Starting analytics

Hai Experts,
Im New to OBIEE 11g ,
Im started all services then im trying to analytics using the following URL
http://localhost:7001/em
My firefox Browser showing follwing error "Unable to connect,"
Edited by: Ashok on Mar 19, 2012 12:16 PM

Console Also same problem,
Im Started all Services Using OPMNCTL by using command promt,
All are Alive,
But the Problem is Console,Em,Analytics are Connected In the Browser

Similar Messages

Error 500 on starting analytics

Hi,
I'm running OBISE1 in a VMware for testing. Last week I build a repository and created some views with answers and put it into my dashboard. Everything was fine. Now I can't start analytics anymore. The server is running. It doesn't matter what address I use I always got a http 500 error. Normally I'm using the localhost address. I also tried the IP and the computer name:
http://localhost:9704/analytics
http://orabi:9704/analytics
http://orabi.ctnet:9704/analytics
http://192.168.111.48:9704/analytics
http://127.0.0.1:9704/analytics
Very stange is that I got the same problem in a other VMware. There where not changes on our network over weekend. Any ideas hat happend?

Just some ideas...
clear the cache for the browsher.
restart all services
check server logs
and check in the xml,the way that you describe the server(with name or ip?)
last,i believe that you are trying to access analytics from the vware and not from your pc...
i hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Error starting analytics - OBIEE 11.1.1.6 on Windows 7 64bit

