    After restarting Firefox, the plugins in that folder should now be available.
    ''Edit: I suggest just doing #1.''

  • The connection was denied because the user account is not authorized for remote login

    Using Terminal Server 2008 not able to get non administrator users to login to the remote desktop. Have tried from Windows server 2008 and from Windows servers 2003. Get error login in "The connection was denied because the user account is not authorized for remote login" from Windows Server 2008. Error "The requested session access is denied" from Windows Server 2000.

    Is that seriously the only way to do this? Doesn't this render the "Allow log on through Terminal Services" GP Setting useless?
    I would like to know this answer, as well.  I have created a new AD group for my assistant admins called "Domain Admins (limited)".  I have added this group to the GP setting "Allow log on through Terminal Services", but the
    assistant admins cannot log in through RDP.  It 'feels like' this is all I would need to do.
    Craig
    Found some good info
    here. There are really two things required for a user to connect to a server via RDP. You can configure one of them via Group Policy but not the other.
    1) Allow log on through Terminal Services can be configured through Group Policy, no problem.
    2) Permissions on the RDP-listener must also be granted.  If your user is a member of the local Administrators group or the local Remote Desktop Users group then this is handled.  If you are trying to utilize a new, custom group (as I am),
    then there isn't a way to do this via group policy (that I have found).
    EDIT: Found the answer.  I am creating a blog post to outline the steps.  They aren't hard, but they're not self-explanatory.  It deals with the Restricted Groups mentioned above, but it's still automate-able using Group Policy so that you
    don't have to touch each computer.  I think the above poster (Andrey Ganev) got it right, but
    I had trouble deciphering his instructions.
    Here is my blog post that walks through this entire process, step-by-step.

  • Can't Set Remote Login OFF via Send Unix Command systemsetup

    Trying to use the System Setup->Remote Login template in ARD to turn off Remote Login (SSH) in Sharing panel of System Preferences on Mac that is administered through Apple Remote Desktop.
    In Apple Remote Desktop (ARD), I select the client machine, then choose "Send Unix Command..." from the "Manage" menu. In resultant window, I pick "System Setup->Remote Login (SSH) from the "Template" drop down box in the upper right. That populates the upper window with Unix commands. I edit/change the "on" to "off" and tell the dialog to Run command as User: root, then click on "Send" button.
    Progress bar goes forever with no change.
    I can turn off Remote Login via ARD by controlling each client machine via an ARD WINDOW, then navigating to the Sharing Preference pane, but that process is tedious when performing for multiple client Macs.
    Strange, but I CAN use the "Send Unix Command..." outlined above to turn ON Remote Login, and get the status of Remote Login ("systemsetup -getremotelogin"). Just can't turn OFF Remote Login (quickly/efficiently).
    man systemsetup suggests I need to write the command as "setremotelogin -f off" but that failed with an improper command syntax error.
    Thoughts?

    It’s waiting for you to type a confirmation. If you run this command on the command line normally, you’ll see the message:
    Do you really want to turn remote login off? If you do, you will lose this connection and can only turn it back on locally at the server (yes/no)?
    Use this command instead:
    systemsetup -f -setremotelogin off

  • Database login through OEM

    Dear all,
    When try to log in to target database in OEM, the web browser hanging for a long time before disconnecting.
    The browser interface is as the follwoing. Even connect as sysdba doesn't work.
    Username:
    Password:
    Database:
    Connect As:
    The user account can connect to database using sqlplus and host login through OEM works fine too. Could some one give a hint on this problem?
    Thanks
    Jiang

    I hope the following is a better description.
    After log in to OEM browser located in the OMS server, select a target database instance, which is in the remote machine. The following page has four tabs, Home, Performance, Administration and Maintenance. Select Performance, the next page is Database login form needs following information:
    user name:
    password:
    Database:
    Connect As.
    Although I provide the correct information, the connection is hang for ever. The database instance is up and running.
    Jiang.

Maybe you are looking for