Starting AME in windows 8 gives error DVAAUDIOFILTERHOST.DLL is missing

Reinstalling the program as suggested by the error message is a problem since AME is not available as an app in the Creative Cloud.
What can I do?

launching AME with the shift-key down gave the same result DVAAUDIOFILTERHOST.DLL is missing. I then removed Premiere and After Effects and reinstalled them. Did not work.
Today I installed windows 8.1. Problem remained the same.
Again I reinstalled PPro and After Effects. Now I do not see an AME icon on the desktop anymore and when i export a sequence in Ppro I get the message there is an update available for adobe media manager- use the update tool in the help pull down. When I choose update it says that everything is up to date. Now when I try to export and queued it, it gives a box stating: preparing for export, followed by a box exporting, and then ...... nothing happens, it just goes back to the editing environment in PPro.
I spend many, many hours on this problem now and hope someone can help.

Similar Messages

Upon start up of my laptop I get a APS Daemon.exe system error - MSVCR80.dll is missing. This just started out of the blue. At one point it told me to reinstall ITunes. Is that truly necessary?

Upon start up of my laptop I get a APS Daemon.exe system error - MSVCR80.dll is missing. This just started out of the blue. At one point it told me to reinstall ITunes. Is that truly necessary?

I have the same issue after installing the new update and reinstalling iTunes doesn't fix the issue.
I found disabling Apple push (APSDaemon.exe) from the start up will stop the error from appearing, however this will disable wireless syncing. If you don't use it than it shouldn't be an issue.
I'm using a PC so you can disable it using the msconfig command and turning it off in the Startup tab. I don't know if Mac users are experiencing the same issue. Hopefully Apple will fix it in their next update.

Error:MSVCR80.dll is Missing

I have tried to update my iTunes as prompted, but it did not install-Then I get this message: Program can't start because MSVCR.dll is missing from my computer. Try reinstalling the program to fix this problem. I also get: iTunes was not installed correctly-reinstall iTunes-ERROR 7 (windows error 126)
I am not that good at doing this kind of thing. I have checked out the internet and their are so many things you can try-but don't trust. Can someone please help me with this as i just want to listen to my tunes while I do research on my computer.....I have windows 7.

iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

After latest itunes update, cannot run itunes: get error MSVCR80.dll is missing. What to do?

Tried uninstalling all apple programs, and downloading and reinstalling itunes. But itunes did not install correctly, and it tells me to reinstall. And if I click on the itunes icon I again get the error message than MSVCR80.dll is missing. (This is on my Windows 7 machine.)

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99890)

Iphone not showing up in itunes even tried recoveing it but windows 7 gives error 43 if i restart it the apple logo appears and it does not go any further... tried booting tethered aswell with redsnow!!... but still doest respond.. what should i do??

PLEASE HELP!! My mom is gonna kill me.. Tried recovering(restoring) with other pc's aswell but itunes does not show any message or any error (nothing)...Only the windows gives the message (Unknown Device) error 43.

Jailbreaking may or may not be legal, but either way it voids your warranty and cannot be discussed in an Apple hosted forum. When you jailbreak a phone you are giving up all Apple support. You are on your own, and will have to use non-Apple resources to resolve the problem.

OCI - Sample program works on Windows but gives error in Solaris ??