Hello All -
I installed OBIEE 11.1.1.6 on Windows 7 64bit with out any errors. I am facing problem starting up the analytic's page, It is struck at the 500 Internal server error page. I opened up the enterprise manager to check whether all the services are up and running, but i found one of the service is down making it to 67-33%. BI Core application is down and when I opened it, all the services are down. BI server, BI presentation services, BI scheduler..all are down. I tried to restart all the services but in vain.
I have installed Loopback adaptor before staring the OBIEE installation, Checked the host file to have the ip address and machine name, Checked the OPMN status via cmd, all are alive. I am unable to figure out why I am getting this error. Below is the log file
Any help is greatly appreciated...Thanks for your time..
ECID     bc7431c56d947d4e:-8f79716:137ed97154c:-8000-0000000000000135
Message     OPMN.queryProcessStatus failed with the following exception
Supplemental Detail     oracle.as.management.opmn.optic.OpticBadConnectException: Could not get secure socket for host 10.0.0.6 and port 9501
at oracle.as.management.opmn.optic.OpmnSSL.getSecureSocket(OpmnSSL.java:52)
at oracle.as.management.opmn.optic.OpmnPhone.dialOpmn(OpmnPhone.java:733)
at oracle.as.management.opmn.optic.OpmnPhone.getSocketForCall(OpmnPhone.java:455)
at oracle.as.management.opmn.optic.OpmnPhone.makePhoneCall(OpmnPhone.java:315)
at oracle.as.management.opmn.optic.OpmnPhone.request(OpmnPhone.java:270)
at oracle.as.management.opmn.optic.OpmnQuery.getBuf(OpmnQuery.java:482)
at oracle.as.management.opmn.optic.OpmnQuery.getDom(OpmnQuery.java:602)
at oracle.as.management.opmn.optic.OpmnQuery.getProc(OpmnQuery.java:750)
at oracle.as.management.mbeans.opmn.Opmn.queryProcessStatus(Opmn.java:328)
at oracle.as.management.mbeans.opmn.Opmn.getStatus(Opmn.java:85)
at oracle.as.management.mbeans.opmn.Opmn.getStatus(Opmn.java:75)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java:93)
at com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java:27)
at com.sun.jmx.mbeanserver.MBeanIntrospector.invokeM(MBeanIntrospector.java:208)
at com.sun.jmx.mbeanserver.PerInterface.getAttribute(PerInterface.java:65)
at com.sun.jmx.mbeanserver.MBeanSupport.getAttribute(MBeanSupport.java:216)
at javax.management.StandardMBean.getAttribute(StandardMBean.java:358)
at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doGetAttribute(OracleStandardEmitterMBean.java:737)
at oracle.adf.mbean.share.AdfMBeanInterceptor.internalGetAttribute(AdfMBeanInterceptor.java:72)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doGetAttribute(AbstractMBeanInterceptor.java:86)
at oracle.as.jmx.framework.generic.spi.security.AbstractMBeanSecurityInterceptor.internalGetAttribute(AbstractMBeanSecurityInterceptor.java:127)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doGetAttribute(AbstractMBeanInterceptor.java:86)
at oracle.security.jps.ee.jmx.JpsJmxInterceptor$GetAttributeDelegator.delegate(JpsJmxInterceptor.java:843)
at oracle.security.jps.ee.jmx.JpsJmxInterceptor$7.run(JpsJmxInterceptor.java:747)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.jmx.JpsJmxInterceptor.jpsInternalInvoke(JpsJmxInterceptor.java:768)
at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalGetAttribute(JpsJmxInterceptor.java:230)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doGetAttribute(AbstractMBeanInterceptor.java:86)
at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalGetAttribute(ContextClassLoaderMBeanInterceptor.java:66)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doGetAttribute(AbstractMBeanInterceptor.java:86)
at oracle.as.jmx.framework.generic.spi.interceptors.MBeanRestartInterceptor.internalGetAttribute(MBeanRestartInterceptor.java:67)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doGetAttribute(AbstractMBeanInterceptor.java:86)
at oracle.as.jmx.framework.generic.spi.interceptors.LoggingMBeanInterceptor.internalGetAttribute(LoggingMBeanInterceptor.java:291)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doGetAttribute(AbstractMBeanInterceptor.java:86)
at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.getAttribute(OracleStandardEmitterMBean.java:716)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:666)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:157)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
at weblogic.management.mbeanservers.domainruntime.internal.ManagedMBeanServerConnection.getAttribute(ManagedMBeanServerConnection.java:304)
at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.getAttribute(FederatedMBeanServerInterceptor.java:308)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:157)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
at oracle.as.jmx.framework.generic.BaseMBeanServerInterceptor.getAttribute(BaseMBeanServerInterceptor.java:185)
at oracle.bi.management.adminservices.opmn.OpmnProcessController._isOpmnRunningWithProcesses(OpmnProcessController.java:636)
at oracle.bi.management.adminservices.opmn.OpmnProcessController.startThreadProcesses(OpmnProcessController.java:304)
at oracle.bi.management.adminservices.opmn.OpmnProcessController.startAll(OpmnProcessController.java:220)
at oracle.bi.management.adminservices.model.impl.ProcessManagerProxyImpl.startAll(ProcessManagerProxyImpl.java:144)
at oracle.bi.management.adminservices.mbeans.impl.BIInstanceMBeanImpl.startSystemComponents(BIInstanceMBeanImpl.java:409)
at oracle.bi.management.adminservices.mbeans.impl.BIInstanceMBeanImpl.localStart(BIInstanceMBeanImpl.java:307)
at oracle.bi.management.adminservices.mbeans.impl.BIInstanceMBeanImpl.start(BIInstanceMBeanImpl.java:246)
at oracle.bi.management.adminservices.mbeans.impl.BIInstanceMBeanImpl.start(BIInstanceMBeanImpl.java:284)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doInvoke(OracleStandardEmitterMBean.java:1012)
at oracle.adf.mbean.share.AdfMBeanInterceptor.internalInvoke(AdfMBeanInterceptor.java:104)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
at oracle.as.jmx.framework.generic.spi.security.AbstractMBeanSecurityInterceptor.internalInvoke(AbstractMBeanSecurityInterceptor.java:190)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
at oracle.security.jps.ee.jmx.JpsJmxInterceptor$2.run(JpsJmxInterceptor.java:358)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalInvoke(JpsJmxInterceptor.java:374)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalInvoke(ContextClassLoaderMBeanInterceptor.java:103)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
at oracle.as.jmx.framework.generic.spi.interceptors.MBeanRestartInterceptor.internalInvoke(MBeanRestartInterceptor.java:116)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
at oracle.as.jmx.framework.generic.spi.interceptors.LoggingMBeanInterceptor.internalInvoke(LoggingMBeanInterceptor.java:524)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.invoke(OracleStandardEmitterMBean.java:924)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:349)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.invoke(JMXContextInterceptor.java:263)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterceptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:65)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:444)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:323)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11$1.run(JMXConnectorSubjectForwarder.java:663)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11.run(JMXConnectorSubjectForwarder.java:661)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.invoke(JMXConnectorSubjectForwarder.java:654)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1427)
at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265)
at java.security.AccessController.doPrivileged(Native Method)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:788)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222)
at javax.management.remote.rmi.RMIConnectionImpl_1035_WLStub.invoke(Unknown Source)
at weblogic.management.remote.common.RMIConnectionWrapper$16.run(ClientProviderBase.java:919)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.security.Security.runAs(Security.java:61)
at weblogic.management.remote.common.RMIConnectionWrapper.invoke(ClientProviderBase.java:917)
at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:993)
at oracle.sysman.emai.model.bi.impl.JmxUtil.invokeMethod(JmxUtil.java:184)
at oracle.sysman.emai.model.bi.impl.InstanceMBeanHelper.start(InstanceMBeanHelper.java:126)
at oracle.sysman.emai.model.bi.impl.InstanceModelAdaptor.start(InstanceModelAdaptor.java:319)
at oracle.sysman.emai.view.bi.SystemStartStopView.start(SystemStartStopView.java:46)
at oracle.sysman.emai.view.bi.AvailabilityView.startAllComponents(AvailabilityView.java:255)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.sysman.emas.sdk.progress.WorkWrapper.run(WorkWrapper.java:96)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.net.ConnectException: Connection timed out: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect(SSLSocketImpl.java:564)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.<init>(SSLSocketImpl.java:365)
at com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl.createSocket(SSLSocketFactoryImpl.java:71)
at oracle.as.management.opmn.optic.OpmnSSL.getSecureSocket(OpmnSSL.java:48)
... 144 more
=================================================================================
Supplementary information regarding operation: ORACLE_INSTANCE:-:instance1;FAILED_CONTACTING_OPMN;Failed contacting OPMN, Please check if OPMN process is running. Cannot start or stop components of BI Instance.
=================================================================================

Hi,
It look like port conflict issue.
Root Cause
The port, identified in the AdminServer-diagnostic log:
OPMN.queryProcessStatus failed with the following exception
[[ oracle.as.management.opmn.optic.OpticBadConnectException: Could not get secure socket for host slvgqa58.company.com and port 9501
at oracle.as.management.opmn.optic.OpmnSSL.getSecureSocket(OpmnSSL.java:52)
was fouled by a another process.
Solution
Clear the port, by using the netstat command (i.e. netstat -anp grep 9501) to identify the processes running on the specified port, and then kill those processes.Once the processes were terminated, all BI components, on both servers in the cluster, started successfully.
Thanks
Deva

