Starting a report in different positions using parameters

Hi buddies.
Here is the situation. When generating mailing labels sometimes we could end up with just printing one label in a page. So for the next one we have to get a fresh page(paper). Instead if we have parameter which says a label number and using that we should be able to select the position inside a page and print there instead of the default starting position. But there is no such system property through which we can change the default position in a page. Can anybody throw some light on this issue.
Thanks in advance,
VaradhaRajan.

Hi Guys
I have found out the solution by myself.
I inserted dummy records (empty) according to the number entered number of records will be inserted. So the position is determined with the number of empty records preceeding it.
Thanks

Similar Messages

  • Xmlp reports in different languages using XLIFF translation

    We are doing xmlp reports in different languages using XLIFF translation and it is working fine. But for Arabic and Japanese pdf reports printing “????” instead off Arabic and Japanese. Upgraded Adobe Acrobat Reader to 7.0 and down loaded languages support updates but its still not working.
    Are we missing anything?

    Hi,
    I am also facing the same issue. I am also getting "????" instead of Hebrew translation. I am trying to generate PDF file using the XMLP API. It works fine when tried to generate from MS Word using the "Preview Translation" option.
    Please let me know is there any configuration parameters that need to be set.

  • Problem in Calling a report from form 6i using parameters

    Hello Oracle experts,
    I am facing a problem while calling a report using form 6i and passing parameters,
    Actually the problem is I want to use the parameters passed to reports in a
    query group in my report. I am not able to use the parameters passed by form to report in one of my query groups in report. Could anybody guide my how to use it.
    Thanks

    Hello Oracle experts,
    The parameters are getting passed successfully in my report.
    But I want to know hous to use it in my query group.
    I just want the syntax.
    Thanks

  • Export and save a Crystal Report in PDF using parameters

    Hi @all!
    Is it possible to suppress the output of an Crystal Report in a window using parameters? Instead of that I want to save the pdf in a specified folder without using the publication-function.
    Fot the parameter I use these link:
    [http://devlibrary.businessobjects.com/businessobjectsxir2/en/en/boe_sdk/boesdk_dotnet_doc/doc/boesdk_net_doc/html/Report_Linking13.html]
    Best regards,
    Dirk

    Hi,
    this is the forum for the SAP Integration Kit. I would suggest you post your question into the Crystal Reports forum.
    the answer - yes you can use OpenDocument to show the report right away as PDF.
    Ingo

  • Export Jasper Report Through JSP(using parameters)

    Hi All ;
    Please I need A help ;
    I need to use a Jasper Report in my jsp pages using parameters ;
    can some one tell me how i can do it by steps & with example ;
    note that i use Oracle Data Base;
    Regards;

    I would start off reading a JasperReports tutorial.
    Here is a list of all JasperReports tutorials available on the world wide web:
    http://www.google.com/search?q=jasperreports+tutorial

  • How to display the header data on different position in alv report

    hi all,
    how to display the header data on different position in alv report.
    for example ,
    customer                                                   name
      xxxx                                                         xxxx
                     vendor        name     street 
                      xxxx         xxxx      xxxxx
    pls   help me .

    hi
    as per my understanding you need to trnasfer header internal table data  to pdf..
    please check the following links for internal table to pdf..
    Convertion of Internal table data to PDF
    This link is related to ur issue
    Re: how to insert the calling of the FM: OTF to PDF
    Thanks

  • SSRS reporting with sharepoint list using Distinct and Multivalue parameters

    i want create ssrs report with sharepoint list using ms-vs(2008). i want create Distinct multivalue parameters by using CAML query. There is any way we put CAML query where we use Distinct keyword and IN clause in CAML query... i hope all experts will
    understand my poor English... sorry for poor English.. plz help me

    Hi AsifMehmood,
    Per my understanding you have create an SSRS report with SharePoint list, now you don’t know to create the distinct parameters by using CAML query,  right?
    For the CAML language doesn’t have any reserved word (or tag) to set this particular filter to remove duplicate results, but we can use the custom code to do this function. I have tested on my local environment and we can do that by create one hidden parameter(Param1)
    to get all the values from the fields which will  add the filter and then create another parameter(Param2) to get the distinct values based on the Param1, we use the custom code to do the deduplication.
    Step by Steps information in below thread for your reference to create the parameters and the custom code:
    "How to get distinct values of sharepoint column using SSRS"
    Other similar thread for your reference:
    https://audministrator.wordpress.com/2014/02/17/sharepoint-list-add-distinct-parameter-value/
    If your problem still exists, please feel free to ask and also try to provide us more details information.
    Regards
    Vicky Liu