Hi,
I am new to OCI. I was trying the following sample program:
#include<iostream>
#include<conio.h>
#include<firstheader.h>
//#include<stdafx.h>
#include<string.h>
using namespace std;
class OCIClass
public:
 OCIClass()
int p_bvi;
char p_sli[20];
int rc;
char errbuf[100];
int errcode;
const char *s;
printf("Hello\n");
string sql;
string sql2="select substr(ename,1,3) from emp where job='ANALYST'";
cout<<sql2;
//char sql[512];
int flag=0;
sql += "SELECT * from emp where job='";
if (flag==0)
sql += "MANAGER";
else
sql += "ANALYST";
sql += "'";
cout<<sql + "\n";
s=sql.c_str();
char* cstr = new char[sql.size()+1];
strcpy (cstr, sql.c_str());
char* cstr2 = new char[sql2.size()+1];
strcpy (cstr2, sql2.c_str());
sql=" ";
/* Initialize evironment */
rc=OCIEnvCreate((OCIEnv **)&p_env,(ub4)OCI_DEFAULT ,(void *)0, (void * (*)(void *, size_t))0,
(void * (*)(void *, void *, size_t))0,(void (*)(void *, void *))0,(size_t)0, (void **)0);
/* Initialize handles */
rc = OCIHandleAlloc( (dvoid *) p_env, (dvoid **) &p_err, OCI_HTYPE_ERROR,
(size_t) 0, (dvoid **) 0);
printf("Error handle allocated\n");
rc = OCIHandleAlloc( (dvoid *) p_env, (dvoid **) &p_svc, OCI_HTYPE_SVCCTX,
(size_t) 0, (dvoid **) 0);
printf("service handle allocated\n");
printf("Value of RC before Logon\n %d", rc);
/* Connect to database server */
rc = OCILogon(p_env, p_err, &p_svc, (OraText *)"scott", 5,(OraText *) "welcome", 7,(OraText *) "", 0);
printf("Value of RC after Logon\n %d", rc);
if (rc != 0) {
OCIErrorGet((dvoid *)p_err, (ub4) 1, (text *) NULL, &errcode, (OraText *)errbuf, (ub4) sizeof(errbuf), OCI_HTYPE_ERROR);
printf("Error - %s\n",errbuf);
 printf("error");
//exit(8);
 getch();
printf("Connect successful\n");
/* Allocate and prepare SQL statement */
rc = OCIHandleAlloc( (dvoid *) p_env, (dvoid **) &p_sql,
OCI_HTYPE_STMT, (size_t) 0, (dvoid **) 0);
rc = OCIStmtPrepare(p_sql, p_err, (OraText*) cstr,
(ub4) 37, (ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT);
/* Bind the values for the bind variables
p_bvi = 10; /* Use DEPTNO=10
rc = OCIBindByName(p_sql, &p_bnd, p_err, (text *) ":x",
-1, (dvoid *) &p_bvi, sizeof(int), SQLT_INT, (dvoid *) 0,
(ub2 *) 0, (ub2 *) 0, (ub4) 0, (ub4 *) 0, OCI_DEFAULT);*/
/* Define the select list items */
rc = OCIDefineByPos(p_sql, &p_dfn, p_err, 1, (dvoid *) &p_sli,
(sword) 20, SQLT_STR, (dvoid *) 0, (ub2 *)0,
(ub2 *)0, OCI_DEFAULT);
/* Execute the SQL statment */
rc = OCIStmtExecute(p_svc, p_sql, p_err, (ub4) 1, (ub4) 0,
(CONST OCISnapshot *) NULL, (OCISnapshot *) NULL, OCI_DEFAULT);
while (rc != OCI_NO_DATA) { /* Fetch the remaining data */
printf("%s\n",p_sli);
rc = OCIStmtFetch(p_sql, p_err, 1, 0, 0);
printf("After fetch\n");
rc = OCILogoff(p_svc, p_err); /* Disconnect */
rc = OCIHandleFree((dvoid *) p_sql, OCI_HTYPE_STMT); /* Free handles */
rc = OCIHandleFree((dvoid *) p_svc, OCI_HTYPE_SVCCTX);
rc = OCIHandleFree((dvoid *) p_err, OCI_HTYPE_ERROR);
void main()
OCIClass c1;
getch();
The above program works on my Windows desktop. If I try this in Solaris, OCILogon fails and gives an error. If I check the value of rc, I find that it is -2. I can connect to the database using SQLPlus, but not through the program. Not sure how to debug this...
Any pointers ?
Thanks in advance,
mrk

Did you make the required port entry in the /etc/services file? You will need to add the gateway service port there. Then try to run your program.
T00th

J2EE engine does not start and then visual administartor gives error

I am trying to start the SAP J2EE GUI after entering User J2EE_ADMIN and
password it hardly goestill 5% and gives following task error:
"com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
create new RemoteLoginContext".
I have also applied 701654 as suggested by you earlier but I have never
changed the password, However I have updated the Secure storage also
using configuration tool.