Migrating repositories from Solaris to Linux

Hi All
I have a requirement to migrate Repositories from Solaris to Linux...
Has anybody done it?
OR
Any ideas would be appreciated.
Regards

Hi,
I'm currently working with Analytics on UNIX
(Solaris) and perform actions similar to yourself:
1. Develop RPD in Windows (Analytics Admin Tool)
2. Post to server (here I use an S/FTP-emulation tool such as WinSCP/Core
FTP), this handles any conversion of the file needed, i.e. to UNIX version.
3. Start Analytics services.
In your case :- Open Solaris server via ftp and copy your Solaris rpd in window system then again try to login linux via ftp paste the related folder. FTP software like (Winscp software am using)
There is no much complex in this migration.
Hope this help's
Thanks,
Satya

OC4J when started as Win Service does not map URL for analytics website

Hi All,
When OC4J is started as a console and user enters the URL http://server-1/analytics it is automatically mapped to URL http://bof-iclu-1/analytics/saw.dll?Dashboard and we get the dashboard login page displayed.
Now I have created a Windows Service to Automatically start the OC4J serivce.
When OC4J is started as a service and user enters the URL http://server-1/analytics it does not map to the Dashboard URL and we get the website cannot display the page. However entering the complete URL http://server-1/analytics/saw.dll?Dashboard the login page is displayed.
I believe the issue is cause by the OC4J being started as a service and not as a console start.
Any idea what the issue could be?
Do I need to change any of the configuration xml files?
Where do the configuration setting for website mapping and welcome files is mentioned in the Oc4j?
Any help is greatly appreciated.
Best Regards
B

This is not going to help but you shouldn't be using OC4J for anything other than development.

OBIEE 11G OEL5.5 app deployments like analytics, bipublisher not starting.

Ok, I successfully installed OBIEE 11.1.1.3.0 on OEL 5.5 without any errors.
I was also able to log on to
1) http://myhostname:7001/console
2) http://myhostname:7001/em
3) http://myhostname:9704/analytics
I did not notice any errors, everything was running beautifully.
I decided to reboot and try to start up all the services. Here is what I did:
1. MYOBIEEPATH/user_projects/domains/bifoundation_domain/bin/startWebLogic.sh
2. MYOBIEEPATH/wlserver_10.3/server/bin/startNodeManager.sh
3. MYOBIEEPATH/user_projects/domains/bifoundation_domain/bin/startManagedWebLogic bi_server1 http://myhostname:7001
4. MYOBIEEPATH/instances/instance1/bin/opmnctl startall
I then went to verify that everything started up correctly.
1. went to http://myhostname:7001/console ..... looks good.
2. MYOBIEEPATH/instances/instance1/bin/opmnctl status
coreapplication_obiccs1 .... alive
coreapplication_obisch1 .... alive
coreapplication_obijh1 .... alive
coreapplication_obips1 .... alive
coreapplication_obis1 .... alive
3. went to http://myhostname:7001/em
The farm_bifoundation_domain had 62% up and 38% down.
analytics down
biadminservices down
bimiddleware down
bioffice down
bipublisher down
bisearch down
mapviewer down
basically everything important.
I went to http://myhostname:9704/analytics and got a 404 error.
I also noticed in obiee em, the farm_bifoundation_domain did not have "Business Intelligence/CoreApplication" child.
Not sure where to go from here. I would greatly appreciate any suggestions on where to start.
Thank you.

Hi
Have you find a solution ?
I have similar problem, when i restart service oracle BI, bi_server start to 50%
when i start bi_server i have this messages :
Exception while starting server 'bi_server1'
AND
Echec de l'obtention de Messages pour la cible
/Farm_bifoundation_domain/instance1/coreapplication_obis1,
/Farm_bifoundation_domain/instance1/coreapplication_obiccs1,
/Farm_bifoundation_domain/instance1/coreapplication_obisch1,
/Farm_bifoundation_domain/instance1/coreapplication_obips1,
/Farm_bifoundation_domain/instance1/coreapplication_obijh1.
thank

DPS Analytics, Download Started

Where is the difference between Download Started and Download Completed. Why is both shown in the Analytics-Tool?

See http://download.macromedia.com/pub/developer/dps/analytics-report/dps-analytics-report-gui de.pdf. Page 13 is the start of the explanations for all the download events.
Neil

Siebel Analytics:Java host is not getting started

Hi All,
I had a problem on java host service, when i start this service,it shows a message called
"the oracle java host service on local computer started and then stopped.some services stop automatically if they are not in use by other services or programs.".so someone help me to solve this problem"
thanks
Edited by: 964118 on Nov 8, 2012 9:54 AM

Are there any other installations that you might have done recently? Please make sure the environment parameter/variable is set to the right path with no spaces.
Refer: BI Java service issue in 11

In analytics, what happened to all the downloads started?

