Starting AMT FailedI am facing the same issue while opening AMT/Mobile Sale
Hi All,
I am facing a issue while opening AMT/Mobile Sales Appl/System Maintenance. I am getting the error saying 'UI_CORE_APPL_LAUNCH_FAILED_STA'. Could anyone out there please tell me how to resolve this issue?
I checked the UID and PWD under HKEY_LOCAL_MACHINE\SOFWARE\SAP\MSA\MW\secutiry for IDES DB and they are consistent with the ODBC parameters for IDES.
Much appreciated,
Karuna.
Hi All,
my issue is resolved. The problem with my issue was the missing entry in the table SMO_AUTH_SYS. I found the note 687679 and ran the report according to it. With that table SMO_AUTH_SYS was populated with the record. Later i was able to connect to AMT and gave the standard role SAP_AMT_USER and since then i am able to log into MSAA application and also MSY application
My issue is resolved. Thanks for everyone who tried to help me out.
Thanks,
Karuna.
Similar Messages
-
I'm getting S.M.A.R.T. error when trying to install Mountain lion. Hard drive works pretty well despite the Failing status. I understand that many users have been facing the same issue. My hard drive was/is working perfectly. Has Apple patched it yet?
Has someone found a solution which is not replacing the hard drive which works just fine? Or Is anyone aware of a procedure that can force the installation despite the S.M.A.R.T error? Below details of my hard drive
Thanks
ST31******ASQ:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: ST31000528ASQ
Revision: AP24
Serial Number: 6V***5JR
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Rotational Rate: 7200
Medium Type: Rotational
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Failing
<Edited By Host>If you haven't done so, run Disk Utility /Applications/Utilities
to run a live verification.
The drive may be ok at the moment, but that's not to say the drive may fail at anytime.
Hopefully you have all your important data backed up just in case. -
I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app? Anyone facing the same issue..
I have a 4S and upgraded to iOS 6 last week without any issues.
Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)? -
After update my macbook takes lot of time to start and shut down , its kind of annoying and suddenly it also changed the system date n time .
Try:
Mac Mini (Core i5)is very slow, not very responsive.
BTW, this is the Mac Pro desktop forum -
iPhone 6 (iOS 8.1.2) My wife and I were able to log into iCloud when we bought and activated the phones. In the last 2 days, we have not been able to do so. Have reset the password 3 times. Can get into iTunes and iCloud via MacBook Pro. Every attempt to log in via iPhone we get a message saying the password is incorrect. I noticed someone else had a similar problem about 1 hour ago. Apple support's answer did not fix the problem for them.
have you managed to fix that? i'm facing the same issue on iPhone 6 (8.1.3)
-
Cache issue while opening an attachment
Hi,
We are facing the cache problem while opening an attachment in the webdynpro application.
When we clear the cache of the browser, then we are able to open the attachment.
Can we prevent this from the application side.
All the attachments are stored in the backend (CRM) system.
Regards
MQHi,
We are facing the cache problem while opening an attachment in the webdynpro application.
When we clear the cache of the browser, then we are able to open the attachment.
Can we prevent this from the application side.
All the attachments are stored in the backend (CRM) system.
Regards
MQ -
this message appear when I launch any program within the CS3 suite
AMT subsystem failure. The licensing subsystem has failed catastrophically you must reinstall or call customer support. I call automated system which refers me to this site. I have reinstalled with the same issues not sure what else to do?Try this Help article
Error: "The licensing subsystem has failed catastrophically." when you start a Creative Suite 3.x application
Nancy O. -
I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Are all New iPad facing the same overheat issue?
My new iPad (wifi 64G) also feels warm at the back.It varies. The difference between 'warm' and 'hot'. As in warmer but I can touch it vs too hot to comfortably handle.
ANd it doesn't seem to be all new iPads. There does seem to be increased heat because of the different battery and the retina display as explained above. There also seems to be some of them - maybe a few from a singular batch/factory that seem to put out what has been termed excessive heat. I would think if it were a universal issue then there'd be something more aggressive being done.
You can always take it into your local apple store and have them look at it and document that you have a concern, but they may say it's just normal heat associated with the prettier display and new battery configuration. -
I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?
Thanls Ernie. I found the solution. My problem was previous to 10.10.3. It looks like the installation of final cut and uninstallation of fcp delte a plugins that was needed for Aperture. I recover from time machine my plugins in Library/frameworks/plugin.manager.framework and now Aperture works ! Ouf....