  • How to emabed BI Publisher report  to a different application using GO URL

    Hi all,
    How to emabed BI Publisher report to a different application using GO URL.
    I put the BI Publisher report in dashboard and create a go url but the problem is it is showing top header and all dashboard names present in my dashboard.
    I want to show only report.
    If we do a GO url of answers requst it shows only report . Same way can we do for BI publisher request.
    Thanks

    10g or 11g?
    for any you can get the link from BIP report properties. and use that link

  • Link two reports using parameters

    Hi,
    We are using business object XI.
    I am trying to link two reports using parameters. I cannot use subreport option becuase inside the subreport I should link another report too. So,
    Report 1(High level summary)
    Report 2(Middle level summary)
    Report 3(Detail level)
    I tried to use hyperlink option and used following string.
    http://<server_name>/<Virtual Directory>/object.rpt?prompt0={?param1}&prompt1={?param2}
    Here is my question.
    1. Server name: Does it include port number??
    2. Virtual Directory: I am absolutely lost. I tried the "frsinput" directory the actual rpt file is storing. It is not working.
    Do you have general path??
    3. Parameters: I have 5 parameters to pass. 3 of them are Strings and the rest are DateTime.
    Basically, I need any tutorial about this kinds of things. The tutorial I have got only discribe link like "www.yahoo.com"
    BTW, is this even possible solution??

    Hi,
    I am trying to link two reports in the crystal report designer->deploy to the server->show in the DHTML viewer.
    When I create a URL from report A, it looks like "&" disapears. For example, I created a hyper link from report A using formula,
    http://server:port/........openDocument.jsp?sDocName=reportB&sType=rpt&paramName1="Trim(ToText({?param1},"#####"))"&paramName2="+Trim(ToText ({?param2},"#######"))
    But when I see the actual URL, all the "&" disappears so it looks like
    http://server:port/........openDocument.jsp?sDocName=reportBsType=rptparamName1="Trim(ToText({?param1},"#####"))"paramName2="+Trim(ToText ({?param2},"#######"))
    No wonder it is not working.
    I guess I need special protection for "&" sign. Do you know any?

  • Can I re-use a parameterized manual test case with different set of parameters in a different test plan?

    Can I re-use a parameterized manual test case with different set of parameters in a different test plan without impacting the parameters in the first test plan?

    Hi ssteele_1,
    Thank you for posting in MSDN forum.
    Generally, I know that if you want to re-use a parameterized manual test case and without impacting the parameters in the first test plan.
    I suggest you could try to right click this parameterized manual test case ->Select the Create copy and add to suite option like the following screen shot.
    Then the parameterized manual test case can be re-used as a new test case in this MTM and it will did not impact the original parameterized manual test case.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to create a report with different page sizes

    Hi,
    I would like to create a report with different page sizes, it's possible to do it with diadem?
    When I change the layout parameters, changes afect to all sheets...
    Is there a way to change page size individually for each sheet?
    Thanks in advance.
    Marc

    Hi Marc,
    You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach.  This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
    ' Print PDF Page by Page.VBS
    OPTION EXPLICIT
    Dim i, Path, OldPrintName
    Path = AutoActPath & "2D Stacked"
    Call DataDelAll
    Call DataFileLoad(Path & ".TDM")
    PDFFileName = Path & " Page by Page.pdf"
    IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
    OldPrintName = PrintName
    PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
    PDFResolution = "72 DPI" ' "2400 DPI" , "default"
    PDFOptimization = TRUE
    PDFFontsEmbedded = FALSE
    PDFJPGCompressed = "high"
    PrintOrient = "landscape" ' orient paper
    Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
    PrintLeftMarg = 0.181
    PrintTopMarg = 0.181
    PrintWidth = 10.67
    'PrintHeigth = 7 (read-only)
    Call WndShow("REPORT")
    Call DocStart ' Begin multi-page document/print job
    FOR i = 1 TO 4
    Call PicLoad(Path & ".TDR")
    Call GraphSheetNGet(1)
    Call GraphSheetRename(GraphSheetName, "Page " & i)
    Call PicUpdate
    Call PicPrint("WinPrint") ' Add a page to be printed
    NEXT ' i
    Call DocEnd ' End multi-page document/print job
    PrintName = OldPrintName
    Call ExtProgram(PDFFileName)
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • BO xi 3.1 u2013 schedule a template for multiple reports with different column

    Hi,
    I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
    For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
    Thanks!