Hi guys,
In one of my folios i have 99 downloads started - pretty good i thought.
But out of those only 20 were completed, 6 had download errors and 17 were cancelled... that's only 43.
What happened to the other 46?
Any help would be appreciated - i'm sure others must be wondering the same thing.
Jen

Hi Jen,
Indeed, there was a similar post few days ago.
There could be 3 causes why the sum of Issue Download (Completed+Errors+Cancelled) is different than Issue Download Started:
User starts to download folio A ('Issue Download Started' event is sent for folio A). Before the current download ends, user starts to download folio B. In this case, another 'Issue Download Started' event is sent for folio B, but folio A will remain in 'Download Paused' state without reaching a final Download state (Completed/Errors/Cancelled). Only if the user will tap again on the folio A, the download will be resumed (following this scenario, user can start simultaneously several download, only the last download will reach a final download state). This is most probably the cause why you are seeing different numbers
User will start the download in the current day, but the final download state will be send in the next day. In this case, if the selected interval ends today, then the raport will not contain the final Download state
If the user has opt-in dialog enabled, it can select 'Don't Allow' tracking after the dowload starts and before the download will reach a final state. In this case, the events will not be sent
Hope this helps,
Ioan

SharePoint Foundation Site Web Analytics reports

Hi,
I am currently attempting to get the Site Web Analytics reports to work in SharePoint Foundation. However, there seems to be little available information regarding this. What is necessary for this to display a report? To start with, what
SharePoint & Windows services and SharePoint service applications need to be started? We use SQL Authentication for the content database because all the databases are in a different domain.
Any information someone can shed would be helpful.
Currently, when I navigate to the page it states "A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data for this site has not been processed yet." I have looked up this
information on the net, but nearly all information applies to SharePoint Server. I need help setting this up with SharePoint Foundation.
Thank you much.

Hi Steven,
Ahhh, I had a feeling that was a problem.
I had similar issues after installing SP1 so I could have some of the new features, like the storage report back for sites, and deleted sites going into the recycle bin. However, I had read that I *had* to install the June 30 CU as well, which may have been
a mistake. Because after installing both and running a psconfigui, it made things as flaky as they were during the beta.
It took my good, stable, trustworthy and solid SPF install and made it unstable. Managed Accounts started acting weird, permissions were odd, BDC service crapped out, user code errors, the works. Bummed me out. I basically blew out the server, did a fresh
install and restored from a farm backup (actually a full then differential, gotta love scheduling backups). Mind you, I could afford to do that, and I simply don't mess around with bad updates.
(I also found a post that said that if you have SP1 installed, a common error is if you delete a list, then delete the site, you can restore the site from recycle bin, but the list that was deleted from that site earlier cannot be restored-- so to avoid/fix
that problem, install the August CU... it's always something...)
Do you have backups of your farm pre-updates, preferably both, but at least the CU? Maybe you can do a restore on a virtual machine to see if it fixes your issues?
Also, here's another question. After you installed SP1 and the August CU, did you do a psconfigUI.exe (or at the command line, psconfig.exe)? It might be good and bad that you didn't (if you didn't). The way to check to see if you didn't is check the database
statuses (review database status under Upgrade and Patch Management in Central Admin). The statuses will say that the databases can be/should be updated if you didn't run psconfig. That means that SharePoint has updated, but the databases in SQL haven't.
Maybe you can make a copy of those databases, and try to attach those databases to a pre-update (sp1 and CU) SharePoint Foundation server to see if web analytics work there again. Although, if I am understanding correctly, some changes can occur on databases
during updates, but they're not complete til psconfig is run. But hey, it's worth a shot.
Or you can use psconfigui.exe (or psconfig.exe if you want to use the command line) to update the databases and see if that fixes the problem.
I'm sorry again about your issues if they are update related. It is so frustrating to think you are trying to stay up to date on your server, being a good admin, and instead it breaks important things without apology or way to fix it (since cumulative updates
cannot be uninstalled, but it is really difficult and potentially expensive to have to fully identical farms running side by side for testing).CA Callahan | Author: Mastering Windows SharePoint Service 3.0 and Mastering Microsoft SharePoint Foundation 2010 | Community Launch Leader |