-
Re complaint for the same issue
Below is the issues that I am facing and I mail to lenovo many times but no response from lenovo care, now the issues are getting worse and worse as jut three to\two days back my lenovo kick get shutdown and stuck on Intel logo and then I go to service center located at Nehru place in new Delhi they open my phone and install new software now I just don't know why to install software they open my phone and from that t\day when my phone reaches to 15% to 10 % battery level phone get blank instantly then I have to plug in the charger to again switch it back , this phone is the lenovo flagship model and I purchased two phone same time both phone get replaced one times but the one phone is working fine and but one phone having this serious issue and when I go to service station they every time says that u have to leave phone for two weeks for at least why the dammn I leave my phone to service center for two weeks just for diagnosing the issue without phone there are lots of trouble I have to face in my daily life please look into this matter , as if this matter not resolve by lenovo as soon as possible I definitely go to file a case against lenovo in consumer court, ---------- Forwarded message ---------- From: Lencare <[email protected]> Date: Mon, Dec 23, 2013 at 5:23 PM Subject: RE: re-complaint about the same issue To: MIDH Care <[email protected]> Cc: "******@gmail.com" <******@gmail.com>, "[email protected]" <[email protected]> Hi Team, Please find the E-Mail below, request you to do the needful. __________________________________________________________ Thanks & Regards, Lenovo Customer Care, India. Please note that any E-Mails with attachments exceeding 10 MB will not reach us due to limitation in the Attachment Size. From: PranjalOctane [mailto******@gmail.com] Sent: Monday, December 23, 2013 12:00 PM To: [email protected]; [email protected]; MIDH Care Subject: re-complaint about the same issue my name is ranjal dutt i purchased lenovo k900 serial number is ****** the issue is that this phone is i am using replaced once just because of the heating and low battery issue , now after replacing and using it after some days i am facing the problems again , the same with some new ones the problems are listed below: 1.low battery backup 2.heating issue 3.hang 4.screen flicker i am using this phone and i am getting only 5 to 6 six hrs of battery backup , and with heating issue , when i am browsing internet or playing any kinda video it get heats so much and battery drains so fast for me it is pain when i ma in need of clicking some pics or surf to internet as there is very low battery backup , my friend also brought this phone with me on same day they also have this same issue but after replacing his phone the problem get solved , kindly see on my issue as if this issues persists again and again how can we refer lenovo phones to other persons ******
Moderator note: personal information and serial number removed for member's protection.why no body here fo replying my issue..........is lenovo is such a bad company
-
I updated my iphone 5 to iOS7 and it no longer works with my car's stereo. My boss is having the same issue. Anyone else? Ideas on how to resolve this?
More details would ne nice such as what make of car?
When I upgraded to my iPhone 5, a friend was complaining that his iPhone 5 did work in his car. I took the Apple 30 pin to Lightning adapter out of my car and replaced his third party one and it started working.
Allan -
Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?
There is another setting for "Start Conversation from", that needs to be set to phone number.
-
qHow do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?
For what it is worth I have noticed a similar issue from the iPad3 while at work and home. At work we have two Apple TV 3rd Generation installed and tied to our A/V system. I believe the issue has to do with a timeout on the broadcast saying "here I am" and allowing devices to connect.
For example:
At work we have several Wi-Fi SSID being broadcast from Cisco APs. The only one we can use with the Apple TV is the one that uses a WEP since the others are either setup to be hidden, require web page authentication, or have a login requirement from employees. Essentially, what I believe the issue is that the Apple TV periodically broadcasts a message to other iOS devices that support Mirroring. When the Apple TV does not get a response from a device it goes into a dormant mode and requires either a command from the remote control or a reboot. This has been tested with both the power management enabled and not enabled with the same results.
As for when I come home, the Apple TV3 has not seen the device in some time and therefore is not broadcasting it's location information. A simple click of the circle or menu keys on the remote will give it the command to start broadcasting again and allow the iPad3 to see the Apple TV. When trying to Home Share the computer can not play (iTunes 11, Win8RTM) until the Apple TV is awoken then it will show up for mirroing.
This may or may not assist you but, it hopefully explains how the issue may be happening. -
I have spent too much time on the same issues. Will the issues ever be resolved?
i'm also having major CPU problems w/ FF 29.0.1. when i restart the app it calms down again but after loading tabs it steadily climbs up to 100% after not too long. i have checked out the 2 CPU links/articles above and do all the basic troubleshooting and tips, but with all the FF tools & add-ons isn't there some sort of CPU monitor that has the ability to display which extensions/scripts are hogging the CPU? Activity Monitor on Mac just shows the total used by the app. it's impossible in my case to efficiently disable dozens of add-ons & scripts, restart, and test each one by one b/c it can take several hrs before the CPU starts to spike high again. i have no time for this.
thanks
Maybe you are looking for
-
I have gone through all the tutorials to get iCloud to back up my music for iTunes, but it still shows I have 5.0GB available (even though I have purchased more), and when I go to "backup" it acts like it's going to do it, but doesn't. I now need to
-
I have a new version of iTunes on my computer & copied some music albums into iTunes...but I cannot transfer/copy these albums to my iPod Touch. How do I do that? P. Kraus
-
Hi, I have a a DAG with 4 MBD, and all look ok however one specific MDB003 is churning out lots and lots of logs, 20GB compared to 0.5GB on all other MDB and mailboxes are shared. How do I best pin point the exact issue as to why this single MDB is
-
Hi Colleagues, We have a requirement in which we have to dynamicaaly hide a tab on a screen that uses FPM. We were able to disable the tab but we did not find any option to hide/remove tab provided by FPM. regards ashish
-
Touch Smart Web use no longer available?
When did the Touch Smart Web apps stop being supported? It ays the internet isn't connected - but it is.