    Hi,
    The only approach I can think of is to create a template report which uses variables
    For each column you would need to variable
    v_columnAName and v_columnAValue
    v_columnAName would have a if statement in it
    =if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
    v_columnA would have a if statement in it
    =if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
    This would only work when you had a small set of clients.
    This might be more managable if it was done in the universe
    Regards
    Alan

  • How to get blank records at the start of report output for label sheet?

    Hello -
    What is the best way to get an arbitrary # of blank records at the start of report output?
    I am writing a report that will be printed out on label sheets -- some of which might already be used. For example, there might be 3 labels per page but the first 2 have been used the last time the report was run.. so the report needs to display 2 blank records first so that the first record that gets printed on a label is in the 3rd position on the page. (the user would indicate - through a parameter - what the starting postion would be)

    Hi Scott
    Create a user parameter that reads in the number of blanks you need to 'print' before starting the actual printing.
    In the Format trigger of the outermost frame of your report write code using SRW.SET_BEFORE_PRINTING_CODE.
    Loop this method based on the user parameter and call this method with skip-line-command of your printer as its argument.
    Regards
    Sripathy

  • Running more than one report at a time using Developer Suite 10g(10.2.1.0)

    Hi all,
    We are using the Developer suite 10g(10.2.1.0). I'm finding it exciting to work with it. I'm facing the problem with report server. For example I'm trying to run two reports at a time from two different locations, the report server starts working on first report and the second report will be in queue. In 6i it was not the case. so i need such a scenario. where in the two users can take the reports concurrently instead of this FIFO method.
    Regards,
    Alok Dubey
    Edited by: Alok Dubey on Dec 15, 2008 5:22 PM

    Hello,
    By default, the reports server is configured with 2 kinds of engines :
    The default reports engine and the "URL engine" :
    For more details about the "URL engine " :
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#i1007633
    3.5 Configuring the URL Engine
    Thie "URL engine" has a minEngine=0 and maxIdle=30 :
    <engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000"/>
    It means that if the "URL engine" is not used, it will be stopped after 30 minutes.
    That's why you can see 2 engines just after having started the reports server and only 1 engine 30 minutes later
    Regards

  • Satellite P300: cursor jumps to different positions while typing

    Hi All,
    i have a Satellite P300,
    I am having trouble when i type.
    When i am typing using the keyboard, the first couple of words are ok, but then the words start typing in the wrong place, eg back further into the middle of the sentence i am typing.
    Anybody please help? thanks

    Hi dude
    I had a similar issue.
    While typing the cursor jumped to different positions and I was not able to finish one sentence.
    I though there could be something wrong with the keyboard but finally I have notices that I have touched the touchpad surface accidentally while typing ?.
    I have disabled the touchpad using the Fn+F9 and the issues has gone
    So maybe its the same reason for you

Maybe you are looking for

  • Issue with migrated transformation rule after transport

    Hello all, We have migrated couple of update rules and transfer rules to transformation rules. All the transformation rules are active in development environment. The issue is when we transport these transformation rules to QA, one of the fields of d

  • Imac 10.6.8 will not sync with my iphone 4s 6.0.1.

    I have iMac 10.6.8 and this is the only update I can get apparently. I have an iPhone 4s 6.0.1. I can't get iCloud because I can't update to 10.7 on my iMac. Only some items sync and others get duplicated. Am i screwed or can I fix this? I rely heavi

  • No all-day events in iCal

    Hello everyone, I am experiencing some kind of bug in my Mavericks 10.9.2 iCal, where is field for all-day events completely empty. So no birthday or other events. Of course, the calendar account is checked and online, calendar is checked, birthdays

  • Change Table control Column Header text dynamically

    Hi, I have an requirement to change table control column header text dynamically. i.e. I have about 10 columns in table control, out that need to change 5 columns header text. These header texts are stored in an internal table. I had looked into the

  • Pages 2: PDF incompatibility issues

    I like to save work created with pages 2 as a PDF so I can read them on a windows box. Trouble is, they don't open on the windows box. Adobe reader states that there's a syntax error or corrupt file. It opens fine using adobe reader on the Mac. Any i