Project Analytics 7.9.6.1 - Error while running a full load

Hi All,
I am performing a full load for Projects Analytics and get the following error,
=====================================
ERROR OUTPUT
=====================================
1103 SEVERE Wed Nov 18 02:49:36 WST 2009 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Gl_Account
1104 SEVERE Wed Nov 18 02:49:36 WST 2009
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_CodeDimension_Gl_Account:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Gl_Account
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
Session log initialises NULL value to mapping parameter MPLT_ADI_CODES.$$CATEGORY. This is then used insupsequent SQL and results in ORA-00936: missing expression error following are the initialization section and the load section containing the error in the log
Initialisation
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [ORA_11_5_10] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [ORA_11_5_10.DATAWAREHOUSE.SDE_ORA11510_Adaptor.SDE_ORA_CodeDimension_Gl_Account_Segments.log] for session parameter:[$PMSessionLogFile].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[MPLT_ADI_CODES.$$CATEGORY].
DIRECTOR> VAR_27028 Use override value [4] for mapping parameter:[MPLT_SA_ORA_CODES.$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27028 Use override value [DEFAULT] for mapping parameter:[MPLT_SA_ORA_CODES.$$TENANT_ID].
DIRECTOR> TM_6014 Initializing session [SDE_ORA_CodeDimension_Gl_Account_Segments] at [Wed Nov 18 02:49:11 2009].
DIRECTOR> TM_6683 Repository Name: [repo_service]
DIRECTOR> TM_6684 Server Name: [int_service]
DIRECTOR> TM_6686 Folder: [SDE_ORA11510_Adaptor]
DIRECTOR> TM_6685 Workflow: [SDE_ORA_CodeDimension_Gl_Account_Segments] Run Instance Name: [] Run Id: [17]
DIRECTOR> TM_6101 Mapping name: SDE_ORA_CodeDimension_GL_Account_Segments [version 1].
DIRECTOR> TM_6963 Pre 85 Timestamp Compatibility is Enabled
DIRECTOR> TM_6964 Date format for the Session is [MM/DD/YYYY HH24:MI:SS]
DIRECTOR> TM_6827 [C:\Informatica\PowerCenter8.6.1\server\infa_shared\Storage] will be used as storage directory for session [SDE_ORA_CodeDimension_Gl_Account_Segments].
DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
DIRECTOR> TM_6703 Session [SDE_ORA_CodeDimension_Gl_Account_Segments] is run by 32-bit Integration Service [node01_ASG596138], version [8.6.1], build [1218].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [UNICODE]
MAPPING> CMN_1570 Server Code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> TM_6151 The session sort order is [Binary].
MAPPING> TM_6185 Warning. Code page validation is disabled in this session.
MAPPING> TM_6156 Using low precision processing.
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6307 DTM error log disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [orcl], user [DAC_REP]
MAPPING> CMN_1716 Lookup [mplt_ADI_Codes.Lkp_Master_Map] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> CMN_1716 Lookup [mplt_ADI_Codes.Lkp_Master_Code] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> CMN_1716 Lookup [mplt_ADI_Codes.Lkp_W_CODE_D] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> TM_6007 DTM initialized successfully for session [SDE_ORA_CodeDimension_Gl_Account_Segments]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Wed Nov 18 02:49:14 2009)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Wed Nov 18 02:49:14 2009)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 32000000 bytes and Block size is 128000 bytes.
READER_1_1_1> DBG_21438 Reader: Source is [asgdev], user [APPS]
READER_1_1_1> BLKR_16051 Source database connection [ORA_11_5_10] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8147 Writer: Target is database [orcl], user [DAC_REP], bulk mode [OFF]
WRITER_1_*_1> WRT_8221 Target database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
WRITER_1_*_1> WRT_8124 Target Table W_CODE_D :SQL INSERT statement:
INSERT INTO W_CODE_D(DATASOURCE_NUM_ID,SOURCE_CODE,SOURCE_CODE_1,SOURCE_CODE_2,SOURCE_CODE_3,SOURCE_NAME_1,SOURCE_NAME_2,CATEGORY,LANGUAGE_CODE,MASTER_DATASOURCE_NUM_ID,MASTER_CODE,MASTER_VALUE,W_INSERT_DT,W_UPDATE_DT,TENANT_ID) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8124 Target Table W_CODE_D :SQL UPDATE statement:
UPDATE W_CODE_D SET SOURCE_CODE_1 = ?, SOURCE_CODE_2 = ?, SOURCE_CODE_3 = ?, SOURCE_NAME_1 = ?, SOURCE_NAME_2 = ?, MASTER_DATASOURCE_NUM_ID = ?, MASTER_CODE = ?, MASTER_VALUE = ?, W_INSERT_DT = ?, W_UPDATE_DT = ?, TENANT_ID = ? WHERE DATASOURCE_NUM_ID = ? AND SOURCE_CODE = ? AND CATEGORY = ? AND LANGUAGE_CODE = ?
WRITER_1_*_1> WRT_8124 Target Table W_CODE_D :SQL DELETE statement:
DELETE FROM W_CODE_D WHERE DATASOURCE_NUM_ID = ? AND SOURCE_CODE = ? AND CATEGORY = ? AND LANGUAGE_CODE = ?
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_CODE_D]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
Load section
*****START LOAD SESSION*****
Load Start Time: Wed Nov 18 02:49:16 2009
Target tables:
W_CODE_D
READER_1_1_1> RR_4029 SQ Instance [mplt_BC_ORA_Codes_GL_Account_Segments.Sq_Fnd_Flex_Values] User specified SQL Query [SELECT
FND_FLEX_VALUES.FLEX_VALUE_SET_ID,
FND_FLEX_VALUES.FLEX_VALUE,
MAX(FND_FLEX_VALUES_TL.DESCRIPTION),
FND_ID_FLEX_SEGMENTS.ID_FLEX_NUM,
FND_ID_FLEX_SEGMENTS.APPLICATION_COLUMN_NAME
FROM
FND_FLEX_VALUES,
FND_FLEX_VALUES_TL,
FND_ID_FLEX_SEGMENTS,
FND_SEGMENT_ATTRIBUTE_VALUES
WHERE
FND_FLEX_VALUES.FLEX_VALUE_ID = FND_FLEX_VALUES_TL.FLEX_VALUE_ID AND FND_FLEX_VALUES_TL.LANGUAGE ='US' AND
FND_ID_FLEX_SEGMENTS.FLEX_VALUE_SET_ID =FND_FLEX_VALUES.FLEX_VALUE_SET_ID AND
FND_ID_FLEX_SEGMENTS.APPLICATION_ID = 101 AND
FND_ID_FLEX_SEGMENTS.ID_FLEX_CODE ='GL#' AND
FND_ID_FLEX_SEGMENTS.ID_FLEX_NUM =FND_SEGMENT_ATTRIBUTE_VALUES.ID_FLEX_NUM AND
FND_SEGMENT_ATTRIBUTE_VALUES.APPLICATION_ID =101 AND
FND_SEGMENT_ATTRIBUTE_VALUES.ID_FLEX_CODE = 'GL#' AND
FND_ID_FLEX_SEGMENTS.APPLICATION_COLUMN_NAME=FND_SEGMENT_ATTRIBUTE_VALUES.APPLICATION_COLUMN_NAME AND
FND_SEGMENT_ATTRIBUTE_VALUES.ATTRIBUTE_VALUE ='Y'
GROUP BY
FND_FLEX_VALUES.FLEX_VALUE_SET_ID,
FND_FLEX_VALUES.FLEX_VALUE,
FND_ID_FLEX_SEGMENTS.ID_FLEX_NUM,
FND_ID_FLEX_SEGMENTS.APPLICATION_COLUMN_NAME]
READER_1_1_1> RR_4049 SQL Query issued to database : (Wed Nov 18 02:49:17 2009)
READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Nov 18 02:49:17 2009)
LKPDP_3> DBG_21312 Lookup Transformation [mplt_ADI_Codes.Lkp_W_CODE_D]: Lookup override sql to create cache: SELECT W_CODE_D.SOURCE_NAME_1 AS SOURCE_NAME_1, W_CODE_D.SOURCE_NAME_2 AS SOURCE_NAME_2, W_CODE_D.MASTER_DATASOURCE_NUM_ID AS MASTER_DATASOURCE_NUM_ID, W_CODE_D.MASTER_CODE AS MASTER_CODE, W_CODE_D.MASTER_VALUE AS MASTER_VALUE, W_CODE_D.W_INSERT_DT AS W_INSERT_DT, W_CODE_D.TENANT_ID AS TENANT_ID, W_CODE_D.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, W_CODE_D.SOURCE_CODE AS SOURCE_CODE, W_CODE_D.CATEGORY AS CATEGORY, W_CODE_D.LANGUAGE_CODE AS LANGUAGE_CODE FROM W_CODE_D
WHERE
W_CODE_D.CATEGORY IN () ORDER BY DATASOURCE_NUM_ID,SOURCE_CODE,CATEGORY,LANGUAGE_CODE,SOURCE_NAME_1,SOURCE_NAME_2,MASTER_DATASOURCE_NUM_ID,MASTER_CODE,MASTER_VALUE,W_INSERT_DT,TENANT_ID
LKPDP_3> TE_7212 Increasing [Index Cache] size for transformation [mplt_ADI_Codes.Lkp_W_CODE_D] from [1000000] to [4734976].
LKPDP_3> TE_7212 Increasing [Data Cache] size for transformation [mplt_ADI_Codes.Lkp_W_CODE_D] from [2000000] to [2007040].
READER_1_1_1> BLKR_16019 Read [625] rows, read [0] error rows for source table [FND_ID_FLEX_SEGMENTS] instance name [mplt_BC_ORA_Codes_GL_Account_Segments.FND_ID_FLEX_SEGMENTS]
READER_1_1_1> BLKR_16008 Reader run completed.
LKPDP_3> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_3:READER_1_1> DBG_21438 Reader: Source is [orcl], user [DAC_REP]
LKPDP_3:READER_1_1> BLKR_16051 Source database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
LKPDP_3:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_3:READER_1_1> BLKR_16007 Reader run started.
LKPDP_3:READER_1_1> RR_4049 SQL Query issued to database : (Wed Nov 18 02:49:18 2009)
LKPDP_3:READER_1_1> CMN_1761 Timestamp Event: [Wed Nov 18 02:49:18 2009]
LKPDP_3:READER_1_1> RR_4035 SQL Error [
ORA-00936: missing expression
Could you please suggest what the issue might be and how it can be fixed?
Many thanks,
Kiran