I am trying to start the SAP J2EE GUI after entering User J2EE_ADMIN and
password it hardly goestill 5% and gives following task error:
"com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
create new RemoteLoginContext".
I have also applied 701654 as suggested by you earlier but I have never
changed the password, However I have updated the Secure storage also
using configuration tool.

Windows XP gives error when loading iTunes

I installed iTunes version 10.5.2.11 on my Windows XP Service pack 3 box. After installation I double click the icon on my desktop and I get the "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience" error message. All I can do is click send report or don't send report and Itunes will never open.

After installation I double click the icon on my desktop and I get the "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience" error message.
Generate another of those error messages and click the "Click here" link in the error message box. What modname and modver are showing for the error? (Precise spelling please.)
If the error is a BEX and thus doesn't show an modname or modver, let us know what P1 through P9 items are showing for you instead.

My Airport Express will not stream music to my remote speakers through the laptop (windows Vista), gives error code -15000. Works fine from my IPAD and Ipod. Any thoughts, suggestions?

Itunes is throwing a -15000 error code on my Windows vista. Ipad and Ipod work great for streaming to remote speakers, trying to use the computer and it throws the error code.
Any thoughts? I've rebooted the laptop, modem, and AE, even plugged in the laptop recommended by other users, still nothing.

the following is for W7 but might work for you:
Fix for error -15000 Remote speakers on iTunes / Windows 7

Windows 7 itunes error msvcr80.dll missing - how can I repair or fix to open itunes

I have uninstalled and installed itunes a number of times and I continue to get the same error message - making it impossible to open itunes on my Windows 7 pc. I have run out of my bag of tricks. How can I once again get itunes to run and work to access songs and connect my apple devices?

This also 100% work
Removing and reinstalling iTunes and other software components
If applicable, disconnect any iPod or iOS device and close Microsoft Outlook.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later).
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (see note 1 below)
iCloud (if present)
MobileMe (if present) (see note 2 below)
Bonjour
Apple Application Support
Reboot your computer. Delete any of the following folders where they can be found: (see note 3 below)
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iPod
C:\Program Files\iTunes
also on 64-bit systems:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple
C:\Program Files (x86)\iPod
C:\Program Files (x86)\iTunes
Download the iTunes setup file and run it to install. Use an account with administrative rights. This can usually be achieved by right-clicking on the downloaded file and selecting Run as... or Run as Administrator. In some cases a combination of Shift or Ctrl keys may be required for the option to show, or it may not be necessary.
If you deleted iCloud and reinstalling iTunes doesn't automatically reinstall it visit iCloud Control Panel.

I am Using Itunes For Windows and have my entire music library synced on the laptop. When i tried upgrading to the new version i am getting a system error "MSVCR80.dll file missing". My itunes refuses to open.I have many playlists and songs which i want

1. how Do I solve this issue.
2. How do I ensure that i do not lose my playlists along with the songs.
3. What is the procedure needed to be followed.

Ok, I had a glitch, forced to restart, and lost my train of thought.
Reinstalling iTunes should fix the major issue that might have gone wrong, perhaps your explaination points will disappear and everything will be peachy again.
But if they don't, you can open the XML file in iTunes Folder using a Text edit program to see what the common pathname is to the iTunes Music folder or where your content is located.
If you moved the itunes folder, it needs to go back.
I can't download iTunes to my Vista virtual machine to test it out right now because iTunes is down, so I can't verify the pathname, perhaps your issue and the iTunes being down are related somehow?
You don't want to import all your music again, but it's a option, but you lose all your playlists, that's what I'm trying to recover.
If oyu don't have a whole lot of playlists, then simply select all the explaimation point music and delete, select File from the menu and import your itunes folder again.

