Starting and Stopping Instances from Netweaver Administrator does not work.

When we go to our http://<host>:<port>/nwa and navigate to Systems. We see our instances, although we see status and UNKNOWN.
Also, when we click down to see our server nodes, and try and restart them or stop them...we enter our user/pass for Unix and but it doesn't do anything.
Does anyone know what is involved to get this functionality to work? We're not looking install CCMS or anything like that, we just want th ability to start and stop our cluster from the central instance web administration screens.
Thanks,
-Tim

Just works for us, without needing any config.
If your running unix the alternative method is to use a tool called JCMON, much better than NWA.
log in as <sid>adm onto your host.
jcmon pf=/usr/sap/PEP/SYS/profile/PEP_JC00_xxxxx
for our production portal for example;
Which allows you to do admin on your java instance only.
use the menu options 10 - 21.
Message was edited by:
James Ibbotson
Message was edited by:
James Ibbotson

Similar Messages

Drag and drop activities from component palette does not work properly

I have problems with dragging and droping activities from component palette to bpel designer. I follow an sample to combine BPEL proces with Business role engine and try to drop decide activity bellow receiveInput activity but it is not picked up. Clicking on receiveInput activity and chosing with right mouse buttom insert after, decide activity is not in selection choise.

Hi,
I don't know what is causing the problem, but I have been able to avoid it by starting Jdeveloper from $home\jdev\bin\jdev.exe.
Regards,
Mathias

My old MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but suspect logic board, any ides any body

My old 17" MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but I suspect logic board. All checks out OK on the Apple Diagnostic bench. Can a Logic board go intermittant?? Any Ideas any body??

Ive repaired 1000s of laptops over the years (translate: diagnose and replace parts).
Its not that old, Ive owned 100s of laptops (most were free) ....some I still have are nearly 13 years old and still perfect, ....some extremely expensive ones died in under a year.
other than becoming obsolete at some point, there isnt really any "will spoil on" data like Milk for solid state computer parts, ....alas.
You can have a $5000 laptop die in 4 months, and a junker one keep kicking after 10 years.... Ive seen that firsthand countless times.
Common logic dictates that "very expensive = long life" in computers,..... but all the repair people will tell you just the opposite.
I know you have a gripe, I get that all too well honestly .

Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.' I have an invoice and the pickup notice from

Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.' I have an invoice and the pickup notice from Best Buy. What other information does Best Buy need? What will they do? Will I get a new box? What happened to the days of just typing in a simple s/n?

Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

HT1202 The manual mode to transfer music to my iTune from my iPhone does not work as described. When I click on Manually manage... it displays the warning message that all music on my iPhone will be erased and replaced by iTune music.

The manual mode to transfer music to my iTune from my iPhone does not work as described. When I click on Manually manage... it displays the warning message that all music on my iPhone will be erased and replaced by iTune music.
How can I transfer my music to a second computer iTune?
Thanks,

See this user tip
Syncing iPhone to a "New" Computer or replacing a "crashed" Hard Drive

I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren

en

I´ll check the messages. Elements 4.0.
Peter
9 dec 2014 kl. 18.44 skrev Jeff A Wright:
I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements? What version of Photoshop Elements are you installing?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Windows 7 Defrag from command line does not work

We are running Windows 7 in a virtualized environment. When running windows defrag using schedule or from command line, it does not work. The command that I am executing as administrator is
C:\Windows\system32>defrag /c
Microsoft Disk Defragmenter
Copyright (c) 2007 Microsoft Corp.
It displays the above message and exits back to the command prompt. However if I run the command defrag C: it does work. Defragmenting from the GUI works as well as long as both the disks (C: and System Reserved) are selected and when I click on
Defragment disks, works fine.
I am concerned about defrag running from the task scheduler with the command "defrag /c" (auto scheduled using Configure Schedule... from Disk Defragmenter) does not work and the system never gets defragmented automatically.
This happens only with some of the windows 7 VM's that we have.
There are no entries in Event Log that point to the defrag (using task scheduler). Any ideas what may be going on?

Hi,
Could you defrag as below method:
1. Open Disk Defragmenter by clicking the Start button. In the search box, type
Disk Defragmenter, and then, in the list of results, click
Disk Defragmenter.
2.Under Current status, select the disk you want to defragment.
3.To determine if the disk needs to be defragmented or not, click Analyze disk. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Once Windows is finished analyzing the disk, you can check the percentage of fragmentation on the disk in the
Last Run column. If the number is above 10%, you should defragment the disk.
4.Click Defragment disk. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
For more information, please read this article:
Ways to improve your computer's performance
http://windows.microsoft.com/en-in/windows/improve-performance-defragmenting-hard-disk#1TC=windows-7
Meanwhile, read this article:
Defrag from the Command-Line for More Complete
Control
http://technet.microsoft.com/en-us/magazine/ff458356.aspx
Karen Hu
TechNet Community Support

Why does right clinking on link and selecting open in new tab does not work?

Why does right clinking on link and selecting open in new tab does not work?
It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Hello, I just did an update and now the second Language - Hebrew - does not working. why?

Hello, I just did an update and now the second Language - Hebrew - does not working. why?

More information please.
If you are on adobe cloud, download indesign that support hebrew from CC desktop. Click on the preference gear on the top right then select App language.

For Macbook Pro Mid2010: Why not build a WiFi based AirDrop solution between iOS8 and Yosemite? Really sad it does not work.

For Macbook Pro Mid2010: Why not build a WiFi based AirDrop solution between iOS8 and Yosemite? Really sad it does not work.

Your Mac is too old
To Airdrop between a Mac an iOS device
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
From:
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

I updated my ad to iOS 6 and now my App Store app does not work, how can I get it back

I updated my iPad 2 with the latest iOS 6 and now my App Store application does not work right. The only part that does work is the genius, and the purchased, but I cannot search for any new apps now have the categories come up. I don't know how else to search for apps, and I don't know how to download this as it was pre installed.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

Last night I bought Adobe XI Pro and this morning the serial number does not work.

Last night I bought Adobe XI Pro and this morning the serial number does not work. [removed by moderator]

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

I found this plugin which solved pretty much all of my mail font rendering problems. It is designed for Lion, so don't know whether it will work but thought I would offer it up.
http://noware-it.zxq.net/

Starting and Stopping Instances from Netweaver Administrator does not work.

Similar Messages

Maybe you are looking for