I have continued related detains in the following thread,
Mapping Parameter $$CATEGORY not included in the parameter file (7.9.6.1)
Apologies for the inconvenience.
Thanks,
Kiran

Error while using between operator with sql stmts in obiee 11g analytics

Hi All,
when I try to use between operator with two select queries in OBIEE 11g analytics, I'm getting the below error:
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Location: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <select>: Syntax error [nQSError: 26012] . (HY000)
can anyone help me out in resolving this issue.

Hi All,
Thank u all for ur replies, but I dint the exact solution for what I'm searching for.
If I use the condition as
"WHERE "Workforce Budget"."Used Budget Amount" BETWEEN MAX("Workforce Budget"."Total Eligible Salaries") AND MAX("Workforce Budget"."Published Worksheet Budget Amount"",
all the data will be grouped with the two columns which I'm considering in the condition.
my actual requirement with this query is to get the required date from a table to generate the report either as daily or weekly or monthly report. If I use repository variables, variables are not getting refreshed until I regenerate the server(which I should not do in my project). Hence I have created a table to hold weekly start and end dates and monthly start and end dates to pass the value to the actual report using between operator.
please could anyone help me on this, my release date is fast approaching.

Report Developer Control Of Applying Hints to Analytics Queries

There are numerous ways to apply hints to the queries generated by Analytics:
- Table level
- Join level
- Evaluate calculation
Each has its advantages and drawbacks.
- Table level: applies the hint to every query that references the table.
- Join level: applies the hint whenever the join is used in the query.
- Evaluate: allows the report developer to include a hint, but can't control where Analytics decides to apply the hint.
I propose another method for the report developer to apply hints, when needed, that uses join level hints. All the report developer
does is add the hint column to the Answer or add a filter based on the hint column to the Answer to apply the hint.
Setup
NOTE: I suggest you do consistency checks along the way, especially before starting work in the next Layer, to be sure that all setup errors are resolved early.
1) Start by defining a Logical SQL table in the Physical Layer using the following SQL: Select 1 Hint from dual
2) Alias this table for each hint to be defined for report developer usage. As an example, alias the hint table, creating
No Star and Parallel alias tables.
3) Join each alias to the physical layer fact tables, using a complex join, where the hint could be applied. In the Join definition screen, put the hint in the HINT field and enter 1=1 for
in the Expression section. Yes, we are creating a cartesian join between the hint and the other joining table. As the hint table always returns one and only one row, there
is no effect on the rows returned by the query. For No Star, you
put NO_STAR_TRANSFORMATION in the Hint field. For Parallel, you put PARALLEL(<physical table name>, default, default), where the physical table name
is the name of the actual database table, not the name of the alias table (Analytics will put the alias in the place of the database table name
when it generates the SQL). Additionally, for hints that have no parameters, you only need to join it
to the Fact tables in a query and not necessarily the dimensions. If you include fields from multiple fact tables, the hint will be applied
for each fact table. So, you may see the hint multiple times in the SQL (something like SELECT /*+ NO_STAR_TRANSFORMATION NO_STAR_TRANSFORMATION */ t00001.col1...)
4) Add the hint alias tables to the BMM Layer.
5) Rename the Hint field in each of the BMM hint tables to identify the hint being applied. For No Star, change the column name from Hint to No Star Hint. For Parallel,
change the column name from Hint to Parallel Hint.
6) Set the hint column as a key.
7) Join the BMM hint tables to the appropriate fact tables, using a complex join.
8) Define each hint table as a dimension.
9) Set the Logical Level in the Content tab in each of the sources of the joined tables to use the Detail of the hint dimension.
10) Create a folder in the Presentation Layer called Hints
11) Place each BMM hint field into the Presentation Layer Hints folder.
To apply a hint to your Answer, either add the Hint field to your Answer or create a filter where the Hint field is equal to/is in 1 (the number one). Check that the SQL generated
contains the hint, in Answers, go into Administration, Session Manager, and view the log for the user (the user log level will need to have been set to 7 to see the SQL generated).
Use of hints in more complex setups can be done by performing a setup of the hints that is parallel to the fact table setup. As an example, if you specify fragmentation content and a where
clause in your BMM for your fact tables, you would setup parallel physical layer hint tables and joins, BMM objects and joins, fragmentation content, and where clauses based on the
hint tables (only hint tables are referenced in the where clause).
As any database person knows, hints can either help or degrade the performance of queries. So, taking the SQL of the pre-hint Answer and figuring out which hints give the best
performance is suggested, prior to adding the hint fields/filters to the Answer.

Hi Oliver,
I would suggest you to have a look at the below WLST script which would give you the required report of the active threads and it would be send an email too.
Topic: Sending Email Alert for Threads Pool Health Using WLST
http://middlewaremagic.com/weblogic/?p=5433
Topic: Sending Email Alert for Hogger Threads Count Using WLST
http://middlewaremagic.com/weblogic/?p=5423
Also you can use the below script in case of the stuck threads, this script would send you an email with the thread dumps during the issue occurred.
Topic: Sending Email Alert For Stuck Threads With Thread Dumps
http://middlewaremagic.com/weblogic/?p=5582
Regards,
Ravish Mody