Svchost.exe - System error - "xul.dll is missing from your computer" need help resolving, I have uninstalled software 5 times, deleted folders, cleaned Mozilla entries out of registry and still get same message - aghhhhhhh!

get the message every time I login - when firefox is installed and even after it has been uninstalled

Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
tt2

When starting InDesignCS2 received new error message -- InDesign is missing required system fonts or

We are not able to start Indesign CS2 without getting the error message: <<InDesign is missing required system fonts or CMap files. Please reinstall InDesign.>> This is on WinXP. Recently I installed Creative Suite CS4. It took almost a day to install. The installation kept on stopping. Each time we were able to install one more program. After checking all of the programs we discovered that Firefox would not start due to a possible font error. After reading many posts I decided to uninstall a lot of fonts since I did not know which one was the culprit. However now I am missing a font (at least I hope that this is caused by a missing font and not anything else) that should be there and I don't know which one it should be. I did uninstall a <lot> of fonts and don't remember which ones. WE did uninstall all CS2 programs and then reinstalled only the necessary three. However that did not make any difference. Any ideas and suggestions would be welcome Thanks Pia Pehtla

A forum search for "missing required fonts" brings up this thread which should solve your problem:
http://www.adobeforums.com/webx?128@@.3bbdb0a7
Peter

CS3, MFC70.dll is missing JS Error - AQW.js, TypeError:AdvancedQueryWizard.preload is not a function

Hi guys,
BE SURE TO READ THE UPDATE BELOW....
I have searched both Google and the Forums, but cannot find anything on this one. Here is the history and both errors:
Recently upgraded to new machines with an upgrade to Windows 7 from XP prof. I personally installed the CS3 (web premium, upgraded from previous version) and all went well. The only change was that I did not install all of the previous versions of Dreamweaver, like I had on my old PC. I opened DW, pulled in all of my websites from the backup (work as a web developer/graphics designer) and all worked fine.
I left for Christmas vacation, remoted in a few times, so I know my laptop was fine, never lost power, etc., but never did have to open DW during that time.
Got back this week, had to make a change to a page that contains the XMLFlashSlideshow (v3). Opened Dreamweaver and got the first of two errors: "MFC70.DLL is Missing" The message indicated a reinstall would take care of the problem. I clicked ok, and then I got this error message:
While executing onLoad in AQWLoad.htm, the following JavaScript error(s) occured:
At line 60 of file "C:/Program Files (x86)\Adobe\Adobe Dreamweaver CS3\Configuration\Startup\..\Shared\AQW\AQW.js": TypeError:AdvancedQueryWizard.preload is not a function
When I clicked OK, the message appeared again immediately. I clicked ok again, and Dreamweaver began to open.
I figured I could make the change and troubleshoot after, but when I went in, I could not longer see the box I normally see to click on to edit for the slideshow. These error messages occur every time I open Dreamweaver, even after a reinstall. I did not have this page, nor even this site as the default when first opening DW when the errors first occurred.
UPDATE: These errors do not seem to occur the first time Dreamweaver is run, be do occur each time afterwards.
I have also noticed that I cannot print from Word 2007 to the Adobe printer driver as I always have. Not sure if that is related or not.
Any ideas, anyone else run into this?
Thanks for anything help you can send my way.
Thanks,
Suzanne

For the JS error: http://kb2.adobe.com/cps/405/kb405604.html
If mfc70.dll is really missing, that is a core Windows file. If you need to fix that you need to have your Windows 7 disc ready and run "sfc /scannow" in the command prompt. You may need your Windows 7 if the file cannot be repaired and has to be restored. This can affect all aspects of your system and not just Dreamweaver if there is really a problem there.
The Word -> Adobe Printer is another issue. You may want to post that in the Acrobat forums along with the version of Acrobat Professional you are using.

Hi folks! When I try to run BF3, i get this error at startup - d3dcompiler_43.dll is missing, why?

Product Name and Number:
HP Pavilion DV7-6151
OS:
Windows 7, 64-bit
Error message:
When I try to run Battlefield 3, I get this error d3dcompiler_43.dll is missing, anyone know what to do?
I bought the laptop 4 days ago, and I have made no changes to is, its fresh from the factory.
I hope you can help me out
This question was solved.
View Solution.

Hi,
On the BF3 CD, there should be a folder called DirectX. Use it to reinstall the directX runtime files.
Else, you may get it here
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2da43d38-db71-4c1b-bc6a-9b6652cd92a3&dis...
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Starting AME in windows 8 gives error DVAAUDIOFILTERHOST.DLL is missing

Similar Messages

Maybe you are looking for