Error in Starting Weblogic Server 12c

Hi,
I get the below error when I run Weblogic server 12c. I am running it on Windows 7 Enterprise sp1.
I have installed the products. Oracle DB 11.2.0.1.0, RCU 11.1.1.6.0, Webcenter Portal & Content- 11.1.1.8.0
The main error I see is Opening of file based keystore failed from below log.
C:\Oracle\Middleware\user_projects\domains\New_domain\bin>startWebLogic.cmd >> log.txt
'C:\Oracle\MIDDLE~1\ORACLE~3\ucm\idc\bin\\Installer64' is not recognized as an internal or external command,
operable program or batch file.
'C:\Oracle\MIDDLE~1\ORACLE~3\ucm\idc\bin\\Installer' is not recognized as an internal or external command,
operable program or batch file.
'C:\Oracle\MIDDLE~1\ORACLE~3\ucm\idc\bin\\Installer' is not recognized as an internal or external command,
operable program or batch file.
'C:\Oracle\MIDDLE~1\ORACLE~3\ucm\idc\bin\\Installer' is not recognized as an internal or external command,
operable program or batch file.
FINDSTR: No search strings
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
6 Sep, 2013 2:27:09 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
WARNING: Opening of file based keystore failed.
JAVA Memory arguments: -Xms512m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_12.1.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\Oracle\MIDDLE~1\ORACLE~1\soa\modules\commons-cli-1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\Oracle\Middleware\oracle_common\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;C:\Oracle\Middleware\Oracle_WC1\wcps-services-app\modules\oracle.wcps_11.1.1\wcps-connection-mbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\xqrl.jar;C:\Oracle\MIDDLE~1\ORACLE~3\ucm\idc\jlib\idcloader.jar;C:\Oracle\MIDDLE~1\ORACLE~3\ucm\idc\components\NativeOsUtils\classes-NativeOsUtils.jar;
PATH=C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\app2\v.narasakumar.kuchi\product\11.2.0\dbhome_1\bin;C:\app1\v.narasakumar.kuchi\product\11.2.0\dbhome_1\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Java\jdk1.6.0_38\bin;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms512m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic.policy -Xverify:none -Djava.endorsed.dirs=C:\Oracle\MIDDLE~1\JDK160~1/jre/lib/endorsed;C:\Oracle\MIDDLE~1\WLSERV~1.1/endorsed -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.1 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\config\FMWCON~1\servers\AdminServer -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\servers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Djps.auth.debug=false -Dtangosol.coherence.log=jdk -DjiveHome=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\config\fmwconfig\servers\AdminServer\owc_discussions -DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.auth=ACC -Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.logging.impl.UserContextImpl -Doracle.webcenter.analytics.disable-native-partitioning=false -Doracle.webcenter.tagging.scopeTags=false -Djava.awt.headless=true -Doracle.webcenter.tagging.scopeTags=false -XX:+UseParallelGC -XX:+DisableExplicitGC -Dportlet.oracle.home=C:\Oracle\Middleware\oracle_common -Dwc.oracle.home=C:\Oracle\Middleware\Oracle_WC1 -Dipm.oracle.home=C:\Oracle\Middleware\Oracle_ECM1 -Doracle.capture.home=C:\Oracle\Middleware\Oracle_ECM1 -Ducm.oracle.home=C:\Oracle\MIDDLE~1\ORACLE~3 -Dirm.oracle.home=C:\Oracle\Middleware\Oracle_ECM1 -Dem.oracle.home=C:\Oracle\Middleware\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_classpath weblogic.Server
<6 Sep, 2013 2:27:03 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<6 Sep, 2013 2:27:03 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<6 Sep, 2013 2:27:03 PM IST> <Notice> <WebLogicServer> <BEA-000395> <The following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\user_projects\domains\New_domain\lib\mbeantypes\csp-id-asserter.jar;C:\Oracle\Middleware\user_projects\domains\New_domain\lib\mbeantypes\jps-wls-trustprovider.jar.>
<6 Sep, 2013 2:27:04 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc..>
<6 Sep, 2013 2:27:05 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13340309 Thu Feb 16 18:30:21 IST 2012
WebLogic Server Temporary Patch for 13019800 Mon Jan 16 16:53:54 IST 2012
WebLogic Server Temporary Patch for BUG13391585 Thu Feb 02 10:18:36 IST 2012
WebLogic Server Temporary Patch for 13516712 Mon Jan 30 15:09:33 IST 2012
WebLogic Server Temporary Patch for BUG13641115 Tue Jan 31 11:19:13 IST 2012
WebLogic Server Temporary Patch for BUG13603813 Wed Feb 15 19:34:13 IST 2012
WebLogic Server Temporary Patch for 13424251 Mon Jan 30 14:32:34 IST 2012
WebLogic Server Temporary Patch for 13361720 Mon Jan 30 15:24:05 IST 2012
WebLogic Server Temporary Patch for BUG13421471 Wed Feb 01 11:24:18 IST 2012
WebLogic Server Temporary Patch for BUG13657792 Thu Feb 23 12:57:33 IST 2012
WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >
<6 Sep, 2013 2:27:06 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<6 Sep, 2013 2:27:07 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
<6 Sep, 2013 2:27:07 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\New_domain\servers\AdminServer\logs\AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms, such as Windows.>
<6 Sep, 2013 2:27:07 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\New_domain\servers\AdminServer\logs\AdminServer.log00009. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\New_domain\servers\AdminServer\logs\AdminServer.log.>
<6 Sep, 2013 2:27:07 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\New_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<6 Sep, 2013 2:27:09 PM IST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
<6 Sep, 2013 2:27:09 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:148)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:170)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2984)
at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3226)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:406)
at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:352)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:122)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:88)
at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:164)
Truncated. see log file for complete stacktrace
>
<6 Sep, 2013 2:27:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>
<6 Sep, 2013 2:27:09 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>
<6 Sep, 2013 2:27:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
I get the same error when I execute "startWeblogic.cmd" from domain folder and bin folder.
Any help is appreciated. Thanks.

Hi,
Few comments here...
1) Seems your environment is not setup correctly but that is not the big cause here.....
2) This one is important, it seems that you installed weblogic using a different account and are trying to run it from a different account.
So the account with which you are trying to run weblogic does not have proper permission on
MW_HOME\user_projects\domains\bifoundation_domain\config\fmwconfig\bootstrap\cwallet.sso
Right click on the file and go in properties ..
Enable full control,modify,Read and execute,read and write permissions for the user you are trying to start weblogic and apply it.
if this simple steps doesnt work, please enable more logging by adding "-Djava.security.debug=jpspolicy" to startup option and grab more details.
Good Luck let me know if this works.

Error in starting OBIEE 11g BI services

Hi,
When i starting the BI services I am getting the following error in browser page.
Error:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
Url:
http://10.154.19.91:9704/analytics/saw.dll?bieehome&startPage=1
Adminserver log report:
Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.
How to solve this?
Thanks,

Hi sateesh,
Seems your database listerner and opmnctl is down....first start these in your services pane and then try starting your BI server....but keep in mind close the admin tool if it is open .
This might also help [http://gerardnico.com/wiki/dat/obiee/start_11g]
By,
KK

Starting analytics

Similar Messages

Maybe you are looking for